Guest User

smartctl -a -d ata /dev/sd[bcde]

a guest
May 1st, 2020
139
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ###################################
  2. ### smartctl -a -d ata /dev/sdb ###
  3. ###################################
  4.  
  5. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.18-3-pve] (local build)
  6. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  7.  
  8. === START OF INFORMATION SECTION ===
  9. Model Family: Western Digital Red
  10. Device Model: WDC WD40EFRX-68N32N0
  11. Serial Number: WD-WCC7K3EVZ75U
  12. LU WWN Device Id: 5 0014ee 2bac282f1
  13. Firmware Version: 82.00A82
  14. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  15. Sector Sizes: 512 bytes logical, 4096 bytes physical
  16. Rotation Rate: 5400 rpm
  17. Form Factor: 3.5 inches
  18. Device is: In smartctl database [for details use: -P show]
  19. ATA Version is: ACS-3 T13/2161-D revision 5
  20. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  21. Local Time is: Fri May 1 19:04:10 2020 CEST
  22. SMART support is: Available - device has SMART capability.
  23. SMART support is: Enabled
  24.  
  25. === START OF READ SMART DATA SECTION ===
  26. SMART overall-health self-assessment test result: PASSED
  27.  
  28. General SMART Values:
  29. Offline data collection status: (0x00) Offline data collection activity
  30. was never started.
  31. Auto Offline Data Collection: Disabled.
  32. Self-test execution status: ( 0) The previous self-test routine completed
  33. without error or no self-test has ever
  34. been run.
  35. Total time to complete Offline
  36. data collection: (43440) seconds.
  37. Offline data collection
  38. capabilities: (0x7b) SMART execute Offline immediate.
  39. Auto Offline data collection on/off support.
  40. Suspend Offline collection upon new
  41. command.
  42. Offline surface scan supported.
  43. Self-test supported.
  44. Conveyance Self-test supported.
  45. Selective Self-test supported.
  46. SMART capabilities: (0x0003) Saves SMART data before entering
  47. power-saving mode.
  48. Supports SMART auto save timer.
  49. Error logging capability: (0x01) Error logging supported.
  50. General Purpose Logging supported.
  51. Short self-test routine
  52. recommended polling time: ( 2) minutes.
  53. Extended self-test routine
  54. recommended polling time: ( 462) minutes.
  55. Conveyance self-test routine
  56. recommended polling time: ( 5) minutes.
  57. SCT capabilities: (0x303d) SCT Status supported.
  58. SCT Error Recovery Control supported.
  59. SCT Feature Control supported.
  60. SCT Data Table supported.
  61.  
  62. SMART Attributes Data Structure revision number: 16
  63. Vendor Specific SMART Attributes with Thresholds:
  64. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  65. 1 Raw_Read_Error_Rate 0x002f 200 190 051 Pre-fail Always - 0
  66. 3 Spin_Up_Time 0x0027 164 164 021 Pre-fail Always - 6800
  67. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 35
  68. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  69. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  70. 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9577
  71. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  72. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  73. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35
  74. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9
  75. 193 Load_Cycle_Count 0x0032 197 197 000 Old_age Always - 9343
  76. 194 Temperature_Celsius 0x0022 117 100 000 Old_age Always - 33
  77. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  78. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  79. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  80. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  81. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  82.  
  83. SMART Error Log Version: 1
  84. No Errors Logged
  85.  
  86. SMART Self-test log structure revision number 1
  87. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  88.  
  89. SMART Selective self-test log data structure revision number 1
  90. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  91. 1 0 0 Not_testing
  92. 2 0 0 Not_testing
  93. 3 0 0 Not_testing
  94. 4 0 0 Not_testing
  95. 5 0 0 Not_testing
  96. Selective self-test flags (0x0):
  97. After scanning selected spans, do NOT read-scan remainder of disk.
  98. If Selective self-test is pending on power-up, resume after 0 minute delay.
  99.  
  100.  
  101.  
  102.  
  103.  
  104. ###################################
  105. ### smartctl -a -d ata /dev/sdc ###
  106. ###################################
  107.  
  108. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.18-3-pve] (local build)
  109. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  110.  
  111. === START OF INFORMATION SECTION ===
  112. Model Family: Western Digital Red
  113. Device Model: WDC WD40EFRX-68N32N0
  114. Serial Number: WD-WCC7K0VJ5VC2
  115. LU WWN Device Id: 5 0014ee 2bac27b44
  116. Firmware Version: 82.00A82
  117. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  118. Sector Sizes: 512 bytes logical, 4096 bytes physical
  119. Rotation Rate: 5400 rpm
  120. Form Factor: 3.5 inches
  121. Device is: In smartctl database [for details use: -P show]
  122. ATA Version is: ACS-3 T13/2161-D revision 5
  123. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  124. Local Time is: Fri May 1 19:04:14 2020 CEST
  125. SMART support is: Available - device has SMART capability.
  126. SMART support is: Enabled
  127.  
  128. === START OF READ SMART DATA SECTION ===
  129. SMART overall-health self-assessment test result: PASSED
  130.  
  131. General SMART Values:
  132. Offline data collection status: (0x00) Offline data collection activity
  133. was never started.
  134. Auto Offline Data Collection: Disabled.
  135. Self-test execution status: ( 0) The previous self-test routine completed
  136. without error or no self-test has ever
  137. been run.
  138. Total time to complete Offline
  139. data collection: (44160) seconds.
  140. Offline data collection
  141. capabilities: (0x7b) SMART execute Offline immediate.
  142. Auto Offline data collection on/off support.
  143. Suspend Offline collection upon new
  144. command.
  145. Offline surface scan supported.
  146. Self-test supported.
  147. Conveyance Self-test supported.
  148. Selective Self-test supported.
  149. SMART capabilities: (0x0003) Saves SMART data before entering
  150. power-saving mode.
  151. Supports SMART auto save timer.
  152. Error logging capability: (0x01) Error logging supported.
  153. General Purpose Logging supported.
  154. Short self-test routine
  155. recommended polling time: ( 2) minutes.
  156. Extended self-test routine
  157. recommended polling time: ( 468) minutes.
  158. Conveyance self-test routine
  159. recommended polling time: ( 5) minutes.
  160. SCT capabilities: (0x303d) SCT Status supported.
  161. SCT Error Recovery Control supported.
  162. SCT Feature Control supported.
  163. SCT Data Table supported.
  164.  
  165. SMART Attributes Data Structure revision number: 16
  166. Vendor Specific SMART Attributes with Thresholds:
  167. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  168. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  169. 3 Spin_Up_Time 0x0027 164 164 021 Pre-fail Always - 6758
  170. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 35
  171. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  172. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  173. 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9578
  174. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  175. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  176. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 35
  177. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9
  178. 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7408
  179. 194 Temperature_Celsius 0x0022 116 098 000 Old_age Always - 34
  180. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  181. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  182. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  183. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 7
  184. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  185.  
  186. SMART Error Log Version: 1
  187. No Errors Logged
  188.  
  189. SMART Self-test log structure revision number 1
  190. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  191.  
  192. SMART Selective self-test log data structure revision number 1
  193. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  194. 1 0 0 Not_testing
  195. 2 0 0 Not_testing
  196. 3 0 0 Not_testing
  197. 4 0 0 Not_testing
  198. 5 0 0 Not_testing
  199. Selective self-test flags (0x0):
  200. After scanning selected spans, do NOT read-scan remainder of disk.
  201. If Selective self-test is pending on power-up, resume after 0 minute delay.
  202.  
  203.  
  204.  
  205.  
  206.  
  207. ###################################
  208. ### smartctl -a -d ata /dev/sdd ###
  209. ###################################
  210.  
  211. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.18-3-pve] (local build)
  212. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  213.  
  214. === START OF INFORMATION SECTION ===
  215. Model Family: Western Digital Red
  216. Device Model: WDC WD40EFRX-68N32N0
  217. Serial Number: WD-WCC7K5DLETVX
  218. LU WWN Device Id: 5 0014ee 2651ac148
  219. Firmware Version: 82.00A82
  220. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  221. Sector Sizes: 512 bytes logical, 4096 bytes physical
  222. Rotation Rate: 5400 rpm
  223. Form Factor: 3.5 inches
  224. Device is: In smartctl database [for details use: -P show]
  225. ATA Version is: ACS-3 T13/2161-D revision 5
  226. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  227. Local Time is: Fri May 1 19:04:20 2020 CEST
  228. SMART support is: Available - device has SMART capability.
  229. SMART support is: Enabled
  230.  
  231. === START OF READ SMART DATA SECTION ===
  232. SMART overall-health self-assessment test result: PASSED
  233.  
  234. General SMART Values:
  235. Offline data collection status: (0x00) Offline data collection activity
  236. was never started.
  237. Auto Offline Data Collection: Disabled.
  238. Self-test execution status: ( 0) The previous self-test routine completed
  239. without error or no self-test has ever
  240. been run.
  241. Total time to complete Offline
  242. data collection: (44640) seconds.
  243. Offline data collection
  244. capabilities: (0x7b) SMART execute Offline immediate.
  245. Auto Offline data collection on/off support.
  246. Suspend Offline collection upon new
  247. command.
  248. Offline surface scan supported.
  249. Self-test supported.
  250. Conveyance Self-test supported.
  251. Selective Self-test supported.
  252. SMART capabilities: (0x0003) Saves SMART data before entering
  253. power-saving mode.
  254. Supports SMART auto save timer.
  255. Error logging capability: (0x01) Error logging supported.
  256. General Purpose Logging supported.
  257. Short self-test routine
  258. recommended polling time: ( 2) minutes.
  259. Extended self-test routine
  260. recommended polling time: ( 473) minutes.
  261. Conveyance self-test routine
  262. recommended polling time: ( 5) minutes.
  263. SCT capabilities: (0x303d) SCT Status supported.
  264. SCT Error Recovery Control supported.
  265. SCT Feature Control supported.
  266. SCT Data Table supported.
  267.  
  268. SMART Attributes Data Structure revision number: 16
  269. Vendor Specific SMART Attributes with Thresholds:
  270. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  271. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  272. 3 Spin_Up_Time 0x0027 164 163 021 Pre-fail Always - 6775
  273. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 92
  274. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  275. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  276. 9 Power_On_Hours 0x0032 076 076 000 Old_age Always - 18035
  277. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  278. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  279. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 92
  280. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 17
  281. 193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 17330
  282. 194 Temperature_Celsius 0x0022 120 101 000 Old_age Always - 30
  283. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  284. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  285. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  286. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
  287. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  288.  
  289. SMART Error Log Version: 1
  290. No Errors Logged
  291.  
  292. SMART Self-test log structure revision number 1
  293. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  294.  
  295. SMART Selective self-test log data structure revision number 1
  296. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  297. 1 0 0 Not_testing
  298. 2 0 0 Not_testing
  299. 3 0 0 Not_testing
  300. 4 0 0 Not_testing
  301. 5 0 0 Not_testing
  302. Selective self-test flags (0x0):
  303. After scanning selected spans, do NOT read-scan remainder of disk.
  304. If Selective self-test is pending on power-up, resume after 0 minute delay.
  305.  
  306.  
  307.  
  308.  
  309.  
  310. ###################################
  311. ### smartctl -a -d ata /dev/sde ###
  312. ###################################
  313.  
  314. smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.3.18-3-pve] (local build)
  315. Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
  316.  
  317. === START OF INFORMATION SECTION ===
  318. Model Family: Western Digital Red
  319. Device Model: WDC WD40EFRX-68N32N0
  320. Serial Number: WD-WCC7K3ZVCJUY
  321. LU WWN Device Id: 5 0014ee 210172bd3
  322. Firmware Version: 82.00A82
  323. User Capacity: 4,000,787,030,016 bytes [4.00 TB]
  324. Sector Sizes: 512 bytes logical, 4096 bytes physical
  325. Rotation Rate: 5400 rpm
  326. Form Factor: 3.5 inches
  327. Device is: In smartctl database [for details use: -P show]
  328. ATA Version is: ACS-3 T13/2161-D revision 5
  329. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  330. Local Time is: Fri May 1 19:04:40 2020 CEST
  331. SMART support is: Available - device has SMART capability.
  332. SMART support is: Enabled
  333.  
  334. === START OF READ SMART DATA SECTION ===
  335. SMART overall-health self-assessment test result: PASSED
  336.  
  337. General SMART Values:
  338. Offline data collection status: (0x00) Offline data collection activity
  339. was never started.
  340. Auto Offline Data Collection: Disabled.
  341. Self-test execution status: ( 0) The previous self-test routine completed
  342. without error or no self-test has ever
  343. been run.
  344. Total time to complete Offline
  345. data collection: (44040) seconds.
  346. Offline data collection
  347. capabilities: (0x7b) SMART execute Offline immediate.
  348. Auto Offline data collection on/off support.
  349. Suspend Offline collection upon new
  350. command.
  351. Offline surface scan supported.
  352. Self-test supported.
  353. Conveyance Self-test supported.
  354. Selective Self-test supported.
  355. SMART capabilities: (0x0003) Saves SMART data before entering
  356. power-saving mode.
  357. Supports SMART auto save timer.
  358. Error logging capability: (0x01) Error logging supported.
  359. General Purpose Logging supported.
  360. Short self-test routine
  361. recommended polling time: ( 2) minutes.
  362. Extended self-test routine
  363. recommended polling time: ( 467) minutes.
  364. Conveyance self-test routine
  365. recommended polling time: ( 5) minutes.
  366. SCT capabilities: (0x303d) SCT Status supported.
  367. SCT Error Recovery Control supported.
  368. SCT Feature Control supported.
  369. SCT Data Table supported.
  370.  
  371. SMART Attributes Data Structure revision number: 16
  372. Vendor Specific SMART Attributes with Thresholds:
  373. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  374. 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
  375. 3 Spin_Up_Time 0x0027 163 163 021 Pre-fail Always - 6850
  376. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 37
  377. 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
  378. 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
  379. 9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9577
  380. 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  381. 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
  382. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 37
  383. 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 12
  384. 193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 7421
  385. 194 Temperature_Celsius 0x0022 118 099 000 Old_age Always - 32
  386. 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
  387. 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
  388. 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
  389. 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 1
  390. 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
  391.  
  392. SMART Error Log Version: 1
  393. No Errors Logged
  394.  
  395. SMART Self-test log structure revision number 1
  396. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  397.  
  398. SMART Selective self-test log data structure revision number 1
  399. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  400. 1 0 0 Not_testing
  401. 2 0 0 Not_testing
  402. 3 0 0 Not_testing
  403. 4 0 0 Not_testing
  404. 5 0 0 Not_testing
  405. Selective self-test flags (0x0):
  406. After scanning selected spans, do NOT read-scan remainder of disk.
  407. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data