API tools faq
paste
Guest User

HGST Drive Test

a guest
Feb 23rd, 2019
158
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.68 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.16.3-pmagic64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: HGST Travelstar 5K1000
  6. Device Model: HGST HTS541075A9E680
  7. Serial Number: JD11001V02RTNM
  8. LU WWN Device Id: 5 000cca 768c13e50
  9. Firmware Version: JA2OA560
  10. User Capacity: 750,156,374,016 bytes [750 GB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 2.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ATA8-ACS T13/1699-D revision 6
  16. SATA Version is: SATA 2.6, 6.0 Gb/s (current: 1.5 Gb/s)
  17. Local Time is: Sat Feb 23 20:01:09 2019 CST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20. AAM feature is: Unavailable
  21. APM level is: 1 (minimum power consumption with standby)
  22. Rd look-ahead is: Enabled
  23. Write cache is: Enabled
  24. DSN feature is: Unavailable
  25. ATA Security is: Disabled, NOT FROZEN [SEC1]
  26.  
  27. === START OF READ SMART DATA SECTION ===
  28. SMART overall-health self-assessment test result: PASSED
  29.  
  30. General SMART Values:
  31. Offline data collection status: (0x80) Offline data collection activity
  32. was never started.
  33. Auto Offline Data Collection: Enabled.
  34. Self-test execution status: ( 0) The previous self-test routine completed
  35. without error or no self-test has ever
  36. been run.
  37. Total time to complete Offline
  38. data collection: ( 45) seconds.
  39. Offline data collection
  40. capabilities: (0x5b) SMART execute Offline immediate.
  41. Auto Offline data collection on/off support.
  42. Suspend Offline collection upon new
  43. command.
  44. Offline surface scan supported.
  45. Self-test supported.
  46. No Conveyance Self-test supported.
  47. Selective Self-test supported.
  48. SMART capabilities: (0x0003) Saves SMART data before entering
  49. power-saving mode.
  50. Supports SMART auto save timer.
  51. Error logging capability: (0x01) Error logging supported.
  52. General Purpose Logging supported.
  53. Short self-test routine
  54. recommended polling time: ( 2) minutes.
  55. Extended self-test routine
  56. recommended polling time: ( 206) minutes.
  57. SCT capabilities: (0x003d) SCT Status supported.
  58. SCT Error Recovery Control supported.
  59. SCT Feature Control supported.
  60. SCT Data Table supported.
  61.  
  62. SMART Attributes Data Structure revision number: 16
  63. Vendor Specific SMART Attributes with Thresholds:
  64. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  65. 1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0
  66. 2 Throughput_Performance P-S--- 100 100 040 - 0
  67. 3 Spin_Up_Time POS--- 202 202 033 - 1
  68. 4 Start_Stop_Count -O--C- 084 084 000 - 26738
  69. 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
  70. 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
  71. 8 Seek_Time_Performance P-S--- 100 100 040 - 0
  72. 9 Power_On_Hours -O--C- 034 034 000 - 29067
  73. 10 Spin_Retry_Count PO--C- 100 100 060 - 0
  74. 12 Power_Cycle_Count -O--CK 100 100 000 - 1139
  75. 191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0
  76. 192 Power-Off_Retract_Count -O--CK 100 100 000 - 114
  77. 193 Load_Cycle_Count -O--C- 072 072 000 - 280465
  78. 194 Temperature_Celsius -O---- 166 166 000 - 36 (Min/Max 6/49)
  79. 196 Reallocated_Event_Count -O--CK 100 100 000 - 4
  80. 197 Current_Pending_Sector -O---K 100 100 000 - 0
  81. 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
  82. 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 27
  83. 223 Load_Retry_Count -O-R-- 100 100 000 - 0
  84. ||||||_ K auto-keep
  85. |||||__ C event count
  86. ||||___ R error rate
  87. |||____ S speed/performance
  88. ||_____ O updated online
  89. |______ P prefailure warning
  90.  
  91. ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
  92. Read GP Log Directory failed
  93.  
  94. SMART Log Directory Version 1 [multi-sector log support]
  95. Address Access R/W Size Description
  96. 0x00 SL R/O 1 Log Directory
  97. 0x01 SL R/O 1 Summary SMART error log
  98. 0x02 SL R/O 1 Comprehensive SMART error log
  99. 0x06 SL R/O 1 SMART self-test log
  100. 0x09 SL R/W 1 Selective self-test log
  101. 0x80-0x9f SL R/W 16 Host vendor specific log
  102. 0xe0 SL R/W 1 SCT Command/Status
  103. 0xe1 SL R/W 1 SCT Data Transfer
  104.  
  105. SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
  106.  
  107. SMART Error Log Version: 1
  108. ATA Error Count: 38 (device log contains only the most recent five errors)
  109. CR = Command Register [HEX]
  110. FR = Features Register [HEX]
  111. SC = Sector Count Register [HEX]
  112. SN = Sector Number Register [HEX]
  113. CL = Cylinder Low Register [HEX]
  114. CH = Cylinder High Register [HEX]
  115. DH = Device/Head Register [HEX]
  116. DC = Device Command Register [HEX]
  117. ER = Error register [HEX]
  118. ST = Status register [HEX]
  119. Powered_Up_Time is measured from power on, and printed as
  120. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  121. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  122.  
  123. Error 38 occurred at disk power-on lifetime: 29034 hours (1209 days + 18 hours)
  124. When the command that caused the error occurred, the device was active or idle.
  125.  
  126. After command completion occurred, registers were:
  127. ER ST SC SN CL CH DH
  128. -- -- -- -- -- -- --
  129. 10 51 08 00 00 00 00 Error: IDNF 8 sectors at LBA = 0x00000000 = 0
  130.  
  131. Commands leading to the command that caused the error were:
  132. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  133. -- -- -- -- -- -- -- -- ---------------- --------------------
  134. 25 00 08 00 00 00 e0 00 00:00:05.891 READ DMA EXT
  135. ef 03 46 00 00 00 a0 00 00:00:05.888 SET FEATURES [Set transfer mode]
  136. e5 00 00 00 00 00 a0 00 00:00:05.883 CHECK POWER MODE
  137. ef 03 00 00 00 00 00 04 00:00:02.164 SET FEATURES [Set transfer mode]
  138. ef 03 46 00 00 00 a0 00 00:00:00.748 SET FEATURES [Set transfer mode]
  139.  
  140. Error 37 occurred at disk power-on lifetime: 29027 hours (1209 days + 11 hours)
  141. When the command that caused the error occurred, the device was active or idle.
  142.  
  143. After command completion occurred, registers were:
  144. ER ST SC SN CL CH DH
  145. -- -- -- -- -- -- --
  146. 10 51 08 a8 2a 0c 00 Error: IDNF 8 sectors at LBA = 0x000c2aa8 = 797352
  147.  
  148. Commands leading to the command that caused the error were:
  149. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  150. -- -- -- -- -- -- -- -- ---------------- --------------------
  151. 25 00 08 a8 2a 0c e0 00 00:01:30.679 READ DMA EXT
  152. ef 03 46 00 00 00 a0 00 00:01:30.674 SET FEATURES [Set transfer mode]
  153. 25 00 04 e0 af 0c 00 04 00:01:30.649 READ DMA EXT
  154. 25 00 04 e0 af 0c e0 00 00:01:14.253 READ DMA EXT
  155. ef 03 46 00 00 00 a0 00 00:01:14.252 SET FEATURES [Set transfer mode]
  156.  
  157. Error 36 occurred at disk power-on lifetime: 29027 hours (1209 days + 11 hours)
  158. When the command that caused the error occurred, the device was active or idle.
  159.  
  160. After command completion occurred, registers were:
  161. ER ST SC SN CL CH DH
  162. -- -- -- -- -- -- --
  163. 10 51 04 e0 af 0c 00 Error: IDNF 4 sectors at LBA = 0x000cafe0 = 831456
  164.  
  165. Commands leading to the command that caused the error were:
  166. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  167. -- -- -- -- -- -- -- -- ---------------- --------------------
  168. 25 00 04 e0 af 0c e0 00 00:01:14.253 READ DMA EXT
  169. ef 03 46 00 00 00 a0 00 00:01:14.252 SET FEATURES [Set transfer mode]
  170. 25 00 08 a8 2a 0c 00 04 00:01:14.227 READ DMA EXT
  171. 25 00 08 a8 2a 0c e0 00 00:00:58.861 READ DMA EXT
  172. 25 00 08 e8 1c 24 e0 00 00:00:58.853 READ DMA EXT
  173.  
  174. Error 35 occurred at disk power-on lifetime: 29027 hours (1209 days + 11 hours)
  175. When the command that caused the error occurred, the device was active or idle.
  176.  
  177. After command completion occurred, registers were:
  178. ER ST SC SN CL CH DH
  179. -- -- -- -- -- -- --
  180. 10 51 08 a8 2a 0c 00 Error: IDNF 8 sectors at LBA = 0x000c2aa8 = 797352
  181.  
  182. Commands leading to the command that caused the error were:
  183. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  184. -- -- -- -- -- -- -- -- ---------------- --------------------
  185. 25 00 08 a8 2a 0c e0 00 00:00:58.861 READ DMA EXT
  186. 25 00 08 e8 1c 24 e0 00 00:00:58.853 READ DMA EXT
  187. ef 03 46 00 00 00 a0 00 00:00:58.851 SET FEATURES [Set transfer mode]
  188. 25 00 04 e0 af 0c 00 04 00:00:58.826 READ DMA EXT
  189. 25 00 04 e0 af 0c e0 00 00:00:43.515 READ DMA EXT
  190.  
  191. Error 34 occurred at disk power-on lifetime: 29027 hours (1209 days + 11 hours)
  192. When the command that caused the error occurred, the device was active or idle.
  193.  
  194. After command completion occurred, registers were:
  195. ER ST SC SN CL CH DH
  196. -- -- -- -- -- -- --
  197. 10 51 04 e0 af 0c 00 Error: IDNF 4 sectors at LBA = 0x000cafe0 = 831456
  198.  
  199. Commands leading to the command that caused the error were:
  200. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  201. -- -- -- -- -- -- -- -- ---------------- --------------------
  202. 25 00 04 e0 af 0c e0 00 00:00:43.515 READ DMA EXT
  203. 25 00 08 18 91 0c e0 00 00:00:43.505 READ DMA EXT
  204. e1 00 00 00 00 00 a0 00 00:00:43.482 IDLE IMMEDIATE
  205. 25 00 08 90 2a 0c e0 00 00:00:34.064 READ DMA EXT
  206. 25 00 08 40 91 0c e0 00 00:00:34.064 READ DMA EXT
  207.  
  208. SMART Extended Self-test Log (GP Log 0x07) not supported
  209.  
  210. SMART Self-test log structure revision number 1
  211. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  212. # 1 Extended offline Completed without error 00% 29067 -
  213. # 2 Extended offline Completed without error 00% 29005 -
  214. # 3 Extended offline Completed without error 00% 28962 -
  215. # 4 Short offline Completed without error 00% 28959 -
  216.  
  217. SMART Selective self-test log data structure revision number 1
  218. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  219. 1 0 0 Not_testing
  220. 2 0 0 Not_testing
  221. 3 0 0 Not_testing
  222. 4 0 0 Not_testing
  223. 5 0 0 Not_testing
  224. Selective self-test flags (0x0):
  225. After scanning selected spans, do NOT read-scan remainder of disk.
  226. If Selective self-test is pending on power-up, resume after 0 minute delay.
  227.  
  228. SCT Status Version: 3
  229. SCT Version (vendor specific): 256 (0x0100)
  230. SCT Support Level: 1
  231. Device State: Active (0)
  232. Current Temperature: 36 Celsius
  233. Power Cycle Min/Max Temperature: 22/38 Celsius
  234. Lifetime Min/Max Temperature: 6/49 Celsius
  235. Lifetime Average Temperature: 28 Celsius
  236. Under/Over Temperature Limit Count: 0/0
  237.  
  238. SCT Temperature History Version: 2
  239. Temperature Sampling Period: 1 minute
  240. Temperature Logging Interval: 1 minute
  241. Min/Max recommended Temperature: 0/60 Celsius
  242. Min/Max Temperature Limit: -40/65 Celsius
  243. Temperature History Size (Index): 128 (70)
  244.  
  245. Index Estimated Time Temperature Celsius
  246. 71 2019-02-23 17:54 37 ******************
  247. ... ..( 32 skipped). .. ******************
  248. 104 2019-02-23 18:27 37 ******************
  249. 105 2019-02-23 18:28 36 *****************
  250. 106 2019-02-23 18:29 37 ******************
  251. 107 2019-02-23 18:30 36 *****************
  252. 108 2019-02-23 18:31 37 ******************
  253. 109 2019-02-23 18:32 36 *****************
  254. 110 2019-02-23 18:33 37 ******************
  255. 111 2019-02-23 18:34 37 ******************
  256. 112 2019-02-23 18:35 36 *****************
  257. ... ..( 18 skipped). .. *****************
  258. 3 2019-02-23 18:54 36 *****************
  259. 4 2019-02-23 18:55 35 ****************
  260. 5 2019-02-23 18:56 36 *****************
  261. ... ..( 2 skipped). .. *****************
  262. 8 2019-02-23 18:59 36 *****************
  263. 9 2019-02-23 19:00 35 ****************
  264. 10 2019-02-23 19:01 36 *****************
  265. 11 2019-02-23 19:02 36 *****************
  266. 12 2019-02-23 19:03 35 ****************
  267. 13 2019-02-23 19:04 35 ****************
  268. 14 2019-02-23 19:05 36 *****************
  269. 15 2019-02-23 19:06 35 ****************
  270. 16 2019-02-23 19:07 35 ****************
  271. 17 2019-02-23 19:08 35 ****************
  272. 18 2019-02-23 19:09 36 *****************
  273. 19 2019-02-23 19:10 35 ****************
  274. ... ..( 26 skipped). .. ****************
  275. 46 2019-02-23 19:37 35 ****************
  276. 47 2019-02-23 19:38 36 *****************
  277. 48 2019-02-23 19:39 35 ****************
  278. ... ..( 8 skipped). .. ****************
  279. 57 2019-02-23 19:48 35 ****************
  280. 58 2019-02-23 19:49 36 *****************
  281. 59 2019-02-23 19:50 35 ****************
  282. ... ..( 9 skipped). .. ****************
  283. 69 2019-02-23 20:00 35 ****************
  284. 70 2019-02-23 20:01 36 *****************
  285.  
  286. Write SCT (Get) Error Recovery Control Command failed: Read of ATA output registers not implemented [JMicron]
  287. SCT (Get) Error Recovery Control command failed
  288.  
  289. Device Statistics (GP/SMART Log 0x04) not supported
  290.  
  291. ATA_READ_LOG_EXT (addr=0x11:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
  292. Read SATA Phy Event Counters failed
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!