ESPhome meteo Weather wind speed/wind heating

esphome:
  name: pokus2
  platform: ESP8266
  board: nodemcuv2

wifi:
  ssid: '***********'
  password: '***************'

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Meteo Fallback Hotspot"
    password: "Zaloha1234"

captive_portal:

# Enable logging
logger:


api:

ota:

i2c:
  frequency: 100kHz #try for longer distance - currently works at 50' - 1 pair per 5v, Gnd, SDA, SCL

sensor:
  - platform: pulse_counter ##anemometr
    pin:
      # pin D5
      number: GPIO14
      mode: INPUT_PULLUP
    unit_of_measurement: 'm/s' ##change to m/s if metric
    name: 'Anemometr'
    icon: 'mdi:weather-windy'
    id: my_wind
    count_mode:
      rising_edge: DISABLE
      falling_edge: INCREMENT
    internal_filter: 50us
    update_interval: 15s
    #rotations_per_sec = pulses/2/60
    #circ_m=0.09*2*3.14 = 0.5652
    #mps = 1.18*circ_m*rotations_per_sec
    #mps = 1.18*0.5652/2/60 =0,0055578
    filters:
      - multiply: 0.0055578 #use for m/s
      # - multiply: 2.237 #m/s to mph
      # - sliding_window_moving_average:
      #     window_size: 4
      #     send_every: 1
      # - multiply: 0.04973 #1.492mph switch to close 1/sec per spec, pulse/sec (/60/2)*1.492
      # - multiply: 0.0124327986 #m/s * mph conversion

  - platform: adc
    id: adc_sensor
    pin: A0
    name: ADC
    internal: true
    update_interval: 10s
    filters:

    accuracy_decimals: 3 ##IMPORTANT to get resolution for resistance sensor

  - platform: resistance
    sensor: adc_sensor
    id: resistance_sensor
    configuration: DOWNSTREAM
    resistor: 10kOhm
    internal: true
    name: 'smer vetru'
    accuracy_decimals: 1

    on_value:
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 3100
              below: 3200
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "S"
            - sensor.template.publish:
                id: wind_heading
                state: 0.0

      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 1600
              below: 1700
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "SV"
            - sensor.template.publish:
                id: wind_heading
                state: 45.0
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 250
              below: 350
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "V"
            - sensor.template.publish:
                id: wind_heading
                state: 90.0
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 550
              below: 650
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "JV"
            - sensor.template.publish:
                id: wind_heading
                state: 135.0
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 900
              below: 1100
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "J"
            - sensor.template.publish:
                id: wind_heading
                state: 180.0
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 2300
              below: 2450
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "JZ"
            - sensor.template.publish:
                id: wind_heading
                state: 225.0
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 3900
              below: 4100
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "Z"
            - sensor.template.publish:
                id: wind_heading
                state: 270.0
      - if:
          condition:
            sensor.in_range:
              id: resistance_sensor
              above: 3500
              below: 3800
          then:
            - text_sensor.template.publish:
                id: wind_dir_card
                state: "SZ"
            - sensor.template.publish:
                id: wind_heading
                state: 315.0

  - platform: template
    name: "Směr větru ve stupních"
    id: wind_heading
    unit_of_measurement: "°"


#  - platform: wifi_signal
#    name: "WiFi Signal anemometr"
#    update_interval: 60s

text_sensor:
  - platform: template
    name: "Směr větru"
    id: wind_dir_card