SHARE
TWEET

Untitled

a guest Aug 28th, 2019 173 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. sudo cat /etc/samba/smb.conf
  2. #
  3. # Sample configuration file for the Samba suite for Debian GNU/Linux.
  4. #
  5. #
  6. # This is the main Samba configuration file. You should read the
  7. # smb.conf(5) manual page in order to understand the options listed
  8. # here. Samba has a huge number of configurable options most of which
  9. # are not shown in this example
  10. #
  11. # Some options that are often worth tuning have been included as
  12. # commented-out examples in this file.
  13. #  - When such options are commented with ";", the proposed setting
  14. #    differs from the default Samba behaviour
  15. #  - When commented with "#", the proposed setting is the default
  16. #    behaviour of Samba but the option is considered important
  17. #    enough to be mentioned here
  18. #
  19. # NOTE: Whenever you modify this file you should run the command
  20. # "testparm" to check that you have not made any basic syntactic
  21. # errors.
  22.  
  23. #======================= Global Settings =======================
  24.  
  25. [global]
  26.  
  27. ## Browsing/Identification ###
  28.  
  29. # Change this to the workgroup/NT-domain name your Samba server will part of
  30.    workgroup = WORKGROUP
  31.  
  32. client max protocol = NT1
  33.  
  34. # server string is the equivalent of the NT Description field
  35.    server string = %h server (Samba, Ubuntu)
  36.  
  37. #### Networking ####
  38.  
  39. # The specific set of interfaces / networks to bind to
  40. # This can be either the interface name or an IP address/netmask;
  41. # interface names are normally preferred
  42. ;   interfaces = 127.0.0.0/8 eth0
  43.  
  44. # Only bind to the named interfaces and/or networks; you must use the
  45. # 'interfaces' option above to use this.
  46. # It is recommended that you enable this feature if your Samba machine is
  47. # not protected by a firewall or is a firewall itself.  However, this
  48. # option cannot handle dynamic or non-broadcast interfaces correctly.
  49. ;   bind interfaces only = yes
  50.  
  51.  
  52.  
  53. #### Debugging/Accounting ####
  54.  
  55. # This tells Samba to use a separate log file for each machine
  56. # that connects
  57.    log file = /var/log/samba/log.%m
  58.  
  59. # Cap the size of the individual log files (in KiB).
  60.    max log size = 1000
  61.  
  62. # We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
  63. # Append syslog@1 if you want important messages to be sent to syslog too.
  64.    logging = file
  65.  
  66. # Do something sensible when Samba crashes: mail the admin a backtrace
  67.    panic action = /usr/share/samba/panic-action %d
  68.  
  69.  
  70. ####### Authentication #######
  71.  
  72. # Server role. Defines in which mode Samba will operate. Possible
  73. # values are "standalone server", "member server", "classic primary
  74. # domain controller", "classic backup domain controller", "active
  75. # directory domain controller".
  76. #
  77. # Most people will want "standalone server" or "member server".
  78. # Running as "active directory domain controller" will require first
  79. # running "samba-tool domain provision" to wipe databases and create a
  80. # new domain.
  81.    server role = standalone server
  82.  
  83.    obey pam restrictions = yes
  84.  
  85. # This boolean parameter controls whether Samba attempts to sync the Unix
  86. # password with the SMB password when the encrypted SMB password in the
  87. # passdb is changed.
  88.    unix password sync = yes
  89.  
  90. # For Unix password sync to work on a Debian GNU/Linux system, the following
  91. # parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
  92. # sending the correct chat script for the passwd program in Debian Sarge).
  93.    passwd program = /usr/bin/passwd %u
  94.    passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
  95.  
  96. # This boolean controls whether PAM will be used for password changes
  97. # when requested by an SMB client instead of the program listed in
  98. # 'passwd program'. The default is 'no'.
  99.    pam password change = yes
  100.  
  101. # This option controls how unsuccessful authentication attempts are mapped
  102. # to anonymous connections
  103.    map to guest = bad user
  104.  
  105. ########## Domains ###########
  106.  
  107. #
  108. # The following settings only takes effect if 'server role = primary
  109. # classic domain controller', 'server role = backup domain controller'
  110. # or 'domain logons' is set
  111. #
  112.  
  113. # It specifies the location of the user's
  114. # profile directory from the client point of view) The following
  115. # required a [profiles] share to be setup on the samba server (see
  116. # below)
  117. ;   logon path = \\%N\profiles\%U
  118. # Another common choice is storing the profile in the user's home directory
  119. # (this is Samba's default)
  120. #   logon path = \\%N\%U\profile
  121.  
  122. # The following setting only takes effect if 'domain logons' is set
  123. # It specifies the location of a user's home directory (from the client
  124. # point of view)
  125. ;   logon drive = H:
  126. #   logon home = \\%N\%U
  127.  
  128. # The following setting only takes effect if 'domain logons' is set
  129. # It specifies the script to run during logon. The script must be stored
  130. # in the [netlogon] share
  131. # NOTE: Must be store in 'DOS' file format convention
  132. ;   logon script = logon.cmd
  133.  
  134. # This allows Unix users to be created on the domain controller via the SAMR
  135. # RPC pipe.  The example command creates a user account with a disabled Unix
  136. # password; please adapt to your needs
  137. ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
  138.  
  139. # This allows machine accounts to be created on the domain controller via the
  140. # SAMR RPC pipe.  
  141. # The following assumes a "machines" group exists on the system
  142. ; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
  143.  
  144. # This allows Unix groups to be created on the domain controller via the SAMR
  145. # RPC pipe.  
  146. ; add group script = /usr/sbin/addgroup --force-badname %g
  147.  
  148. ############ Misc ############
  149.  
  150. # Using the following line enables you to customise your configuration
  151. # on a per machine basis. The %m gets replaced with the netbios name
  152. # of the machine that is connecting
  153. ;   include = /home/samba/etc/smb.conf.%m
  154.  
  155. # Some defaults for winbind (make sure you're not using the ranges
  156. # for something else.)
  157. ;   idmap config * :              backend = tdb
  158. ;   idmap config * :              range   = 3000-7999
  159. ;   idmap config YOURDOMAINHERE : backend = tdb
  160. ;   idmap config YOURDOMAINHERE : range   = 100000-999999
  161. ;   template shell = /bin/bash
  162.  
  163. # Setup usershare options to enable non-root users to share folders
  164. # with the net usershare command.
  165.  
  166. # Maximum number of usershare. 0 means that usershare is disabled.
  167. #   usershare max shares = 100
  168.  
  169. # Allow users who've been granted usershare privileges to create
  170. # public shares, not just authenticated ones
  171.    usershare allow guests = yes
  172.  
  173. #======================= Share Definitions =======================
  174.  
  175. # Un-comment the following (and tweak the other settings below to suit)
  176. # to enable the default home directory shares. This will share each
  177. # user's home directory as \\server\username
  178. ;[homes]
  179. ;   comment = Home Directories
  180. ;   browseable = no
  181.  
  182. # By default, the home directories are exported read-only. Change the
  183. # next parameter to 'no' if you want to be able to write to them.
  184. ;   read only = yes
  185.  
  186. # File creation mask is set to 0700 for security reasons. If you want to
  187. # create files with group=rw permissions, set next parameter to 0775.
  188. ;   create mask = 0700
  189.  
  190. # Directory creation mask is set to 0700 for security reasons. If you want to
  191. # create dirs. with group=rw permissions, set next parameter to 0775.
  192. ;   directory mask = 0700
  193.  
  194. # By default, \\server\username shares can be connected to by anyone
  195. # with access to the samba server.
  196. # Un-comment the following parameter to make sure that only "username"
  197. # can connect to \\server\username
  198. # This might need tweaking when using external authentication schemes
  199. ;   valid users = %S
  200.  
  201. # Un-comment the following and create the netlogon directory for Domain Logons
  202. # (you need to configure Samba to act as a domain controller too.)
  203. ;[netlogon]
  204. ;   comment = Network Logon Service
  205. ;   path = /home/samba/netlogon
  206. ;   guest ok = yes
  207. ;   read only = yes
  208.  
  209. # Un-comment the following and create the profiles directory to store
  210. # users profiles (see the "logon path" option above)
  211. # (you need to configure Samba to act as a domain controller too.)
  212. # The path below should be writable by all users so that their
  213. # profile directory may be created the first time they log on
  214. ;[profiles]
  215. ;   comment = Users profiles
  216. ;   path = /home/samba/profiles
  217. ;   guest ok = no
  218. ;   browseable = no
  219. ;   create mask = 0600
  220. ;   directory mask = 0700
  221.  
  222. [printers]
  223.    comment = All Printers
  224.    browseable = no
  225.    path = /var/spool/samba
  226.    printable = yes
  227.    guest ok = no
  228.    read only = yes
  229.    create mask = 0700
  230.  
  231. # Windows clients look for this share name as a source of downloadable
  232. # printer drivers
  233. [print$]
  234.    comment = Printer Drivers
  235.    path = /var/lib/samba/printers
  236.    browseable = yes
  237.    read only = yes
  238.    guest ok = no
  239. # Uncomment to allow remote administration of Windows print drivers.
  240. # You may need to replace 'lpadmin' with the name of the group your
  241. # admin users are members of.
  242. # Please note that you also need to set appropriate Unix permissions
  243. # to the drivers directory for these users to have write rights in it
  244. ;   write list = root, @lpadmin
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top