Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019
- [ 0.000000] Boot CPU: AArch64 Processor [411fd071]
- [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
- [ 0.000000] OF: fdt: - 80000000 , 7ee00000
- [ 0.000000] OF: fdt: - 100000000 , 7f200000
- [ 0.000000] Found tegra_fbmem: 00140000@92cb6000
- [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
- [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
- [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
- [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
- [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
- [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
- [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
- [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
- [ 0.000000] On node 0 totalpages: 1039872
- [ 0.000000] DMA zone: 8192 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 519168 pages, LIFO batch:31
- [ 0.000000] Normal zone: 8136 pages used for memmap
- [ 0.000000] Normal zone: 520704 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.1
- [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefcb000 s53400 r8192 d32616 u94208
- [ 0.000000] pcpu-alloc: s53400 r8192 d32616 u94208 alloc=23*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] CPU features: enabling workaround for ARM erratum 832075
- [ 0.000000] Speculative Store Bypass Disable mitigation not required
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
- [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 tegra_fbmem=0x140000@0x92cb6000 is_hdmi_initialised=1 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait
- [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
- [ 0.000000] log_buf_len min size: 32768 bytes
- [ 0.000000] log_buf_len: 131072 bytes
- [ 0.000000] early log buf free: 29384(89%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.000000] Memory: 3574752K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 109600K reserved, 475136K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
- [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
- [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB)
- [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB)
- [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB)
- [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB)
- [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB)
- [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
- [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
- [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
- [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
- [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Build-time adjustment of leaf fanout to 64.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
- [ 0.000000] NR_IRQS:64 nr_irqs:64 0
- [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
- [ 0.000000] t210 clock and reset probe
- [ 0.000000] boot misc1 0x90000000: expected 0x10000000
- [ 0.000000] (comparison mask = 0xf8000000)
- [ 0.000000] boot misc2 0x0: expected 0xf6e0f620
- [ 0.000000] (comparison mask = 0xffffffff)
- [ 0.000000] boot misc3 0x559: expected 0x10000
- [ 0.000000] (comparison mask = 0xffffffff)
- [ 0.000000] PLL_D2 already enabled. Postponing set full defaults
- [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
- [ 0.000000] clk_cbus_recalc_rate: no gbus parent
- [ 0.000000] clk_cbus_recalc_rate: no gbus parent
- [ 0.000000] clk_cbus_recalc_rate: no gbus parent
- [ 0.000000] clk_cbus_recalc_rate: no gbus parent
- [ 0.000000] clk_cbus_recalc_rate: no gbus parent
- [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.001480] Console: colour dummy device 80x25
- [ 0.002412] console [tty0] enabled
- [ 0.002439] kmemleak: Kernel memory leak detector disabled
- [ 0.002467] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.002495] pid_max: default: 32768 minimum: 301
- [ 0.002953] Security Framework initialized
- [ 0.003186] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.003206] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.004420] ftrace: allocating 46802 entries in 183 pages
- [ 0.175609] sched-energy: CPU device node has no sched-energy-costs
- [ 0.175640] ASID allocator initialised with 65536 entries
- [ 0.211444] tegra-id: chipid=22117.
- [ 0.211484] tegra-id: opt_subrevision=0.
- [ 0.211512] Tegra Speedo/IDDQ fuse revision 4
- [ 0.211527] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
- [ 0.211543] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
- [ 0.211559] Tegra: CPU Speedo Value 2028, SoC Speedo Value 1909, GPU Speedo Value 2010
- [ 0.211579] Tegra: CPU IDDQ Value 1648, SoC IDDQ Value 1728, GPU IDDQ Value 2085
- [ 0.211616] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
- [ 0.211641] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
- [ 0.211668] DTB Build time: Jul 8 2019 15:52:30
- [ 0.261053] CPU1: Booted secondary processor [411fd071]
- [ 0.292975] CPU2: Booted secondary processor [411fd071]
- [ 0.324964] CPU3: Booted secondary processor [411fd071]
- [ 0.325053] Brought up 4 CPUs
- [ 0.325116] SMP: Total of 4 processors activated.
- [ 0.325132] CPU features: detected feature: 32-bit EL0 Support
- [ 0.325408] CPU: All CPU(s) started at EL2
- [ 0.325438] alternatives: patching kernel code
- [ 0.333455] devtmpfs: initialized
- [ 0.368115] Initilizing CustomIPI irq domain
- [ 0.368522] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.368568] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.379202] pinctrl core: initialized pinctrl subsystem
- [ 0.379840] OS set in device tree is not L4T.
- [ 0.380262] regulator-dummy: no parameters
- [ 0.380558] Initializing plugin-manager
- [ 0.380735] Plugin module not found
- [ 0.380949] node /plugin-manager/fragement@0 match with board >=3448-0000-100
- [ 0.381535] node /plugin-manager/fragment@1 match with board >=3448-0000-101
- [ 0.382279] node /plugin-manager/fragment@5 match with board 3449-0000-200
- [ 0.386041] NET: Registered protocol family 16
- [ 0.390228] pstore: using zlib compression
- [ 0.390907] console [pstore-1] enabled
- [ 0.390925] pstore: Registered ramoops as persistent store backend
- [ 0.390942] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
- [ 0.405072] cpuidle: using governor menu
- [ 0.408977] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
- [ 0.410495] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000)
- [ 0.410539] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.413487] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
- [ 0.415067] tegra_bpmp_of_clk_init: EMC proxy not found.
- [ 0.416009] tegra_powergate_init: DONE
- [ 0.416047] DTS File Name: ../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
- [ 0.416076] DTB Build time: Jul 8 2019 15:52:30
- [ 0.417656] Tegra reboot handler registered.
- [ 0.422017] iommu: Adding device tegra-carveouts to group 0
- [ 0.422190] platform tegra-carveouts: domain=ffffffc0f9b9b318 allocates as[0]=ffffffc0f940c0a8
- [ 0.422570] iommu: Adding device smmu_test to group 1
- [ 0.422638] platform smmu_test: domain=ffffffc0f9b9b558 allocates as[0]=ffffffc0f940c110
- [ 0.423463] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
- [ 0.423539] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
- [ 0.423618] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
- [ 0.423641] nv-tegra-mc 70019000.mc: No mssnvlink node
- [ 0.423676] mc-err: mcerr ops are set to t21x
- [ 0.433395] iommu: Adding device 70090000.xusb to group 2
- [ 0.433706] iommu: Adding device 70006000.serial to group 3
- [ 0.433801] platform 70006000.serial: domain=ffffffc0f94a9618 allocates as[0]=ffffffc0f940c178
- [ 0.434247] iommu: Adding device 70006040.serial to group 4
- [ 0.434535] iommu: Adding device 70006200.serial to group 5
- [ 0.434771] iommu: Adding device sound to group 6
- [ 0.434837] platform sound: domain=ffffffc0f94a9b58 allocates as[0]=ffffffc0f940c1e0
- [ 0.435414] iommu: Adding device 7000d400.spi to group 7
- [ 0.435693] iommu: Adding device 7000d600.spi to group 8
- [ 0.435979] iommu: Adding device 70410000.spi to group 9
- [ 0.436297] iommu: Adding device 50000000.host1x to group 10
- [ 0.436585] iommu: Adding device 54080000.vi to group 11
- [ 0.437033] iommu: Adding device 54600000.isp to group 12
- [ 0.437333] iommu: Adding device 54680000.isp to group 13
- [ 0.437658] iommu: Adding device tegradc.0 to group 14
- [ 0.437727] platform tegradc.0: domain=ffffffc0f94b6a98 allocates as[0]=ffffffc0f940c248
- [ 0.439136] platform tegradc.0: IOVA linear map 0x0000000092cb6000(140000)
- [ 0.439547] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
- [ 0.439885] iommu: Adding device tegradc.1 to group 15
- [ 0.439954] platform tegradc.1: domain=ffffffc0f94b6cd8 allocates as[0]=ffffffc0f940c2b0
- [ 0.441501] platform tegradc.1: IOVA linear map 0x0000000092cb6000(140000)
- [ 0.441913] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
- [ 0.442181] iommu: Adding device 54340000.vic to group 16
- [ 0.442409] iommu: Adding device 544c0000.nvenc to group 17
- [ 0.442625] iommu: Adding device 54500000.tsec to group 18
- [ 0.442835] iommu: Adding device 54100000.tsecb to group 19
- [ 0.443064] iommu: Adding device 54480000.nvdec to group 20
- [ 0.443304] iommu: Adding device 54380000.nvjpg to group 21
- [ 0.444342] iommu: Adding device 546c0000.i2c to group 22
- [ 0.444683] iommu: Adding device 57000000.gpu to group 23
- [ 0.444746] platform 57000000.gpu: domain=ffffffc0f94c3cd8 allocates as[0]=ffffffc0f940c318
- [ 0.444805] platform 57000000.gpu: domain=ffffffc0f94c3cd8 allocates as[1]=ffffffc0f940c380
- [ 0.444863] platform 57000000.gpu: domain=ffffffc0f94c3cd8 allocates as[2]=ffffffc0f940c3e8
- [ 0.444918] platform 57000000.gpu: domain=ffffffc0f94c3cd8 allocates as[3]=ffffffc0f940c450
- [ 0.445840] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
- [ 0.445882] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
- [ 0.445912] tegra-pmc: ### PMC reset source: TEGRA_SOFTWARE_RESET
- [ 0.445933] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
- [ 0.445949] tegra-pmc: ### PMC reset status reg: 0x3
- [ 0.497153] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
- [ 0.497188] tegra-pmc: Clear bootloader IO dpd settings
- [ 0.497222] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
- [ 0.497302] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
- [ 0.497611] iommu: Adding device 70012000.se to group 24
- [ 0.498391] iommu: Adding device 7000c000.i2c to group 25
- [ 0.498662] iommu: Adding device 7000c400.i2c to group 26
- [ 0.498933] iommu: Adding device 7000c500.i2c to group 27
- [ 0.499199] iommu: Adding device 7000c700.i2c to group 28
- [ 0.499496] iommu: Adding device 7000d000.i2c to group 29
- [ 0.499762] iommu: Adding device 7000d100.i2c to group 30
- [ 0.500074] iommu: Adding device sdhci-tegra.0 to group 31
- [ 0.500143] platform sdhci-tegra.0: domain=ffffffc0f9581e58 allocates as[0]=ffffffc0f940c4b8
- [ 0.501035] iommu: Adding device 700d0000.xudc to group 32
- [ 0.505553] vdd-ac-bat: 5000 mV
- [ 0.505923] vdd-5v0-sys: 5000 mV
- [ 0.506923] vdd-5v0-hdmi: supplied by vdd-5v0-sys
- [ 0.507004] vdd-5v0-hdmi: 5000 mV
- [ 0.507435] vdd-1v8: 1800 mV
- [ 0.507834] vdd-fan: supplied by vdd-5v0-sys
- [ 0.507888] vdd-fan: 5000 mV
- [ 0.508299] vdd-usb-vbus: supplied by vdd-5v0-sys
- [ 0.508376] vdd-usb-vbus: 5000 mV
- [ 0.508925] vdd-usb-vbus2: 5000 mV
- [ 0.534004] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.536477] GPIO line 151 (camera-control-output-low) hogged as output/low
- [ 0.536857] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
- [ 0.546005] eventlib_kernel: keventlib is initialized, test id: 0
- [ 0.546406] SCSI subsystem initialized
- [ 0.546645] libata version 3.00 loaded.
- [ 0.546922] usbcore: registered new interface driver usbfs
- [ 0.546992] usbcore: registered new interface driver hub
- [ 0.547081] usbcore: registered new device driver usb
- [ 0.551175] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
- [ 0.552896] random: fast init done
- [ 0.556398] vdd-core: 600 <--> 1162 mV at 1125 mV
- [ 0.557577] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
- [ 0.560400] vdd-ddr-1v1: 1150 mV
- [ 0.565173] vdd-pre-reg-1v35: 1350 mV
- [ 0.569070] vdd-1v8: 1800 mV
- [ 0.569341] vdd-1v8: Failed to create debugfs directory
- [ 0.573067] avdd-sys-1v2: 1200 mV
- [ 0.577066] vdd-pex-1v0: 1050 mV
- [ 0.577838] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
- [ 0.578476] max77620-ldo3: at 3100 mV
- [ 0.581070] vdd-rtc: 850 <--> 1100 mV at 1000 mV
- [ 0.581729] max77620-ldo5: at 3100 mV
- [ 0.582371] max77620-ldo6: at 2800 mV
- [ 0.585067] avdd-1v05-pll: 1050 mV
- [ 0.589067] avdd-io-hdmi-dp: 1050 mV
- [ 0.590418] GPIO line 505 (spmic-default-output-high) hogged as output/high
- [ 0.590708] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
- [ 0.592806] max77620 4-003c: max77620 probe successful
- [ 0.595197] i2c i2c-6: Unbalanced pm_runtime_enable!
- [ 0.595755] media: Linux media interface: v0.10
- [ 0.595818] Linux video capture interface: v2.00
- [ 0.596758] pps_core: LinuxPPS API ver. 1 registered
- [ 0.596785] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
- [ 0.596826] PTP clock support registered
- [ 0.600249] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
- [ 0.606682] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
- [ 0.607600] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.608279] Bluetooth: Core ver 2.22
- [ 0.608355] NET: Registered protocol family 31
- [ 0.608373] Bluetooth: HCI device and connection manager initialized
- [ 0.608400] Bluetooth: HCI socket layer initialized
- [ 0.608422] Bluetooth: L2CAP socket layer initialized
- [ 0.608457] Bluetooth: SCO socket layer initialized
- [ 0.610223] tegra210_dvfs: no clock found for sdmmc2_ddr
- [ 0.610261] tegra210_dvfs: no clock found for sdmmc4_ddr
- [ 0.610321] tegra210_dvfs: no clock found for sdmmc1_ddr
- [ 0.610349] tegra210_dvfs: no clock found for sdmmc3_ddr
- [ 0.613384] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
- [ 0.614953] vdd-3v3-sys: supplied by vdd-5v0-sys
- [ 0.615040] vdd-3v3-sys: 3300 mV
- [ 0.615342] vdd-1v8: supplied by vdd-3v3-sys
- [ 0.617142] vdd-usb-vbus2: supplied by vdd-3v3-sys
- [ 0.617689] vdd-3v3-sd: supplied by vdd-3v3-sys
- [ 0.617746] vdd-3v3-sd: 3300 mV
- [ 0.618733] avdd-io-edp-1v05: supplied by avdd-1v05-pll
- [ 0.618794] avdd-io-edp-1v05: 1050 mV
- [ 0.619282] vdd-usb-hub-en: supplied by vdd-1v8
- [ 0.619356] vdd-usb-hub-en: 5000 mV
- [ 0.619737] en-vdd-cam-hv-2v8_maza: 2800 mV
- [ 0.620111] en-vdd-cam-1v2_maza: 1200 mV
- [ 0.620475] en-vdd-cam-maza: 3300 mV
- [ 0.622070] camchar: rtcpu character device driver loaded
- [ 0.622813] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
- [ 0.624199] clocksource: Switched to clocksource arch_sys_counter
- [ 0.664139] VFS: Disk quotas dquot_6.6.0
- [ 0.664350] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.664853] nvmap_heap_init: nvmap_heap_init: created heap block cache
- [ 0.665284] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
- [ 0.665331] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
- [ 0.665558] cma: enabled page replacement for spfn=d7000, epfn=f0000
- [ 0.665584] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
- [ 0.665613] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
- [ 0.665664] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
- [ 0.665692] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
- [ 0.665722] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
- [ 0.665745] nvmap_page_pool_init: Total RAM pages: 1012472
- [ 0.665762] nvmap_page_pool_init: nvmap page pool size: 126559 pages (494 MB)
- [ 0.665877] nvmap_background_zero_thread: PP zeroing thread starting.
- [ 0.666305] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
- [ 0.667295] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
- [ 0.675580] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
- [ 0.675994] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
- [ 0.676285] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
- [ 0.676522] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
- [ 0.676725] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
- [ 0.677011] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
- [ 0.677033] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
- [ 0.677474] NET: Registered protocol family 2
- [ 0.678442] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- [ 0.678677] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
- [ 0.679184] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.679352] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.679447] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.679872] NET: Registered protocol family 1
- [ 0.680639] RPC: Registered named UNIX socket transport module.
- [ 0.680668] RPC: Registered udp transport module.
- [ 0.680686] RPC: Registered tcp transport module.
- [ 0.680703] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.680727] PCI: CLS 0 bytes, default 64
- [ 0.680960] Trying to unpack rootfs image as initramfs...
- [ 0.690275] host1x 50000000.host1x: initialized
- [ 0.692150] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 0.695651] audit: initializing netlink subsys (disabled)
- [ 0.695760] audit: type=2000 audit(0.543:1): initialized
- [ 0.696560] workingset: timestamp_bits=46 max_order=20 bucket_order=0
- [ 0.706586] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.708112] ntfs: driver 2.1.32 [Flags: R/W].
- [ 0.709126] 9p: Installing v9fs 9p2000 file system support
- [ 0.712403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
- [ 0.712587] io scheduler noop registered
- [ 0.712895] io scheduler cfq registered (default)
- [ 0.715565] gic 702f9000.agic: GIC IRQ controller registered
- [ 0.718590] iommu: Adding device 702ef000.adsp to group 33
- [ 0.725755] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
- [ 0.725936] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
- [ 0.726571] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x8a08410
- [ 0.726605] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
- [ 0.728430] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
- [ 0.728573] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
- [ 0.728696] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
- [ 0.728918] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
- [ 0.729030] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
- [ 0.729144] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
- [ 0.729253] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
- [ 0.729372] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
- [ 0.729480] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
- [ 0.729592] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
- [ 0.735707] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
- [ 0.737057] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
- [ 0.738917] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
- [ 0.740280] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
- [ 0.740647] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
- [ 0.741843] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
- [ 0.742087] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=4687500, vi_iso_bw=750000, max_bw=4687500
- [ 0.742351] Adding domain tsec-pd to PM domain host1x-pd
- [ 0.744335] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
- [ 0.745320] tsec 54500000.tsec: initialized
- [ 0.746897] tsec 54100000.tsecb: initialized
- [ 0.747609] Adding domain nvdec-pd to PM domain host1x-pd
- [ 0.750832] nvdec 54480000.nvdec: initialized
- [ 0.751933] Adding domain vic03-pd to PM domain host1x-pd
- [ 0.752135] Adding domain msenc-pd to PM domain host1x-pd
- [ 0.752347] Adding domain nvjpg-pd to PM domain host1x-pd
- [ 0.755962] falcon 54340000.vic: initialized
- [ 0.757279] falcon 544c0000.nvenc: initialized
- [ 0.758631] falcon 54380000.nvjpg: initialized
- [ 0.763043] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
- [ 0.763174] display board info: id 0x0, fab 0x0
- [ 0.763246] generic_infoframe_type: 0x87
- [ 0.763389] tegradc tegradc.0: DT parsed successfully
- [ 0.763450] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
- [ 0.764028] tegradc tegradc.0: Bootloader disp_param detected. Detected mode: 640x480 (on 0x0mm) pclk=25173906
- [ 0.767025] tegradc tegradc.0: probed
- [ 0.771181] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
- [ 0.775924] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels
- [ 0.776880] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
- [ 0.777260] kfuse 7000fc00.kfuse: initialized
- [ 0.778788] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
- [ 0.779821] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
- [ 0.781287] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
- [ 0.781331] vdd-cpu: 708 <--> 1322 mV at 708 mV
- [ 0.781843] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
- [ 0.783480] vdd-gpu: applied init 1000000uV constraint
- [ 0.783510] vdd-gpu: 708 <--> 1323 mV at 997 mV
- [ 0.783927] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
- [ 0.788706] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.788901] No Device Node present for smmu client: serial8250 !!
- [ 0.788937] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
- [ 0.789037] iommu: Adding device serial8250 to group 35
- [ 0.792517] console [ttyS0] disabled
- [ 0.792675] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
- [ 1.279652] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
- [ 1.683972] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
- [ 2.088311] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
- [ 2.090328] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
- [ 2.090747] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
- [ 2.090756] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 2.090760] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
- [ 2.090766] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
- [ 2.090771] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 2.090818] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
- [ 2.090942] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.091186] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.091357] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
- [ 2.091391] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
- [ 2.091435] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit]
- [ 2.091464] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit]
- [ 2.091657] pci 0000:01:00.0: supports D1 D2
- [ 2.091661] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 2.100336] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 2.100387] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
- [ 2.100393] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
- [ 2.100403] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
- [ 2.100428] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
- [ 2.100452] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
- [ 2.100463] pci 0000:00:02.0: PCI bridge to [bus 01]
- [ 2.100469] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
- [ 2.100476] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
- [ 2.101256] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
- [ 2.101261] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
- [ 2.101268] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
- [ 2.101399] aer 0000:00:02.0:pcie002: service driver aer loaded
- [ 3.209800] console [ttyS0] enabled
- [ 3.210181] Console: switching to colour frame buffer device 80x30
- [ 3.213468] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
- [ 3.213799] serial-tegra 70006200.serial: RX in PIO mode
- [ 3.213895] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
- [ 3.214896] [drm] Initialized
- [ 3.236272] brd: module loaded
- [ 3.247740] loop: module loaded
- [ 3.247842] tegra_profiler: version: 1.132, samples/io: 46/26
- [ 3.250674] tegra_profiler: auth: init
- [ 3.255198] THERMAL EST: found 2 subdevs
- [ 3.255204] THERMAL EST num_resources: 0
- [ 3.255208] [THERMAL EST subdev 0]
- [ 3.255216] [THERMAL EST subdev 1]
- [ 3.255669] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
- [ 3.255671] THERMAL EST: thz register success.
- [ 3.255828] THERMAL EST: end of probe, return err: 0
- [ 3.256936] hisi_sas: driver version v1.6
- [ 3.261741] tegra-qspi 70410000.spi: Prod settings list not found
- [ 3.262927] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
- [ 3.262934] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
- [ 3.270096] libphy: Fixed MDIO Bus: probed
- [ 3.270669] tun: Universal TUN/TAP device driver, 1.6
- [ 3.270671] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
- [ 3.271474] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 3.271476] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 3.271527] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
- [ 3.271529] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 3.271577] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 3.271579] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 3.271629] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
- [ 3.271632] Copyright(c) 1999 - 2017 Intel Corporation.
- [ 3.278462] r8168 0000:01:00.0: enabling device (0000 -> 0003)
- [ 3.278492] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
- [ 3.292705] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
- [ 3.292848] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e4:18:63 from device tree
- [ 3.293487] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
- [ 3.293524] r8168 Copyright (C) 2017 Realtek NIC software team <[email protected]>
- This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
- This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
- [ 3.294131] PPP generic driver version 2.4.2
- [ 3.294346] PPP BSD Compression module registered
- [ 3.294351] PPP Deflate Compression module registered
- [ 3.294395] PPP MPPE Compression module registered
- [ 3.294402] NET: Registered protocol family 24
- [ 3.294480] usbcore: registered new interface driver r8152
- [ 3.294521] usbcore: registered new interface driver asix
- [ 3.294578] usbcore: registered new interface driver ax88179_178a
- [ 3.294617] usbcore: registered new interface driver cdc_ether
- [ 3.294653] usbcore: registered new interface driver net1080
- [ 3.294696] usbcore: registered new interface driver cdc_subset
- [ 3.294728] usbcore: registered new interface driver zaurus
- [ 3.294785] usbcore: registered new interface driver cdc_ncm
- [ 3.294971] VFIO - User Level meta-driver version: 0.3
- [ 3.296359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.296386] ehci-pci: EHCI PCI platform driver
- [ 3.296439] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.296450] ohci-pci: OHCI PCI platform driver
- [ 3.296498] ohci-platform: OHCI generic platform driver
- [ 3.299250] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
- [ 3.299845] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
- [ 3.301003] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9138000 id
- [ 3.301116] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
- [ 3.301119] tegra-xusb 70090000.xusb: Falling back to user helper
- [ 3.302408] usbcore: registered new interface driver uas
- [ 3.302461] usbcore: registered new interface driver usb-storage
- [ 3.302571] usbcore: registered new interface driver usbserial
- [ 3.305701] tegra-xudc-new 700d0000.xudc: device count: 1
- [ 3.306955] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
- [ 3.306967] tegra-xudc-new 700d0000.xudc: vbus state: 0
- [ 3.307001] tegra-xudc-new 700d0000.xudc: entering ELPG
- [ 3.307256] tegra-xudc-new 700d0000.xudc: entering ELPG done
- [ 3.307918] mousedev: PS/2 mouse device common for all mice
- [ 3.308011] usbcore: registered new interface driver xpad
- [ 3.440495] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
- [ 3.443035] rtc rtc1: alarm rtc device
- [ 3.443053] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
- [ 3.443083] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
- [ 3.443682] i2c /dev entries driver
- [ 3.445771] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
- [ 3.469102] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
- [ 3.469177] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
- [ 3.469208] imx219 6-0010: board setup failed
- [ 3.469312] imx219: probe of 6-0010 failed with error -121
- [ 3.469623] imx274 6-001a: probing v4l2 sensor.
- [ 3.470495] imx274 6-001a: tegracam sensor driver:imx274_v2.0.6
- [ 3.470642] imx274 6-001a: Detected IMX274 sensor
- [ 3.471964] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
- [ 3.475003] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
- [ 3.475008] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
- [ 3.475466] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 3.475485] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
- [ 3.475494] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
- [ 3.475634] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 3.475644] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
- [ 3.475650] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
- [ 3.475794] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 3.475803] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
- [ 3.475808] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
- [ 3.475989] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
- [ 3.476931] tegra_aotag tegra-aotag: Registering sensor 0
- [ 3.476992] tegra_aotag tegra-aotag: Invalid temp readout
- [ 3.477018] tegra_aotag tegra-aotag: Invalid temp readout
- [ 3.477035] tegra_aotag tegra-aotag: Bound to TZ : ID 0
- [ 3.477043] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
- [ 3.477964] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 3.477985] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
- [ 3.478175] tegra_aotag tegra-aotag: Invalid temp readout
- [ 3.478205] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
- [ 3.478631] parse_throttle_dt_data: Num cap clks = 6
- [ 3.478635] parse_throttle_dt_data: clk=cclk_g type=2
- [ 3.478650] parse_throttle_dt_data: clk=gpu type=4
- [ 3.478677] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
- [ 3.478696] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
- [ 3.478717] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
- [ 3.478719] parse_throttle_dt_data: clk=emc type=3
- [ 3.479157] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 3.479257] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 3.479415] tegra_throttle_probe: probe successful. #cdevs=4
- [ 3.480173] FAN dev name: pwm-fan
- [ 3.480258] FAN:gpio request success.
- [ 3.480336] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
- [ 3.480642] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
- [ 3.480837] pwm_fan_driver pwm-fan: fan tach request irq success
- [ 3.480845] pwm_fan_driver pwm-fan: tach period: 1000
- [ 3.480944] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
- [ 3.480948] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
- [ 3.480952] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
- [ 3.480955] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
- [ 3.480959] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
- [ 3.480962] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
- [ 3.480965] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
- [ 3.480969] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
- [ 3.480972] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
- [ 3.480975] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
- [ 3.481944] softdog-platform soft_watchdog: Software Watchdog Timer: initialized
- [ 3.482608] device-mapper: uevent: version 1.0.3
- [ 3.483139] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
- [ 3.488493] tegra210-cpufreq cpufreq: probe()...completed
- [ 3.489301] sdhci: Secure Digital Host Controller Interface driver
- [ 3.489302] sdhci: Copyright(c) Pierre Ossman
- [ 3.489304] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.489796] sdhci-tegra sdhci-tegra.0: Got CD GPIO
- [ 3.490157] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
- [ 3.490280] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
- [ 3.494227] tegra-se 70012000.se: tegra_se_probe: complete
- [ 3.494745] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.495888] usbcore: registered new interface driver usbhid
- [ 3.495889] usbhid: USB HID core driver
- [ 3.498113] tegra21x_actmon 6000c800.actmon: in actmon_register()...
- [ 3.498282] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
- [ 3.500007] nvpmodel: initialized successfully
- [ 3.501009] usbcore: registered new interface driver snd-usb-audio
- [ 3.501069] No Device Node present for smmu client: snd-soc-dummy !!
- [ 3.501073] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
- [ 3.501090] iommu: Adding device snd-soc-dummy to group 36
- [ 3.510710] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
- [ 3.534632] OPE platform probe
- [ 3.534718] OPE platform probe successful
- [ 3.535098] OPE platform probe
- [ 3.535184] OPE platform probe successful
- [ 3.536333] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
- [ 3.560267] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
- [ 3.560408] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
- [ 3.560534] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
- [ 3.560657] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
- [ 3.560781] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
- [ 3.560904] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
- [ 3.561028] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
- [ 3.561153] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
- [ 3.561274] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
- [ 3.561399] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
- [ 3.574163] u32 classifier
- [ 3.574164] Actions configured
- [ 3.574234] Initializing XFRM netlink socket
- [ 3.574963] NET: Registered protocol family 10
- [ 3.575705] NET: Registered protocol family 17
- [ 3.575715] NET: Registered protocol family 15
- [ 3.575790] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 3.575835] Bluetooth: RFCOMM socket layer initialized
- [ 3.575844] Bluetooth: RFCOMM ver 1.11
- [ 3.575848] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 3.575852] Bluetooth: HIDP socket layer initialized
- [ 3.575870] 9pnet: Installing 9P2000 support
- [ 3.575906] Key type dns_resolver registered
- [ 3.576435] Registered cp15_barrier emulation handler
- [ 3.576444] Registered setend emulation handler
- [ 3.577546] registered taskstats version 1
- [ 3.578136] Adding domain ve2-pd to PM domain host1x-pd
- [ 3.578381] Adding domain ve-pd to PM domain host1x-pd
- [ 3.856775] mmc0: hw tuning done ...
- [ 3.856814] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
- [ 3.857268] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
- [ 3.862951] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
- [ 4.396011] tegradc tegradc.0: fb registered
- [ 4.406715] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
- [ 4.413958] tegradc tegradc.0: hdmi: tmds rate:25174K prod-setting:prod_c_hdmi_0m_54m
- [ 4.422112] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL.
- [ 4.429254] tegradc tegradc.0: hdmi: BL set VIC 0
- [ 4.433956] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL.
- [ 4.441265] extcon-disp-state extcon:disp-state: cable 47 state 1
- [ 4.447363] Extcon AUX1(HDMI) enable
- [ 4.451356] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
- [ 4.457755] tegradc tegradc.1: No lt-data, using default setting
- [ 4.463776] tegradc tegradc.1: No hpd-gpio in DT
- [ 4.466835] edid invalid
- [ 4.470935] tegradc tegradc.1: DT parsed successfully
- [ 4.476005] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1
- [ 4.484479] tegradc tegradc.1: dpd enable lookup fail:-19
- [ 4.492989] tegradc tegradc.0: nominal-pclk:25174825 parent:25173906 div:1.0 pclk:25173906 24923052~27440532
- [ 4.493826] tegradc tegradc.1: probed
- [ 4.508298] tegradc tegradc.1: fb registered
- [ 4.515707] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
- [ 4.517408] isp 54600000.isp: initialized
- [ 4.518162] isp 54680000.isp: initialized
- [ 4.530014] clk_cbus_recalc_rate: no gbus parent
- [ 4.530018] clk_cbus_round_rate: no gbus parent
- [ 4.530020] clk_cbus_round_rate: no gbus parent
- [ 4.530026] clk_cbus_recalc_rate: no gbus parent
- [ 4.530129] clk_cbus_recalc_rate: no gbus parent
- [ 4.530132] clk_cbus_round_rate: no gbus parent
- [ 4.530133] clk_cbus_round_rate: no gbus parent
- [ 4.530136] clk_cbus_recalc_rate: no gbus parent
- [ 4.530149] tegra_dvfs: GPU-cap: registered
- [ 4.530208] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
- [ 4.530209] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
- [ 4.530211] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled
- [ 4.532312] tegra_dvfs: vdd-gpu-vts: registered
- [ 4.533314] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
- [ 4.533956] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
- [ 4.535988] input: gpio-keys as /devices/gpio-keys/input/input1
- [ 4.581165] tegra_rtc 7000e000.rtc: setting system clock to 2019-07-08 20:58:08 UTC (1562619488)
- [ 4.582112] vi 54080000.vi: vi_probe: ++
- [ 4.586587] vi 54080000.vi: initialized
- [ 4.589177] vi 54080000.vi: subdev nvcsi--1 bound
- [ 4.589193] vi 54080000.vi: subdev imx274 6-001a bound
- [ 4.590008] mmcblk mmc0:aaaa: Card claimed for testing.
- [ 4.591213] Disable partitions left on by BL
- [ 4.591215] disb
- [ 4.591258] bwmgr: missing cdev-type property
- [ 4.591379] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
- [ 4.591385] DRAM derating cdev registered.
- [ 4.592408] vdd-1v8: disabling
- [ 4.592411] vdd-fan: disabling
- [ 4.592412] vdd-usb-vbus: disabling
- [ 4.592414] vdd-usb-vbus2: disabling
- [ 4.592423] avdd-io-edp-1v05: disabling
- [ 4.592424] vdd-usb-hub-en: disabling
- [ 4.592588] ALSA device list:
- [ 4.592591] #0: tegra-hda at 0x70038000 irq 83
- [ 4.592592] #1: tegra-snd-t210ref-mobile-rt565x
- [ 4.715660] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
- [ 4.718913] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
- [ 4.729062] tegradc tegradc.1: blank - powerdown
- [ 4.733695] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
- [ 4.733697] Extcon DP: HPD disabled
- [ 4.733702] hpd: hpd_switch 0
- [ 4.733704] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
- [ 4.733711] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
- [ 4.733716] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
- [ 4.745019] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0
- [ 4.745287] snd_hda_codec_hdmi hdaudioC0D3: HDMI: Unknown ELD version 0
- [ 4.780964] tegradc tegradc.0: blank - powerdown
- [ 4.799316] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 4.799332] VFS: Mounted root (ext4 filesystem) on device 179:1.
- [ 4.802684] devtmpfs: mounted
- [ 4.805691] Freeing unused kernel memory: 8512K
- [ 4.817296] extcon-disp-state extcon:disp-state: cable 47 state 0
- [ 4.817297] Extcon AUX1(HDMI) disable
- [ 4.840681] tegradc tegradc.0: unblank
- [ 4.878993] tegradc tegradc.0: nominal-pclk:32000000 parent:32000000 div:1.0 pclk:32000000 31680000~34880000
- [ 4.879049] tegradc tegradc.0: hdmi: tmds rate:32000K prod-setting:prod_c_hdmi_0m_54m
- [ 4.883495] tegradc tegradc.0: sync windows ret = 250
- [ 4.959263] extcon-disp-state extcon:disp-state: cable 40 state 1
- [ 4.966348] Extcon HDMI: HPD enabled
- [ 4.970915] tegradc tegradc.0: hdmi: plugged
- [ 5.056796] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.077414] cgroup: cgroup2: unknown option "nsdelegate"
- [ 5.102610] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
- [ 5.127800] systemd[1]: Detected architecture arm64.
- [ 5.161427] systemd[1]: Set hostname to <maza-nano>.
- [ 5.262430] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 5.281621] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 5.436393] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.446271] systemd[1]: Created slice System Slice.
- [ 5.453580] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.461386] systemd[1]: Listening on Syslog Socket.
- [ 5.468391] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.476157] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 5.486096] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 5.495402] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 5.621344] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
- [ 5.720553] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
- [ 5.972621] systemd-journald[1967]: Received request to flush runtime journal from PID 1
- [ 6.925511] random: crng init done
- [ 6.929609] random: 7 urandom warning(s) missed due to ratelimiting
- [ 7.368081] using random self ethernet address
- [ 7.376262] using random host ethernet address
- [ 7.407942] Mass Storage Function, version: 2009/09/11
- [ 7.407948] LUN: removable file: (no medium)
- [ 7.418958] using random self ethernet address
- [ 7.424791] using random host ethernet address
- [ 7.441981] rndis0: HOST MAC 1a:06:69:2e:34:9c
- [ 7.442048] rndis0: MAC 1a:06:69:2e:34:9d
- [ 7.446538] usb0: HOST MAC 1a:06:69:2e:34:9e
- [ 7.446574] usb0: MAC 1a:06:69:2e:34:9f
- [ 7.446597] tegra-xudc-new 700d0000.xudc: exiting ELPG
- [ 7.448089] tegra-xudc-new 700d0000.xudc: exiting ELPG done
- [ 7.448110] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
- [ 7.448141] tegra-xudc-new 700d0000.xudc: entering ELPG
- [ 7.448504] tegra-xudc-new 700d0000.xudc: entering ELPG done
- [ 7.448541] tegra-xudc-new 700d0000.xudc: exiting ELPG
- [ 7.449662] tegra-xudc-new 700d0000.xudc: exiting ELPG done
- [ 7.449686] tegra-xudc-new 700d0000.xudc: entering ELPG
- [ 7.449934] tegra-xudc-new 700d0000.xudc: entering ELPG done
- [ 7.476642] l4tbr0: port 1(rndis0) entered blocking state
- [ 7.476646] l4tbr0: port 1(rndis0) entered disabled state
- [ 7.477087] tegra-xusb 70090000.xusb: cannot find firmware....retry after 1 second
- [ 7.477735] device rndis0 entered promiscuous mode
- [ 7.483932] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
- [ 7.496697] l4tbr0: port 2(usb0) entered blocking state
- [ 7.496701] l4tbr0: port 2(usb0) entered disabled state
- [ 7.498350] device usb0 entered promiscuous mode
- [ 7.515257] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
- [ 7.515266] l4tbr0: port 2(usb0) entered blocking state
- [ 7.515269] l4tbr0: port 2(usb0) entered forwarding state
- [ 7.700432] nvs_dsm nvs_dsm: dsm_probe
- [ 7.700457] nvs_dsm nvs_dsm: dsm_remove
- [ 7.700460] nvs_dsm nvs_dsm: dsm_probe done
- [ 8.361254] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 8.363082] eth0: 0xffffff800a2fe000, 00:04:4b:e4:18:63, IRQ 404
- [ 8.417964] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 8.471237] l4tbr0: port 2(usb0) entered disabled state
- [ 8.510509] tegra-xusb 70090000.xusb: Firmware timestamp: 2017-11-03 13:36:19 UTC, Version: 50.20 release
- [ 8.510553] tegra-xusb 70090000.xusb: xHCI Host Controller
- [ 8.510572] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 1
- [ 8.511435] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100 quirks 0x00050010
- [ 8.511467] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
- [ 8.511594] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 8.511599] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 8.511602] usb usb1: Product: xHCI Host Controller
- [ 8.511605] usb usb1: Manufacturer: Linux 4.9.140-tegra xhci-hcd
- [ 8.511608] usb usb1: SerialNumber: 70090000.xusb
- [ 8.512008] hub 1-0:1.0: USB hub found
- [ 8.512077] hub 1-0:1.0: 5 ports detected
- [ 8.512582] tegra-xusb 70090000.xusb: xHCI Host Controller
- [ 8.512593] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus number 2
- [ 8.512665] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 8.512738] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 8.512742] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 8.512745] usb usb2: Product: xHCI Host Controller
- [ 8.512748] usb usb2: Manufacturer: Linux 4.9.140-tegra xhci-hcd
- [ 8.512751] usb usb2: SerialNumber: 70090000.xusb
- [ 8.513153] hub 2-0:1.0: USB hub found
- [ 8.513222] hub 2-0:1.0: 4 ports detected
- [ 8.616497] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 1
- [ 8.616747] usb usb2: usb_suspend_both: status 0
- [ 8.840242] usb 1-2: new high-speed USB device number 2 using tegra-xusb
- [ 8.879736] usb 1-2: New USB device found, idVendor=0bda, idProduct=5411
- [ 8.879743] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 8.879747] usb 1-2: Product: 4-Port USB 2.1 Hub
- [ 8.879750] usb 1-2: Manufacturer: Generic
- [ 8.881069] hub 1-2:1.0: USB hub found
- [ 8.883204] hub 1-2:1.0: 4 ports detected
- [ 8.985291] usb 2-1: new SuperSpeed USB device number 2 using tegra-xusb
- [ 9.008255] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 1
- [ 9.020108] usb 2-1: New USB device found, idVendor=0bda, idProduct=0411
- [ 9.020114] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 9.020119] usb 2-1: Product: 4-Port USB 3.1 Hub
- [ 9.020122] usb 2-1: Manufacturer: Generic
- [ 9.026617] hub 2-1:1.0: USB hub found
- [ 9.028034] hub 2-1:1.0: 4 ports detected
- [ 9.028248] usb 1-2: usb_suspend_both: status 0
- [ 9.028378] usb usb1: usb_suspend_both: status 0
- [ 9.188240] usb 2-1: usb_suspend_both: status 0
- [ 9.188420] usb usb2: usb_suspend_both: status 0
- [ 10.103195] tegradc tegradc.0: blank - powerdown
- [ 10.163364] extcon-disp-state extcon:disp-state: cable 47 state 0 already set.
- [ 10.163366] Extcon AUX1(HDMI) disable
- [ 10.182368] tegradc tegradc.0: unblank
- [ 10.194727] tegradc tegradc.0: nominal-pclk:32000000 parent:32000000 div:1.0 pclk:32000000 31680000~34880000
- [ 10.194805] tegradc tegradc.0: hdmi: tmds rate:32000K prod-setting:prod_c_hdmi_0m_54m
- [ 10.200138] tegradc tegradc.0: unblank
- [ 10.200145] tegradc tegradc.1: blank - powerdown
- [ 10.996345] tegra-xusb 70090000.xusb: entering ELPG
- [ 10.997759] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 3
- [ 10.997964] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 0
- [ 10.999610] tegra-xusb 70090000.xusb: entering ELPG done
- [ 12.511789] r8168: eth0: link up
- [ 12.512118] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 254.070157] vi 54080000.vi: ================= START STATUS =================
- [ 254.070173] vi 54080000.vi: ================== END STATUS ==================
- [ 254.084066] imx274 6-001a: imx274_set_exposure_shr_dol_short: error, invalid dol mode
- [ 254.092172] imx274 6-001a: imx274_set_exposure_shr_dol_short: EXPOSURE short control is not set
- [ 254.103093] imx274 6-001a: ctrl Exposure Short range update failed
- [ 254.109307] imx274 6-001a: Error updating control ranges -22
- [ 327.066941] tegradc tegradc.0: blank - powerdown
- [ 327.124751] extcon-disp-state extcon:disp-state: cable 47 state 0 already set.
- [ 327.124754] Extcon AUX1(HDMI) disable
- [ 856.312488] vi 54080000.vi: ================= START STATUS =================
- [ 856.312500] vi 54080000.vi: ================== END STATUS ==================
- [ 856.322411] imx274 6-001a: imx274_set_exposure_shr_dol_short: error, invalid dol mode
- [ 856.330310] imx274 6-001a: imx274_set_exposure_shr_dol_short: EXPOSURE short control is not set
- [ 856.339750] imx274 6-001a: ctrl Exposure Short range update failed
- [ 856.345974] imx274 6-001a: Error updating control ranges -22
Advertisement
Add Comment
Please, Sign In to add comment