SHARE
TWEET

bionic-minimal 0.6.51 with pcie nvme card and samsung m.2

Bullet64 Jun 10th, 2018 222 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.06.10 13:43:06 =~=~=~=~=~=~=~=~=~=~=~=
  2. DDR Version 1.11 20180509
  3. In
  4. Channel 0: LPDDR4,50MHz
  5. CS = 0
  6. MR0=0x98
  7. MR4=0x3
  8. MR5=0xFF
  9. MR8=0x8
  10. MR12=0x4D
  11. MR14=0x4D
  12. MR18=0x0
  13. MR19=0x0
  14. MR24=0x8
  15. MR25=0x0
  16. CS = 1
  17. MR0=0x18
  18. MR4=0x3
  19. MR5=0xFF
  20. MR8=0x8
  21. MR12=0x4D
  22. MR14=0x4D
  23. MR18=0x0
  24. MR19=0x0
  25. MR24=0x8
  26. MR25=0x0
  27. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  28. Channel 1: LPDDR4,50MHz
  29. CS = 0
  30. MR0=0x98
  31. MR4=0x3
  32. MR5=0xFF
  33. MR8=0x8
  34. MR12=0x4D
  35. MR14=0x4D
  36. MR18=0x0
  37. MR19=0x0
  38. MR24=0x8
  39. MR25=0x0
  40. CS = 1
  41. MR0=0x18
  42. MR4=0x3
  43. MR5=0xFF
  44. MR8=0x8
  45. MR12=0x4D
  46. MR14=0x4D
  47. MR18=0x0
  48. MR19=0x0
  49. MR24=0x8
  50. MR25=0x0
  51. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  52. 256B stride
  53. channel 0
  54. CS = 0
  55. MR0=0x98
  56. MR4=0x3
  57. MR5=0xFF
  58. MR8=0x8
  59. MR12=0x72
  60. MR14=0x72
  61. MR18=0x0
  62. MR19=0x0
  63. MR24=0x8
  64. MR25=0x0
  65. CS = 1
  66. MR0=0x18
  67. MR4=0x82
  68. MR5=0xFF
  69. MR8=0x8
  70. MR12=0x72
  71. MR14=0x72
  72. MR18=0x0
  73. MR19=0x0
  74. MR24=0x8
  75. MR25=0x0
  76. channel 1
  77. CS = 0
  78. MR0=0x98
  79. MR4=0x82
  80. MR5=0xFF
  81. MR8=0x8
  82. MR12=0x72
  83. MR14=0x72
  84. MR18=0x0
  85. MR19=0x0
  86. MR24=0x8
  87. MR25=0x0
  88. CS = 1
  89. MR0=0x18
  90. MR4=0x82
  91. MR5=0xFF
  92. MR8=0x8
  93. MR12=0x72
  94. MR14=0x72
  95. MR18=0x0
  96. MR19=0x0
  97. MR24=0x8
  98. MR25=0x0
  99. channel 0 training pass!
  100. channel 1 training pass!
  101. change freq to 400MHz 0,1
  102. channel 0
  103. CS = 0
  104. MR0=0x98
  105. MR4=0x82
  106. MR5=0xFF
  107. MR8=0x8
  108. MR12=0x72
  109. MR14=0x72
  110. MR18=0x0
  111. MR19=0x0
  112. MR24=0x8
  113. MR25=0x0
  114. CS = 1
  115. MR0=0x18
  116. MR4=0x2
  117. MR5=0xFF
  118. MR8=0x8
  119. MR12=0x72
  120. MR14=0x72
  121. MR18=0x0
  122. MR19=0x0
  123. MR24=0x8
  124. MR25=0x0
  125. channel 1
  126. CS = 0
  127. MR0=0x98
  128. MR4=0x2
  129. MR5=0xFF
  130. MR8=0x8
  131. MR12=0x72
  132. MR14=0x72
  133. MR18=0x0
  134. MR19=0x0
  135. MR24=0x8
  136. MR25=0x0
  137. CS = 1
  138. MR0=0x18
  139. MR4=0x2
  140. MR5=0xFF
  141. MR8=0x8
  142. MR12=0x72
  143. MR14=0x72
  144. MR18=0x0
  145. MR19=0x0
  146. MR24=0x8
  147. MR25=0x0
  148. channel 0 training pass!
  149. channel 1 training pass!
  150. change freq to 800MHz 1,0
  151. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  152. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  153. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  154. OUT
  155. U-Boot SPL board init
  156.  
  157. U-Boot SPL 2017.09-gec1524d (Jun 03 2018 - 14:57:02)
  158. booted from SD
  159. Trying to boot from MMC2
  160. NOTICE:  BL31: v1.3(debug):d98d16e
  161. NOTICE:  BL31: Built : 15:03:07, May 10 2018
  162. NOTICE:  BL31: Rockchip release version: v1.1
  163. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  164. INFO:    Using opteed sec cpu_context!
  165. INFO:    boot cpu mask: 0
  166. INFO:    plat_rockchip_pmu_init(1151): pd status 3e
  167. INFO:    BL31: Initializing runtime services
  168. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  169. ERROR:   Error initializing runtime service opteed_fast
  170. INFO:    BL31: Preparing for EL3 exit to normal world
  171. INFO:    Entry point address = 0x200000
  172. INFO:    SPSR = 0x3c9
  173.  
  174.  
  175. U-Boot 2017.09-gec1524d (Jun 03 2018 - 14:57:16 +0000), Build: jenkins-linux-build-rock-64-249
  176.  
  177. Model: Pine64 RockPro64
  178. DRAM:  3.9 GiB
  179. MMC:   sdhci@fe330000: 0, dwmmc@fe320000: 1
  180. Card did not respond to voltage select!
  181. mmc_init: -95, time 21
  182. *** Warning - No block device, using default environment
  183.  
  184. In:    serial@ff1a0000
  185. Out:   serial@ff1a0000
  186. Err:   serial@ff1a0000
  187. Model: Pine64 RockPro64
  188. Net:   eth0: ethernet@fe300000
  189. Hit any key to stop autoboot:  0
  190. Card did not respond to voltage select!
  191. mmc_init: -95, time 21
  192. switch to partitions #0, OK
  193. mmc1 is current device
  194. Scanning mmc 1:6...
  195. Found /extlinux/extlinux.conf
  196. Retrieving file: /extlinux/extlinux.conf
  197. reading /extlinux/extlinux.conf
  198. 688 bytes read in 3 ms (223.6 KiB/s)
  199. select kernel
  200. 1:  kernel-latest
  201. 2:  kernel-previous
  202. Enter choice: 1:    kernel-latest
  203. Retrieving file: /initrd.img
  204. reading /initrd.img
  205. 5673127 bytes read in 243 ms (22.3 MiB/s)
  206. Retrieving file: /Image
  207. reading /Image
  208. 28066304 bytes read in 1194 ms (22.4 MiB/s)
  209. append: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  210. Retrieving file: /dtb
  211. reading /dtb
  212. 53003 bytes read in 5 ms (10.1 MiB/s)
  213. ## Flattened Device Tree blob at 01f00000
  214.    Booting using the fdt blob at 0x1f00000
  215.    Loading Ramdisk to f599b000, end f5f040a7 ... OK
  216.    Loading Device Tree to 00000000f598b000, end 00000000f599af0a ... OK
  217.  
  218. Starting kernel ...
  219.  
  220. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  221. [    0.000000] Linux version 4.17.0-rc6-1017-ayufan-g53b5bbc73a0e (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.2.0 (Ubuntu/Linaro 7.2.0-6ubuntu1)) #1 SMP PREEMPT Sun Jun 10 10:44:37 UTC 2018
  222. [    0.000000] Machine model: Pine64 RockPro64
  223. [    0.000000] efi: Getting EFI parameters from FDT:
  224. [    0.000000] efi: UEFI not found.
  225. [    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
  226. [    0.000000] NUMA: No NUMA configuration found
  227. [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff]
  228. [    0.000000] NUMA: NODE_DATA [mem 0xf6fa9780-0xf6fab27f]
  229. [    0.000000] Zone ranges:
  230. [    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
  231. [    0.000000]   Normal   empty
  232. [    0.000000] Movable zone start for each node
  233. [    0.000000] Early memory node ranges
  234. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
  235. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  236. [    0.000000] psci: probing for conduit method from DT.
  237. [    0.000000] psci: PSCIv1.0 detected in firmware.
  238. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  239. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  240. [    0.000000] psci: SMC Calling Convention v1.0
  241. [    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x420 with crng_init=0
  242. [    0.000000] percpu: Embedded 24 pages/cpu @        (ptrval) s58008 r8192 d32104 u98304
  243. [    0.000000] Detected VIPT I-cache on CPU0
  244. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  245. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  246. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
  247. [    0.000000] Policy zone: DMA32
  248. [    0.000000] Kernel command line: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  249. [    0.000000] Memory: 3944796K/4061184K available (17212K kernel code, 1744K rwdata, 7092K rodata, 1280K init, 486K bss, 100004K reserved, 16384K cma-reserved)
  250. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  251. [    0.000000] Preemptible hierarchical RCU implementation.
  252. [    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  253. [    0.000000]  Tasks RCU enabled.
  254. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  255. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  256. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  257. [    0.000000] GICv3: Distributor has no Range Selector support
  258. [    0.000000] GICv3: no VLPI support, no direct LPI support
  259. [    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  260. [    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0)
  261. [    0.000000] ITS: using cache flushing for cmd queue
  262. [    0.000000] GIC: using LPI property table @0x00000000f2040000
  263. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  264. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  265. [    0.000000] CPU0: using LPI pending table @0x00000000f2050000
  266. [    0.000000] GIC: using cache flushing for LPI property table
  267. [    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  268. [    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  269. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  270. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  271. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  272. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  273. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  274. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  275. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  276. [    0.001636] Console: colour dummy device 80x25
  277. [    0.002522] console [tty0] enabled
  278. [    0.002606] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  279. [    0.002645] pid_max: default: 32768 minimum: 301
  280. [    0.002766] Security Framework initialized
  281. [    0.004830] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  282. [    0.005845] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  283. [    0.005937] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  284. [    0.005994] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  285. [    0.023838] ASID allocator initialised with 32768 entries
  286. [    0.027841] Hierarchical SRCU implementation.
  287. [    0.031948] Platform MSI: interrupt-controller@fee20000 domain created
  288. [    0.032338] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  289. [    0.036472] EFI services will not be available.
  290. [    0.040384] smp: Bringing up secondary CPUs ...
  291. [    0.060549] Detected VIPT I-cache on CPU1
  292. [    0.060588] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  293. [    0.060631] CPU1: using LPI pending table @0x00000000f1440000
  294. [    0.060678] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  295. [    0.080596] Detected VIPT I-cache on CPU2
  296. [    0.080625] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  297. [    0.080665] CPU2: using LPI pending table @0x00000000f1460000
  298. [    0.080699] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  299. [    0.100668] Detected VIPT I-cache on CPU3
  300. [    0.100695] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  301. [    0.100734] CPU3: using LPI pending table @0x00000000f14a0000
  302. [    0.100766] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  303. [    0.123394] CPU features: enabling workaround for EL2 vector hardening
  304. [    0.123739] Detected PIPT I-cache on CPU4
  305. [    0.124998] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  306. [    0.127471] CPU4: using LPI pending table @0x00000000f14d0000
  307. [    0.128688] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  308. [    0.154888] Detected PIPT I-cache on CPU5
  309. [    0.156068] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  310. [    0.158502] CPU5: using LPI pending table @0x00000000f14e0000
  311. [    0.159607] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  312. [    0.163422] smp: Brought up 1 node, 6 CPUs
  313. [    0.163820] SMP: Total of 6 processors activated.
  314. [    0.163854] CPU features: detected: GIC system register CPU interface
  315. [    0.163883] CPU features: detected: 32-bit EL0 Support
  316. [    0.172789] CPU: All CPU(s) started at EL2
  317. [    0.173264] alternatives: patching kernel code
  318. [    0.178721] devtmpfs: initialized
  319. [    0.194635] Built 1 zonelists, mobility grouping on.  Total pages: 990295
  320. [    0.194760] Policy zone: DMA32
  321. [    0.198841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  322. [    0.199094] futex hash table entries: 2048 (order: 6, 262144 bytes)
  323. [    0.199776] xor: measuring software checksum speed
  324. [    0.239525]    8regs     :  1151.000 MB/sec
  325. [    0.279756]    8regs_prefetch:  1026.000 MB/sec
  326. [    0.319984]    32regs    :  1416.000 MB/sec
  327. [    0.360198]    32regs_prefetch:  1190.000 MB/sec
  328. [    0.360219] xor: using function: 32regs (1416.000 MB/sec)
  329. [    0.360257] pinctrl core: initialized pinctrl subsystem
  330. [    0.363769] DMI not present or invalid.
  331. [    0.365456] NET: Registered protocol family 16
  332. [    0.369793] audit: initializing netlink subsys (disabled)
  333. [    0.370429] audit: type=2000 audit(0.360:1): state=initialized audit_enabled=0 res=1
  334. [    0.378384] cpuidle: using governor menu
  335. [    0.379650] vdso: 2 pages (1 code @         (ptrval), 1 data @         (ptrval))
  336. [    0.379847] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  337. [    0.384586] DMA: preallocated 1024 KiB pool for atomic allocations
  338. [    0.387614] Serial: AMBA PL011 UART driver
  339. [    0.505597] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  340. [    0.509711] cryptd: max_cpu_qlen set to 1000
  341. [    0.583633] raid6: int64x1  gen()   219 MB/s
  342. [    0.652481] raid6: int64x1  xor()   220 MB/s
  343. [    0.724474] raid6: int64x2  gen()     8 MB/s
  344. [    0.792525] raid6: int64x2  xor()   299 MB/s
  345. [    0.861191] raid6: int64x4  gen()   519 MB/s
  346. [    0.929301] raid6: int64x4  xor()   383 MB/s
  347. [    0.997650] raid6: int64x8  gen()   492 MB/s
  348. [    1.066020] raid6: int64x8  xor()   376 MB/s
  349. [    1.134433] raid6: neonx1   gen()   364 MB/s
  350. [    1.202804] raid6: neonx1   xor()   425 MB/s
  351. [    1.271171] raid6: neonx2   gen()   583 MB/s
  352. [    1.339538] raid6: neonx2   xor()   603 MB/s
  353. [    1.407966] raid6: neonx4   gen()   756 MB/s
  354. [    1.476269] raid6: neonx4   xor()   722 MB/s
  355. [    1.544661] raid6: neonx8   gen()   828 MB/s
  356. [    1.613019] raid6: neonx8   xor()   766 MB/s
  357. [    1.613038] raid6: using algorithm neonx8 gen() 828 MB/s
  358. [    1.613057] raid6: .... xor() 766 MB/s, rmw enabled
  359. [    1.613081] raid6: using neon recovery algorithm
  360. [    1.614472] ACPI: Interpreter disabled.
  361. [    1.618796] vcc3v3_pcie: supplied by dc_12v
  362. [    1.620995] vcc_sys: supplied by dc_12v
  363. [    1.623236] rk_iommu ff8f3f00.iommu: Failed to get clk 'iface': -2
  364. [    1.624021] rk_iommu ff903f00.iommu: Failed to get clk 'iface': -2
  365. [    1.625188] vgaarb: loaded
  366. [    1.626528] SCSI subsystem initialized
  367. [    1.628519] usbcore: registered new interface driver usbfs
  368. [    1.628717] usbcore: registered new interface driver hub
  369. [    1.629016] usbcore: registered new device driver usb
  370. [    1.631608] media: Linux media interface: v0.10
  371. [    1.631833] Linux video capture interface: v2.00
  372. [    1.632164] pps_core: LinuxPPS API ver. 1 registered
  373. [    1.632201] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  374. [    1.632257] PTP clock support registered
  375. [    1.632591] EDAC MC: Ver: 3.0.0
  376. [    1.636084] Advanced Linux Sound Architecture Driver Initialized.
  377. [    1.637306] Bluetooth: Core ver 2.22
  378. [    1.637527] NET: Registered protocol family 31
  379. [    1.637549] Bluetooth: HCI device and connection manager initialized
  380. [    1.637585] Bluetooth: HCI socket layer initialized
  381. [    1.637608] Bluetooth: L2CAP socket layer initialized
  382. [    1.637682] Bluetooth: SCO socket layer initialized
  383. [    1.637733] NetLabel: Initializing
  384. [    1.637750] NetLabel:  domain hash size = 128
  385. [    1.637767] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  386. [    1.637880] NetLabel:  unlabeled traffic allowed by default
  387. [    1.641574] clocksource: Switched to clocksource arch_sys_counter
  388. [    1.642370] VFS: Disk quotas dquot_6.6.0
  389. [    1.642484] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  390. [    1.642828] pnp: PnP ACPI: disabled
  391. [    1.660003] NET: Registered protocol family 2
  392. [    1.662467] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  393. [    1.662778] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  394. [    1.663374] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  395. [    1.664157] TCP: Hash tables configured (established 32768 bind 32768)
  396. [    1.664663] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  397. [    1.664908] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  398. [    1.666863] NET: Registered protocol family 1
  399. [    1.669780] RPC: Registered named UNIX socket transport module.
  400. [    1.669819] RPC: Registered udp transport module.
  401. [    1.669837] RPC: Registered tcp transport module.
  402. [    1.669855] RPC: Registered tcp NFSv4.1 backchannel transport module.
  403. [    1.672335] Trying to unpack rootfs image as initramfs...
  404. [    2.123829] Freeing initrd memory: 5540K
  405. [    2.133362] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters availabld
  406. [    2.136781] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  407. [    2.137941] kvm [1]: 8-bit VMID
  408. [    2.140282] kvm [1]: vgic-v2@fff20000
  409. [    2.140308] kvm [1]: GIC system register CPU interface enabled
  410. [    2.143261] kvm [1]: vgic interrupt IRQ10
  411. [    2.145047] kvm [1]: Hyp mode initialized successfully
  412. [    2.168769] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  413. [    2.188698] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  414. [    2.190905] NFS: Registering the id_resolver key type
  415. [    2.191141] Key type id_resolver registered
  416. [    2.191169] Key type id_legacy registered
  417. [    2.191198] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  418. [    2.191220] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  419. [    2.193737] fuse init (API version 7.26)
  420. [    2.195143] 9p: Installing v9fs 9p2000 file system support
  421. [    2.195438] pstore: using deflate compression
  422. [    2.266759] NET: Registered protocol family 38
  423. [    2.267264] Key type asymmetric registered
  424. [    2.267289] Asymmetric key parser 'x509' registered
  425. [    2.268065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  426. [    2.268910] io scheduler noop registered
  427. [    2.269739] io scheduler cfq registered (default)
  428. [    2.269773] io scheduler mq-deadline registered
  429. [    2.269793] io scheduler kyber registered
  430. [    2.279952] vcc5v0_host: supplied by vcc_sys
  431. [    2.323861] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  432. [    2.324295] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  433. [    2.329139] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  434. [    2.329961] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  435. [    2.339666] pwm-regulator: supplied by regulator-dummy
  436. [    2.340629] vcc3v3_sys: supplied by vcc_sys
  437. [    2.351888] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  438. [    2.356743] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  439. [    2.359491] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  440. [    2.469168] console [ttyS2] enabled
  441. [    2.473640] SuperH (H)SCI(F) driver initialized
  442. [    2.475434] msm_serial: driver initialized
  443. [    2.498038] cacheinfo: Unable to detect cache hierarchy for CPU 0
  444. [    2.523350] brd: module loaded
  445. [    2.539200] loop: module loaded
  446. [    2.596980] libphy: Fixed MDIO Bus: probed
  447. [    2.599236] tun: Universal TUN/TAP device driver, 1.6
  448. [    2.604779] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  449. [    2.606592] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  450. [    2.607542] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  451. [    2.608178] igb: Copyright (c) 2007-2014 Intel Corporation.
  452. [    2.608759] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  453. [    2.609773] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  454. [    2.611473] sky2: driver version 1.30
  455. [    2.615584] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  456. [    2.615694] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  457. [    2.617108] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  458. [    2.617843] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  459. [    2.618361] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  460. [    2.618881] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  461. [    2.619484] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  462. [    2.625049] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  463. [    2.627069] stmmac - user ID: 0x10, Synopsys ID: 0x35
  464. [    2.627537] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  465. [    2.628070] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  466. [    2.628747] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  467. [    2.629435] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  468. [    2.630114] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  469. [    2.630590] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  470. [    2.631236] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  471. [    2.900137] libphy: stmmac: probed
  472. [    2.900549] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  473. [    2.901731] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  474. [    2.906128] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  475. [    2.906975] usbcore: registered new interface driver pegasus
  476. [    2.907554] usbcore: registered new interface driver rtl8150
  477. [    2.908177] usbcore: registered new interface driver r8152
  478. [    2.908752] usbcore: registered new interface driver asix
  479. [    2.909458] usbcore: registered new interface driver ax88179_178a
  480. [    2.910156] usbcore: registered new interface driver cdc_ether
  481. [    2.910755] usbcore: registered new interface driver dm9601
  482. [    2.911319] usbcore: registered new interface driver CoreChips
  483. [    2.911925] usbcore: registered new interface driver smsc75xx
  484. [    2.912513] usbcore: registered new interface driver smsc95xx
  485. [    2.913101] usbcore: registered new interface driver net1080
  486. [    2.913727] usbcore: registered new interface driver plusb
  487. [    2.914281] usbcore: registered new interface driver cdc_subset
  488. [    2.914885] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  489. [    2.915674] usbcore: registered new interface driver cdc_ncm
  490. [    2.916909] VFIO - User Level meta-driver version: 0.3
  491. [    2.935595] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  492. [    2.936284] ehci-pci: EHCI PCI platform driver
  493. [    2.936756] ehci-platform: EHCI generic platform driver
  494. [    2.940133] ehci-platform fe380000.usb: EHCI Host Controller
  495. [    2.940687] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  496. [    2.942283] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  497. [    2.957425] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  498. [    2.959497] hub 1-0:1.0: USB hub found
  499. [    2.959913] hub 1-0:1.0: 1 port detected
  500. [    2.963172] ehci-platform fe3c0000.usb: EHCI Host Controller
  501. [    2.963731] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  502. [    2.965301] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  503. [    2.981332] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  504. [    2.983109] hub 2-0:1.0: USB hub found
  505. [    2.983507] hub 2-0:1.0: 1 port detected
  506. [    2.984795] ehci-orion: EHCI orion driver
  507. [    2.985839] ehci-exynos: EHCI EXYNOS driver
  508. [    2.986488] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  509. [    2.987191] ohci-pci: OHCI PCI platform driver
  510. [    2.987711] ohci-platform: OHCI generic platform driver
  511. [    2.988536] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  512. [    2.989324] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  513. [    2.990568] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  514. [    3.054594] hub 3-0:1.0: USB hub found
  515. [    3.054997] hub 3-0:1.0: 1 port detected
  516. [    3.056208] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  517. [    3.056847] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  518. [    3.058203] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  519. [    3.122456] hub 4-0:1.0: USB hub found
  520. [    3.122882] hub 4-0:1.0: 1 port detected
  521. [    3.124078] ohci-exynos: OHCI EXYNOS driver
  522. [    3.126216] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  523. [    3.126763] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  524. [    3.128667] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02010010
  525. [    3.129558] xhci-hcd xhci-hcd.0.auto: irq 218, io mem 0xfe800000
  526. [    3.131890] hub 5-0:1.0: USB hub found
  527. [    3.132290] hub 5-0:1.0: 1 port detected
  528. [    3.133461] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  529. [    3.133980] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  530. [    3.134686] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
  531. [    3.135386] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  532. [    3.137327] hub 6-0:1.0: USB hub found
  533. [    3.137722] hub 6-0:1.0: 1 port detected
  534. [    3.138886] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  535. [    3.139414] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  536. [    3.141621] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02010010
  537. [    3.142504] xhci-hcd xhci-hcd.1.auto: irq 219, io mem 0xfe900000
  538. [    3.144619] hub 7-0:1.0: USB hub found
  539. [    3.145021] hub 7-0:1.0: 1 port detected
  540. [    3.145987] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  541. [    3.146511] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  542. [    3.147220] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
  543. [    3.147903] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  544. [    3.149903] hub 8-0:1.0: USB hub found
  545. [    3.150304] hub 8-0:1.0: 1 port detected
  546. [    3.151909] usbcore: registered new interface driver usb-storage
  547. [    3.161178] i2c /dev entries driver
  548. [    3.166473] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at         (ptrval)
  549. [    3.168844] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at         (ptrval)
  550. [    3.171468] rk808 0-001b: chip id: 0x0
  551. [    3.177699] rk808-regulator rk808-regulator: there is no dvs0 gpio
  552. [    3.178366] rk808-regulator rk808-regulator: there is no dvs1 gpio
  553. [    3.179071] DCDC_REG1: supplied by vcc_sys
  554. [    3.180575] DCDC_REG2: supplied by vcc_sys
  555. [    3.181712] DCDC_REG3: supplied by vcc_sys
  556. [    3.182360] DCDC_REG4: supplied by vcc_sys
  557. [    3.183372] LDO_REG1: supplied by vcc_sys
  558. [    3.184980] LDO_REG2: supplied by vcc_sys
  559. [    3.187015] LDO_REG3: supplied by vcc_sys
  560. [    3.188571] LDO_REG4: supplied by vcc_sys
  561. [    3.190286] LDO_REG5: supplied by vcc_sys
  562. [    3.191637] LDO_REG6: supplied by vcc_sys
  563. [    3.193230] LDO_REG7: supplied by vcc_sys
  564. [    3.194563] LDO_REG8: supplied by vcc_sys
  565. [    3.196079] SWITCH_REG1: supplied by vcc3v3_sys
  566. [    3.196950] SWITCH_REG2: supplied by vcc3v3_sys
  567. [    3.202356] rk808-rtc rk808-rtc: registered as rtc0
  568. [    3.203868] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  569. [    3.204539] fan53555-reg: supplied by vcc_sys
  570. [    3.206796] vcc1v8_s3: supplied by vcc_1v8
  571. [    3.208096] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
  572. [    3.208809] fan53555-reg: supplied by vcc_sys
  573. [    3.210179] random: fast init done
  574. [    3.211256] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at         (ptrval)
  575. [    3.213534] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at         (ptrval)
  576. [    3.219673] rockchip-rga ff680000.rga: HW Version: 0x03.02
  577. [    3.221888] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  578. [    3.234125] Bluetooth: HCI UART driver ver 2.3
  579. [    3.239267] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  580. [    3.240168] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  581. [    3.242136] sdhci: Secure Digital Host Controller Interface driver
  582. [    3.242694] sdhci: Copyright(c) Pierre Ossman
  583. [    3.243338] Synopsys Designware Multimedia Card Interface Driver
  584. [    3.244865] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  585. [    3.245622] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  586. [    3.246227] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  587. [    3.246778] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  588. [    3.247720] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  589. [    3.261400] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  590. [    3.276524] sdhci-pltfm: SDHCI platform and OF driver helper
  591. [    3.279002] mmc1: CQHCI version 5.10
  592. [    3.302921] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  593. [    3.308094] ledtrig-cpu: registered to indicate activity on CPUs
  594. [    3.310213] usbcore: registered new interface driver usbhid
  595. [    3.310740] usbhid: USB HID core driver
  596. [    3.320540] xt_time: kernel timezone is -0000
  597. [    3.320963] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  598. [    3.321856] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  599. [    3.322620] IPVS: ipvs loaded.
  600. [    3.322897] IPVS: [rr] scheduler registered.
  601. [    3.323275] IPVS: [wrr] scheduler registered.
  602. [    3.323661] IPVS: [lc] scheduler registered.
  603. [    3.324038] IPVS: [wlc] scheduler registered.
  604. [    3.324424] IPVS: [fo] scheduler registered.
  605. [    3.324802] IPVS: [ovf] scheduler registered.
  606. [    3.325280] IPVS: [lblc] scheduler registered.
  607. [    3.325679] IPVS: [lblcr] scheduler registered.
  608. [    3.326080] IPVS: [dh] scheduler registered.
  609. [    3.326458] IPVS: [sh] scheduler registered.
  610. [    3.326835] IPVS: [sed] scheduler registered.
  611. [    3.327221] IPVS: [nq] scheduler registered.
  612. [    3.327863] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  613. [    3.328481] Initializing XFRM netlink socket
  614. [    3.329235] NET: Registered protocol family 10
  615. [    3.330282] Segment Routing with IPv6
  616. [    3.330833] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  617. [    3.331721] NET: Registered protocol family 17
  618. [    3.332148] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  619. [    3.333383] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  620. [    3.333911] Bluetooth: HIDP socket layer initialized
  621. [    3.334393] 8021q: 802.1Q VLAN Support v1.8
  622. [    3.334792] 9pnet: Installing 9P2000 support
  623. [    3.335224] Key type dns_resolver registered
  624. [    3.336357] registered taskstats version 1
  625. [    3.337577] Btrfs loaded, crc32c=crc32c-generic
  626. [    3.342143] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  627. [    3.343146] mmc0: new high speed SDHC card at address aaaa
  628. [    3.344526] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  629. [    3.351991]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
  630. [    3.357842] rk808-rtc rk808-rtc: setting system clock to 2018-06-10 11:43:16 UTC (1528630996)
  631. [    3.358613] of_cfs_init
  632. [    3.358898] of_cfs_init: OK
  633. [    3.359645] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  634. [    3.359754] vcc3v3_pcie: disabling
  635. [    3.360409] cfg80211: failed to load regulatory.db
  636. [    3.360723] ALSA device list:
  637. [    3.361418]   No soundcards found.
  638. [    3.361887] ttyS2 - failed to request DMA
  639. [    3.362681] Freeing unused kernel memory: 1280K
  640. Loading, please wait...
  641. starting version 237
  642. [    3.667027] iommu: Adding device ff8f0000.vop to group 0
  643. [    3.667641] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  644. [    3.669732] iommu: Adding device ff900000.vop to group 1
  645. [    3.670354] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  646. [    3.677526] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  647. [    3.678223] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  648. [    3.679352] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  649. [    3.682296] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  650. [    3.684995] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  651. [    3.686181] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  652. [    3.689548] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  653. [    3.690367] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  654. [    3.690402] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  655. [    3.691031] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  656. [    3.691546] [drm] No driver support for vblank timestamp query.
  657. [    3.692132] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  658. [    3.761097] Console: switching to colour frame buffer device 240x67
  659. [    3.761584] PCI: OF: host bridge /pcie@f8000000 ranges:
  660. [    3.761602] PCI: OF:   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  661. [    3.761608] PCI: OF:    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  662. [    3.761870] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  663. [    3.761878] pci_bus 0000:00: root bus resource [bus 00-1f]
  664. [    3.761883] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  665. [    3.761888] pci_bus 0000:00: root bus resource [io  0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  666. [    3.765144] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  667. [    3.767929] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 256)
  668. [    3.805710] rockchip-drm display-subsystem: fb0:  frame buffer device
  669. [    3.823329] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
  670. [    3.824133] Modules linked in: phy_rockchip_pcie rockchipdrm(+) analogix_dp
  671. [    3.824867] CPU: 1 PID: 60 Comm: kworker/1:1 Not tainted 4.17.0-rc6-1017-ayufan-g53b5bbc73a0e #1
  672. [    3.825770] Hardware name: Pine64 RockPro64 (DT)
  673. [    3.826260] Workqueue: events deferred_probe_work_func
  674. [    3.826794] pstate: 60000085 (nZCv daIf -PAN -UAO)
  675. [    3.827294] pc : rockchip_pcie_rd_conf+0xa8/0x1b0
  676. [    3.827784] lr : rockchip_pcie_rd_conf+0x144/0x1b0
  677. [    3.828279] sp : ffff00000a4cb800
  678. [    3.828625] x29: ffff00000a4cb800 x28: 0000000000000001
  679. [    3.829179] x27: 0000000000000000 x26: 0000000000000034
  680. [    3.829733] x25: 0000000000000000 x24: 0000000000000000
  681. [    3.830284] x23: ffff00000a4cb8bf x22: ffff8000ef79f800
  682. [    3.830835] x21: ffff00000a4cb864 x20: ffff000009b98450
  683. [    3.831385] x19: ffff00000999c208 x18: ffffffffffffffff
  684. [    3.831936] x17: 0000ffff8fa14a78 x16: ffff000008233890
  685. [    3.832486] x15: ffff0000099c2000 x14: 293635322078616d
  686. [    3.833038] x13: 202c383231207361 x12: 772820363532206f
  687. [    3.833589] x11: 742074657320657a x10: ffff8000ef79eb98
  688. [    3.834139] x9 : 0000000000000000 x8 : 0000000000000000
  689. [    3.834689] x7 : 0000000000100000 x6 : 0000000000000001
  690. [    3.835240] x5 : ffff00000e100034 x4 : ffff00000a4cb864
  691. [    3.835789] x3 : 000000000080000a x2 : ffff8000ef79eb98
  692. [    3.836340] x1 : ffff00000e000000 x0 : ffff000011c0000c
  693. [    3.836893] Process kworker/1:1 (pid: 60, stack limit = 0x        (ptrval))
  694. [    3.837608] Call trace:
  695. [    3.837868]  rockchip_pcie_rd_conf+0xa8/0x1b0
  696. [    3.838323]  pci_bus_read_config_byte+0x78/0xc0
  697. [    3.838795]  __pci_find_next_cap_ttl+0x48/0xf8
  698. [    3.839257]  pci_find_capability+0x64/0x90
  699. [    3.839684]  pci_vpd_init+0x18/0xb8
  700. [    3.840049]  pci_device_add+0x120/0x250
  701. [    3.845175]  pci_scan_single_device+0xc8/0xf8
  702. [    3.850296]  pci_scan_slot+0x34/0xf8
  703. [    3.855276]  pci_scan_child_bus_extend+0x50/0x270
  704. [    3.860314]  pci_scan_bridge_extend+0x2ec/0x570
  705. [    3.865351]  pci_scan_child_bus_extend+0x1d8/0x270
  706. [    3.870435]  pci_scan_root_bus_bridge+0x58/0xd8
  707. [    3.875349]  rockchip_pcie_probe+0x9cc/0xc48
  708. [    3.880172]  platform_drv_probe+0x58/0xb8
  709. [    3.884913]  driver_probe_device+0x238/0x308
  710. [    3.889630]  __device_attach_driver+0x98/0xf0
  711. [    3.894301]  bus_for_each_drv+0x64/0xc8
  712. [    3.898870]  __device_attach+0xd8/0x130
  713. [    3.903386]  device_initial_probe+0x10/0x18
  714. [    3.907877]  bus_probe_device+0x90/0x98
  715. [    3.912273]  deferred_probe_work_func+0xa4/0x148
  716. [    3.916709]  process_one_work+0x1cc/0x320
  717. [    3.921037]  worker_thread+0x44/0x470
  718. [    3.925273]  kthread+0x128/0x130
  719. [    3.929394]  ret_from_fork+0x10/0x18
  720. [    3.933502] Code: 710004df 540002e1 f9400141 8b050025 (394000a1)
  721. [    3.937862] ---[ end trace 156148436ca7a1be ]---
  722. [    3.942081] note: kworker/1:1[60] exited with preempt_count 1
  723. [    3.966148] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  724. Begin: Loading essential drivers ... done.
  725. Begin: Running /scripts/init-premount ... done.
  726. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  727. Begin: Running /scripts/local-premount ... done.
  728. Warning: fsck not present, so skipping root file system
  729. [    4.051949] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  730. done.
  731. Begin: Running /scripts/local-bottom ... done.
  732. Begin: Running /scripts/init-bottom ... done.
  733. [    4.646625] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  734. [    4.657710] systemd[1]: Detected architecture arm64.
  735.  
  736. Welcome to Ubuntu 18.04 LTS!
  737.  
  738. [    4.688295] systemd[1]: Set hostname to <rockpro64>.
  739. [    4.977405] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  740. [    4.981642] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  741. [    5.150514] random: systemd: uninitialized urandom read (16 bytes read)
  742. [    5.157966] systemd[1]: Reached target System Time Synchronized.
  743. [  OK  ] Reached target System Time Synchronized.
  744. [    5.177278] random: systemd: uninitialized urandom read (16 bytes read)
  745. [    5.184777] systemd[1]: Started ntp-systemd-netif.path.
  746. [  OK  ] Started ntp-systemd-netif.path.
  747. [    5.201252] random: systemd: uninitialized urandom read (16 bytes read)
  748. [    5.204562] systemd[1]: Created slice User and Session Slice.
  749. [  OK  ] Created slice User and Session Slice.
  750. [    5.217309] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  751. [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
  752. [    5.230546] systemd[1]: Created slice System Slice.
  753. [  OK  ] Created slice System Slice.
  754. [  OK  ] Listening on udev Kernel Socket.
  755. [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
  756. [  OK  ] Listening on Journal Audit Socket.
  757. [  OK  ] Created slice system-serial\x2dgetty.slice.
  758. [  OK  ] Listening on Journal Socket (/dev/log).
  759. [  OK  ] Reached target Swap.
  760. [  OK  ] Reached target Slices.
  761. [  OK  ] Listening on Syslog Socket.
  762. [  OK  ] Started Forward Password Requests to Wall Directory Watch.
  763. [  OK  ] Reached target Local Encrypted Volumes.
  764. [  OK  ] Listening on Journal Socket.
  765.          Starting Create list of required st…ce nodes for the current kernel...
  766.          Mounting POSIX Message Queue File System...
  767.          Starting Load Kernel Modules...
  768.          Starting Nameserver information manager...
  769.          Starting Restore / save the current clock...
  770.          Mounting Huge Pages File System...
  771.          Mounting Kernel Debug File System...
  772.          Starting Remount Root and Kernel File Systems...
  773.          Starting Set the console keyboard layout...
  774. [  OK  ] Reached target Remote File Systems.
  775.          Starting Journal Service...
  776. [  OK  ] Listening on udev Control Socket.
  777.          Starting udev Coldplug all Devices...
  778. [  OK  ] Started Create list of required sta…vice nodes for the current kernel.
  779. [  OK  ] Mounted POSIX Message Queue File System.
  780. [  OK  ] Started Load Kernel Modules.
  781. [  OK  ] Started Restore / save the current clock.
  782. [  OK  ] Mounted Huge Pages File System.
  783. [  OK  ] Mounted Kernel Debug File System.
  784. [  OK  ] Started Remount Root and Kernel File Systems.
  785. [  OK  ] Started Nameserver information manager.
  786. [  OK  ] Started Journal Service.
  787. [  OK  ] Reached target Network (Pre).
  788.          Starting Flush Journal to Persistent Storage...
  789.          Starting Load/Save Random Seed...
  790.          Mounting Kernel Configuration File System...
  791.          Starting Apply Kernel Variables...
  792.          Mounting FUSE Control File System...
  793.          Starting Create Static Device Nodes in /dev...
  794. [  OK  ] Started Set the console keyboard layout.
  795. [  OK  ] Started Load/Save Random Seed.
  796. [  OK  ] Mounted Kernel Configuration File System.
  797. [  OK  ] Started Apply Kernel Variables.
  798. [  OK  ] Started udev Coldplug all Devices.
  799. [  OK  ] Mounted FUSE Control File System.
  800. [  OK  ] Started Create Static Device Nodes in /dev.
  801.          Starting udev Kernel Device Manager...
  802. [  OK  ] Reached target Local File Systems (Pre).
  803. [  OK  ] Started udev Kernel Device Manager.
  804.          Starting Network Service...
  805. [  OK  ] Found device /dev/ttyS2.
  806. [    6.692830] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  807. [    6.699086] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  808. [  OK  ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  809. [    6.706909] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk  on device rockchip-pinctrl
  810.  
  811. [    6.714889] es8316 1-0010: Error applying setting, reverse things back
  812. [  OK  ] Started Network Service.
  813. [  OK  ] Found device /dev/disk/by-label/boot.
  814. [  OK  ] Started Flush Journal to Persistent Storage.
  815.          Mounting /boot/efi...
  816. [  OK  ] Mounted /boot/efi.
  817. [  OK  ] Reached target Local File Systems.
  818.          Starting Create Volatile Files and Directories...
  819.          Starting Raise network interfaces...
  820.          Starting Set console font and keymap...
  821. [  OK  ] Started Set console font and keymap.
  822. [  OK  ] Started Create Volatile Files and Directories.
  823.          Starting Network Name Resolution...
  824.          Starting Network Time Synchronization...
  825.          Starting Update UTMP about System Boot/Shutdown...
  826. [  OK  ] Started Update UTMP about System Boot/Shutdown.
  827. [  OK  ] Started Raise network interfaces.
  828. [  OK  ] Started Network Time Synchronization.
  829. [  OK  ] Reached target System Initialization.
  830. [  OK  ] Started resolvconf-pull-resolved.path.
  831. [  OK  ] Reached target Paths.
  832. [  OK  ] Started Daily apt download activities.
  833. [  OK  ] Started Daily Cleanup of Temporary Directories.
  834. [  OK  ] Started Message of the Day.
  835. [  OK  ] Started Daily apt upgrade and clean activities.
  836. [  OK  ] Listening on D-Bus System Message Bus Socket.
  837. [  OK  ] Reached target Sockets.
  838. [  OK  ] Reached target Basic System.
  839.          Starting Initializes zram swaping...
  840. [  OK  ] Started ntp-systemd-netif.service.
  841.          Starting System Logging Service...
  842. [  OK  ] Started Set the CPU Frequency Scaling governor.
  843.          Starting Generate SSH keys if not there...
  844.          Starting Resets System Activity Data Collector...
  845. [  OK  ] Started D-Bus System Message Bus.
  846.          Starting WPA supplicant...
  847.          Starting Network Manager...
  848.          Starting Login Service...
  849. [  OK  ] Started Regular background program processing daemon.
  850. [  OK  ] Started Discard unused blocks once a week.
  851. [  OK  ] Reached target Timers.
  852.          Starting Rock 64 First boot...
  853.          Starting Dispatcher daemon for systemd-networkd...
  854. [  OK  ] Started Network Name Resolution.
  855. [  OK  ] Started System Logging Service.
  856. [FAILED] Failed to start Initializes zram swaping.
  857. See 'systemctl status zram-config.service' for details.
  858. [  OK  ] Started Generate SSH keys if not there.
  859. [  OK  ] Started Resets System Activity Data Collector.
  860. [  OK  ] Started Rock 64 First boot.
  861. [  OK  ] Started Login Service.
  862.          Starting resolvconf-pull-resolved.service...
  863. [  OK  ] Reached target Host and Network Name Lookups.
  864. [  OK  ] Started resolvconf-pull-resolved.service.
  865. [  OK  ] Started WPA supplicant.
  866.          Starting Hostname Service...
  867. [  OK  ] Started Hostname Service.
  868. [  OK  ] Started Network Manager.
  869.          Starting Network Manager Script Dispatcher Service...
  870. [  OK  ] Reached target Network.
  871.          Starting OpenBSD Secure Shell server...
  872.          Starting Permit User Sessions...
  873. [  OK  ] Started Permit User Sessions.
  874. [  OK  ] Started Network Manager Script Dispatcher Service.
  875.          Starting Set console scheme...
  876. [  OK  ] Started Serial Getty on ttyS2.
  877. [  OK  ] Started Set console scheme.
  878. [  OK  ] Created slice system-getty.slice.
  879. [  OK  ] Started Getty on tty1.
  880. [  OK  ] Reached target Login Prompts.
  881. [  OK  ] Started OpenBSD Secure Shell server.
  882.          Starting Authorization Manager...
  883. [  OK  ] Started Authorization Manager.
  884. [  OK  ] Started Dispatcher daemon for systemd-networkd.
  885. [  OK  ] Reached target Multi-User System.
  886. [  OK  ] Reached target Graphical Interface.
  887.          Starting Update UTMP about System Runlevel Changes...
  888. [  OK  ] Started Update UTMP about System Runlevel Changes.
  889.  
  890.  
  891. Ubuntu 18.04 LTS rockpro64 ttyS2
  892.  
  893. rockpro64 login:
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top