API tools faq
paste
Advertisement
benoitm974

H96-MAX dtb librelec

benoitm974
Jan 13th, 2021
165
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.03 KB | None | 0 0
raw download clone embed print report
  1. LibreELEC:/ # dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
  3. [ 0.000000] Linux version 5.11.0-rc3 (chewitt@toolbox) (aarch64-none-linux-gnu-gcc.real (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Wed Jan 13 08:33:16 UTC 2021
  4. [ 0.000000] Machine model: Shenzhen Haochuangyi Technology Co., Ltd H96 Max
  5. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
  6. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a0000000, size 896 MiB
  7. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  8. [ 0.000000] Zone ranges:
  9. [ 0.000000] DMA [mem 0x0000000000000000-0x00000000d7ffffff]
  10. [ 0.000000] DMA32 empty
  11. [ 0.000000] Normal empty
  12. [ 0.000000] Movable zone start for each node
  13. [ 0.000000] Early memory node ranges
  14. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
  15. [ 0.000000] node 0: [mem 0x0000000005300000-0x00000000d7ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000d7ffffff]
  17. [ 0.000000] On node 0 totalpages: 883968
  18. [ 0.000000] DMA zone: 13824 pages used for memmap
  19. [ 0.000000] DMA zone: 0 pages reserved
  20. [ 0.000000] DMA zone: 883968 pages, LIFO batch:63
  21. [ 0.000000] psci: probing for conduit method from DT.
  22. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  23. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  24. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  25. [ 0.000000] psci: SMC Calling Convention v1.1
  26. [ 0.000000] percpu: Embedded 23 pages/cpu s54992 r8192 d31024 u94208
  27. [ 0.000000] pcpu-alloc: s54992 r8192 d31024 u94208 alloc=23*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  29. [ 0.000000] Detected VIPT I-cache on CPU0
  30. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  31. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  32. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  33. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  34. [ 0.000000] alternatives: patching kernel code
  35. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 870144
  36. [ 0.000000] Kernel command line: boot=UUID=1301-3350 disk=UUID=2c456028-3627-4d5b-861c-494caaa19dd8 systemd.debug_shell=ttyAML0 console=ttyAML0,115200n8 console=tty0
  37. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  38. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  39. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  40. [ 0.000000] Memory: 2511072K/3535872K available (11008K kernel code, 1832K rwdata, 4280K rodata, 6208K init, 4444K bss, 107296K reserved, 917504K cma-reserved)
  41. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  42. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  43. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  44. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  45. [ 0.000000] Tracing variant of Tasks RCU enabled.
  46. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  47. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  48. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  49. [ 0.000000] GIC: Using split EOI/Deactivate mode
  50. [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  51. [ 0.000000] random: get_random_bytes called from start_kernel+0x5ec/0x7a4 with crng_init=0
  52. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  53. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  54. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  55. [ 0.000213] Console: colour dummy device 80x25
  56. [ 0.002439] printk: console [tty0] enabled
  57. [ 0.002481] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  58. [ 0.002541] ... MAX_LOCKDEP_SUBCLASSES: 8
  59. [ 0.002577] ... MAX_LOCK_DEPTH: 48
  60. [ 0.002615] ... MAX_LOCKDEP_KEYS: 8192
  61. [ 0.002654] ... CLASSHASH_SIZE: 4096
  62. [ 0.002693] ... MAX_LOCKDEP_ENTRIES: 32768
  63. [ 0.002731] ... MAX_LOCKDEP_CHAINS: 65536
  64. [ 0.002771] ... CHAINHASH_SIZE: 32768
  65. [ 0.002809] memory used by lock dependency info: 3637 kB
  66. [ 0.002853] per task-struct memory footprint: 1920 bytes
  67. [ 0.002943] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  68. [ 0.003037] pid_max: default: 32768 minimum: 301
  69. [ 0.003311] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  70. [ 0.003393] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  71. [ 0.007183] rcu: Hierarchical SRCU implementation.
  72. [ 0.008628] smp: Bringing up secondary CPUs ...
  73. [ 0.010143] Detected VIPT I-cache on CPU1
  74. [ 0.010227] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
  75. [ 0.011999] Detected VIPT I-cache on CPU2
  76. [ 0.012057] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
  77. [ 0.013737] Detected VIPT I-cache on CPU3
  78. [ 0.013794] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
  79. [ 0.014075] smp: Brought up 1 node, 4 CPUs
  80. [ 0.014357] SMP: Total of 4 processors activated.
  81. [ 0.014403] CPU features: detected: Privileged Access Never
  82. [ 0.014450] CPU features: detected: LSE atomic instructions
  83. [ 0.014497] CPU features: detected: 32-bit EL0 Support
  84. [ 0.014541] CPU features: detected: Common not Private translations
  85. [ 0.014591] CPU features: detected: RAS Extension Support
  86. [ 0.014637] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  87. [ 0.014705] CPU features: detected: CRC32 instructions
  88. [ 0.014750] CPU features: detected: RCpc load-acquire (LDAPR)
  89. [ 0.054087] CPU: All CPU(s) started at EL2
  90. [ 0.056053] devtmpfs: initialized
  91. [ 0.085771] KASLR disabled due to lack of seed
  92. [ 0.086286] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  93. [ 0.086386] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
  94. [ 0.106241] pinctrl core: initialized pinctrl subsystem
  95. [ 0.108614] NET: Registered protocol family 16
  96. [ 0.112051] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  97. [ 0.112405] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  98. [ 0.112899] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  99. [ 0.114277] thermal_sys: Registered thermal governor 'step_wise'
  100. [ 0.115257] cpuidle: using governor menu
  101. [ 0.115547] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  102. [ 0.115813] ASID allocator initialised with 32768 entries
  103. [ 0.191901] cryptd: max_cpu_qlen set to 1000
  104. [ 0.199547] AO_5V: supplied by DC_IN
  105. [ 0.200510] VDDAO_3V3: supplied by DC_IN
  106. [ 0.201452] EMMC_1V8: supplied by VDDAO_3V3
  107. [ 0.201661] VDDIO_AO1V8: supplied by VDDAO_3V3
  108. [ 0.202487] iommu: Default domain type: Translated
  109. [ 0.203343] SCSI subsystem initialized
  110. [ 0.203759] libata version 3.00 loaded.
  111. [ 0.204254] usbcore: registered new interface driver usbfs
  112. [ 0.204421] usbcore: registered new interface driver hub
  113. [ 0.204558] usbcore: registered new device driver usb
  114. [ 0.205533] mc: Linux media interface: v0.10
  115. [ 0.205639] videodev: Linux video capture interface: v2.00
  116. [ 0.205965] pps_core: LinuxPPS API ver. 1 registered
  117. [ 0.206013] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  118. [ 0.207018] Advanced Linux Sound Architecture Driver Initialized.
  119. [ 0.208787] clocksource: Switched to clocksource arch_sys_counter
  120. [ 0.209908] FS-Cache: Loaded
  121. [ 0.226921] NET: Registered protocol family 2
  122. [ 0.228361] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 163840 bytes, linear)
  123. [ 0.228893] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  124. [ 0.229407] TCP bind hash table entries: 32768 (order: 9, 2359296 bytes, linear)
  125. [ 0.232970] TCP: Hash tables configured (established 32768 bind 32768)
  126. [ 0.233335] UDP hash table entries: 2048 (order: 6, 327680 bytes, linear)
  127. [ 0.233908] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes, linear)
  128. [ 0.234739] NET: Registered protocol family 1
  129. [ 0.235929] RPC: Registered named UNIX socket transport module.
  130. [ 0.235991] RPC: Registered udp transport module.
  131. [ 0.236037] RPC: Registered tcp transport module.
  132. [ 0.236081] RPC: Registered tcp NFSv4.1 backchannel transport module.
  133. [ 0.270587] Initialise system trusted keyrings
  134. [ 0.271078] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  135. [ 0.291114] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  136. [ 0.291686] FS-Cache: Netfs 'nfs' registered for caching
  137. [ 0.292956] NFS: Registering the id_resolver key type
  138. [ 0.293068] Key type id_resolver registered
  139. [ 0.293114] Key type id_legacy registered
  140. [ 0.293401] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  141. [ 0.294463] FS-Cache: Netfs 'cifs' registered for caching
  142. [ 0.295217] Key type cifs.idmap registered
  143. [ 0.332999] NET: Registered protocol family 38
  144. [ 0.333098] Key type asymmetric registered
  145. [ 0.333173] Asymmetric key parser 'x509' registered
  146. [ 0.333288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  147. [ 0.333675] io scheduler mq-deadline registered
  148. [ 0.333727] io scheduler kyber registered
  149. [ 0.365306] soc soc0: Amlogic Meson SM1 (S905X3) Revision 2b:c (10:2) Detected
  150. [ 0.368250] VDDCPU: supplied by regulator-dummy
  151. [ 0.371632] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart
  152. [ 1.209087] printk: console [ttyAML0] enabled
  153. [ 1.215132] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 28, base_baud = 1500000) is a meson_uart
  154. [ 1.223053] serial serial0: tty port ttyAML6 registered
  155. [ 1.254172] brd: module loaded
  156. [ 1.254569] loop: module loaded
  157. [ 1.351160] Loading iSCSI transport class v2.0-870.
  158. [ 1.352620] iscsi: registered transport (tcp)
  159. [ 1.356802] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  160. [ 1.362557] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  161. [ 1.373472] libphy: Fixed MDIO Bus: probed
  162. [ 1.378710] tun: Universal TUN/TAP device driver, 1.6
  163. [ 1.383814] usbcore: registered new interface driver rtl8150
  164. [ 1.386829] usbcore: registered new interface driver r8152
  165. [ 1.393596] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  166. [ 1.398612] ehci-platform: EHCI generic platform driver
  167. [ 1.404032] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  168. [ 1.409966] ohci-platform: OHCI generic platform driver
  169. [ 1.416092] usbcore: registered new interface driver uas
  170. [ 1.420465] usbcore: registered new interface driver usb-storage
  171. [ 1.426849] mousedev: PS/2 mouse device common for all mice
  172. [ 1.432610] i2c /dev entries driver
  173. [ 1.437252] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
  174. [ 1.462329] meson-gx-mmc ffe05000.sd: Got CD GPIO
  175. [ 1.462506] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
  176. [ 1.462589] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  177. [ 1.467497] ledtrig-cpu: registered to indicate activity on CPUs
  178. [ 1.479257] meson-sm: secure-monitor enabled
  179. [ 1.487413] hid: raw HID events driver (C) Jiri Kosina
  180. [ 1.489663] usbcore: registered new interface driver usbhid
  181. [ 1.496403] usbhid: USB HID core driver
  182. [ 1.521667] NET: Registered protocol family 10
  183. [ 1.542812] Segment Routing with IPv6
  184. [ 1.544791] NET: Registered protocol family 17
  185. [ 1.547311] Key type dns_resolver registered
  186. [ 1.547559] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  187. [ 1.551758] Loading compiled-in X.509 certificates
  188. [ 1.560670] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  189. [ 1.567010] mmc1: new high speed SDXC card at address 2121
  190. [ 1.568994] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  191. [ 1.573424] mmcblk1: mmc1:2121 APPSD 500 GiB
  192. [ 1.584657] mmcblk1: p1 p2
  193. [ 1.615291] mmc2: new HS200 MMC card at address 0001
  194. [ 1.616329] mmcblk2: mmc2:0001 CWBD3R 58.2 GiB
  195. [ 1.619601] mmcblk2boot0: mmc2:0001 CWBD3R partition 1 4.00 MiB
  196. [ 1.625732] mmcblk2boot1: mmc2:0001 CWBD3R partition 2 4.00 MiB
  197. [ 1.631575] mmcblk2rpmb: mmc2:0001 CWBD3R partition 3 4.00 MiB, chardev (242:0)
  198. [ 1.640935] mmcblk2: p1 p2
  199. [ 1.658490] random: fast init done
  200. [ 1.681425] mmc0: new high speed SDIO card at address 0001
  201. [ 1.706451] meson-drm ff900000.vpu: Queued 2 outputs on vpu
  202. [ 1.707725] meson-drm ff900000.vpu: CVBS Output connector not available
  203. [ 1.759746] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  204. [ 1.768198] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  205. [ 1.773938] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
  206. [ 1.780597] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  207. [ 2.010949] Console: switching to colour frame buffer device 128x48
  208. [ 2.028342] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
  209. [ 2.041527] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
  210. [ 2.042622] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
  211. [ 2.048948] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
  212. [ 2.054760] meson8b-dwmac ff3f0000.ethernet: The only allowed RGMII RX delays values are: 0ps, 2000ps
  213. [ 2.063944] meson8b-dwmac: probe of ff3f0000.ethernet failed with error -22
  214. [ 2.071186] stmmaceth ff3f0000.ethernet: IRQ eth_wake_irq not found
  215. [ 2.076963] stmmaceth ff3f0000.ethernet: IRQ eth_lpi not found
  216. [ 2.082835] stmmaceth ff3f0000.ethernet: PTP uses main clock
  217. [ 2.088672] stmmaceth ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  218. [ 2.095105] stmmaceth ff3f0000.ethernet: DWMAC1000
  219. [ 2.099971] stmmaceth ff3f0000.ethernet: DMA HW capability register supported
  220. [ 2.106972] stmmaceth ff3f0000.ethernet: RX Checksum Offload Engine supported
  221. [ 2.114046] stmmaceth ff3f0000.ethernet: COE Type 2
  222. [ 2.118875] stmmaceth ff3f0000.ethernet: TX Checksum insertion supported
  223. [ 2.125520] stmmaceth ff3f0000.ethernet: Wake-Up On Lan supported
  224. [ 2.131657] stmmaceth ff3f0000.ethernet: Normal descriptors
  225. [ 2.137076] stmmaceth ff3f0000.ethernet: Ring mode enabled
  226. [ 2.142508] stmmaceth ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  227. [ 2.151022] libphy: stmmac: probed
  228. [ 2.156181] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
  229. [ 2.158657] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
  230. [ 2.167727] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
  231. [ 2.171455] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
  232. [ 2.178831] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  233. [ 2.187533] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  234. [ 2.190902] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  235. [ 2.198566] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
  236. [ 2.207710] xhci-hcd xhci-hcd.3.auto: irq 37, io mem 0xff500000
  237. [ 2.214306] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
  238. [ 2.221698] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  239. [ 2.228851] usb usb1: Product: xHCI Host Controller
  240. [ 2.233676] usb usb1: Manufacturer: Linux 5.11.0-rc3 xhci-hcd
  241. [ 2.239368] usb usb1: SerialNumber: xhci-hcd.3.auto
  242. [ 2.245255] hub 1-0:1.0: USB hub found
  243. [ 2.247969] hub 1-0:1.0: 2 ports detected
  244. [ 2.252618] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  245. [ 2.257360] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  246. [ 2.264919] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  247. [ 2.271476] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  248. [ 2.279571] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
  249. [ 2.287583] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  250. [ 2.294743] usb usb2: Product: xHCI Host Controller
  251. [ 2.299572] usb usb2: Manufacturer: Linux 5.11.0-rc3 xhci-hcd
  252. [ 2.305273] usb usb2: SerialNumber: xhci-hcd.3.auto
  253. [ 2.310927] hub 2-0:1.0: USB hub found
  254. [ 2.313850] hub 2-0:1.0: 1 port detected
  255. [ 2.326482] libphy: mdio_mux: probed
  256. [ 2.542087] libphy: mdio_mux: probed
  257. [ 2.556745] printk: console [netcon0] enabled
  258. [ 2.558827] netconsole: network logging started
  259. [ 2.563005] ALSA device list:
  260. [ 2.565010] #0: H96-MAX
  261. [ 2.570880] Freeing unused kernel memory: 6208K
  262. [ 2.590697] Run /init as init process
  263. [ 2.605087] with arguments:
  264. [ 2.605124] /init
  265. [ 2.605156] with environment:
  266. [ 2.605185] HOME=/
  267. [ 2.605214] TERM=linux
  268. [ 2.605243] boot=UUID=1301-3350
  269. [ 2.605274] disk=UUID=2c456028-3627-4d5b-861c-494caaa19dd8
  270. [ 2.712084] Checking disk(s): UUID=1301-3350 UUID=2c456028-3627-4d5b-861c-494caaa19dd8
  271. [ 3.538908] fsck: CP437: Invalid argument
  272. [ 3.539103] fsck: fsck.fat 4.1 (2017-01-24)
  273. [ 3.539345] fsck: /dev/mmcblk1p1: 165 files, 15415/65501 clusters
  274. [ 3.539586] fsck: STORAGE: clean, 12/8192 files, 5914/32768 blocks
  275. [ 3.769304] loop0: detected capacity change from 217296 to 0
  276. [ 3.949396] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
  277. [ 4.926876] systemd[1]: System time before build time, advancing clock.
  278. [ 5.070463] systemd[1]: systemd 247 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  279. [ 5.071367] systemd[1]: Detected architecture arm64.
  280. [ 5.071935] systemd[1]: Detected first boot.
  281. [ 5.102206] systemd[1]: Set hostname to <LibreELEC>.
  282. [ 5.102429] systemd[1]: Cannot open /etc/machine-id: No such file or directory
  283. [ 5.986327] systemd[1]: Populated /etc with preset unit settings.
  284. [ 6.145106] systemd[1]: Queued start job for default target FS Resize target.
  285. [ 6.146570] random: systemd: uninitialized urandom read (16 bytes read)
  286. [ 6.207490] systemd[1]: Started Early root shell on /dev/ttyAML0 FOR DEBUGGING ONLY.
  287. [ 6.208572] random: systemd: uninitialized urandom read (16 bytes read)
  288. [ 6.213899] systemd[1]: Started FS Resize.
  289. [ 6.214683] random: systemd: uninitialized urandom read (16 bytes read)
  290. [ 6.214766] systemd[1]: Reached target FS Resize target.
  291. [ 6.215424] systemd[1]: Startup finished in 4.917s (kernel) + 1.292s (userspace) = 6.210s.
  292. [ 6.216689] systemd[1]: System is tainted: var-run-bad
  293. [ 6.366453] systemd[1]: storage.mount: Succeeded.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!