API tools faq
paste
Advertisement
Astralix

No-Box-Fb

Astralix
Jun 18th, 2013
91
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 23.79 KB | None | 0 0
raw download clone embed print report
  1. SRX
  2. DDR3
  3. 300MHz
  4. Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Die Bus-Width=8 Size=2048MB
  5. OUT
  6. BUILD=====5
  7. F:32 1061 2 0 40
  8. GetRemapTbl flag = 0
  9. OK! 40371
  10. unsigned!
  11. SecureBootEn = 0 0
  12. Boot ver: 2013-05-18#1.20
  13. start_linux=====51994
  14. 807203 Starting kernel...@0x60408000
  15.  
  16. [ 0.000000] Initializing cgroup subsys cpu
  17. [ 0.000000] Linux version 3.0.36+ (uprinz@BigBox) (gcc version 4.4.3 (GCC) ) #49 SMP PREEMPT Wed Jun 19 15:57:01 CEST 2013
  18. [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
  19. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  20. [ 0.000000] Machine: RK30board
  21. [ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
  22. [ 0.000000] memory reserve: Memory(base:0x90d00000 size:11M) reserved for <fb0 buf>
  23. [ 0.000000] memory reserve: Total reserved 91M
  24. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  25. [ 0.000000] bootconsole [earlycon0] enabled
  26. [ 0.000000] CPU SRAM: copied sram code from c0b8c000 to fef00100 - fef021d0
  27. [ 0.000000] CPU SRAM: copied sram data from c0b8e0d0 to fef021d0 - fef02944
  28. [ 0.000000] sram_log: 4q ?& : 4q ?) !?, # 0q *! ! 3q @ 3q
  29. [ 0.000000] CLKDATA_MSG: pll_flag = 0x00
  30. [ 0.000000] L310 cache controller enabled
  31. [ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  32. [ 0.000000] DDR DEBUG: version 1.00 20130427
  33. [ 0.000000] DDR DEBUG: DDR3 Device
  34. [ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=16 CS=1 Total Capability=2048MB
  35. [ 0.000000] DDR DEBUG: init success!!! freq=396MHz
  36. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  37. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  38. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  39. [ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  40. [ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  41. [ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  42. [ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  43. [ 0.000000] PERCPU: Embedded 7 pages/cpu @c32bf000 s7008 r8192 d13472 u32768
  44. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 496896
  45. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x002B0000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00008000@0x0000A000(boot),0x00010000@0x00012000(recovery),0x00020000@0x00022000(backup),0x00040000@0x00042000(cache),0x00400000@0x00082000(userdata),0x00002000@0x00482000(kpanic),0x00100000@0x00484000(system),-@0x00584000(user) bootver=2013-05-18#1.20 firmware_ver=4.1.1
  46. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  49. [ 0.000000] Memory: 781MB 1176MB = 1957MB total
  50. [ 0.000000] Memory: 1965208k/1965208k available, 131944k reserved, 1204224K highmem
  51. [ 0.000000] Virtual kernel memory layout:
  52. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  53. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  54. [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  55. [ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  56. [ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  57. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  58. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  59. [ 0.000000] .init : 0xc0408000 - 0xc0512000 (1064 kB)
  60. [ 0.000000] .text : 0xc0512000 - 0xc0b24674 (6218 kB)
  61. [ 0.000000] .data : 0xc0b26000 - 0xc0b8bae8 ( 407 kB)
  62. [ 0.000000] .bss : 0xc0b8f024 - 0xc1634a30 (10903 kB)
  63. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  64. [ 0.000000] Preemptible hierarchical RCU implementation.
  65. [ 0.000000] NR_IRQS:352
  66. [ 0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
  67. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  68. [ 0.000000] rk_timer: version 1.2
  69. [ 0.000000] Console: colour dummy device 80x30
  70. [ 0.008692] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  71. [ 0.017774] pid_max: default: 32768 minimum: 301
  72. [ 0.023085] Mount-cache hash table entries: 512
  73. [ 0.028656] Initializing cgroup subsys debug
  74. [ 0.033392] Initializing cgroup subsys cpuacct
  75. [ 0.038347] Initializing cgroup subsys freezer
  76. [ 0.043281] CPU: Testing write buffer coherency: ok
  77. [ 0.129350] CPU1: Booted secondary processor
  78. [ 0.169344] CPU2: Booted secondary processor
  79. [ 0.209344] CPU3: Booted secondary processor
  80. [ 0.209383] Brought up 4 CPUs
  81. [ 0.226892] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
  82. [ 0.234251] devtmpfs: initialized
  83. [ 0.244121] NET: Registered protocol family 16
  84. [ 0.249154] last_log: 0xf0900000 map to 0xf7004000 and copy to 0xc0b93180 (version 2.1)
  85. [ 0.271526] lcdc0 is used as primary display device contoller!
  86. [ 0.278035] warning:lcdc1 not add to system!
  87. [ 0.282949] rk29sdk_wifi_bt_gpio_control_init: request wifi power gpio failed
  88. <hit enter to activate fiq debugger>
  89. 0.292060] console [ttyFIQ0] enabled, bootconsole disabled
  90. [ 0.292060] console [ttyFIQ0] enabled, bootconsole disabled
  91. [ 0.301103] Registered FIQ tty driver f083dcc0
  92. [ 0.313671] bio: create slab <bio-0> at 0
  93. [ 0.318078] SCSI subsystem initialized
  94. [ 0.318282] usbcore: registered new interface driver usbfs
  95. [ 0.318388] usbcore: registered new interface driver hub
  96. [ 0.332653] usbcore: registered new device driver usb
  97. [ 0.332889] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  98. [ 0.333027] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  99. [ 0.333216] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  100. [ 0.333501] Advanced Linux Sound Architecture Driver Version 1.0.24.
  101. [ 0.333925] Bluetooth: Core ver 2.16
  102. [ 0.333992] NET: Registered protocol family 31
  103. [ 0.334024] Bluetooth: HCI device and connection manager initialized
  104. [ 0.334068] Bluetooth: HCI socket layer initialized
  105. [ 0.334102] Bluetooth: L2CAP socket layer initialized
  106. [ 0.334148] Bluetooth: SCO socket layer initialized
  107. [ 0.335187] rk fb probe ok!
  108. [ 0.335269] Switching to clocksource rk_timer
  109. [ 0.338872] Switched to NOHz mode on CPU #0
  110. [ 0.339384] Switched to NOHz mode on CPU #3
  111. [ 0.339397] Switched to NOHz mode on CPU #1
  112. [ 0.339409] Switched to NOHz mode on CPU #2
  113. [ 0.342111] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf7090000
  114. [ 0.342182] fb0:win0
  115. [ 0.342187] fb1:win1
  116. [ 0.342192] fb2:win2
  117. [ 0.342272] rk3188 lcdc0 clk enable...
  118. [ 0.342312] rk3188 lcdc0 clk disable...
  119. [ 0.364724] fb0:phy:90d00000>>vir:f8000000>>len:0xb00000
  120. [ 0.365056] rk_fb_register>>>>>fb0
  121. [ 0.365251] rk_fb_register>>>>>fb1
  122. [ 0.365294] rk3188 lcdc0 clk enable...
  123. [ 0.365353] lcdc0: dclk:74250000>>fps:60
  124. [ 0.365385] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  125. [ 0.365426] lcdc0 wakeup from standby!
  126. [ 0.365454] lcdc0 win0 open,atv layer:1
  127. [ 0.365483] lcdc0: dclk:74250000>>fps:60
  128. [ 0.365511] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
  129. [ 0.384619] rk3188 lcdc0 probe ok!
  130. [ 0.384743] HDMI: hdmi_register() - video source 0 display 0
  131. [ 0.384999] HDMI: hdmi_submit_work event 0100 delay 0
  132. [ 0.385131] HDMI:
  133. [ 0.385137] hdmi_work_queue() - evt= 1 0
  134. [ 0.385174] HDMI: hdmi_work_queue() - exit
  135. [ 0.385181]
  136. [ 0.489702] IT66121 probe success.
  137. [ 0.496212] NET: Registered protocol family 2
  138. [ 0.496359] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  139. [ 0.496745] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  140. [ 0.498614] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  141. [ 0.499805] TCP: Hash tables configured (established 131072 bind 65536)
  142. [ 0.499850] TCP reno registered
  143. [ 0.499879] UDP hash table entries: 512 (order: 2, 16384 bytes)
  144. [ 0.499946] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  145. [ 0.500298] NET: Registered protocol family 1
  146. [ 0.500486] Unpacking initramfs...
  147. [ 0.560706] cfg80211: Calling CRDA to update world regulatory domain
  148. [ 0.674406] Freeing initrd memory: 2752K
  149. [ 0.674508] PMU: registered new PMU device of type 0
  150. [ 0.674611] DVFS ERR: gpu can't get regulator in clk_enable_dvfs
  151. [ 0.674659] DVFS ERR: ddr can't get regulator in clk_enable_dvfs
  152. [ 0.674705] DVFS ERR: cpu can't get regulator in clk_enable_dvfs
  153. [ 0.701436] rk3188 cpufreq version 2.0, suspend freq 816 MHz
  154. [ 0.701727] Loaded driver for PL330 DMAC-1 rk29-pl330
  155. [ 0.701753] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  156. [ 0.701894] Loaded driver for PL330 DMAC-2 rk29-pl330
  157. [ 0.701919] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  158. [ 0.729586] highmem bounce pool size: 64 pages
  159. [ 0.729706] ashmem: initialized
  160. [ 0.737973] fuse init (API version 7.16)
  161. [ 0.742415] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  162. [ 0.742453] io scheduler noop registered
  163. [ 0.742481] io scheduler deadline registered
  164. [ 0.742527] io scheduler cfq registered (default)
  165. [ 0.762777] rga: Driver loaded succesfully
  166. [ 0.762932] rk_serial.c v1.3 2012-12-14
  167. [ 0.762997] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  168. [ 0.915337] rk_serial rk_serial.0: membase 0xf70a8000
  169. [ 0.915406] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  170. [ 1.075336] rk_serial rk_serial.3: membase 0xf70b0000
  171. [ 1.075512] Rockchip ion module(version: 1.0) is successfully loaded
  172. [ 1.076939] loop: module loaded
  173. [ 1.076978] Android kernel panic handler initialized (bind=kpanic)
  174. [ 1.077007] Enter tcc_bt_init_module
  175. [ 1.077040] tcc_bt_probe.
  176. [ 1.077069] [## BT ##] init_module
  177. [ 1.105972] PPP generic driver version 2.4.2
  178. [ 1.106103] PPP Deflate Compression module registered
  179. [ 1.106129] PPP BSD Compression module registered
  180. [ 1.120310] PPP MPPE Compression module registered
  181. [ 1.120338] NET: Registered protocol family 24
  182. [ 1.120409] usbcore: registered new interface driver asix
  183. [ 1.120452] usbcore: registered new interface driver cdc_ether
  184. [ 1.120497] usbcore: registered new interface driver dm9620
  185. [ 1.120548] usbcore: registered new interface driver SR9700_android
  186. [ 1.120593] usbcore: registered new interface driver net1080
  187. [ 1.120636] usbcore: registered new interface driver cdc_subset
  188. [ 1.120679] usbcore: registered new interface driver zaurus
  189. [ 1.120713] cdc_ncm: 04-Aug-2011
  190. [ 1.120747] usbcore: registered new interface driver cdc_ncm
  191. [ 1.120773] Rockchip WiFi SYS interface (V1.00) ...
  192. [ 1.120818] Initializing USB Mass Storage driver...
  193. [ 1.120866] usbcore: registered new interface driver usb-storage
  194. [ 1.120893] USB Mass Storage support registered.
  195. [ 1.120969] usbcore: registered new interface driver usbserial
  196. [ 1.121011] USB Serial support registered for generic
  197. [ 1.121056] usbcore: registered new interface driver usbserial_generic
  198. [ 1.121085] usbserial: USB Serial Driver core
  199. [ 1.121120] USB Serial support registered for GSM modem (1-port)
  200. [ 1.121170] usbcore: registered new interface driver option
  201. [ 1.121196] option: v0.7.2:USB Driver for GSM modems
  202. [ 1.121240] USB Serial support registered for usi-modem
  203. [ 1.121283] usbcore: registered new interface driver usi-modem
  204. [ 1.342697] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  205. [ 1.342730] usb20_otg usb20_otg: DWC OTG Controller
  206. [ 1.342822] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  207. [ 1.342872] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  208. [ 1.342919] DWC_OTG: Init: Port Power? op_state=1
  209. [ 1.342941] DWC_OTG: Init: Power Port (0)
  210. [ 1.342996] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  211. [ 1.343028] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  212. [ 1.343061] usb usb1: Product: DWC OTG Controller
  213. [ 1.343084] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
  214. [ 1.343110] usb usb1: SerialNumber: usb20_otg
  215. [ 1.343366] hub 1-0:1.0: USB hub found
  216. [ 1.343391] hub 1-0:1.0: 1 port detected
  217. [ 1.345924] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
  218. [ 1.556316] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  219. [ 1.556352] usb20_host usb20_host: DWC OTG Controller
  220. [ 1.556398] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  221. [ 1.556445] usb20_host usb20_host: irq 49, io mem 0x00000000
  222. [ 1.556504] DWC_OTG: Init: Port Power? op_state=1
  223. [ 1.556526] DWC_OTG: Init: Power Port (0)
  224. [ 1.556570] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  225. [ 1.556602] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  226. [ 1.556635] usb usb2: Product: DWC OTG Controller
  227. [ 1.556657] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
  228. [ 1.556683] usb usb2: SerialNumber: usb20_host
  229. [ 1.556924] hub 2-0:1.0: USB hub found
  230. [ 1.556949] hub 2-0:1.0: 1 port detected
  231. [ 1.557251] DWC_OTG: Mode Mismatch Interrupt: currently in Host mode
  232. [ 1.630530] android_usb gadget: Mass Storage Function, version: 2009/09/11
  233. [ 1.630564] android_usb gadget: Number of LUNs=2
  234. [ 1.630596] lun0: LUN: removable file: (no medium)
  235. [ 1.630619] lun1: LUN: removable file: (no medium)
  236. [ 1.630778] android_usb gadget: android_usb ready
  237. [ 1.630842] rk29-keypad: probe of rk29-keypad failed with error -22
  238. [ 1.631098] i2c /dev entries driver
  239. [ 1.631380] lirc_dev: IR Remote Control driver registered, major 250
  240. [ 1.631410] IR NEC protocol handler initialized
  241. [ 1.631431] IR RC5(x) protocol handler initialized
  242. [ 1.631453] IR RC6 protocol handler initialized
  243. [ 1.631474] IR JVC protocol handler initialized
  244. [ 1.631495] IR Sony protocol handler initialized
  245. [ 1.631516] IR RC5 (streamzap) protocol handler initialized
  246. [ 1.631540] IR LIRC bridge handler initialized
  247. [ 1.631560] Linux video capture interface: v2.00
  248. [ 1.631634] usbcore: registered new interface driver uvcvideo
  249. [ 1.631661] USB Video Class driver (v1.1.0)
  250. [ 1.631681] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
  251. [ 1.631835] rk29-wdt rk29-wdt.0: starting watchdog timer
  252. [ 1.632121] device-mapper: uevent: version 1.0.3
  253. [ 1.632291] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  254. [ 1.632395] Bluetooth: HCI UART driver ver 2.2
  255. [ 1.632418] Bluetooth: HCI H4 protocol initialized
  256. [ 1.632440] Bluetooth: HCILL protocol initialized
  257. [ 1.632551] cpuidle: using governor ladder
  258. [ 1.632575] cpuidle: using governor menu
  259. [ 1.647783]
  260. [ 1.647786] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc0]
  261. [ 1.652846] rk29_sdmmc_change_clk_div..1935.. newDiv=62, newCLK=299Khz [sd_mmc]
  262. [ 1.652916] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sd_mmc]
  263. [ 1.653059] .Line3910..The End of SDMMC-probe Ver.5.03 The last modify date is 2013-02-21. [sdio]
  264. [ 1.654113] usbcore: registered new interface driver usbhid
  265. [ 1.654141] usbhid: USB HID core driver
  266. [ 1.689582]
  267. [ 1.689585] mmc_attach_sd..1219.. ===== Begin to identify card as SD-card. [mmc0]
  268. [ 1.761131] rk29_sdmmc_change_clk_div..1935.. newDiv=0, newCLK=37125Khz [sd_mmc]
  269. [ 1.761206] mmc0: new high speed SD card at address e624
  270. [ 1.761561] logger: created 256K log 'log_main'
  271. [ 1.761628] logger: created 256K log 'log_events'
  272. [ 1.761694] logger: created 256K log 'log_radio'
  273. [ 1.761766] logger: created 256K log 'log_system'
  274. [ 1.762332] mmcblk0: mmc0:e624 SU02G 1.84 GiB
  275. [ 1.764964] asoc: hdmi-audio-codec <-> rk29_i2s.1 mapping ok
  276. [ 1.765217] ALSA device list:
  277. [ 1.765234] #0: ROCKCHIP HDMI
  278. [ 1.765315] GACT probability NOT on
  279. [ 1.765374] Mirror/redirect action on
  280. [ 1.765394] u32 classifier
  281. [ 1.765407] Actions configured
  282. [ 1.765425] Netfilter messages via NETLINK v0.30.
  283. [ 1.765475] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  284. [ 1.765731] ctnetlink v0.93: registering with nfnetlink.
  285. [ 1.765777] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  286. [ 1.765808] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  287. [ 1.766048] xt_time: kernel timezone is -0000
  288. [ 1.766165] ip_tables: (C) 2000-2006 Netfilter Core Team
  289. [ 1.766282] arp_tables: (C) 2002 David S. Miller
  290. [ 1.766333] TCP cubic registered
  291. [ 1.766349] Initializing XFRM netlink socket
  292. [ 1.766671] NET: Registered protocol family 10
  293. [ 1.767163] Mobile IPv6
  294. [ 1.767194] ip6_tables: (C) 2000-2006 Netfilter Core Team
  295. [ 1.767308] IPv6 over IPv4 tunneling driver
  296. [ 1.767791] NET: Registered protocol family 17
  297. [ 1.767829] NET: Registered protocol family 15
  298. [ 1.767988] Bluetooth: RFCOMM TTY layer initialized
  299. [ 1.768034] Bluetooth: RFCOMM socket layer initialized
  300. [ 1.768058] Bluetooth: RFCOMM ver 1.11
  301. [ 1.768077] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  302. [ 1.768102] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  303. [ 1.768211] NET: Registered protocol family 35
  304. [ 1.768355] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  305. [ 1.768409] Registering SWP/SWPB emulation handler
  306. [ 1.768753] ddrfreq: change freq to 396 MHz when normal
  307. [ 1.768896] ddrfreq: verion 2.2
  308. [ 1.768956]
  309. [ 1.768959] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]
  310. [ 1.769018] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
  311. [ 1.769052] msdos_partition..543... ==== partition-1, size=1929244KB [mmc0]
  312. [ 1.769084] msdos_partition..571... ==== main partition-1....[mmc0]
  313. [ 1.769114] mmcblk0: p1
  314. [ 1.769382] mmc_rescan_try_freq..1718.. ===== Initialize SD-card successfully. [mmc0]
  315. [ 1.769428]
  316. [ 1.769431] drivers/mmc/core/core.c...1824.. ===== mmc_rescan Begin....[mmc1]
  317. [ 1.769483] ddrfreq: normal 396MHz video 300MHz idle 0MHz suspend 0MHz reboot 396MHz
  318. [ 1.769782] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  319. [ 1.770013] usbcore: registered new interface driver snd-usb-audio
  320. [ 1.770209] Freeing init memory: 1064K
  321. [ 2.070221] init: /init.rc: 378: setprop requires 2 arguments
  322. [ 2.071260] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  323. [ 2.118183] fb0 check_var fail 2!!!
  324. [ 2.118191] xoffset:0>>xres:1280>>xres_vir:1280
  325. [ 2.118197] yoffset:1>>yres:720>>yres_vir:720
  326. [ 2.458810] gp_rknand_info = : 0xf0adc300
  327. [ 2.458962] request IRQ_NANDC irq , ret=0.........
  328. [ 2.458997] FTL INFO:Version = 438,Date = 20130516
  329. [ 2.459062] FlashCopyProgBuf1=0xc14d9000
  330. [ 2.459100] ATime: 40 ns AHB: 148 timming: 1081
  331. [ 2.459126] No.1 FLASH INFO:2c 64 44 4b a9
  332. [ 2.459497] ATime: 32 ns AHB: 148 timming: 1061
  333. [ 2.459687] ATime: 32 ns AHB: 148 timming: 1061
  334. [ 2.459710] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00b68c
  335. [ 2.478909] GetRemapTbl...done
  336. [ 5.410769] totalLogicBlkRaw = 1906
  337. [ 5.410792] gBootMedia = 1 gSdmmcFwPartOffset =0!
  338. [ 5.410815] rknand_buffer.c version: 4.38 20121130!
  339. [ 5.410958] 10 cmdlinepart partitions found on MTD device rk29xxnand
  340. [ 5.410989] Creating 10 MTD partitions on "rk29xxnand":
  341. [ 5.411017] 0x000000400000-0x000000800000 : "misc"
  342. [ 5.411871] 0x000000800000-0x000001400000 : "kernel"
  343. [ 5.412572] 0x000001400000-0x000002400000 : "boot"
  344. [ 5.413226] 0x000002400000-0x000004400000 : "recovery"
  345. [ 5.413918] 0x000004400000-0x000008400000 : "backup"
  346. [ 5.414638] 0x000008400000-0x000010400000 : "cache"
  347. [ 5.415435] 0x000010400000-0x000090400000 : "userdata"
  348. [ 5.417225] 0x000090400000-0x000090800000 : "kpanic"
  349. [ 5.418694] apanic: Bound to mtd partition 'kpanic'
  350. [ 5.418720] apanic: No panic data available
  351. [ 5.418861] 0x000090800000-0x0000b0800000 : "system"
  352. [ 5.419844] 0x0000b0800000-0x0001dc800000 : "user"
  353. [ 5.422873] startBlk = 43 sysProtAddr = 42
  354. [ 5.464353] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  355. [ 6.753543] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  356. [ 6.783795] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  357. [ 6.798356] UMP: Using OS memory backend, allocation limit: 1073741824
  358. [ 6.798405] UMP: UMP device driver loaded
  359. [ 6.816641] Mali: Mali400 inside of rk3188!
  360. [ 6.816678] Mali: mali freq table num : 6
  361. [ 6.816701] Mali: mali freq table :Mali: 133,Mali: 200,Mali: 266,Mali: 297,Mali: 399,Mali: 594,Mali:
  362. [ 6.816800] Mali: init mali clock success
  363. [ 6.822073] Mali: @@@@@@@Mali device driver loaded success@@@@@@@@
  364. [ 6.825157] mirroring: Unknown symbol video_data_to_mirroring (err 0)
  365. [ 6.825215] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
  366. [ 6.828236] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
  367. [ 6.829019] ipp irq 47
  368. [ 6.829290] IPP init, version rk30-ipp 1.003
  369. [ 6.981914] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  370. [ 6.991869] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  371. [ 7.169348] init: cannot find '/system/bin/drmservice', disabling 'drmservice'
  372. [ 7.171324] init: cannot find '/system/bin/akmd', disabling 'akmd'
  373. [ 7.180634] vpu: power on
  374. [ 7.180681] VPU_SERVICE: checking hw id 4831
  375. [ 7.181117] vpu: power off...done
  376. [ 7.181149] VPU_SERVICE: init success
  377. [ 7.183847] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  378. [ 7.183894] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  379. [ 7.184518] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  380. [ 7.286876] android_usb: already disabled
  381. [ 7.287441] android_usb: already disabled
  382. [ 7.287645] mtp_bind_config
  383. [ 7.366808] HDMI: hdmi_submit_work event 0101 delay 0
  384. [ 7.366858] HDMI:
  385. [ 7.366864] hdmi_work_queue() - evt= 1 1
  386. [ 7.366896] HDMI: hdmi_wq_remove
  387. [ 7.367119] HDMI: hdmi_submit_work event 0100 delay 0
  388. [ 7.390484] lcdc0 driver not found!shell@android:/ $
  389. [ 7.391134] HDMI: hdmi_work_queue() - exit
  390. [ 7.391140]
  391. [ 7.391171] HDMI:
  392. [ 7.391175] hdmi_work_queue() - evt= 1 0
  393. [ 7.391207] HDMI: hdmi_work_queue() - exit
  394. [ 7.391216]
  395. [ 7.436031] .416.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
  396. [ 7.460117] .447.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
  397. [ 7.470620] .416.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
  398. [ 7.478352] .416.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
  399. [ 8.143844] rk fb use 3 buffers
  400. [ 8.188266] rk30-lcdc rk30-lcdc.0: blank mode:0
  401. [ 9.585393] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  402. [ 10.040501] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  403. [ 10.078124] alarm_set_rtc: no RTC, time will be lost on reboot
  404. [ 12.592476] request_suspend_state: wakeup (3->0) at 12537145837 (1970-01-02 00:00:02.514359458 UTC)
  405. [ 13.375492] alarm_release: clear alarm, pending 0
  406. [ 13.380227] alarm_release: clear alarm, pending 0
  407. [ 13.715690] request_suspend_state: wakeup (0->0) at 13660361754 (1970-01-02 00:00:03.637575374 UTC)
  408. [ 13.718336] init: untracked pid 98 exited
  409. [ 13.729554] init: untracked pid 92 exited
  410. [ 15.093456] request_suspend_state: wakeup (0->0) at 15038127713 (1970-01-02 00:00:05.015340750 UTC)
  411. [ 15.885502] alarm_release: clear alarm, pending 0
  412. [ 15.885532] alarm_release: clear alarm, pending 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!