dmesg

root@b8b85d8:~# dmesg
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[    0.000000] Linux version 4.19.66 (oe-user@oe-host) (gcc version 8.3.0 (GCC)) #1 SMP PREEMPT Wed Aug 28 16:57:11 UTC 2019
[    0.000000] Machine model: Raspberry Pi 4 Model B Rev 1.1
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: UEFI not found.
[    0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
[    0.000000] On node 0 totalpages: 517632
[    0.000000]   DMA32 zone: 4096 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 255488 pages, LIFO batch:63
[    0.000000]   Normal zone: 4096 pages used for memmap
[    0.000000]   Normal zone: 262144 pages, LIFO batch:63
[    0.000000] random: get_random_bytes called from start_kernel+0xa0/0x464 with crng_init=0
[    0.000000] percpu: Embedded 24 pages/cpu s57880 r8192 d32232 u98304
[    0.000000] pcpu-alloc: s57880 r8192 d32232 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Detected PIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for EL2 vector hardening
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 509440
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 cma=64M cma=256M  smsc95xx.macaddr=DC:A6:32:00:C7:42 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  dwc_otg.lpm_enable=0 console=tty1 console=ttyS0,115200 rootfstype=ext4 rootwait root=PARTUUID=002138c7-02 rootwait
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB: mapped [mem 0x3a5ff000-0x3e5ff000] (64MB)
[    0.000000] Memory: 1682052K/2070528K available (8828K kernel code, 1012K rwdata, 2856K rodata, 9920K init, 933K bss, 126332K reserved, 262144K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31455 entries in 123 pages
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[    0.000006] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[    0.000219] Console: colour dummy device 80x25
[    0.000568] console [tty1] enabled
[    0.000622] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[    0.000659] pid_max: default: 32768 minimum: 301
[    0.000932] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000973] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.024033] ASID allocator initialised with 32768 entries
[    0.032032] rcu: Hierarchical SRCU implementation.
[    0.040525] EFI services will not be available.
[    0.048087] smp: Bringing up secondary CPUs ...
[    0.080274] Detected PIPT I-cache on CPU1
[    0.080332] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[    0.112366] Detected PIPT I-cache on CPU2
[    0.112410] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[    0.144476] Detected PIPT I-cache on CPU3
[    0.144518] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[    0.144659] smp: Brought up 1 node, 4 CPUs
[    0.144744] SMP: Total of 4 processors activated.
[    0.144766] CPU features: detected: 32-bit EL0 Support
[    0.148681] CPU: All CPU(s) started at EL2
[    0.148734] alternatives: patching kernel code
[    0.149835] devtmpfs: initialized
[    0.157858] Enabled cp15_barrier support
[    0.157906] Enabled setend support
[    0.158278] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.158320] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.164871] pinctrl core: initialized pinctrl subsystem
[    0.165486] DMI not present or invalid.
[    0.165899] NET: Registered protocol family 16
[    0.167125] cpuidle: using governor menu
[    0.167440] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.167469] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.169820] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.169925] Serial: AMBA PL011 UART driver
[    0.173240] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[    0.205350] bcm2835-dma fe007000.dma: DMA legacy API manager at (____ptrval____), dmachans=0x1
[    0.207572] vgaarb: loaded
[    0.207887] SCSI subsystem initialized
[    0.208085] usbcore: registered new interface driver usbfs
[    0.208146] usbcore: registered new interface driver hub
[    0.208255] usbcore: registered new device driver usb
[    0.208333] pps_core: LinuxPPS API ver. 1 registered
[    0.208354] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.208390] PTP clock support registered
[    0.216883] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-07-09 14:38, variant start_cd
[    0.220766] raspberrypi-firmware soc:firmware: Firmware hash is d2b1b7fb01475cb3914b2086299e32d724e832f1
[    0.226068] clocksource: Switched to clocksource arch_sys_counter
[    0.301823] VFS: Disk quotas dquot_6.6.0
[    0.301932] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.302173] FS-Cache: Loaded
[    0.302358] CacheFiles: Loaded
[    0.310008] NET: Registered protocol family 2
[    0.310722] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.310772] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.310890] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.311177] TCP: Hash tables configured (established 16384 bind 16384)
[    0.311359] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.311404] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.311636] NET: Registered protocol family 1
[    0.316317] RPC: Registered named UNIX socket transport module.
[    0.316342] RPC: Registered udp transport module.
[    0.316360] RPC: Registered tcp transport module.
[    0.316378] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.316404] PCI: CLS 0 bytes, default 64
[    0.380000] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.381977] Initialise system trusted keyrings
[    0.382270] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[    0.389544] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.389602] FS-Cache: Netfs 'nfs' registered for caching
[    0.390396] NFS: Registering the id_resolver key type
[    0.390453] Key type id_resolver registered
[    0.390474] Key type id_legacy registered
[    0.390502] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.393266] Key type asymmetric registered
[    0.393294] Asymmetric key parser 'x509' registered
[    0.393351] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    0.393539] io scheduler noop registered
[    0.393562] io scheduler deadline registered
[    0.393710] io scheduler cfq registered (default)
[    0.393732] io scheduler mq-deadline registered
[    0.393751] io scheduler kyber registered
[    0.396780] brcm-pcie fd500000.pcie: could not get clock
[    0.396861] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[    0.396913] brcm-pcie fd500000.pcie:   MEM 0x600000000..0x603ffffff -> 0xf8000000
[    0.446107] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
[    0.446400] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[    0.446430] pci_bus 0000:00: root bus resource [bus 00-01]
[    0.446457] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
[    0.446521] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[    0.446675] pci 0000:00:00.0: PME# supported from D0 D3hot
[    0.449570] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    0.449747] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
[    0.449809] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
[    0.449984] pci 0000:01:00.0: PME# supported from D0 D3cold
[    0.452814] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
[    0.452865] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[    0.452899] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
[    0.452943] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.452971] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
[    0.453045] pci 0000:00:00.0: enabling device (0000 -> 0002)
[    0.453081] pci 0000:01:00.0: enabling device (0000 -> 0002)
[    0.454950] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.456674] iproc-rng200 fe104000.rng: hwrng registered
[    0.456979] vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
[    0.457681] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[    0.457994] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    0.467342] brd: module loaded
[    0.477071] loop: module loaded
[    0.477873] Loading iSCSI transport class v2.0-870.
[    0.479672] libphy: Fixed MDIO Bus: probed
[    0.479721] tun: Universal TUN/TAP device driver, 1.6
[    0.480329] bcmgenet fd580000.genet: failed to get enet clock
[    0.480359] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
[    0.480386] bcmgenet fd580000.genet: failed to get enet-wol clock
[    0.480413] bcmgenet fd580000.genet: failed to get enet-eee clock
[    0.480447] bcmgenet: Skipping UMAC reset
[    0.480670] unimac-mdio unimac-mdio.-19: DMA mask not set
[    0.490104] libphy: bcmgenet MII bus: probed
[    0.518693] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(____ptrval____)
[    0.519831] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.519881] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[    0.522684] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000001000000890
[    0.522877] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 44
[    0.523493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.523525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.523550] usb usb1: Product: xHCI Host Controller
[    0.523571] usb usb1: Manufacturer: Linux 4.19.66 xhci-hcd
[    0.523591] usb usb1: SerialNumber: 0000:01:00.0
[    0.524123] hub 1-0:1.0: USB hub found
[    0.524190] hub 1-0:1.0: 1 port detected
[    0.524609] xhci_hcd 0000:01:00.0: xHCI Host Controller
[    0.524642] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[    0.524675] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[    0.524990] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
[    0.525019] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.525043] usb usb2: Product: xHCI Host Controller
[    0.525063] usb usb2: Manufacturer: Linux 4.19.66 xhci-hcd
[    0.525083] usb usb2: SerialNumber: 0000:01:00.0
[    0.525568] hub 2-0:1.0: USB hub found
[    0.525634] hub 2-0:1.0: 4 ports detected
[    0.526439] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.526720] dwc_otg fe980000.usb: base=(____ptrval____)
[    0.729079] Core Release: 2.80a
[    0.729103] Setting default values for core params
[    0.729138] Finished setting default values for core params
[    0.858085] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.931861] Using Buffer DMA mode
[    0.931883] Periodic Transfer Interrupt Enhancement - disabled
[    0.931902] Multiprocessor Interrupt Enhancement - disabled
[    0.931922] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.931943] Dedicated Tx FIFOs mode
[    0.932243] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = ffffff8009ac2000 dma = 0x00000000ded34000 len=9024
[    0.932289] FIQ FSM acceleration enabled for :
               Non-periodic Split Transactions
               Periodic Split Transactions
               High-Speed Isochronous Endpoints
               Interrupt/Control Split Transaction hack enabled
[    0.932337] dwc_otg: Microframe scheduler enabled
[    0.932415] WARN::hcd_init_fiq:497: MPHI regs_base at ffffff80099f5200
[    0.932502] dwc_otg fe980000.usb: DWC OTG Controller
[    0.932538] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
[    0.932584] dwc_otg fe980000.usb: irq 25, io mem 0x00000000
[    0.932643] Init: Port Power? op_state=1
[    0.932660] Init: Power Port (0)
[    0.932923] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.932952] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.932976] usb usb3: Product: DWC OTG Controller
[    0.932997] usb usb3: Manufacturer: Linux 4.19.66 dwc_otg_hcd
[    0.933017] usb usb3: SerialNumber: fe980000.usb
[    0.933532] hub 3-0:1.0: USB hub found
[    0.933593] hub 3-0:1.0: 1 port detected
[    0.934301] dwc_otg: FIQ enabled
[    0.934310] dwc_otg: NAK holdoff enabled
[    0.934319] dwc_otg: FIQ split-transaction FSM enabled
[    0.934330] Module dwc_common_port init
[    0.934607] usbcore: registered new interface driver usb-storage
[    0.934801] mousedev: PS/2 mouse device common for all mice
[    0.936152] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[    0.936326] bcm2835-cpufreq: min=600000 max=1500000
[    0.937109] sdhci: Secure Digital Host Controller Interface driver
[    0.937131] sdhci: Copyright(c) Pierre Ossman
[    0.937531] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
[    0.937929] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.940547] ledtrig-cpu: registered to indicate activity on CPUs
[    0.940615] hidraw: raw HID events driver (C) Jiri Kosina
[    0.940685] usbcore: registered new interface driver usbhid
[    0.940694] usbhid: USB HID core driver
[    0.941259] Initializing XFRM netlink socket
[    0.941512] NET: Registered protocol family 10
[    0.942076] Segment Routing with IPv6
[    0.942133] NET: Registered protocol family 17
[    0.942160] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.942210] Key type dns_resolver registered
[    0.942612] registered taskstats version 1
[    0.942628] Loading compiled-in X.509 certificates
[    0.946084] uart-pl011 fe201000.serial: cts_event_workaround enabled
[    0.946162] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 19, base_baud = 0) is a PL011 rev2
[    0.948427] console [ttyS0] disabled
[    0.948451] fe215040.serial: ttyS0 at MMIO 0x0 (irq = 22, base_baud = 62500000) is a 16550
[    1.097145] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
[    1.097149] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.097153] usb 1-1: Product: USB2.0 Hub
[    1.125621] hub 1-1:1.0: USB hub found
[    1.130327] hub 1-1:1.0: 4 ports detected
[    2.241976] console [ttyS0] enabled
[    2.245744] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[    2.253680] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
[    2.261707] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    2.267829] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[    2.299581] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
[    2.327950] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.335175] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.340796] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
[    2.349841] of_cfs_init
[    2.349960] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.352400] of_cfs_init: OK
[    2.360676] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.367927] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.375230] Freeing unused kernel memory: 9920K
[    2.379925] Run /init as init process
[    2.413010] random: fast init done
[    2.440077] mmc1: new high speed SDIO card at address 0001
[    2.470160] mmc0: new ultra high speed DDR50 SDXC card at address 0001
[    2.477888] mmcblk0: mmc0:0001 FC8HT 59.6 GiB
[    2.484140]  mmcblk0: p1 p2 p3 p4 < p5 p6 >
[    2.877646] CP437: Invalid argument
[    2.919536] fsck.fat 4.1 (2017-01-24)
               0x41: Dirty bit is set. Fs was not properly unmounted and some data may be corrupt.
                Automatically removing dirty bit.
               Reclaimed 2 unused clusters (1024 bytes) in 1 chain.
               Performing changes.
               /dev/disk/by-label/resin-boot: 150 files, 15676/80628 clusters
[    2.958374] resin-rootA: recovering journal
[    3.023277] resin-rootA: clean, 5738/39936 files, 295065/319488 blocks

[    3.060055] resin-rootB: clean, 11/39936 files, 15349/319488 blocks

[    3.098585] resin-state: recovering journal
[    3.347304] resin-state: clean, 65/5136 files, 1901/20480 blocks

[    3.599670]  mmcblk0: p1 p2 p3 p4 < p5 p6 >
[    4.659443] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.699299] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[    4.998600] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.219700] systemd[1]: System time before build time, advancing clock.
[    5.240200] systemd[1]: systemd 241-9-gc1f8ff8+ running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[    5.263194] systemd[1]: Detected architecture arm64.
[    5.286336] systemd[1]: No hostname configured.
[    5.291097] systemd[1]: Set hostname to <localhost>.
[    5.300730] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
[    5.308278] systemd[1]: Hardware watchdog 'Broadcom BCM2835 Watchdog timer', version 0
[    5.316337] systemd[1]: Set hardware watchdog to 10s.
[    5.371981] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[    5.389339] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[    5.475395] systemd[1]: /lib/systemd/system/openvpn.service:11: PIDFile= references path below legacy directory /var/run/, updating /var/run/openvpn/openvpn.pid \xe2\x86\x92 /run/openvpn/openvpn.pid; please update the unit file accordingly.
[    5.563182] random: systemd: uninitialized urandom read (16 bytes read)
[    5.569994] random: systemd: uninitialized urandom read (16 bytes read)
[    5.581482] random: systemd: uninitialized urandom read (16 bytes read)
[    8.163409] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
[    9.283847] vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    9.310725] vchiq: vchiq_init_state: slot_zero = (____ptrval____), is_master = 0
[    9.373153] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[    9.397358] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[    9.432213] bcm2835_audio soc:audio: card created with 8 channels
[    9.465341] [drm] No displays found. Consider forcing hotplug if HDMI is attached
[    9.480834] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
[    9.492365] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
[    9.498903] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    9.501497] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    9.517691] [drm] No driver support for vblank timestamp query.
[    9.524405] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
[    9.542004] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[    9.561057] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[    9.568019] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    9.571824] media: Linux media interface: v0.10
[    9.573872] [vc_sm_connected_init]: start
[    9.578722] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    9.580846] vc_sm_cma_vchi_init: failed to open VCHI service (-1)
[    9.584472] cfg80211: failed to load regulatory.db
[    9.600139] [vc_sm_connected_init]: failed to initialize shared memory service
[    9.630385] videodev: Linux video capture interface: v2.00
[    9.654622] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[    9.672280] brcmfmac: F1 signature read @0x18000000=0x15264345
[    9.674254] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[    9.686743] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    9.696433] bcm2835_mmal_vchiq: Failed to open VCHI service connection (status=-1)
[    9.705634] usbcore: registered new interface driver brcmfmac
[    9.896140] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    9.914685] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
[   10.403066] uart-pl011 fe201000.serial: no DMA platform data
[   11.684028] random: crng init done
[   11.687492] random: 7 urandom warning(s) missed due to ratelimiting
[   12.106692] i2c /dev entries driver
[   12.588881] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.595153] bcmgenet: Skipping UMAC reset
[   12.670753] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
[   12.679456] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.699821] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.732943] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   12.739111] brcmfmac: power management disabled
[   13.283339] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.289470] brcmfmac: power management disabled
[   13.527330] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   13.694379] bcmgenet fd580000.genet eth0: Link is Down
[   13.918984] Bridge firewalling registered
[   14.227751] IPv6: ADDRCONF(NETDEV_UP): br-cc962dfccc24: link is not ready
[   14.347897] IPv6: ADDRCONF(NETDEV_UP): balena0: link is not ready
[   14.466649] IPv6: ADDRCONF(NETDEV_UP): supervisor0: link is not ready
[   16.684053] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   16.690121] brcmfmac: power management disabled
[   17.046963] Bluetooth: Core ver 2.22
[   17.051733] NET: Registered protocol family 31
[   17.056368] Bluetooth: HCI device and connection manager initialized
[   17.062912] Bluetooth: HCI socket layer initialized
[   17.067988] Bluetooth: L2CAP socket layer initialized
[   17.073204] Bluetooth: SCO socket layer initialized
[   17.093041] Bluetooth: HCI UART driver ver 2.3
[   17.097688] Bluetooth: HCI UART protocol H4 registered
[   17.103528] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   17.110673] Bluetooth: HCI UART protocol Broadcom registered
[   17.310812] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   17.316429] Bluetooth: BNEP filters: protocol multicast
[   17.325452] Bluetooth: BNEP socket layer initialized
[   22.032615] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready