Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 6.3.0-rc1-bpi-r3-sfp13 (frank@frank-G5) (aarch64-linux-gnu-gcc (Ubuntu 11.3.0-1ubuntu1~22.04) 11.3.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #3 SMP Mon Mar 13 18:56:3
- [ 0.000000] Machine model: Bananapi BPI-R3
- [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] OF: reserved mem: 0x0000000015194000..0x0000000015194fff (4 KiB) nomap non-reusable wo-boot@15194000
- [ 0.000000] OF: reserved mem: 0x00000000151e0000..0x00000000151e7fff (32 KiB) nomap non-reusable wo-ilm@151e0000
- [ 0.000000] OF: reserved mem: 0x00000000151e8000..0x00000000151e9fff (8 KiB) nomap non-reusable wo-dlm@151e8000
- [ 0.000000] OF: reserved mem: 0x00000000151f0000..0x00000000151f7fff (32 KiB) nomap non-reusable wo-ilm@151f0000
- [ 0.000000] OF: reserved mem: 0x00000000151f8000..0x00000000151f9fff (8 KiB) nomap non-reusable wo-dlm@151f8000
- [ 0.000000] OF: reserved mem: 0x0000000043000000..0x000000004302ffff (192 KiB) nomap non-reusable secmon@43000000
- [ 0.000000] OF: reserved mem: 0x000000004fc00000..0x000000004fcfffff (1024 KiB) nomap non-reusable wmcpu-reserved@4fc00000
- [ 0.000000] OF: reserved mem: 0x000000004fd00000..0x000000004fd3ffff (256 KiB) nomap non-reusable wo-emi@4fd00000
- [ 0.000000] OF: reserved mem: 0x000000004fd40000..0x000000004fd7ffff (256 KiB) nomap non-reusable wo-emi@4fd40000
- [ 0.000000] OF: reserved mem: 0x000000004fd80000..0x000000004ffbffff (2304 KiB) nomap non-reusable wo-data@4fd80000
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000040000000-0x00000000bfffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
- [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
- [ 0.000000] node 0: [mem 0x0000000043030000-0x000000004fbfffff]
- [ 0.000000] node 0: [mem 0x000000004fc00000-0x000000004ffbffff]
- [ 0.000000] node 0: [mem 0x000000004ffc0000-0x00000000bfffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000bfffffff]
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] percpu: Embedded 28 pages/cpu s75880 r8192 d30616 u114688
- [ 0.000000] pcpu-alloc: s75880 r8192 d30616 u114688 alloc=28*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: ARM erratum 845719
- [ 0.000000] alternatives: applying boot alternatives
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516096
- [ 0.000000] Kernel command line: board=bpi-r3 earlycon=uart8250,mmio32,0x11002000 debug=7 root=/dev/mmcblk0p6 rootfstype=ext4 rootwait
- [ 0.000000] Unknown kernel command line parameters "board=bpi-r3", will be passed to user space.
- [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 2029180K/2097152K available (12480K kernel code, 2348K rwdata, 3948K rodata, 4032K init, 418K bss, 67972K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] trace event string verifier disabled
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 640 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] Root IRQ handler: gic_handle_irq
- [ 0.000000] GICv3: GICv3 features: 16 PPIs
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
- [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
- [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
- [ 0.000000] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
- [ 0.008252] Console: colour dummy device 80x25
- [ 0.012714] printk: console [tty0] enabled
- [ 0.016827] printk: bootconsole [uart8250] disabled
- [ 0.021754] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=130000)
- [ 0.021767] pid_max: default: 32768 minimum: 301
- [ 0.021865] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.021881] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.022830] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.022848] cblist_init_generic: Setting shift to 2 and lim to 1.
- [ 0.022949] rcu: Hierarchical SRCU implementation.
- [ 0.022955] rcu: Max phase no-delay instances is 1000.
- [ 0.023335] EFI services will not be available.
- [ 0.023491] smp: Bringing up secondary CPUs ...
- [ 0.023811] Detected VIPT I-cache on CPU1
- [ 0.023851] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
- [ 0.023881] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.024213] Detected VIPT I-cache on CPU2
- [ 0.024236] GICv3: CPU2: found redistributor 2 region 0:0x000000000c0c0000
- [ 0.024248] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
- [ 0.024526] Detected VIPT I-cache on CPU3
- [ 0.024546] GICv3: CPU3: found redistributor 3 region 0:0x000000000c0e0000
- [ 0.024556] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
- [ 0.024587] smp: Brought up 1 node, 4 CPUs
- [ 0.024625] SMP: Total of 4 processors activated.
- [ 0.024632] CPU features: detected: 32-bit EL0 Support
- [ 0.024638] CPU features: detected: CRC32 instructions
- [ 0.024681] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
- [ 0.024691] CPU: All CPU(s) started at EL2
- [ 0.024696] alternatives: applying system-wide alternatives
- [ 0.026223] devtmpfs: initialized
- [ 0.027991] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.028020] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.028130] pinctrl core: initialized pinctrl subsystem
- [ 0.028438] DMI not present or invalid.
- [ 0.028792] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.029084] DMA: preallocated 256 KiB GFP_KERNEL pool for atomic allocations
- [ 0.029124] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.029155] DMA: preallocated 256 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.029542] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.029545] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.029552] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.029558] thermal_sys: Registered thermal governor 'user_space'
- [ 0.029651] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.029712] ASID allocator initialised with 65536 entries
- [ 0.044938] cryptd: max_cpu_qlen set to 1000
- [ 0.045801] iommu: Default domain type: Translated
- [ 0.045822] iommu: DMA domain TLB invalidation policy: strict mode
- [ 0.045955] SCSI subsystem initialized
- [ 0.046052] libata version 3.00 loaded.
- [ 0.046151] usbcore: registered new interface driver usbfs
- [ 0.046177] usbcore: registered new interface driver hub
- [ 0.046200] usbcore: registered new device driver usb
- [ 0.046428] i2c-gpio i2c-gpio-0: using lines 528 (SDA) and 529 (SCL)
- [ 0.046540] i2c-gpio i2c-gpio-1: using lines 530 (SDA) and 531 (SCL)
- [ 0.046584] pps_core: LinuxPPS API ver. 1 registered
- [ 0.046591] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.046607] PTP clock support registered
- [ 0.047355] vgaarb: loaded
- [ 0.520859] clocksource: Switched to clocksource arch_sys_counter
- [ 0.527757] NET: Registered PF_INET protocol family
- [ 0.527958] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.529088] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
- [ 0.529136] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.529152] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.529229] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 0.529634] TCP: Hash tables configured (established 16384 bind 16384)
- [ 0.529761] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.529807] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.529990] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 0.530486] RPC: Registered named UNIX socket transport module.
- [ 0.530509] RPC: Registered udp transport module.
- [ 0.530514] RPC: Registered tcp transport module.
- [ 0.530521] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.530537] PCI: CLS 0 bytes, default 64
- [ 0.540947] Initialise system trusted keyrings
- [ 0.541103] workingset: timestamp_bits=46 max_order=19 bucket_order=0
- [ 0.541337] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.541526] NFS: Registering the id_resolver key type
- [ 0.541551] Key type id_resolver registered
- [ 0.541557] Key type id_legacy registered
- [ 0.541576] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.541584] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 0.541604] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
- [ 0.563540] Key type asymmetric registered
- [ 0.563551] Asymmetric key parser 'x509' registered
- [ 0.563592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 0.563603] io scheduler mq-deadline registered
- [ 0.563612] io scheduler kyber registered
- [ 0.563641] io scheduler bfq registered
- [ 0.595434] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
- [ 0.616951] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 2500000) is a ST16650V2
- [ 0.617021] printk: console [ttyS0] enabled
- [ 1.597805] 11003000.serial: ttyS1 at MMIO 0x11003000 (irq = 117, base_baud = 1625000) is a ST16650V2
- [ 1.628175] 11004000.serial: ttyS2 at MMIO 0x11004000 (irq = 118, base_baud = 1625000) is a ST16650V2
- [ 1.638138] mtk_rng 1020f000.rng: registered RNG driver
- [ 1.647120] loop: module loaded
- [ 1.652489] sfp sfp-1: Host maximum power 1.0W
- [ 1.657484] sfp sfp-2: Host maximum power 1.0W
- [ 1.793708] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc00b100000, irq 123
- [ 1.802911] mtk_soc_eth 15100000.ethernet: generated random MAC address d6:fc:0d:b8:f5:98
- [ 1.811313] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc00b100000, irq 123
- [ 1.820842] usbcore: registered new interface driver usb-storage
- [ 1.827023] i2c_dev: i2c /dev entries driver
- [ 1.832685] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
- [ 1.841304] SMCCC: SOC_ID: ID = jep106:0426:7986 Revision = 0x00000000
- [ 1.847939] usbcore: registered new interface driver usbhid
- [ 1.853540] usbhid: USB HID core driver
- [ 1.857544] NET: Registered PF_INET6 protocol family
- [ 1.863187] Segment Routing with IPv6
- [ 1.866869] In-situ OAM (IOAM) with IPv6
- [ 1.870980] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
- [ 1.877402] NET: Registered PF_PACKET protocol family
- [ 1.882618] 8021q: 802.1Q VLAN Support v1.8
- [ 1.893038] Loading compiled-in X.509 certificates
- [ 1.907334] mtk-pcie-gen3 11280000.pcie: host bridge /soc/pcie@11280000 ranges:
- [ 1.914684] mtk-pcie-gen3 11280000.pcie: Parsing ranges property...
- [ 1.918713] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.920952] mtk-pcie-gen3 11280000.pcie: MEM 0x0020000000..0x002fffffff -> 0x0020000000
- [ 1.942783] mmc0: new high speed SDHC card at address aaaa
- [ 1.949128] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
- [ 1.964623] mmcblk0: p1 p2 p3 p4 p5 p6
- [ 1.990637] sfp sfp-1: module OEM SFP-2.5G-T rev 1.0 sn SK2301110008 dc 230110
- [ 2.000147] mtk_soc_eth 15100000.ethernet eth1: optical SFP: interfaces=[mac=2-4,21-22, sfp=]
- [ 2.008678] mtk_soc_eth 15100000.ethernet eth1: unsupported SFP module: no common interface modes
- [ 2.046477] hwmon hwmon0: temp1_input not attached to any thermal zone
- [ 2.069406] mtk-pcie-gen3 11280000.pcie: set MEM trans window[0]: cpu_addr = 0x20000000, pci_addr = 0x20000000, size = 0x10000000
- [ 2.081271] mtk-pcie-gen3 11280000.pcie: PCI host bridge to bus 0000:00
- [ 2.087872] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 2.093363] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
- [ 2.100223] pci_bus 0000:00: scanning bus
- [ 2.104250] pci 0000:00:00.0: [14c3:1f32] type 01 class 0x060400
- [ 2.110257] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
- [ 2.117103] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- [ 2.123189] pci 0000:00:00.0: PME# disabled
- [ 2.127485] pci 0000:00:00.0: vgaarb: pci_notify
- [ 2.132582] pci_bus 0000:00: fixups for bus
- [ 2.136757] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
- [ 2.143448] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 2.151445] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
- [ 2.158194] pci_bus 0000:01: scanning bus
- [ 2.162223] pci 0000:01:00.0: [c0a9:540a] type 00 class 0x010802
- [ 2.168242] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
- [ 2.175220] pci 0000:01:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:00.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
- [ 2.190268] pci 0000:01:00.0: vgaarb: pci_notify
- [ 2.220867] pci_bus 0000:01: fixups for bus
- [ 2.225040] pci_bus 0000:01: bus scan returning with max=01
- [ 2.230598] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 2.237210] pci_bus 0000:00: bus scan returning with max=01
- [ 2.242790] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
- [ 2.249562] pci 0000:00:00.0: BAR 0: assigned [mem 0x20100000-0x20107fff 64bit]
- [ 2.256868] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x20003fff 64bit]
- [ 2.264177] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 2.269131] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
- [ 2.275975] pcieport 0000:00:00.0: vgaarb: pci_notify
- [ 2.281071] pcieport 0000:00:00.0: assign IRQ: got 130
- [ 2.286204] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
- [ 2.292300] pcieport 0000:00:00.0: enabling bus mastering
- [ 2.298054] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
- [ 2.306488] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
- [ 2.314913] mtk-pcie-gen3 11280000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11280c00 data 2
- [ 2.323336] mtk-pcie-gen3 11280000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11280c00 data 3
- [ 2.331760] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
- [ 2.340180] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
- [ 2.348606] mtk-pcie-gen3 11280000.pcie: msi#0x6 address_hi 0x0 address_lo 0x11280c00 data 6
- [ 2.357030] mtk-pcie-gen3 11280000.pcie: msi#0x7 address_hi 0x0 address_lo 0x11280c00 data 7
- [ 2.365455] mtk-pcie-gen3 11280000.pcie: msi#0x8 address_hi 0x0 address_lo 0x11280c00 data 8
- [ 2.373878] mtk-pcie-gen3 11280000.pcie: msi#0x9 address_hi 0x0 address_lo 0x11280c00 data 9
- [ 2.382303] mtk-pcie-gen3 11280000.pcie: msi#0xa address_hi 0x0 address_lo 0x11280c00 data 10
- [ 2.390808] mtk-pcie-gen3 11280000.pcie: msi#0xb address_hi 0x0 address_lo 0x11280c00 data 11
- [ 2.399318] mtk-pcie-gen3 11280000.pcie: msi#0xc address_hi 0x0 address_lo 0x11280c00 data 12
- [ 2.407828] mtk-pcie-gen3 11280000.pcie: msi#0xd address_hi 0x0 address_lo 0x11280c00 data 13
- [ 2.416339] mtk-pcie-gen3 11280000.pcie: msi#0xe address_hi 0x0 address_lo 0x11280c00 data 14
- [ 2.424850] mtk-pcie-gen3 11280000.pcie: msi#0xf address_hi 0x0 address_lo 0x11280c00 data 15
- [ 2.433360] mtk-pcie-gen3 11280000.pcie: msi#0x10 address_hi 0x0 address_lo 0x11280c00 data 16
- [ 2.441957] mtk-pcie-gen3 11280000.pcie: msi#0x11 address_hi 0x0 address_lo 0x11280c00 data 17
- [ 2.450550] mtk-pcie-gen3 11280000.pcie: msi#0x12 address_hi 0x0 address_lo 0x11280c00 data 18
- [ 2.459147] mtk-pcie-gen3 11280000.pcie: msi#0x13 address_hi 0x0 address_lo 0x11280c00 data 19
- [ 2.467746] mtk-pcie-gen3 11280000.pcie: msi#0x14 address_hi 0x0 address_lo 0x11280c00 data 20
- [ 2.476344] mtk-pcie-gen3 11280000.pcie: msi#0x15 address_hi 0x0 address_lo 0x11280c00 data 21
- [ 2.484941] mtk-pcie-gen3 11280000.pcie: msi#0x16 address_hi 0x0 address_lo 0x11280c00 data 22
- [ 2.493538] mtk-pcie-gen3 11280000.pcie: msi#0x17 address_hi 0x0 address_lo 0x11280c00 data 23
- [ 2.502135] mtk-pcie-gen3 11280000.pcie: msi#0x18 address_hi 0x0 address_lo 0x11280c00 data 24
- [ 2.510726] mtk-pcie-gen3 11280000.pcie: msi#0x19 address_hi 0x0 address_lo 0x11280c00 data 25
- [ 2.519323] mtk-pcie-gen3 11280000.pcie: msi#0x1a address_hi 0x0 address_lo 0x11280c00 data 26
- [ 2.527919] mtk-pcie-gen3 11280000.pcie: msi#0x1b address_hi 0x0 address_lo 0x11280c00 data 27
- [ 2.536516] mtk-pcie-gen3 11280000.pcie: msi#0x1c address_hi 0x0 address_lo 0x11280c00 data 28
- [ 2.545113] mtk-pcie-gen3 11280000.pcie: msi#0x1d address_hi 0x0 address_lo 0x11280c00 data 29
- [ 2.553710] mtk-pcie-gen3 11280000.pcie: msi#0x1e address_hi 0x0 address_lo 0x11280c00 data 30
- [ 2.562308] mtk-pcie-gen3 11280000.pcie: msi#0x1f address_hi 0x0 address_lo 0x11280c00 data 31
- [ 2.571256] mtk-pcie-gen3 11280000.pcie: msi#0x0 address_hi 0x0 address_lo 0x11280c00 data 0
- [ 2.579784] pcieport 0000:00:00.0: PME: Signaling with IRQ 131
- [ 2.585910] pcieport 0000:00:00.0: AER: enabled with IRQ 131
- [ 2.591649] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x1f3214c3)
- [ 2.599809] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100406)
- [ 2.607805] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0x6040001)
- [ 2.615883] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10000)
- [ 2.623787] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0x20100004)
- [ 2.632037] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
- [ 2.639676] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0x10100)
- [ 2.647670] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0x1f1)
- [ 2.655486] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x20002000)
- [ 2.663736] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x1fff1)
- [ 2.671725] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
- [ 2.679364] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
- [ 2.687007] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
- [ 2.694650] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x80)
- [ 2.702379] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
- [ 2.710018] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x20182)
- [ 2.718039] pcieport 0000:00:00.0: vgaarb: pci_notify
- [ 2.723182] nvme 0000:01:00.0: vgaarb: pci_notify
- [ 2.727898] nvme 0000:01:00.0: assign IRQ: got 130
- [ 2.732856] nvme nvme0: pci function 0000:01:00.0
- [ 2.737556] nvme 0000:01:00.0: enabling device (0000 -> 0002)
- [ 2.743307] nvme 0000:01:00.0: enabling bus mastering
- [ 2.748412] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
- [ 2.756886] nvme 0000:01:00.0: saving config space at offset 0x0 (reading 0x540ac0a9)
- [ 2.764708] nvme 0000:01:00.0: saving config space at offset 0x4 (reading 0x100406)
- [ 2.772353] nvme 0000:01:00.0: saving config space at offset 0x8 (reading 0x1080201)
- [ 2.780079] nvme 0000:01:00.0: saving config space at offset 0xc (reading 0x0)
- [ 2.787290] nvme 0000:01:00.0: saving config space at offset 0x10 (reading 0x20000004)
- [ 2.795194] nvme 0000:01:00.0: saving config space at offset 0x14 (reading 0x0)
- [ 2.802492] nvme 0000:01:00.0: saving config space at offset 0x18 (reading 0x0)
- [ 2.809785] nvme 0000:01:00.0: saving config space at offset 0x1c (reading 0x0)
- [ 2.817083] nvme 0000:01:00.0: saving config space at offset 0x20 (reading 0x0)
- [ 2.824380] nvme 0000:01:00.0: saving config space at offset 0x24 (reading 0x0)
- [ 2.831678] nvme 0000:01:00.0: saving config space at offset 0x28 (reading 0x0)
- [ 2.838971] nvme 0000:01:00.0: saving config space at offset 0x2c (reading 0x540ac0a9)
- [ 2.846876] nvme 0000:01:00.0: saving config space at offset 0x30 (reading 0x0)
- [ 2.854173] nvme 0000:01:00.0: saving config space at offset 0x34 (reading 0x80)
- [ 2.861558] nvme 0000:01:00.0: saving config space at offset 0x38 (reading 0x0)
- [ 2.868850] nvme 0000:01:00.0: saving config space at offset 0x3c (reading 0x182)
- [ 2.881958] nvme nvme0: missing or invalid SUBNQN field.
- [ 2.897616] nvme nvme0: allocated 128 MiB host memory buffer.
- [ 2.927574] mtk-pcie-gen3 11280000.pcie: msi#0x1 address_hi 0x0 address_lo 0x11280c00 data 1
- [ 2.936028] mtk-pcie-gen3 11280000.pcie: msi#0x2 address_hi 0x0 address_lo 0x11280c00 data 2
- [ 2.944472] mtk-pcie-gen3 11280000.pcie: msi#0x3 address_hi 0x0 address_lo 0x11280c00 data 3
- [ 2.952917] mtk-pcie-gen3 11280000.pcie: msi#0x4 address_hi 0x0 address_lo 0x11280c00 data 4
- [ 2.961360] mtk-pcie-gen3 11280000.pcie: msi#0x5 address_hi 0x0 address_lo 0x11280c00 data 5
- [ 3.158928] nvme nvme0: 4/0/0 default/read/poll queues
- [ 3.171573] nvme nvme0: Ignoring bogus Namespace Identifiers
- [ 3.180326] nvme 0000:01:00.0: vgaarb: pci_notify
- [ 3.237777] mt7530 mdio-bus:1f: configuring for fixed/2500base-x link mode
- [ 3.244669] mt7530 mdio-bus:1f: major config 2500base-x
- [ 3.249881] mt7530 mdio-bus:1f: phylink_mac_config: mode=fixed/2500base-x/2.5Gbps/Full/none adv=00,00000000,00008000,00006240 pause=03 link=0 an=1
- [ 3.264983] mt7530 mdio-bus:1f: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 3.273670] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=137)
- [ 3.283493] mt7530 mdio-bus:1f wan (uninitialized): phy: gmii setting supported 00,00000000,00000000,000062ef advertising 00,00000000,00000000,000062ef
- [ 3.307220] mt7530 mdio-bus:1f lan0 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=138)
- [ 3.317138] mt7530 mdio-bus:1f lan0 (uninitialized): phy: gmii setting supported 00,00000000,00000000,000062ef advertising 00,00000000,00000000,000062ef
- [ 3.340544] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=139)
- [ 3.350467] mt7530 mdio-bus:1f lan1 (uninitialized): phy: gmii setting supported 00,00000000,00000000,000062ef advertising 00,00000000,00000000,000062ef
- [ 3.373877] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=140)
- [ 3.383792] mt7530 mdio-bus:1f lan2 (uninitialized): phy: gmii setting supported 00,00000000,00000000,000062ef advertising 00,00000000,00000000,000062ef
- [ 3.407201] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=141)
- [ 3.417124] mt7530 mdio-bus:1f lan3 (uninitialized): phy: gmii setting supported 00,00000000,00000000,000062ef advertising 00,00000000,00000000,000062ef
- [ 3.431813] mtk_soc_eth 15100000.ethernet eth0: entered promiscuous mode
- [ 3.438546] DSA: tree 0 setup
- [ 3.441930] xhci-mtk 11200000.usb: supply vbus not found, using dummy regulator
- [ 3.449344] xhci-mtk 11200000.usb: supply vusb33 not found, using dummy regulator
- [ 3.457690] xhci-mtk 11200000.usb: xHCI Host Controller
- [ 3.462941] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 1
- [ 3.473378] xhci-mtk 11200000.usb: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010
- [ 3.482543] xhci-mtk 11200000.usb: irq 142, io mem 0x11200000
- [ 3.488370] xhci-mtk 11200000.usb: xHCI Host Controller
- [ 3.493589] xhci-mtk 11200000.usb: new USB bus registered, assigned bus number 2
- [ 3.500976] xhci-mtk 11200000.usb: Host supports USB 3.2 Enhanced SuperSpeed
- [ 3.508431] hub 1-0:1.0: USB hub found
- [ 3.512206] hub 1-0:1.0: 2 ports detected
- [ 3.516464] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 3.524899] hub 2-0:1.0: USB hub found
- [ 3.528663] hub 2-0:1.0: 1 port detected
- [ 3.547008] EXT4-fs (mmcblk0p6): mounted filesystem 445dcf05-45ef-4a3d-95ec-d70068e7b1fb with ordered data mode. Quota mode: disabled.
- [ 3.559147] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
- [ 3.577377] devtmpfs: mounted
- [ 3.581725] Freeing unused kernel memory: 4032K
- [ 3.660896] Run /sbin/init as init process
- [ 3.664985] with arguments:
- [ 3.667942] /sbin/init
- [ 3.670637] with environment:
- [ 3.673778] HOME=/
- [ 3.676126] TERM=linux
- [ 3.678821] board=bpi-r3
- [ 3.960865] usb 1-1: new high-speed USB device number 2 using xhci-mtk
- [ 4.141735] hub 1-1:1.0: USB hub found
- [ 4.145664] hub 1-1:1.0: 4 ports detected
- [ 4.361561] systemd[1]: System time before build time, advancing clock.
- [ 4.442307] systemd[1]: Failed to find module 'autofs4'
- [ 4.592880] systemd[1]: systemd 247.3-7+deb11u1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP)
- [ 4.616108] systemd[1]: Detected architecture arm64.
- [ 4.663513] systemd[1]: Set hostname to <bpi-r3>.
- [ 4.907372] block mmcblk0: the capability attribute has been deprecated.
- [ 5.127318] systemd[1]: /etc/systemd/system/rc-local.service:11: Support for option SysVStartPriority= has been removed and it is ignored
- [ 5.165770] systemd[1]: Queued start job for default target Graphical Interface.
- [ 12.011092] random: crng init done
- [ 12.011231] systemd[1]: system-getty.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
- [ 12.026841] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
- [ 12.071901] systemd[1]: Created slice system-getty.slice.
- [ 12.111724] systemd[1]: Created slice system-modprobe.slice.
- [ 12.151661] systemd[1]: Created slice system-serial\x2dgetty.slice.
- [ 12.191541] systemd[1]: Created slice User and Session Slice.
- [ 12.231134] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 12.271033] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 12.311005] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
- [ 12.322684] systemd[1]: Reached target Local Encrypted Volumes.
- [ 12.360967] systemd[1]: Reached target Paths.
- [ 12.390903] systemd[1]: Reached target Remote File Systems.
- [ 12.430892] systemd[1]: Reached target Slices.
- [ 12.460912] systemd[1]: Reached target Swap.
- [ 12.491340] systemd[1]: Listening on Syslog Socket.
- [ 12.521118] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 12.565978] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
- [ 12.574531] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 12.611317] systemd[1]: Listening on Journal Socket.
- [ 12.641403] systemd[1]: Listening on Network Service Netlink Socket.
- [ 12.681329] systemd[1]: Listening on udev Control Socket.
- [ 12.721233] systemd[1]: Listening on udev Kernel Socket.
- [ 12.761273] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- [ 12.821055] systemd[1]: Mounting POSIX Message Queue File System...
- [ 12.863343] systemd[1]: Mounting Kernel Debug File System...
- [ 12.903255] systemd[1]: Mounting Kernel Trace File System...
- [ 12.943563] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 12.983399] systemd[1]: Starting Load Kernel Module configfs...
- [ 13.023390] systemd[1]: Starting Load Kernel Module drm...
- [ 13.063475] systemd[1]: Starting Load Kernel Module fuse...
- [ 13.197827] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 13.251351] systemd[1]: Starting Journal Service...
- [ 13.310575] fuse: init (API version 7.38)
- [ 13.313672] systemd[1]: Starting Load Kernel Modules...
- [ 13.353384] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 13.393423] systemd[1]: Starting Coldplug All udev Devices...
- [ 13.410742] EXT4-fs (mmcblk0p6): re-mounted 445dcf05-45ef-4a3d-95ec-d70068e7b1fb. Quota mode: disabled.
- [ 13.435017] systemd[1]: Started Journal Service.
- [ 13.908441] systemd-journald[1319]: Received client request to flush runtime journal.
- [ 13.931293] systemd-journald[1319]: File /var/log/journal/b13246c68cda406d8d0edc8d9b8cf614/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 15.247576] lanbr0: port 1(lan3) entered blocking state
- [ 15.252871] lanbr0: port 1(lan3) entered disabled state
- [ 15.258128] mt7530 mdio-bus:1f lan3: entered allmulticast mode
- [ 15.263991] mtk_soc_eth 15100000.ethernet eth0: entered allmulticast mode
- [ 15.272982] mt7530 mdio-bus:1f lan3: entered promiscuous mode
- [ 15.281537] lanbr0: port 2(lan2) entered blocking state
- [ 15.286790] lanbr0: port 2(lan2) entered disabled state
- [ 15.292140] mt7530 mdio-bus:1f lan2: entered allmulticast mode
- [ 15.300526] mt7530 mdio-bus:1f lan2: entered promiscuous mode
- [ 15.309080] lanbr0: port 3(lan1) entered blocking state
- [ 15.314468] lanbr0: port 3(lan1) entered disabled state
- [ 15.319734] mt7530 mdio-bus:1f lan1: entered allmulticast mode
- [ 15.327204] mt7530 mdio-bus:1f lan1: entered promiscuous mode
- [ 15.335506] lanbr0: port 4(lan0) entered blocking state
- [ 15.340756] lanbr0: port 4(lan0) entered disabled state
- [ 15.346131] mt7530 mdio-bus:1f lan0: entered allmulticast mode
- [ 15.353350] mt7530 mdio-bus:1f lan0: entered promiscuous mode
- [ 15.366464] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
- [ 15.374814] mtk_soc_eth 15100000.ethernet eth0: major config 2500base-x
- [ 15.381454] mtk_soc_eth 15100000.ethernet eth0: phylink_mac_config: mode=fixed/2500base-x/2.5Gbps/Full/none adv=00,00000000,00008000,00006240 pause=03 link=0 an=1
- [ 15.396192] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 15.402350] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
- [ 15.411468] mt7530 mdio-bus:1f lan3: major config gmii
- [ 15.416612] mt7530 mdio-bus:1f lan3: phylink_mac_config: mode=phy/gmii/Unknown/Unknown/none adv=00,00000000,00000000,00000000 pause=00 link=0 an=0
- [ 15.431447] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
- [ 15.432983] mt7530 mdio-bus:1f lan3: phy link down gmii/Unknown/Unknown/none/off
- [ 15.438058] mt7530 mdio-bus:1f lan2: major config gmii
- [ 15.450615] mt7530 mdio-bus:1f lan2: phylink_mac_config: mode=phy/gmii/Unknown/Unknown/none adv=00,00000000,00000000,00000000 pause=00 link=0 an=0
- [ 15.465506] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 15.467307] mt7530 mdio-bus:1f lan2: phy link down gmii/Unknown/Unknown/none/off
- [ 15.472177] mt7530 mdio-bus:1f lan1: major config gmii
- [ 15.484749] mt7530 mdio-bus:1f lan1: phylink_mac_config: mode=phy/gmii/Unknown/Unknown/none adv=00,00000000,00000000,00000000 pause=00 link=0 an=0
- [ 15.499478] mt7530 mdio-bus:1f lan0: configuring for phy/gmii link mode
- [ 15.501299] mt7530 mdio-bus:1f lan1: phy link down gmii/Unknown/Unknown/none/off
- [ 15.506124] mt7530 mdio-bus:1f lan0: major config gmii
- [ 15.518618] mt7530 mdio-bus:1f lan0: phylink_mac_config: mode=phy/gmii/Unknown/Unknown/none adv=00,00000000,00000000,00000000 pause=00 link=0 an=0
- [ 15.535556] mt7530 mdio-bus:1f lan0: phy link down gmii/Unknown/Unknown/none/off
- [ 15.581874] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
- [ 15.588413] mt7530 mdio-bus:1f wan: major config gmii
- [ 15.593502] mt7530 mdio-bus:1f wan: phylink_mac_config: mode=phy/gmii/Unknown/Unknown/none adv=00,00000000,00000000,00000000 pause=00 link=0 an=0
- [ 15.607113] mt7530 mdio-bus:1f wan: entered promiscuous mode
- [ 15.609581] mt7530 mdio-bus:1f wan: phy link up gmii/1Gbps/Full/none/rx/tx
- [ 15.609773] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 15.612942] IPv6: ADDRCONF(NETDEV_CHANGE): wan.110: link becomes ready
- [ 15.633698] IPv6: ADDRCONF(NETDEV_CHANGE): wan.140: link becomes ready
- [ 15.640290] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
- [ 18.552230] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 18.570894] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 18.609849] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
- [ 25.135919] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=2714 'systemd'
- [ 56.321102] mtk_soc_eth 15100000.ethernet eth1: configuring for inband/2500base-x link mode
- [ 56.329543] mtk_soc_eth 15100000.ethernet eth1: major config 2500base-x
- [ 56.336144] mtk_soc_eth 15100000.ethernet eth1: phylink_mac_config: mode=inband/2500base-x/Unknown/Unknown/none adv=00,00000000,00000000,0000e240 pause=04 link=0 an=1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement