Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Device Model: WDC WD140EFGX-68B0GN0
- Serial Number: Y5KW4U6C
- LU WWN Device Id: 5 000cca 28ef69e99
- Firmware Version: 85.00A85
- User Capacity: 14,000,519,643,136 bytes [14.0 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database 7.3/5319
- ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Tue Mar 26 18:42:56 2024 CET
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 101) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: (1333) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x000b 100 100 001 Pre-fail Always - 0
- 2 Throughput_Performance 0x0004 134 134 054 Old_age Offline - 104
- 3 Spin_Up_Time 0x0007 081 081 001 Pre-fail Always - 390 (Average 390)
- 4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 181
- 5 Reallocated_Sector_Ct 0x0033 100 100 001 Pre-fail Always - 0
- 7 Seek_Error_Rate 0x000a 100 100 001 Old_age Always - 0
- 8 Seek_Time_Performance 0x0004 128 128 020 Old_age Offline - 18
- 9 Power_On_Hours 0x0012 097 097 000 Old_age Always - 22072
- 10 Spin_Retry_Count 0x0012 100 100 001 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 180
- 22 Unknown_Attribute 0x0023 100 100 025 Pre-fail Always - 100
- 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 6384
- 193 Load_Cycle_Count 0x0012 100 100 000 Old_age Always - 6384
- 194 Temperature_Celsius 0x0002 039 039 000 Old_age Always - 40 (Min/Max 12/52)
- 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
- 197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x000a 100 100 000 Old_age Always - 0
- SMART Error Log Version: 1
- No Errors Logged
- SMART Self-test log structure revision number 1
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement