Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@proxmox1:/# dmesg
- Initializing cgroup subsys cpuset
- Initializing cgroup subsys cpu
- Linux version 2.6.32-19-pve (root@maui) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Tue Apr 2 12:22:11 CEST 2013
- Command line: BOOT_IMAGE=/vmlinuz-2.6.32-19-pve root=/dev/mapper/pve-root ro quiet
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- Centaur CentaurHauls
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000cfe80000 (usable)
- BIOS-e820: 00000000cfe80000 - 00000000cfe98000 (ACPI data)
- BIOS-e820: 00000000cfe98000 - 00000000cfec0000 (ACPI NVS)
- BIOS-e820: 00000000cfec0000 - 00000000cff00000 (reserved)
- BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 0000000420000000 (usable)
- DMI present.
- SMBIOS version 2.5 @ 0xFBF40
- DMI: System manufacturer System Product Name/M5A78L-M/USB3, BIOS 1401 08/28/2012
- AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
- e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- last_pfn = 0x420000 max_arch_pfn = 0x400000000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-EFFFF uncachable
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000000 mask FFFF80000000 write-back
- 1 base 000080000000 mask FFFFC0000000 write-back
- 2 base 0000C0000000 mask FFFFF0000000 write-back
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- TOM2: 0000000430000000 aka 17152M
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- last_pfn = 0xcfe80 max_arch_pfn = 0x400000000
- initial memory mapped : 0 - 20000000
- Using GB pages for direct mapping
- init_memory_mapping: 0000000000000000-00000000cfe80000
- 0000000000 - 00c0000000 page 1G
- 00c0000000 - 00cfe00000 page 2M
- 00cfe00000 - 00cfe80000 page 4k
- kernel direct mapping tables up to cfe80000 @ 10000-13000
- init_memory_mapping: 0000000100000000-0000000420000000
- 0100000000 - 0400000000 page 1G
- 0400000000 - 0420000000 page 2M
- kernel direct mapping tables up to 420000000 @ 12000-14000
- RAMDISK: 37097000 - 37fef070
- ACPI: RSDP 00000000000fb490 00024 (v02 ACPIAM)
- ACPI: XSDT 00000000cfe80100 00054 (v01 082812 XSDT1406 20120828 MSFT 00000097)
- ACPI: FACP 00000000cfe80290 000F4 (v03 082812 FACP1406 20120828 MSFT 00000097)
- ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 (20090903/tbfadt-557)
- ACPI: DSDT 00000000cfe80460 0D99C (v01 A1887 A1887001 00000001 INTL 20060113)
- ACPI: FACS 00000000cfe98000 00040
- ACPI: APIC 00000000cfe80390 0008C (v01 082812 APIC1406 20120828 MSFT 00000097)
- ACPI: MCFG 00000000cfe80420 0003C (v01 082812 OEMMCFG 20120828 MSFT 00000097)
- ACPI: OEMB 00000000cfe98040 00072 (v01 082812 OEMB1406 20120828 MSFT 00000097)
- ACPI: HPET 00000000cfe8f460 00038 (v01 082812 OEMHPET 20120828 MSFT 00000097)
- ACPI: SSDT 00000000cfe8f4a0 008BC (v01 A M I POWERNOW 00000001 AMD 00000001)
- ACPI: Local APIC address 0xfee00000
- Scanning NUMA topology in Northbridge 24
- No NUMA configuration found
- Faking a node at 0000000000000000-0000000420000000
- Bootmem setup node 0 0000000000000000-0000000420000000
- NODE_DATA [0000000000013000 - 0000000000053fff]
- bootmap [0000000000100000 - 0000000000183fff] pages 84
- (8 early reservations) ==> bootmem [0000000000 - 0420000000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- #2 [0001000000 - 000242f904] TEXT DATA BSS ==> [0001000000 - 000242f904]
- #3 [0037097000 - 0037fef070] RAMDISK ==> [0037097000 - 0037fef070]
- #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- #5 [0002430000 - 0002430348] BRK ==> [0002430000 - 0002430348]
- #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- #7 [0000012000 - 0000013000] PGTABLE ==> [0000012000 - 0000013000]
- found SMP MP-table at [ffff8800000ff780] ff780
- [ffffea0000000000-ffffea000f5fffff] PMD -> [ffff880028600000-ffff880036ffffff] on node 0
- [ffffea000f600000-ffffea00107fffff] PMD -> [ffff880038000000-ffff8800391fffff] on node 0
- Zone PFN ranges:
- DMA 0x00000010 -> 0x00001000
- DMA32 0x00001000 -> 0x00100000
- Normal 0x00100000 -> 0x00420000
- Movable zone start PFN for each node
- early_node_map[3] active PFN ranges
- 0: 0x00000010 -> 0x0000009f
- 0: 0x00000100 -> 0x000cfe80
- 0: 0x00100000 -> 0x00420000
- On node 0 totalpages: 4128271
- DMA zone: 64 pages used for memmap
- DMA zone: 103 pages reserved
- DMA zone: 3816 pages, LIFO batch:0
- DMA32 zone: 16320 pages used for memmap
- DMA32 zone: 831168 pages, LIFO batch:31
- Normal zone: 51200 pages used for memmap
- Normal zone: 3225600 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
- ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
- ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0x8300 base: 0xfed00000
- SMP: Allowing 8 CPUs, 4 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- PM: Registered nosave memory: 00000000cfe80000 - 00000000cfe98000
- PM: Registered nosave memory: 00000000cfe98000 - 00000000cfec0000
- PM: Registered nosave memory: 00000000cfec0000 - 00000000cff00000
- PM: Registered nosave memory: 00000000cff00000 - 00000000ffe00000
- PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
- Allocating PCI resources starting at cff00000 (gap: cff00000:2ff00000)
- Booting paravirtualized kernel on bare hardware
- NR_CPUS:4096 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- PERCPU: Embedded 39 pages/cpu @ffff880028200000 s128280 r8192 d23272 u262144
- pcpu-alloc: s128280 r8192 d23272 u262144 alloc=1*2097152
- pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4060584
- Policy zone: Normal
- Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-19-pve root=/dev/mapper/pve-root ro quiet
- PID hash table entries: 4096 (order: 3, 32768 bytes)
- Checking aperture...
- No AGP bridge found
- Node 0: aperture @ 0 size 32 MB
- Your BIOS doesn't leave a aperture memory hole
- Please enable the IOMMU option in the BIOS setup
- This costs you 64 MB of RAM
- Mapping aperture over 65536 KB of RAM @ 20000000
- PM: Registered nosave memory: 0000000020000000 - 0000000024000000
- AMD-Vi disabled by default: pass amd_iommu=on to enable
- PRAM: banned regions:
- 0: [00000000 - 00002430] 9265 pages
- 1: [00020000 - 00028404] 33797 pages
- 2: [00028600 - 00036fff] 59904 pages
- 3: [00037097 - 00037fef] 3929 pages
- 4: [00038000 - 000391ff] 4608 pages
- Total banned: 111503 pages in 5 regions
- Memory: 16151204k/17301504k available (5282k kernel code, 788420k absent, 361880k reserved, 7055k data, 1324k init)
- Hierarchical RCU implementation.
- NR_IRQS:33024 nr_irqs:472
- Extended CMOS year: 2000
- spurious 8259A interrupt: IRQ7.
- Console: colour VGA+ 80x25
- console [tty0] enabled
- hpet clockevent registered
- Fast TSC calibration using PIT
- Detected 3013.715 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6027.43 BogoMIPS (lpj=3013715)
- pid_max: default: 1048576 minimum: 301
- Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
- Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Mount-cache hash table entries: 256
- Dcache time values: 1001 -> 9 , 4294667306
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys devices
- Initializing cgroup subsys freezer
- Initializing cgroup subsys net_cls
- Initializing cgroup subsys blkio
- Initializing cgroup subsys perf_event
- Initializing cgroup subsys net_prio
- tseg: 0000000000
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 6 MCE banks
- ACPI: Core revision 20090903
- ftrace: converting mcount calls to 0f 1f 44 00 00
- ftrace: allocating 21456 entries in 85 pages
- Setting APIC routing to flat
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
- Performance Events: AMD PMU driver.
- ... version: 0
- ... bit width: 48
- ... generic registers: 4
- ... value mask: 0000ffffffffffff
- ... max period: 00007fffffffffff
- ... fixed-purpose events: 0
- ... event mask: 000000000000000f
- NMI watchdog enabled, takes one hw-pmu counter.
- Booting Node 0, Processors #1 #2 #3
- Brought up 4 CPUs
- Total of 4 processors activated (24109.72 BogoMIPS).
- sizeof(vma)=200 bytes
- sizeof(page)=64 bytes
- sizeof(inode)=664 bytes
- sizeof(dentry)=224 bytes
- sizeof(ext3inode)=872 bytes
- sizeof(buffer_head)=104 bytes
- sizeof(skbuff)=264 bytes
- sizeof(task_struct)=2784 bytes
- devtmpfs: initialized
- PM: Registering ACPI NVS region at cfe98000 (163840 bytes)
- regulator: core version 0.5
- NET: Registered protocol family 16
- node 0 link 0: io port [1000, ffffff]
- TOM: 00000000d0000000 aka 3328M
- Fam 10h mmconf [e0000000, efffffff]
- node 0 link 0: mmio [a0000, bffff]
- node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
- node 0 link 0: mmio [f0000000, fd5fffff]
- node 0 link 0: mmio [fd600000, fd7fffff]
- node 0 link 0: mmio [fd800000, ffdfffff]
- TOM2: 0000000430000000 aka 17152M
- bus: [00,1f] on node 0 link 0
- bus: 00 index 0 io port: [0, ffff]
- bus: 00 index 1 mmio: [a0000, bffff]
- bus: 00 index 2 mmio: [d0000000, dfffffff]
- bus: 00 index 3 mmio: [f0000000, ffffffff]
- bus: 00 index 4 mmio: [430000000, fcffffffff]
- ACPI: bus type pci registered
- PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- PCI: Not using MMCONFIG.
- PCI: Using configuration type 1 for base access
- PCI: Using configuration type 1 for extended access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND
- ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff823ed110), AE_NOT_FOUND
- ACPI Error (dswload-0781): [PRID] Namespace lookup failure, AE_ALREADY_EXISTS
- ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20090903/psloop-230)
- ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff823ed110), AE_ALREADY_EXISTS
- ACPI: Marking method \___ as Serialized because of AE_ALREADY_EXISTS error
- ACPI: Executed 3 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S1 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- PCI: Using MMCONFIG at e0000000 - efffffff
- ACPI Warning: Incorrect checksum in table [OEMB] - C4, should be BF (20090903/tbutils-314)
- ACPI: No dock devices found.
- HEST: Table not found.
- PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
- pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xdfffffff]
- pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
- pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:02.0: PME# disabled
- pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:07.0: PME# disabled
- pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:0a.0: PME# disabled
- pci 0000:00:11.0: reg 10: [io 0xb000-0xb007]
- pci 0000:00:11.0: reg 14: [io 0xa000-0xa003]
- pci 0000:00:11.0: reg 18: [io 0x9000-0x9007]
- pci 0000:00:11.0: reg 1c: [io 0x8000-0x8003]
- pci 0000:00:11.0: reg 20: [io 0x7000-0x700f]
- pci 0000:00:11.0: reg 24: [mem 0xfd5ffc00-0xfd5fffff]
- pci 0000:00:11.0: set SATA to AHCI mode
- pci 0000:00:12.0: reg 10: [mem 0xfd5fe000-0xfd5fefff]
- pci 0000:00:12.1: reg 10: [mem 0xfd5fd000-0xfd5fdfff]
- pci 0000:00:12.2: reg 10: [mem 0xfd5ff800-0xfd5ff8ff]
- pci 0000:00:12.2: supports D1 D2
- pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:12.2: PME# disabled
- pci 0000:00:13.0: reg 10: [mem 0xfd5fc000-0xfd5fcfff]
- pci 0000:00:13.1: reg 10: [mem 0xfd5fb000-0xfd5fbfff]
- pci 0000:00:13.2: reg 10: [mem 0xfd5ff400-0xfd5ff4ff]
- pci 0000:00:13.2: supports D1 D2
- pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- pci 0000:00:13.2: PME# disabled
- pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
- pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
- pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
- pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
- pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
- pci 0000:00:14.2: reg 10: [mem 0xfd5f4000-0xfd5f7fff 64bit]
- pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- pci 0000:00:14.2: PME# disabled
- pci 0000:00:14.5: reg 10: [mem 0xfd5fa000-0xfd5fafff]
- pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
- pci 0000:01:05.0: reg 14: [io 0xc000-0xc0ff]
- pci 0000:01:05.0: reg 18: [mem 0xfd7f0000-0xfd7fffff]
- pci 0000:01:05.0: reg 24: [mem 0xfd600000-0xfd6fffff]
- pci 0000:01:05.0: supports D1 D2
- pci 0000:01:05.1: reg 10: [mem 0xfd7e8000-0xfd7ebfff]
- pci 0000:01:05.1: supports D1 D2
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xfd600000-0xfd7fffff]
- pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:02:00.0: reg 10: [mem 0xfeae0000-0xfeafffff]
- pci 0000:02:00.0: reg 14: [mem 0xfe400000-0xfe7fffff]
- pci 0000:02:00.0: reg 18: [io 0xdc00-0xdc1f]
- pci 0000:02:00.0: reg 1c: [mem 0xfeadc000-0xfeadffff]
- pci 0000:02:00.0: reg 30: [mem 0xfe000000-0xfe3fffff pref]
- pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 10: [mem 0xfeaa0000-0xfeabffff]
- pci 0000:02:00.1: reg 14: [mem 0xfdc00000-0xfdffffff]
- pci 0000:02:00.1: reg 18: [io 0xd880-0xd89f]
- pci 0000:02:00.1: reg 1c: [mem 0xfead8000-0xfeadbfff]
- pci 0000:02:00.1: reg 30: [mem 0xfd800000-0xfdbfffff pref]
- pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
- pci 0000:02:00.1: PME# disabled
- pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:00:02.0: PCI bridge to [bus 02-02]
- pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfeafffff]
- pci 0000:00:02.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:03:00.0: reg 10: [mem 0xfebf0000-0xfebf7fff 64bit]
- pci 0000:03:00.0: PME# supported from D3hot D3cold
- pci 0000:03:00.0: PME# disabled
- pci 0000:00:07.0: PCI bridge to [bus 03-03]
- pci 0000:00:07.0: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
- pci 0000:00:07.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:04:00.0: reg 10: [io 0xe800-0xe8ff]
- pci 0000:04:00.0: reg 18: [mem 0xfcfff000-0xfcffffff 64bit pref]
- pci 0000:04:00.0: reg 20: [mem 0xfcff8000-0xfcffbfff 64bit pref]
- pci 0000:04:00.0: supports D1 D2
- pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:04:00.0: PME# disabled
- pci 0000:00:0a.0: PCI bridge to [bus 04-04]
- pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:0a.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
- pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode)
- pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
- pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
- pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
- pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
- pci0000:00: Requesting ACPI _OSC control (0x1d)
- Unable to assume _OSC PCIe control. Disabling ASPM
- ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:05.0
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- PCI: Using ACPI for IRQ routing
- PCI: pci_cache_line_size set to 64 bytes
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- Switching to clocksource hpet
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp 00:00: [io 0x0cf8-0x0cff]
- pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:02: [dma 4]
- pnp 00:02: [io 0x0000-0x000f]
- pnp 00:02: [io 0x0081-0x0083]
- pnp 00:02: [io 0x0087]
- pnp 00:02: [io 0x0089-0x008b]
- pnp 00:02: [io 0x008f]
- pnp 00:02: [io 0x00c0-0x00df]
- pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- pnp 00:03: [io 0x0070-0x0071]
- pnp 00:03: [irq 8]
- pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- pnp 00:04: [io 0x0061]
- pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- pnp 00:05: [io 0x00f0-0x00ff]
- pnp 00:05: [irq 13]
- pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- pnp 00:06: [io 0x0378-0x037f]
- pnp 00:06: [irq 7]
- pnp 00:06: [dma 0 disabled]
- pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
- pnp 00:07: [mem 0xfed00000-0xfed003ff]
- pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
- pnp 00:08: [io 0x03f8-0x03ff]
- pnp 00:08: [irq 4]
- pnp 00:08: [dma 0 disabled]
- pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
- pnp 00:09: [io 0x0060]
- pnp 00:09: [io 0x0064]
- pnp 00:09: [mem 0xfec00000-0xfec00fff]
- pnp 00:09: [mem 0xfee00000-0xfee00fff]
- pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0a: [io 0x0010-0x001f]
- pnp 00:0a: [io 0x0022-0x003f]
- pnp 00:0a: [io 0x0062-0x0063]
- pnp 00:0a: [io 0x0065-0x006f]
- pnp 00:0a: [io 0x0072-0x007f]
- pnp 00:0a: [io 0x0080]
- pnp 00:0a: [io 0x0084-0x0086]
- pnp 00:0a: [io 0x0088]
- pnp 00:0a: [io 0x008c-0x008e]
- pnp 00:0a: [io 0x0090-0x009f]
- pnp 00:0a: [io 0x00a2-0x00bf]
- pnp 00:0a: [io 0x00b1]
- pnp 00:0a: [io 0x00e0-0x00ef]
- pnp 00:0a: [io 0x04d0-0x04d1]
- pnp 00:0a: [io 0x040b]
- pnp 00:0a: [io 0x04d6]
- pnp 00:0a: [io 0x0c00-0x0c01]
- pnp 00:0a: [io 0x0c14]
- pnp 00:0a: [io 0x0c50-0x0c51]
- pnp 00:0a: [io 0x0c52]
- pnp 00:0a: [io 0x0c6c]
- pnp 00:0a: [io 0x0c6f]
- pnp 00:0a: [io 0x0cd0-0x0cd1]
- pnp 00:0a: [io 0x0cd2-0x0cd3]
- pnp 00:0a: [io 0x0cd4-0x0cd5]
- pnp 00:0a: [io 0x0cd6-0x0cd7]
- pnp 00:0a: [io 0x0cd8-0x0cdf]
- pnp 00:0a: [io 0x0b00-0x0b3f]
- pnp 00:0a: [io 0x0800-0x089f]
- pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
- pnp 00:0a: [io 0x0b00-0x0b0f]
- pnp 00:0a: [io 0x0b20-0x0b3f]
- pnp 00:0a: [io 0x0900-0x090f]
- pnp 00:0a: [io 0x0910-0x091f]
- pnp 00:0a: [io 0xfe00-0xfefe]
- pnp 00:0a: [io 0x0060]
- pnp 00:0a: [io 0x0064]
- pnp 00:0a: [mem 0xcff00000-0xcfffffff]
- pnp 00:0a: [mem 0xffb80000-0xffbfffff]
- pnp 00:0a: [mem 0xfec10000-0xfec1001f]
- pnp 00:0a: [mem 0xfed40000-0xfed44fff]
- pnp 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
- pnp 00:0b: [io 0x0230-0x023f]
- pnp 00:0b: [io 0x0290-0x029f]
- pnp 00:0b: [io 0x0300-0x030f]
- pnp 00:0b: [io 0x0a30-0x0a3f]
- pnp 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0c: [mem 0xe0000000-0xefffffff]
- pnp 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
- pnp 00:0d: [mem 0x00000000-0x0009ffff]
- pnp 00:0d: [mem 0x000c0000-0x000cffff]
- pnp 00:0d: [mem 0x000e0000-0x000fffff]
- pnp 00:0d: [mem 0x00100000-0xcfefffff]
- pnp 00:0d: [mem 0xfec00000-0xffffffff]
- pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
- pnp: PnP ACPI: found 14 devices
- ACPI: ACPI bus type pnp unregistered
- system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
- system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
- system 00:0a: [io 0x04d0-0x04d1] has been reserved
- system 00:0a: [io 0x040b] has been reserved
- system 00:0a: [io 0x04d6] has been reserved
- system 00:0a: [io 0x0c00-0x0c01] has been reserved
- system 00:0a: [io 0x0c14] has been reserved
- system 00:0a: [io 0x0c50-0x0c51] has been reserved
- system 00:0a: [io 0x0c52] has been reserved
- system 00:0a: [io 0x0c6c] has been reserved
- system 00:0a: [io 0x0c6f] has been reserved
- system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
- system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
- system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
- system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
- system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
- system 00:0a: [io 0x0b00-0x0b3f] has been reserved
- system 00:0a: [io 0x0800-0x089f] has been reserved
- system 00:0a: [io 0x0b00-0x0b0f] has been reserved
- system 00:0a: [io 0x0b20-0x0b3f] has been reserved
- system 00:0a: [io 0x0900-0x090f] has been reserved
- system 00:0a: [io 0x0910-0x091f] has been reserved
- system 00:0a: [io 0xfe00-0xfefe] has been reserved
- system 00:0a: [mem 0xcff00000-0xcfffffff] has been reserved
- system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
- system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved
- system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
- system 00:0b: [io 0x0230-0x023f] has been reserved
- system 00:0b: [io 0x0290-0x029f] has been reserved
- system 00:0b: [io 0x0300-0x030f] has been reserved
- system 00:0b: [io 0x0a30-0x0a3f] has been reserved
- system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
- system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
- system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
- system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
- system 00:0d: [mem 0x00100000-0xcfefffff] could not be reserved
- system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
- PCI: max bus depth: 1 pci_try_num: 2
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: PCI bridge to [bus 01-01]
- pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- pci 0000:00:01.0: bridge window [mem 0xfd600000-0xfd7fffff]
- pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: BAR 7: assigned [mem 0xfe800000-0xfe81ffff 64bit]
- pci 0000:02:00.0: BAR 7: set to [mem 0xfe800000-0xfe81ffff 64bit] (PCI address [0xfe800000-0xfe81ffff]
- pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.0: BAR 10: assigned [mem 0xfe820000-0xfe83ffff 64bit]
- pci 0000:02:00.0: BAR 10: set to [mem 0xfe820000-0xfe83ffff 64bit] (PCI address [0xfe820000-0xfe83ffff]
- pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: BAR 7: assigned [mem 0xfe840000-0xfe85ffff 64bit]
- pci 0000:02:00.1: BAR 7: set to [mem 0xfe840000-0xfe85ffff 64bit] (PCI address [0xfe840000-0xfe85ffff]
- pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit]
- pci 0000:02:00.1: BAR 10: assigned [mem 0xfe860000-0xfe87ffff 64bit]
- pci 0000:02:00.1: BAR 10: set to [mem 0xfe860000-0xfe87ffff 64bit] (PCI address [0xfe860000-0xfe87ffff]
- pci 0000:00:02.0: PCI bridge to [bus 02-02]
- pci 0000:00:02.0: PCI bridge to [bus 02-02]
- pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
- pci 0000:00:02.0: bridge window [mem 0xfd800000-0xfeafffff]
- pci 0000:00:02.0: bridge window [mem pref disabled]
- pci 0000:00:07.0: PCI bridge to [bus 03-03]
- pci 0000:00:07.0: PCI bridge to [bus 03-03]
- pci 0000:00:07.0: bridge window [io disabled]
- pci 0000:00:07.0: bridge window [mem 0xfeb00000-0xfebfffff]
- pci 0000:00:07.0: bridge window [mem pref disabled]
- pci 0000:00:0a.0: PCI bridge to [bus 04-04]
- pci 0000:00:0a.0: PCI bridge to [bus 04-04]
- pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
- pci 0000:00:0a.0: bridge window [mem disabled]
- pci 0000:00:0a.0: bridge window [mem 0xfcf00000-0xfcffffff 64bit pref]
- pci 0000:00:14.4: PCI bridge to [bus 05-05]
- pci 0000:00:14.4: PCI bridge to [bus 05-05]
- pci 0000:00:14.4: bridge window [io disabled]
- pci 0000:00:14.4: bridge window [mem disabled]
- pci 0000:00:14.4: bridge window [mem pref disabled]
- alloc irq_desc for 18 on node 0
- alloc kstat_irqs on node 0
- pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:02.0: setting latency timer to 64
- alloc irq_desc for 19 on node 0
- alloc kstat_irqs on node 0
- pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:07.0: setting latency timer to 64
- pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:0a.0: setting latency timer to 64
- pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
- pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
- pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- pci_bus 0000:01: resource 1 [mem 0xfd600000-0xfd7fffff]
- pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
- pci_bus 0000:02: resource 1 [mem 0xfd800000-0xfeafffff]
- pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
- pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
- pci_bus 0000:04: resource 2 [mem 0xfcf00000-0xfcffffff 64bit pref]
- pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
- pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
- pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
- pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
- pci_bus 0000:05: resource 8 [mem 0xcff00000-0xdfffffff]
- pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfebfffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
- TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 524288 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
- alloc irq_desc for 16 on node 0
- alloc kstat_irqs on node 0
- pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:12.0: PCI INT A disabled
- pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:12.1: PCI INT A disabled
- alloc irq_desc for 17 on node 0
- alloc kstat_irqs on node 0
- pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:12.2: PCI INT B disabled
- pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:13.0: PCI INT A disabled
- pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:13.1: PCI INT A disabled
- pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- pci 0000:00:13.2: PCI INT B disabled
- pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- pci 0000:00:14.5: PCI INT C disabled
- pci 0000:01:05.0: Boot video device
- pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- pci 0000:03:00.0: PCI INT A disabled
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 15712k freed
- PCI-DMA: Disabling AGP.
- PCI-DMA: aperture base @ 20000000 size 65536 KB
- PCI-DMA: using GART IOMMU.
- PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
- audit: initializing netlink socket (disabled)
- type=2000 audit(1372398960.562:1): initialized
- HugeTLB registered 2 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- msgmni has been set to 31576
- alg: No test for stdrng (krng)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- pcieport 0000:00:02.0: setting latency timer to 64
- alloc irq_desc for 24 on node 0
- alloc kstat_irqs on node 0
- pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
- pcieport 0000:00:07.0: setting latency timer to 64
- alloc irq_desc for 25 on node 0
- alloc kstat_irqs on node 0
- pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
- pcieport 0000:00:0a.0: setting latency timer to 64
- alloc irq_desc for 26 on node 0
- alloc kstat_irqs on node 0
- pcieport 0000:00:0a.0: irq 26 for MSI/MSI-X
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- ACPI: Power Button [PWRB]
- input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- ACPI: Power Button [PWRF]
- ACPI: acpi_idle registered with cpuidle
- ERST: Table is not found!
- GHES: HEST is not enabled!
- Non-volatile memory driver v1.3
- Linux agpgart interface v0.103
- crash memory driver: version 1.1
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- brd: module loaded
- loop: module loaded
- input: Macintosh mouse button emulation as /devices/virtual/input/input2
- Fixed MDIO Bus: probed
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- ehci_hcd 0000:00:12.2: EHCI Host Controller
- ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:12.2: debug port 1
- ehci_hcd 0000:00:12.2: irq 17, io mem 0xfd5ff800
- ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.32-19-pve ehci_hcd
- usb usb1: SerialNumber: 0000:00:12.2
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 6 ports detected
- ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ehci_hcd 0000:00:13.2: EHCI Host Controller
- ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- ehci_hcd 0000:00:13.2: debug port 1
- ehci_hcd 0000:00:13.2: irq 19, io mem 0xfd5ff400
- ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: EHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.32-19-pve ehci_hcd
- usb usb2: SerialNumber: 0000:00:13.2
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 6 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ohci_hcd 0000:00:12.0: OHCI Host Controller
- ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- ohci_hcd 0000:00:12.0: irq 16, io mem 0xfd5fe000
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: OHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.32-19-pve ohci_hcd
- usb usb3: SerialNumber: 0000:00:12.0
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 3 ports detected
- ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- ohci_hcd 0000:00:12.1: OHCI Host Controller
- ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
- ohci_hcd 0000:00:12.1: irq 16, io mem 0xfd5fd000
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: OHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.32-19-pve ohci_hcd
- usb usb4: SerialNumber: 0000:00:12.1
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 3 ports detected
- ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:13.0: OHCI Host Controller
- ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- ohci_hcd 0000:00:13.0: irq 18, io mem 0xfd5fc000
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: OHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.32-19-pve ohci_hcd
- usb usb5: SerialNumber: 0000:00:13.0
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 3 ports detected
- ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:13.1: OHCI Host Controller
- ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
- ohci_hcd 0000:00:13.1: irq 18, io mem 0xfd5fb000
- usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb6: Product: OHCI Host Controller
- usb usb6: Manufacturer: Linux 2.6.32-19-pve ohci_hcd
- usb usb6: SerialNumber: 0000:00:13.1
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 3 ports detected
- ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- ohci_hcd 0000:00:14.5: OHCI Host Controller
- ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
- ohci_hcd 0000:00:14.5: irq 18, io mem 0xfd5fa000
- usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb7: Product: OHCI Host Controller
- usb usb7: Manufacturer: Linux 2.6.32-19-pve ohci_hcd
- usb usb7: SerialNumber: 0000:00:14.5
- usb usb7: configuration #1 chosen from 1 choice
- hub 7-0:1.0: USB hub found
- hub 7-0:1.0: 2 ports detected
- uhci_hcd: USB Universal Host Controller Interface driver
- PNP: No PS/2 controller found. Probing ports directly.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- rtc_cmos 00:03: RTC can wake from S4
- rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.22.6-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- cpuidle: using governor ladder
- cpuidle: using governor menu
- EFI Variables Facility v0.08 2004-May-17
- usbcore: registered new interface driver hiddev
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- TCP cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- Bridge firewalling registered
- Dcache charge unit 924
- registered taskstats version 1
- rtc_cmos 00:03: setting system clock to 2013-06-28 05:56:02 UTC (1372398962)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 1324k freed
- Write protecting the kernel read-only data: 10240k
- Freeing unused kernel memory: 840k freed
- Freeing unused kernel memory: 1672k freed
- udev[110]: starting version 164
- dca service started, version 1.12.1
- Intel(R) Gigabit Ethernet Network Driver - version 4.1.2
- Copyright (c) 2007-2012 Intel Corporation.
- igb 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- igb 0000:02:00.0: setting latency timer to 64
- alloc irq_desc for 27 on node 0
- alloc kstat_irqs on node 0
- igb 0000:02:00.0: irq 27 for MSI/MSI-X
- alloc irq_desc for 28 on node 0
- alloc kstat_irqs on node 0
- igb 0000:02:00.0: irq 28 for MSI/MSI-X
- pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pata_atiixp 0000:00:14.1: setting latency timer to 64
- scsi0 : pata_atiixp
- scsi1 : pata_atiixp
- ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
- r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- r8169 0000:04:00.0: setting latency timer to 64
- alloc irq_desc for 29 on node 0
- alloc kstat_irqs on node 0
- r8169 0000:04:00.0: irq 29 for MSI/MSI-X
- r8169 0000:04:00.0: eth0: RTL8168f/8111f at 0xffffc9000187e000, 50:46:5d:b4:21:7b, XID 08000800 IRQ 29
- r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
- ahci 0000:00:11.0: version 3.0
- alloc irq_desc for 22 on node 0
- alloc kstat_irqs on node 0
- ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
- ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- scsi2 : ahci
- scsi3 : ahci
- scsi4 : ahci
- scsi5 : ahci
- ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
- ata4: SATA max UDMA/133 abar m1024@0xfd5ffc00 port 0xfd5ffd80 irq 22
- ata5: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 22
- ata6: SATA max UDMA/133 abar m1024@0xfd5ffc00 port 0xfd5ffe80 irq 22
- usb 5-2: new low speed USB device number 2 using ohci_hcd
- igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:02:00.0: eth1: (PCIe:2.5GT/s:Width x4)
- igb 0000:02:00.0: eth1: MAC: 90:e2:ba:31:71:60
- igb 0000:02:00.0: eth1: PBA No: E43709-006
- igb 0000:02:00.0: LRO is disabled
- igb 0000:02:00.0: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- igb 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- igb 0000:02:00.1: setting latency timer to 64
- alloc irq_desc for 30 on node 0
- alloc kstat_irqs on node 0
- igb 0000:02:00.1: irq 30 for MSI/MSI-X
- alloc irq_desc for 31 on node 0
- alloc kstat_irqs on node 0
- igb 0000:02:00.1: irq 31 for MSI/MSI-X
- usb 5-2: New USB device found, idVendor=046d, idProduct=c312
- usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 5-2: Product: USB Multimedia Keyboard
- usb 5-2: Manufacturer: BTC
- usb 5-2: configuration #1 chosen from 1 choice
- input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.0/input/input3
- generic-usb 0003:046D:C312.0001: input,hidraw0: USB HID v1.10 Keyboard [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input0
- igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
- igb 0000:02:00.1: eth2: (PCIe:2.5GT/s:Width x4)
- igb 0000:02:00.1: eth2: MAC: 90:e2:ba:31:71:61
- igb 0000:02:00.1: eth2: PBA No: E43709-006
- igb 0000:02:00.1: LRO is disabled
- igb 0000:02:00.1: Using MSI-X interrupts. 1 rx queue(s), 1 tx queue(s)
- input: BTC USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.1/input/input4
- generic-usb 0003:046D:C312.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [BTC USB Multimedia Keyboard] on usb-0000:00:13.0-2/input1
- ata6: SATA link down (SStatus 0 SControl 300)
- ata4: SATA link down (SStatus 0 SControl 300)
- Refined TSC clocksource calibration: 3013.529 MHz.
- Switching to clocksource tsc
- ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata3.00: ATA-8: WDC WD4001FAEX-00MJRA0, 01.01L01, max UDMA/133
- ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata5.00: ATA-8: WDC WD4000FYYZ-01UL1B0, 01.01K01, max UDMA/133
- ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
- ata3.00: configured for UDMA/133
- scsi 2:0:0:0: Direct-Access ATA WDC WD4001FAEX-0 01.0 PQ: 0 ANSI: 5
- sd 2:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
- sd 2:0:0:0: [sda] Write Protect is off
- sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- ata5.00: configured for UDMA/133
- scsi 4:0:0:0: Direct-Access ATA WDC WD4000FYYZ-0 01.0 PQ: 0 ANSI: 5
- sd 4:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
- sda:
- sd 4:0:0:0: [sdb] Write Protect is off
- sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sdb: sdb1
- sd 4:0:0:0: [sdb] Attached SCSI disk
- sda1 sda2 sda3
- sd 2:0:0:0: [sda] Attached SCSI disk
- EXT3-fs (dm-0): recovery required on readonly filesystem
- EXT3-fs (dm-0): write access will be enabled during recovery
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (dm-0): recovery complete
- EXT3-fs (dm-0): mounted filesystem with ordered data mode
- udev[420]: starting version 164
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- xhci_hcd 0000:03:00.0: setting latency timer to 64
- xhci_hcd 0000:03:00.0: xHCI Host Controller
- xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 8
- [drm] Initialized drm 1.1.0 20060810
- MCE: In-kernel MCE decoding enabled.
- xhci_hcd 0000:03:00.0: irq 19, io mem 0xfebf0000
- alloc irq_desc for 32 on node 0
- alloc kstat_irqs on node 0
- xhci_hcd 0000:03:00.0: irq 32 for MSI/MSI-X
- alloc irq_desc for 33 on node 0
- alloc kstat_irqs on node 0
- xhci_hcd 0000:03:00.0: irq 33 for MSI/MSI-X
- alloc irq_desc for 34 on node 0
- alloc kstat_irqs on node 0
- xhci_hcd 0000:03:00.0: irq 34 for MSI/MSI-X
- alloc irq_desc for 35 on node 0
- alloc kstat_irqs on node 0
- xhci_hcd 0000:03:00.0: irq 35 for MSI/MSI-X
- alloc irq_desc for 36 on node 0
- alloc kstat_irqs on node 0
- xhci_hcd 0000:03:00.0: irq 36 for MSI/MSI-X
- usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb8: Product: xHCI Host Controller
- usb usb8: Manufacturer: Linux 2.6.32-19-pve xhci_hcd
- usb usb8: SerialNumber: 0000:03:00.0
- usb usb8: configuration #1 chosen from 1 choice
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 8-0:1.0: USB hub found
- hub 8-0:1.0: 2 ports detected
- xhci_hcd 0000:03:00.0: xHCI Host Controller
- xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 9
- usb usb9: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
- usb usb9: New USB device found, idVendor=1d6b, idProduct=0003
- usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb9: Product: xHCI Host Controller
- usb usb9: Manufacturer: Linux 2.6.32-19-pve xhci_hcd
- usb usb9: SerialNumber: 0000:03:00.0
- usb usb9: configuration #1 chosen from 1 choice
- xHCI xhci_add_endpoint called for root hub
- xHCI xhci_check_bandwidth called for root hub
- hub 9-0:1.0: USB hub found
- hub 9-0:1.0: 2 ports detected
- ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
- ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- parport_pc 00:06: reported by Plug and Play ACPI
- parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- EDAC MC: Ver: 2.1.0 Apr 2 2013
- input: PC Speaker as /devices/platform/pcspkr/input/input5
- [drm] radeon defaulting to kernel modesetting.
- [drm] radeon kernel modesetting enabled.
- AMD64 EDAC driver v3.4.0
- radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- radeon 0000:01:05.0: setting latency timer to 64
- [drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388).
- [drm] register mmio base: 0xFD7F0000
- [drm] register mmio size: 65536
- ATOM BIOS: B27722_RS780C
- radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
- radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
- [drm] Detected VRAM RAM=256M, BAR=256M
- [drm] RAM width 32bits DDR
- EDAC amd64: DRAM ECC disabled.
- EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
- Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
- (Note that use of the override may cause unknown side effects.)
- [TTM] Zone kernel: Available graphics memory: 8085378 kiB.
- [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
- [TTM] Initializing pool allocator.
- [TTM] Initializing DMA pool allocator.
- [drm] radeon: 256M of VRAM memory ready
- [drm] radeon: 512M of GTT memory ready.
- [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [drm] Driver supports precise vblank timestamp query.
- [drm] radeon: irq initialized.
- [drm] GART: num cpu pages 131072, num gpu pages 131072
- [drm] radeon: ib pool ready.
- [drm] Loading RS780 Microcode
- platform radeon_cp.0: firmware: requesting radeon/RS780_pfp.bin
- snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
- input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
- input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
- input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
- input: HDA ATI SB Line-Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
- input: HDA ATI SB Line-Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
- input: HDA ATI SB Line-Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
- input: HDA ATI SB Line-Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
- platform radeon_cp.0: firmware: requesting radeon/RS780_me.bin
- platform radeon_cp.0: firmware: requesting radeon/R600_rlc.bin
- [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
- radeon 0000:01:05.0: WB enabled
- [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff880418e86c00
- [drm] ring test on 0 succeeded in 1 usecs
- [drm] ib test on ring 0 succeeded in 0 usecs
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] VGA
- [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- [drm] Encoders:
- [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [drm] Connector 1:
- [drm] DVI-D
- [drm] HPD1
- [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
- [drm] Encoders:
- [drm] DFP3: INTERNAL_KLDSCP_LVTMA
- [drm] radeon: power management initialized
- [drm] fb mappable at 0xD0142000
- [drm] vram apper at 0xD0000000
- [drm] size 5947392
- [drm] fb depth is 24
- [drm] pitch is 5632
- fbcon: radeondrmfb (fb0) is primary device
- Console: switching to colour frame buffer device 175x65
- fb0: radeondrmfb frame buffer device
- drm: registered panic notifier
- Slow work thread pool: Starting up
- Slow work thread pool: Ready
- [drm] Initialized radeon 2.13.0 20080528 for 0000:01:05.0 on minor 0
- snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- snd_hda_intel 0000:01:05.1: setting latency timer to 64
- EXT3-fs (dm-0): using internal journal
- Adding 15728632k swap on /dev/mapper/pve-swap. Priority:-1 extents:1 across:15728632k
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (dm-2): using internal journal
- EXT3-fs (dm-2): mounted filesystem with ordered data mode
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (sda2): using internal journal
- EXT3-fs (sda2): mounted filesystem with ordered data mode
- ip_tables: (C) 2000-2006 Netfilter Core Team
- Enabling conntracks and NAT for ve0
- nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- device eth0 entered promiscuous mode
- r8169 0000:04:00.0: firmware: requesting rtl_nic/rtl8168f-1.fw
- r8169 0000:04:00.0: eth0: link down
- r8169 0000:04:00.0: eth0: link down
- r8169 0000:04:00.0: eth0: link up
- vmbr0: port 1(eth0) entering forwarding state
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- 8021q: adding VLAN 0 to HW filter on device eth1
- 8021q: adding VLAN 0 to HW filter on device eth2
- device eth2.801 entered promiscuous mode
- device eth2 entered promiscuous mode
- vmbr1: port 1(eth2.801) entering forwarding state
- igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- device eth2.551 entered promiscuous mode
- vmbr2: port 1(eth2.551) entering forwarding state
- igb: eth2 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
- fuse init (API version 7.13)
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- NET: Registered protocol family 10
- iscsi: registered transport (iser)
- drbd: initialized. Version: 8.3.13 (api:88/proto:86-96)
- drbd: GIT-hash: 83ca112086600faacab2f157bc5a9324f7bd7f77 build by root@sighted, 2012-10-09 12:47:51
- drbd: registered as block device major 147
- drbd: minor_table @ 0xffff880418d852c0
- block drbd0: Starting worker thread (from cqueue [1867])
- block drbd0: disk( Diskless -> Attaching )
- block drbd0: Found 4 transactions (192 active extents) in activity log.
- block drbd0: Method to ensure write ordering: barrier
- block drbd0: max BIO size = 131072
- block drbd0: drbd_bm_resize called with capacity == 7813798544
- block drbd0: resync bitmap: bits=976724818 words=15261326 pages=29808
- block drbd0: size = 3726 GB (3906899272 KB)
- DLM (built Apr 2 2013 12:09:07) installed
- block drbd0: bitmap READ of 29808 pages took 1531 jiffies
- block drbd0: recounting of set bits took additional 83 jiffies
- block drbd0: 552 MB (141250 bits) marked out-of-sync by on disk bit-map.
- block drbd0: Marked additional 442 MB as out-of-sync based on AL.
- block drbd0: bitmap WRITE of 0 pages took 0 jiffies
- block drbd0: 994 MB (254487 bits) marked out-of-sync by on disk bit-map.
- block drbd0: disk( Attaching -> UpToDate )
- block drbd0: attached to UUIDs 5EF6949277B72589:A495EDB1FCE3BACF:224160987345EA53:224060987345EA53
- block drbd0: conn( StandAlone -> Unconnected )
- block drbd0: Starting receiver thread (from drbd0_worker [1870])
- block drbd0: receiver (re)started
- block drbd0: conn( Unconnected -> WFConnection )
- vmbr0: no IPv6 routers present
- vmbr1: no IPv6 routers present
- eth2: no IPv6 routers present
- vmbr2: no IPv6 routers present
- eth2.551: no IPv6 routers present
- eth2.801: no IPv6 routers present
- eth0: no IPv6 routers present
- eth1: no IPv6 routers present
- igb: eth1 NIC Link is Down
- igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
- block drbd0: Handshake successful: Agreed network protocol version 96
- block drbd0: Peer authenticated using 20 bytes of 'sha1' HMAC
- block drbd0: conn( WFConnection -> WFReportParams )
- block drbd0: Starting asender thread (from drbd0_receiver [1954])
- block drbd0: data-integrity-alg: <not-used>
- block drbd0: drbd_sync_handshake:
- block drbd0: self 5EF6949277B72588:A495EDB1FCE3BACF:224160987345EA53:224060987345EA53 bits:254487 flags:0
- block drbd0: peer D0CCEF3296BBBD68:A495EDB1FCE3BACF:224160987345EA53:224060987345EA53 bits:0 flags:0
- block drbd0: uuid_compare()=100 by rule 90
- block drbd0: helper command: /sbin/drbdadm initial-split-brain minor-0
- block drbd0: helper command: /sbin/drbdadm initial-split-brain minor-0 exit code 3 (0x300)
- block drbd0: Split-Brain detected, 0 primaries, automatically solved. Sync from this node
- block drbd0: peer( Unknown -> Secondary ) conn( WFReportParams -> WFBitMapS ) pdsk( DUnknown -> Consistent )
- block drbd0: peer( Secondary -> Primary )
- block drbd0: role( Secondary -> Primary )
- block drbd0: helper command: /sbin/drbdadm before-resync-source minor-0
- block drbd0: helper command: /sbin/drbdadm before-resync-source minor-0 exit code 3 (0x300)
- block drbd0: before-resync-source handler returned 3, ignoring. Old userland tools?
- block drbd0: conn( WFBitMapS -> SyncSource ) pdsk( Consistent -> Inconsistent )
- block drbd0: Began resync as SyncSource (will sync 1017948 KB [254487 bits set]).
- block drbd0: updated sync UUID 5EF6949277B72588:A496EDB1FCE3BACF:A495EDB1FCE3BACF:224160987345EA53
- dlm: Using TCP for communications
- kvm: Nested Virtualization enabled
- kvm: Nested Paging enabled
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- FS-Cache: Loaded
- Registering the id_resolver key type
- FS-Cache: Netfs 'nfs' registered for caching
- ploop_dev: module loaded
- dlm: connecting to 2
- EXT3-fs: barriers disabled
- kjournald starting. Commit interval 5 seconds
- EXT3-fs (dm-3): using internal journal
- EXT3-fs (dm-3): recovery complete
- EXT3-fs (dm-3): mounted filesystem with ordered data mode
- venet0: no IPv6 routers present
- block drbd0: Resync done (total 35 sec; paused 0 sec; 29084 K/sec)
- block drbd0: updated UUIDs 5EF6949277B72589:0000000000000000:A496EDB1FCE3BACF:A495EDB1FCE3BACF
- block drbd0: conn( SyncSource -> Connected ) pdsk( Inconsistent -> UpToDate )
- block drbd0: bitmap WRITE of 29610 pages took 1489 jiffies
- block drbd0: 0 KB (0 bits) marked out-of-sync by on disk bit-map.
- device tap101i0 entered promiscuous mode
- vmbr0: port 2(tap101i0) entering forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement