Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- OK
- U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 880MHz
- DRAM: 2 GiB
- PMIC VERSION : 0x00, CHIP REV : 3
- TrustZone Enabled BSP
- BL1 version: 20121128
- Checking Boot Mode ... EMMC4.41
- REVISION: 2.0
- Manufacturer TOSHIBA [ 7456MB ]
- NAME: S5P_MSHC4
- MMC Device 0: 7456 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- *** Warning - using default environment
- USB3503 NINT = OUTPUT LOW!
- ModeKey Check... run normal_boot
- No ethernet found.
- Hit any key to stop autoboot: 1 0
- do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- reading boot.ini
- ** Unable to read file boot.ini **
- NAME: S5P_MSHC4
- NAME: S5P_MSHC4
- >>> Load Boot Script from mmc 0:1 <<<
- reading boot.scr
- Warning : Reads a file that is smaller than the cluster size.
- 380 bytes read in 32 ms (10.7 KiB/s)
- ## Executing script at 40008000
- reading zImage
- 2352272 bytes read in 48 ms (46.7 MiB/s)
- reading uInitrd
- 2127570 bytes read in 21 ms (96.6 MiB/s)
- Boot with zImage
- ## Loading init Ramdisk from Legacy Image at 42000000 ...
- Image Name: uInitrd 3.8.13.30
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 2127506 Bytes = 2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [ 0.000000] Kernel was built at commit id 'db41cd1'
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROID-U2/U3
- [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] audiocdclk: no parent clock specified
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [ 0.000000] Running under secure firmware.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2047MB = 2047MB total
- [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.005629] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.050060] pid_max: default: 32768 minimum: 301
- [ 0.050337] Mount-cache hash table entries: 512
- [ 0.051314] Initializing cgroup subsys cpuacct
- [ 0.051349] Initializing cgroup subsys memory
- [ 0.051407] Initializing cgroup subsys devices
- [ 0.051429] Initializing cgroup subsys freezer
- [ 0.051449] Initializing cgroup subsys perf_event
- [ 0.051573] CPU: Testing write buffer coherency: ok
- [ 0.051903] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.052023] Setting up static identity map for 0x40426850 - 0x404268a8
- [ 0.052097] L310 cache controller enabled
- [ 0.052123] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.102266] CPU1: Booted secondary processor
- [ 0.121956] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.132256] CPU2: Booted secondary processor
- [ 0.151956] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.162267] CPU3: Booted secondary processor
- [ 0.181956] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.181993] Brought up 4 CPUs
- [ 0.182066] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.182895] devtmpfs: initialized
- [ 0.188632] regulator-dummy: no parameters
- [ 0.196019] NET: Registered protocol family 16
- [ 0.203680] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.205620] s5p_hdmi_cec_set_platdata()
- [ 0.207410] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.207432] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.207527] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.207614] EXYNOS4x12 PMU Initialize
- [ 0.208436] EXYNOS: Initializing architecture
- [ 0.208828] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [ 0.208905] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [ 0.212990] bio: create slab <bio-0> at 0
- [ 0.213327] hdmi_5v: 5000 mV
- [ 0.213682] SCSI subsystem initialized
- [ 0.213848] usbcore: registered new interface driver usbfs
- [ 0.213902] usbcore: registered new interface driver hub
- [ 0.213987] usbcore: registered new device driver usb
- [ 0.214249] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [ 0.214359] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.214381] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [ 0.214773] max77686 0-0009: device found
- [ 0.216526] LDO1 VDD_ALIVE: 1000 mV
- [ 0.218095] LDO2 VDDQ_M1_1V8: 1800 mV
- [ 0.219488] LDO3 VDDQ_AUD_1V8: 1800 mV
- [ 0.220899] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [ 0.222305] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [ 0.223864] LDO6 VDD10_MPLL_1V0: 1000 mV
- [ 0.225392] LDO7 VDD10_EPLL_1V0: 1000 mV
- [ 0.226779] LDO8 VDD10_MIPI_1V0: 1000 mV
- [ 0.228124] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [ 0.228143] LDO9 VT_CORE_1V0: 1000 mV
- [ 0.229532] LDO10 VDD18_MIPI_1V8: 1800 mV
- [ 0.230922] LDO11 VDD18_ABB1_1V8: 1800 mV
- [ 0.231839] vdd_ldo12 range: 3300 mV
- [ 0.233223] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [ 0.234625] LDO14 VDD18_ADC_1V8: 1800 mV
- [ 0.235540] vdd_ldo15 range: 1000 mV
- [ 0.236931] LDO16 VDD18_HSIC: 1800 mV
- [ 0.238423] LDO17 VDDQ_CAM_1V8: 1800 mV
- [ 0.239607] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [ 0.239626] LDO18 VDDQ_ISP_1V8: 1800 mV
- [ 0.240181] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [ 0.240199] LDO19 VT_CAM_1V8: 1800 mV
- [ 0.241119] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [ 0.242452] LDO21 TFLASH_2V8: 2800 mV
- [ 0.243943] vddf_emmc_2V85: 2850 mV
- [ 0.245275] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [ 0.245294] LDO23 VDD_TOUCH_2V8: 2800 mV
- [ 0.246639] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [ 0.246658] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [ 0.248163] LDO25 VDDQ_LCD_3V0: 1800 mV
- [ 0.249339] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [ 0.249357] LDO26 VDD_MOTOR_3V0: 3000 mV
- [ 0.249911] BUCK1 vdd_mif: 1100 mV
- [ 0.250675] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [ 0.251243] BUCK3 vdd_int: 1125 mV
- [ 0.252006] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [ 0.253405] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [ 0.254784] BUCK6 1V35: 1350 mV
- [ 0.256178] BUCK7 2V0: 2000 mV
- [ 0.256736] ODROIDU2: Regulator BUCK8
- [ 0.377754] BUCK8 3V0: 3300 mV
- [ 0.378935] BUCK9 1V2: ODROIDU2: Disabled regulator
- [ 0.378945] BUCK9 1V2: 1200 mV
- [ 0.379349] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.379415] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.379437] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [ 0.379592] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.379653] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 0.379674] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [ 0.379774] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.379830] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [ 0.379851] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [ 0.379945] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [ 0.380007] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.380028] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [ 0.380182] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.380236] media: Linux media interface: v0.10
- [ 0.380282] Linux video capture interface: v2.00
- [ 0.380514] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.381120] Switching to clocksource mct-frc
- [ 0.387893] NET: Registered protocol family 2
- [ 0.388355] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.388487] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.388628] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.388691] TCP: reno registered
- [ 0.388712] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388755] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388995] NET: Registered protocol family 1
- [ 0.389167] Trying to unpack rootfs image as initramfs...
- [ 0.493441] Freeing initrd memory: 2076K
- [ 0.493647] CPU PMU: probing PMU on CPU 0
- [ 0.493676] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.494869] bounce pool size: 64 pages
- [ 0.500771] msgmni has been set to 1471
- [ 0.501805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.501829] io scheduler noop registered
- [ 0.501843] io scheduler deadline registered
- [ 0.501991] io scheduler cfq registered (default)
- [ 0.510131] SoftPWM v0.2-acme initializing.
- [ 0.510146] Clock resolution is 1ns
- [ 0.510178] SoftPWM initialized.
- [ 0.512723] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.512748] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.514959] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.514983] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.515767] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.515789] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.556317] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.556559] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.574717] console [ttySAC1] enabled
- [ 1.578574] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.586310] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.594121] [drm] Initialized drm 1.1.0 20060810
- [ 1.598733] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [ 1.604881] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [ 1.611858] exynos-mixer s5p-mixer: probe start
- [ 1.616472] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [ 1.623554] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.629541] [drm] No driver support for vblank timestamp query.
- [ 1.701544] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 709 ns
- [ 1.702145] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 591750 ns
- [ 1.702160] exynos-mixer s5p-mixer: start latency exceeded, new value 417 ns
- [ 1.702198] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31833 ns
- [ 1.785593] Console: switching to colour frame buffer device 240x67
- [ 1.835495] exynos-drm exynos-drm: fb0: frame buffer device
- [ 1.841122] exynos-drm exynos-drm: registered panic notifier
- [ 1.846764] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [ 1.852649] mali-utgard mali-utgard.0: start latency exceeded, new value 459 ns
- [ 1.859889] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3416 ns
- [ 1.869281] Mali: init_mali_clock mali_clock c0605c68
- [ 1.875161] mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns
- [ 1.880273] mali-utgard mali-utgard.0: state save latency exceeded, new value 2375 ns
- [ 1.888312] pd-g3d: Power-off latency exceeded, new value 233916 ns
- [ 1.894338] Mali: Mali device driver loaded
- [ 1.903792] brd: module loaded
- [ 1.906800] loop: module loaded
- [ 1.907001] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.911328] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.916329] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.923774] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.936187] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [ 1.936389] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.942832] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.950034] usb usb1: Product: S5P EHCI Host Controller
- [ 1.955206] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [ 1.960849] usb usb1: SerialNumber: s5p-ehci
- [ 1.965453] hub 1-0:1.0: USB hub found
- [ 1.968814] hub 1-0:1.0: 3 ports detected
- [ 1.973095] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.979062] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.984355] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.990358] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 2.002571] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 2.065243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.071225] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.078406] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 2.083843] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [ 2.089482] usb usb2: SerialNumber: exynos-ohci
- [ 2.094607] hub 2-0:1.0: USB hub found
- [ 2.099355] hub 2-0:1.0: 3 ports detected
- [ 2.104351] Initializing USB Mass Storage driver...
- [ 2.109125] usbcore: registered new interface driver usb-storage
- [ 2.114206] USB Mass Storage support registered.
- [ 2.236425] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [ 2.281193] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 2.346190] usb3503 0-0008: switched to HUB mode
- [ 2.350777] usb3503 0-0008: usb3503_probe: probed on hub mode
- [ 2.376346] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [ 2.381496] s3c-hsotg s3c-hsotg: Already power on PHY
- [ 2.386019] s3c-hsotg s3c-hsotg: EPs:15
- [ 2.390461] s3c-hsotg s3c-hsotg: dedicated fifos
- [ 2.395167] max77686-rtc max77686-rtc: max77686_rtc_probe
- [ 2.416548] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [ 2.421942] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.501819] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 2.510245] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [ 2.515019] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 667 ns
- [ 2.522108] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16791 ns
- [ 2.530089] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 416 ns
- [ 2.537052] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3083 ns
- [ 2.541251] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [ 2.550615] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [ 2.557656] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 542 ns
- [ 2.564743] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15250 ns
- [ 2.572730] s5p-fimc exynos4-fimc.1: stop latOK
- U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 880MHz
- DRAM: 2 GiB
- PMIC VERSION : 0x00, CHIP REV : 3
- TrustZone Enabled BSP
- BL1 version: 20121128
- Checking Boot Mode ... EMMC4.41
- REVISION: 2.0
- Manufacturer TOSHIBA [ 7456MB ]
- NAME: S5P_MSHC4
- MMC Device 0: 7456 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- *** Warning - using default environment
- USB3503 NINT = OUTPUT LOW!
- ModeKey Check... run normal_boot
- No ethernet found.
- Hit any key to stop autoboot: 1 0
- do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- reading boot.ini
- ** Unable to read file boot.ini **
- NAME: S5P_MSHC4
- NAME: S5P_MSHC4
- >>> Load Boot Script from mmc 0:1 <<<
- reading boot.scr
- Warning : Reads a file that is smaller than the cluster size.
- 380 bytes read in 32 ms (10.7 KiB/s)
- ## Executing script at 40008000
- reading zImage
- 2352272 bytes read in 47 ms (47.7 MiB/s)
- reading uInitrd
- 2127570 bytes read in 21 ms (96.6 MiB/s)
- Boot with zImage
- ## Loading init Ramdisk from Legacy Image at 42000000 ...
- Image Name: uInitrd 3.8.13.30
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 2127506 Bytes = 2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [ 0.000000] Kernel was built at commit id 'db41cd1'
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROID-U2/U3
- [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] audiocdclk: no parent clock specified
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [ 0.000000] Running under secure firmware.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2047MB = 2047MB total
- [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.005622] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.050060] pid_max: default: 32768 minimum: 301
- [ 0.050337] Mount-cache hash table entries: 512
- [ 0.051314] Initializing cgroup subsys cpuacct
- [ 0.051351] Initializing cgroup subsys memory
- [ 0.051406] Initializing cgroup subsys devices
- [ 0.051419] Initializing cgroup subsys freezer
- [ 0.051440] Initializing cgroup subsys perf_event
- [ 0.051567] CPU: Testing write buffer coherency: ok
- [ 0.051902] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.052021] Setting up static identity map for 0x40426850 - 0x404268a8
- [ 0.052093] L310 cache controller enabled
- [ 0.052119] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.102268] CPU1: Booted secondary processor
- [ 0.121954] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.132257] CPU2: Booted secondary processor
- [ 0.151954] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.162265] CPU3: Booted secondary processor
- [ 0.181954] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.181989] Brought up 4 CPUs
- [ 0.182059] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.182885] devtmpfs: initialized
- [ 0.188636] regulator-dummy: no parameters
- [ 0.196028] NET: Registered protocol family 16
- [ 0.203665] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.205611] s5p_hdmi_cec_set_platdata()
- [ 0.207400] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.207423] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.207517] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.207605] EXYNOS4x12 PMU Initialize
- [ 0.208426] EXYNOS: Initializing architecture
- [ 0.208819] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [ 0.208893] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [ 0.212973] bio: create slab <bio-0> at 0
- [ 0.213308] hdmi_5v: 5000 mV
- [ 0.213660] SCSI subsystem initialized
- [ 0.213826] usbcore: registered new interface driver usbfs
- [ 0.213880] usbcore: registered new interface driver hub
- [ 0.213964] usbcore: registered new device driver usb
- [ 0.214226] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [ 0.214334] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.214357] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [ 0.214747] max77686 0-0009: device found
- [ 0.216499] LDO1 VDD_ALIVE: 1000 mV
- [ 0.218070] LDO2 VDDQ_M1_1V8: 1800 mV
- [ 0.219461] LDO3 VDDQ_AUD_1V8: 1800 mV
- [ 0.220870] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [ 0.222266] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [ 0.223827] LDO6 VDD10_MPLL_1V0: 1000 mV
- [ 0.225360] LDO7 VDD10_EPLL_1V0: 1000 mV
- [ 0.226746] LDO8 VDD10_MIPI_1V0: 1000 mV
- [ 0.228085] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [ 0.228103] LDO9 VT_CORE_1V0: 1000 mV
- [ 0.229493] LDO10 VDD18_MIPI_1V8: 1800 mV
- [ 0.230881] LDO11 VDD18_ABB1_1V8: 1800 mV
- [ 0.231799] vdd_ldo12 range: 3300 mV
- [ 0.233174] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [ 0.234575] LDO14 VDD18_ADC_1V8: 1800 mV
- [ 0.235489] vdd_ldo15 range: 1000 mV
- [ 0.236878] LDO16 VDD18_HSIC: 1800 mV
- [ 0.238363] LDO17 VDDQ_CAM_1V8: 1800 mV
- [ 0.239546] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [ 0.239565] LDO18 VDDQ_ISP_1V8: 1800 mV
- [ 0.240121] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [ 0.240139] LDO19 VT_CAM_1V8: 1800 mV
- [ 0.241058] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [ 0.242381] LDO21 TFLASH_2V8: 2800 mV
- [ 0.243870] vddf_emmc_2V85: 2850 mV
- [ 0.245199] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [ 0.245217] LDO23 VDD_TOUCH_2V8: 2800 mV
- [ 0.246554] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [ 0.246572] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [ 0.248061] LDO25 VDDQ_LCD_3V0: 1800 mV
- [ 0.249236] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [ 0.249254] LDO26 VDD_MOTOR_3V0: 3000 mV
- [ 0.249807] BUCK1 vdd_mif: 1100 mV
- [ 0.250571] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [ 0.251137] BUCK3 vdd_int: 1125 mV
- [ 0.251898] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [ 0.253289] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [ 0.254676] BUCK6 1V35: 1350 mV
- [ 0.256068] BUCK7 2V0: 2000 mV
- [ 0.256626] ODROIDU2: Regulator BUCK8
- [ 0.377636] BUCK8 3V0: 3300 mV
- [ 0.378817] BUCK9 1V2: ODROIDU2: Disabled regulator
- [ 0.378835] BUCK9 1V2: 1200 mV
- [ 0.379238] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.379302] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.379324] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [ 0.379479] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.379541] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 0.379562] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [ 0.379661] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.379717] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [ 0.379737] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [ 0.379830] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [ 0.379894] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.379915] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [ 0.380069] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.380125] media: Linux media interface: v0.10
- [ 0.380170] Linux video capture interface: v2.00
- [ 0.380404] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.381011] Switching to clocksource mct-frc
- [ 0.387802] NET: Registered protocol family 2
- [ 0.388261] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.388391] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.388531] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.388592] TCP: reno registered
- [ 0.388613] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388656] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388903] NET: Registered protocol family 1
- [ 0.389078] Trying to unpack rootfs image as initramfs...
- [ 0.493315] Freeing initrd memory: 2076K
- [ 0.493522] CPU PMU: probing PMU on CPU 0
- [ 0.493550] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.494747] bounce pool size: 64 pages
- [ 0.500664] msgmni has been set to 1471
- [ 0.501699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.501724] io scheduler noop registered
- [ 0.501738] io scheduler deadline registered
- [ 0.501889] io scheduler cfq registered (default)
- [ 0.507066] SoftPWM v0.2-acme initializing.
- [ 0.507081] Clock resolution is 1ns
- [ 0.507114] SoftPWM initialized.
- [ 0.509637] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.509662] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.511901] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.511924] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.512714] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.512737] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.553242] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.553479] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.571631] console [ttySAC1] enabled
- [ 1.575475] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.583209] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.591036] [drm] Initialized drm 1.1.0 20060810
- [ 1.595649] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [ 1.601793] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [ 1.608779] exynos-mixer s5p-mixer: probe start
- [ 1.613382] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [ 1.620472] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.626454] [drm] No driver support for vblank timestamp query.
- [ 1.698441] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 667 ns
- [ 1.699041] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 590584 ns
- [ 1.699056] exynos-mixer s5p-mixer: start latency exceeded, new value 458 ns
- [ 1.699093] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31542 ns
- [ 1.781351] Console: switching to colour frame buffer device 240x67
- [ 1.831230] exynos-drm exynos-drm: fb0: frame buffer device
- [ 1.836856] exynos-drm exynos-drm: registered panic notifier
- [ 1.842498] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [ 1.848385] mali-utgard mali-utgard.0: start latency exceeded, new value 417 ns
- [ 1.855622] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3209 ns
- [ 1.865022] Mali: init_mali_clock mali_clock c0605c68
- [ 1.870899] mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns
- [ 1.876008] mali-utgard mali-utgard.0: state save latency exceeded, new value 2250 ns
- [ 1.884046] pd-g3d: Power-off latency exceeded, new value 232917 ns
- [ 1.890073] Mali: Mali device driver loaded
- [ 1.899523] brd: module loaded
- [ 1.902533] loop: module loaded
- [ 1.902735] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.907058] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.912064] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.919509] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.931078] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [ 1.931279] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.937717] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.944917] usb usb1: Product: S5P EHCI Host Controller
- [ 1.950090] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [ 1.955733] usb usb1: SerialNumber: s5p-ehci
- [ 1.960335] hub 1-0:1.0: USB hub found
- [ 1.963698] hub 1-0:1.0: 3 ports detected
- [ 1.967978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.973945] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.979239] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.985240] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 1.997448] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 2.060136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.066111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.073288] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 2.078724] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [ 2.084363] usb usb2: SerialNumber: exynos-ohci
- [ 2.089476] hub 2-0:1.0: USB hub found
- [ 2.094213] hub 2-0:1.0: 3 ports detected
- [ 2.099196] Initializing USB Mass Storage driver...
- [ 2.103955] usbcore: registered new interface driver usb-storage
- [ 2.109033] USB Mass Storage support registered.
- [ 2.231318] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [ 2.276088] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 2.341081] usb3503 0-0008: switched to HUB mode
- [ 2.345657] usb3503 0-0008: usb3503_probe: probed on hub mode
- [ 2.371237] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [ 2.376387] s3c-hsotg s3c-hsotg: Already power on PHY
- [ 2.380897] s3c-hsotg s3c-hsotg: EPs:15
- [ 2.385320] s3c-hsotg s3c-hsotg: dedicated fifos
- [ 2.390011] max77686-rtc max77686-rtc: max77686_rtc_probe
- [ 2.411389] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [ 2.416770] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.496708] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 2.505118] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [ 2.509877] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 583 ns
- [ 2.516966] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16375 ns
- [ 2.524933] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 458 ns
- [ 2.531917] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3083 ns
- [ 2.536143] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [ 2.545471] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [ 2.552524] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 542 ns
- [ 2.559607] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15333 ns
- [ 2.567593] s5p-fimc exynos4-fimc.1: st\EFOK
- U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 880MHz
- DRAM: 2 GiB
- PMIC VERSION : 0x00, CHIP REV : 2
- TrustZone Enabled BSP
- BL1 version: 20121128
- Checking Boot Mode ... EMMC4.41
- REVISION: 2.0
- Manufacturer TOSHIBA [ 7456MB ]
- NAME: S5P_MSHC4
- MMC Device 0: 7456 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- *** Warning - using default environment
- USB3503 NINT = OUTPUT LOW!
- ModeKey Check... run normal_boot
- No ethernet found.
- Hit any key to stop autoboot: 1 0
- do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- reading boot.ini
- ** Unable to read file boot.ini **
- NAME: S5P_MSHC4
- NAME: S5P_MSHC4
- >>> Load Boot Script from mmc 0:1 <<<
- reading boot.scr
- Warning : Reads a file that is smaller than the cluster size.
- 380 bytes read in 33 ms (10.7 KiB/s)
- ## Executing script at 40008000
- reading zImage
- 2352272 bytes read in 47 ms (47.7 MiB/s)
- reading uInitrd
- 2127570 bytes read in 21 ms (96.6 MiB/s)
- Boot with zImage
- ## Loading init Ramdisk from Legacy Image at 42000000 ...
- Image Name: uInitrd 3.8.13.30
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 2127506 Bytes = 2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [ 0.000000] Kernel was built at commit id 'db41cd1'
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROID-U2/U3
- [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] audiocdclk: no parent clock specified
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [ 0.000000] Running under secure firmware.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2047MB = 2047MB total
- [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.005622] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.050061] pid_max: default: 32768 minimum: 301
- [ 0.050342] Mount-cache hash table entries: 512
- [ 0.051312] Initializing cgroup subsys cpuacct
- [ 0.051347] Initializing cgroup subsys memory
- [ 0.051403] Initializing cgroup subsys devices
- [ 0.051425] Initializing cgroup subsys freezer
- [ 0.051443] Initializing cgroup subsys perf_event
- [ 0.051568] CPU: Testing write buffer coherency: ok
- [ 0.051900] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.052019] Setting up static identity map for 0x40426850 - 0x404268a8
- [ 0.052092] L310 cache controller enabled
- [ 0.052119] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.102264] CPU1: Booted secondary processor
- [ 0.121952] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.132252] CPU2: Booted secondary processor
- [ 0.151952] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.162265] CPU3: Booted secondary processor
- [ 0.181952] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.181988] Brought up 4 CPUs
- [ 0.182058] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.182883] devtmpfs: initialized
- [ 0.188652] regulator-dummy: no parameters
- [ 0.196041] NET: Registered protocol family 16
- [ 0.203652] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.205598] s5p_hdmi_cec_set_platdata()
- [ 0.207388] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.207410] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.207504] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.207593] EXYNOS4x12 PMU Initialize
- [ 0.208414] EXYNOS: Initializing architecture
- [ 0.208809] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [ 0.208883] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [ 0.212954] bio: create slab <bio-0> at 0
- [ 0.213294] hdmi_5v: 5000 mV
- [ 0.213649] SCSI subsystem initialized
- [ 0.213815] usbcore: registered new interface driver usbfs
- [ 0.213868] usbcore: registered new interface driver hub
- [ 0.213951] usbcore: registered new device driver usb
- [ 0.214216] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [ 0.214327] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.214349] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [ 0.214741] max77686 0-0009: device found
- [ 0.216492] LDO1 VDD_ALIVE: 1000 mV
- [ 0.218057] LDO2 VDDQ_M1_1V8: 1800 mV
- [ 0.219452] LDO3 VDDQ_AUD_1V8: 1800 mV
- [ 0.220863] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [ 0.222275] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [ 0.223835] LDO6 VDD10_MPLL_1V0: 1000 mV
- [ 0.225370] LDO7 VDD10_EPLL_1V0: 1000 mV
- [ 0.226750] LDO8 VDD10_MIPI_1V0: 1000 mV
- [ 0.228089] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [ 0.228107] LDO9 VT_CORE_1V0: 1000 mV
- [ 0.229494] LDO10 VDD18_MIPI_1V8: 1800 mV
- [ 0.230874] LDO11 VDD18_ABB1_1V8: 1800 mV
- [ 0.231791] vdd_ldo12 range: 3300 mV
- [ 0.233172] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [ 0.234573] LDO14 VDD18_ADC_1V8: 1800 mV
- [ 0.235488] vdd_ldo15 range: 1000 mV
- [ 0.236878] LDO16 VDD18_HSIC: 1800 mV
- [ 0.238360] LDO17 VDDQ_CAM_1V8: 1800 mV
- [ 0.239542] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [ 0.239561] LDO18 VDDQ_ISP_1V8: 1800 mV
- [ 0.240116] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [ 0.240134] LDO19 VT_CAM_1V8: 1800 mV
- [ 0.241053] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [ 0.242386] LDO21 TFLASH_2V8: 2800 mV
- [ 0.243874] vddf_emmc_2V85: 2850 mV
- [ 0.245203] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [ 0.245221] LDO23 VDD_TOUCH_2V8: 2800 mV
- [ 0.246565] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [ 0.246584] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [ 0.248075] LDO25 VDDQ_LCD_3V0: 1800 mV
- [ 0.249249] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [ 0.249268] LDO26 VDD_MOTOR_3V0: 3000 mV
- [ 0.249821] BUCK1 vdd_mif: 1100 mV
- [ 0.250584] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [ 0.251151] BUCK3 vdd_int: 1125 mV
- [ 0.251912] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [ 0.253310] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [ 0.254695] BUCK6 1V35: 1350 mV
- [ 0.256087] BUCK7 2V0: 2000 mV
- [ 0.256644] ODROIDU2: Regulator BUCK8
- [ 0.377653] BUCK8 3V0: 3300 mV
- [ 0.378834] BUCK9 1V2: ODROIDU2: Disabled regulator
- [ 0.378851] BUCK9 1V2: 1200 mV
- [ 0.379255] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.379321] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.379343] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [ 0.379498] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.379559] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 0.379580] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [ 0.379680] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.379735] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [ 0.379755] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [ 0.379848] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [ 0.379911] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.379932] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [ 0.380086] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.380140] media: Linux media interface: v0.10
- [ 0.380186] Linux video capture interface: v2.00
- [ 0.380419] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.381023] Switching to clocksource mct-frc
- [ 0.387817] NET: Registered protocol family 2
- [ 0.388281] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.388413] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.388562] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.388621] TCP: reno registered
- [ 0.388641] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388684] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388926] NET: Registered protocol family 1
- [ 0.389098] Trying to unpack rootfs image as initramfs...
- [ 0.493517] Freeing initrd memory: 2076K
- [ 0.493726] CPU PMU: probing PMU on CPU 0
- [ 0.493753] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.494954] bounce pool size: 64 pages
- [ 0.500803] msgmni has been set to 1471
- [ 0.501886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.501911] io scheduler noop registered
- [ 0.501924] io scheduler deadline registered
- [ 0.502074] io scheduler cfq registered (default)
- [ 0.507429] SoftPWM v0.2-acme initializing.
- [ 0.507444] Clock resolution is 1ns
- [ 0.507477] SoftPWM initialized.
- [ 0.509994] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.510019] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.512256] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.512279] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.513064] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.513086] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.553598] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.553837] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.571989] console [ttySAC1] enabled
- [ 1.575829] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.583569] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.591393] [drm] Initialized drm 1.1.0 20060810
- [ 1.595990] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [ 1.602152] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [ 1.609136] exynos-mixer s5p-mixer: probe start
- [ 1.613741] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [ 1.620820] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.626813] [drm] No driver support for vblank timestamp query.
- [ 1.698829] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 625 ns
- [ 1.699429] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 591333 ns
- [ 1.699445] exynos-mixer s5p-mixer: start latency exceeded, new value 458 ns
- [ 1.699482] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31666 ns
- [ 1.781351] Console: switching to colour frame buffer device 240x67
- [ 1.831233] exynos-drm exynos-drm: fb0: frame buffer device
- [ 1.836857] exynos-drm exynos-drm: registered panic notifier
- [ 1.842501] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [ 1.848388] mali-utgard mali-utgard.0: start latency exceeded, new value 417 ns
- [ 1.855625] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3416 ns
- [ 1.865022] Mali: init_mali_clock mali_clock c0605c68
- [ 1.870905] mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns
- [ 1.876011] mali-utgard mali-utgard.0: state save latency exceeded, new value 2209 ns
- [ 1.884046] pd-g3d: Power-off latency exceeded, new value 233750 ns
- [ 1.890074] Mali: Mali device driver loaded
- [ 1.899519] brd: module loaded
- [ 1.902525] loop: module loaded
- [ 1.902727] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.907062] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.912065] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.919509] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.931089] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [ 1.931293] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.937730] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.944930] usb usb1: Product: S5P EHCI Host Controller
- [ 1.950101] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [ 1.955745] usb usb1: SerialNumber: s5p-ehci
- [ 1.960348] hub 1-0:1.0: USB hub found
- [ 1.963709] hub 1-0:1.0: 3 ports detected
- [ 1.967988] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.973956] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.979250] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.985252] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 1.997461] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 2.060147] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.066124] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.073307] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 2.078743] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [ 2.084376] usb usb2: SerialNumber: exynos-ohci
- [ 2.089493] hub 2-0:1.0: USB hub found
- [ 2.094232] hub 2-0:1.0: 3 ports detected
- [ 2.099219] Initializing USB Mass Storage driver...
- [ 2.103982] usbcore: registered new interface driver usb-storage
- [ 2.109063] USB Mass Storage support registered.
- [ 2.231327] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [ 2.276098] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 2.341092] usb3503 0-0008: switched to HUB mode
- [ 2.345669] usb3503 0-0008: usb3503_probe: probed on hub mode
- [ 2.371246] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [ 2.376398] s3c-hsotg s3c-hsotg: Already power on PHY
- [ 2.380914] s3c-hsotg s3c-hsotg: EPs:15
- [ 2.385348] s3c-hsotg s3c-hsotg: dedicated fifos
- [ 2.390045] max77686-rtc max77686-rtc: max77686_rtc_probe
- [ 2.411400] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [ 2.416786] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.496721] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 2.505134] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [ 2.509898] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 541 ns
- [ 2.516989] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 17041 ns
- [ 2.524952] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 458 ns
- [ 2.531934] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3167 ns
- [ 2.536150] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [ 2.545491] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [ 2.552539] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 458 ns
- [ 2.559623] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15250 ns
- [ 2.567608] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 583 ns
- [ 2.574590] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2459 ns
- [ 2.574660] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [ 2.588215] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 375 ns
- [ 2.595344] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15042 ns
- [ 2.603304] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 458 ns
- [ 2.610311] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
- [ 2.611153] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [ 2.623318] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2709 ns
- [ 2.630990] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 417 ns
- [ 2.638063] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 15042 ns
- [ 2.646040] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 459 ns
- [ 2.653059] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 458 ns
- [ 2.656425] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [ 2.656534] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [ 2.656646] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [ 2.656751] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [ 2.656855] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [ 2.656964] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [ 2.657068] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [ 2.657178] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [ 2.657816] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [ 2.657920] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [ 2.657923] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [ 2.658018] sclk_mfc rate is: 220
- [ 2.658183] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [ 2.658287] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [ 2.658675] Exynos: Kernel Thermal management registered
- [ 2.658874] cpuidle: using governor ladder
- [ 2.658900] sdhci: Secure Digital Host Controller Interface driver
- [ 2.658902] sdhci: Copyright(c) Pierre Ossman
- [ 2.658984] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [ 2.659049] mmc0: no vqmmc regulator found
- [ 2.659056] mmc0: no vmmc regulator found
- [ 2.676105] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [ 2.686099] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [ 2.791101] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3792 ns
- [ 2.798788] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 666 ns
- [ 2.806045] pd-cam: Power-off latency exceeded, new value 236417 ns
- [ 2.806403] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
- [ 2.806410] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.806868] hub 1-3:1.0: USB hub found
- [ 2.807025] hub 1-3:1.0: 3 ports detected
- [ 2.834106] dw_mmc dw_mmc: Using internal DMA controller.
- [ 2.866106] DWMMC: Div 2 = 130
- [ 2.866131] dw_mmc dw_mmc: Version ID is 240a
- [ 2.866138] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
- [ 2.871306] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.871468] usbcore: registered new interface driver usbhid
- [ 2.871470] usbhid: USB HID core driver
- [ 2.871535] cec: Probe start
- [ 2.871537] s5p_cec_probe: pdata=e6cab940
- [ 2.871555] s5p_cec_mem_probe(): mapped cec_base to f00a2000, size 0x1000
- [ 2.871683] cec: Requesting irq 146 for s5p-cec
- [ 2.871716] cec: probe successful
- [ 2.896325] max98090 1-0010: MAX98090 REVID=0x43
- [ 2.923115] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130)
- [ 2.935053] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.944026] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.951466] TCP: cubic registered
- [ 2.955602] NET: Registered protocol family 17
- [ 2.959779] NET: Registered protocol family 15
- [ 2.963891] NET: Registered protocol family 35
- [ 2.968167] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 2.972949] mmc1: BKOPS_EN bit is not set
- [ 2.974082] DWMMC: Div 2 = 1
- [ 2.974092] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 52000000Hz, actual 52000000HZ div = 1)
- [ 2.974490] mmc1: new high speed DDR MMC card at address 0001
- [ 2.974821] mmcblk0: mmc1:0001 008G92 7.28 GiB
- [ 2.975009] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB
- [ 2.975170] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB
- [ 2.975334] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB
- [ 2.976213] mmcblk0: p1 p2
- [ 2.977669] mmcblk0boot1: unknown partition table
- [ 2.978708] mmcblk0boot0: unknown partition table
- [ 3.031669] ThumbEE CPU extension supported.
- [ 3.035897] pd-gps: Power-off latency exceeded, new value 4259000 ns
- [ 3.036108] Registering SWP/SWPB emulation handler
- [ 3.036453] registered taskstats version 1
- [ 3.051241] pd-lcd0: Power-off latency exceeded, new value 625 ns
- [ 3.057290] pd-lcd1: Power-off latency exceeded, new value 6067584 ns
- [ 3.063685] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 20:14:07 UTC (946757647)
- [ 3.063932] pd-mfc: Power-off latency exceeded, new value 237875 ns
- [ 3.080644] exynos4_dvfs_hotplug_init, max(2000000),min(0)
- [ 3.083323] ALSA device list:
- [ 3.085966] #0: Built-in Audio
- [ 3.089606] Freeing init memory: 176K
- Loading, please wait...
- [ 3.116155] usb 1-3.2: new full-speed USB device number 4 using s5p-ehci
- [ 3.133801] systemd-udevd[94]: starting version 204
- [ 3.224777] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 3.229166] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.236281] usb 1-3.2: Product: USB Receiver
- [ 3.240414] usb 1-3.2: Manufacturer: Logitech
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- [ 3.320481] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- run-init: /sbin/init: Accessing a corrupted shared library
- [ 3.391148] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
- [ 3.391148]
- [ 3.399857] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c041fbc8>] (panic+0x90/0x1e8)
- [ 3.405423] [<c041fbc8>] (panic+0x90/0x1e8) from [<c0029f98>] (do_exit+0x784/0x838)
- [ 3.413048] [<c0029f98>] (do_exit+0x784/0x838) from [<c002a078>] (do_group_exit+0x0/0xb0)
- [ 3.421223] [<c002a078>] (do_group_exit+0x0/0xb0) from [<fffff001>] (0xfffff001)
- [ 3.425936] CPU3: stopping
- [ 3.431386] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.439988] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.448592] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.456923] Exception stack(0xe7075f40 to 0xe7075f88)
- [ 3.461970] 5f40: e7075f88 3b9aca00 cbd72665 00000000 cb8cf082 00000000 c16b83f0 00000000
- [ 3.470175] 5f60: c0609300 413fc090 c0603d90 00000000 00000018 e7075f88 c005c0fc c0319074
- [ 3.478336] 5f80: 60000053 ffffffff
- [ 3.481800] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.490535] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.500083] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.509558] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.518066] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.525111] CPU0: stopping
- [ 3.528043] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.536539] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.545130] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.553483] Exception stack(0xc05dff10 to 0xc05dff58)
- [ 3.558517] ff00: c05dff58 3b9aca00 cbd72735 00000000
- [ 3.566682] ff20: cb8d02e7 00000000 c16a03f0 00000000 c0609300 413fc090 c0603d90 00000000
- [ 3.574808] ff40: 00000018 c05dff58 c005c0fc c0319074 60000053 ffffffff
- [ 3.581442] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.590239] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.599729] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.609234] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.617779] [<c000f524>] (cpu_idle+0x98/0xfc) from [<c05b1acc>] (start_kernel+0x354/0x3b4)
- [ 3.626011] CPU2: stopping
- [ 3.629211] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.637585] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.645994] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.654301] Exception stack(0xe7073f40 to 0xe7073f88)
- [ 3.659327] 3f40: e7073f88 3b9aca00 cbd727dc 00000000 cb8cef35 00000000 c16b03f0 00000000
- [ 3.667699] 3f60: c0609300 413fc090 c0603d90 00000000 00000018 e7073f88 c005c0fc c0319074
- [ 3.675759] 3f80: 60000053 ffffffff
- [ 3.679177] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.687923] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.697509] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.707018] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.712049] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.722544] drm_kms_helper: panic occurred, switching back to text console
- OK
- U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 880MHz
- DRAM: 2 GiB
- PMIC VERSION : 0x00, CHIP REV : 2
- TrustZone Enabled BSP
- BL1 version: 20121128
- Checking Boot Mode ... EMMC4.41
- REVISION: 2.0
- Manufacturer TOSHIBA [ 7456MB ]
- NAME: S5P_MSHC4
- MMC Device 0: 7456 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- *** Warning - using default environment
- USB3503 NINT = OUTPUT LOW!
- ModeKey Check... run normal_boot
- No ethernet found.
- Hit any key to stop autoboot: 1 0
- do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- reading boot.ini
- ** Unable to read file boot.ini **
- NAME: S5P_MSHC4
- NAME: S5P_MSHC4
- >>> Load Boot Script from mmc 0:1 <<<
- reading boot.scr
- Warning : Reads a file that is smaller than the cluster size.
- 380 bytes read in 32 ms (10.7 KiB/s)
- ## Executing script at 40008000
- reading zImage
- 2352272 bytes read in 47 ms (47.7 MiB/s)
- reading uInitrd
- 2127570 bytes read in 21 ms (96.6 MiB/s)
- Boot with zImage
- ## Loading init Ramdisk from Legacy Image at 42000000 ...
- Image Name: uInitrd 3.8.13.30
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 2127506 Bytes = 2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [ 0.000000] Kernel was built at commit id 'db41cd1'
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROID-U2/U3
- [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] audiocdclk: no parent clock specified
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [ 0.000000] Running under secure firmware.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2047MB = 2047MB total
- [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.005624] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.050060] pid_max: default: 32768 minimum: 301
- [ 0.050339] Mount-cache hash table entries: 512
- [ 0.051313] Initializing cgroup subsys cpuacct
- [ 0.051348] Initializing cgroup subsys memory
- [ 0.051406] Initializing cgroup subsys devices
- [ 0.051419] Initializing cgroup subsys freezer
- [ 0.051430] Initializing cgroup subsys perf_event
- [ 0.051559] CPU: Testing write buffer coherency: ok
- [ 0.051884] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.052005] Setting up static identity map for 0x40426850 - 0x404268a8
- [ 0.052077] L310 cache controller enabled
- [ 0.052104] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.102252] CPU1: Booted secondary processor
- [ 0.121937] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.132237] CPU2: Booted secondary processor
- [ 0.151936] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.162249] CPU3: Booted secondary processor
- [ 0.181937] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.181973] Brought up 4 CPUs
- [ 0.182043] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.182870] devtmpfs: initialized
- [ 0.188609] regulator-dummy: no parameters
- [ 0.195996] NET: Registered protocol family 16
- [ 0.203670] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.205611] s5p_hdmi_cec_set_platdata()
- [ 0.207405] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.207427] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.207521] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.207609] EXYNOS4x12 PMU Initialize
- [ 0.208430] EXYNOS: Initializing architecture
- [ 0.208824] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [ 0.208900] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [ 0.212974] bio: create slab <bio-0> at 0
- [ 0.213310] hdmi_5v: 5000 mV
- [ 0.213663] SCSI subsystem initialized
- [ 0.213829] usbcore: registered new interface driver usbfs
- [ 0.213882] usbcore: registered new interface driver hub
- [ 0.213967] usbcore: registered new device driver usb
- [ 0.214229] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [ 0.214336] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.214358] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [ 0.214752] max77686 0-0009: device found
- [ 0.216507] LDO1 VDD_ALIVE: 1000 mV
- [ 0.218078] LDO2 VDDQ_M1_1V8: 1800 mV
- [ 0.219474] LDO3 VDDQ_AUD_1V8: 1800 mV
- [ 0.220889] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [ 0.222304] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [ 0.223870] LDO6 VDD10_MPLL_1V0: 1000 mV
- [ 0.225409] LDO7 VDD10_EPLL_1V0: 1000 mV
- [ 0.226797] LDO8 VDD10_MIPI_1V0: 1000 mV
- [ 0.228138] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [ 0.228157] LDO9 VT_CORE_1V0: 1000 mV
- [ 0.229548] LDO10 VDD18_MIPI_1V8: 1800 mV
- [ 0.230940] LDO11 VDD18_ABB1_1V8: 1800 mV
- [ 0.231859] vdd_ldo12 range: 3300 mV
- [ 0.233250] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [ 0.234654] LDO14 VDD18_ADC_1V8: 1800 mV
- [ 0.235571] vdd_ldo15 range: 1000 mV
- [ 0.236965] LDO16 VDD18_HSIC: 1800 mV
- [ 0.238448] LDO17 VDDQ_CAM_1V8: 1800 mV
- [ 0.239633] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [ 0.239651] LDO18 VDDQ_ISP_1V8: 1800 mV
- [ 0.240207] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [ 0.240225] LDO19 VT_CAM_1V8: 1800 mV
- [ 0.241148] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [ 0.242481] LDO21 TFLASH_2V8: 2800 mV
- [ 0.243973] vddf_emmc_2V85: 2850 mV
- [ 0.245304] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [ 0.245315] LDO23 VDD_TOUCH_2V8: 2800 mV
- [ 0.246661] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [ 0.246681] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [ 0.248188] LDO25 VDDQ_LCD_3V0: 1800 mV
- [ 0.249366] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [ 0.249384] LDO26 VDD_MOTOR_3V0: 3000 mV
- [ 0.249939] BUCK1 vdd_mif: 1100 mV
- [ 0.250696] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [ 0.251265] BUCK3 vdd_int: 1125 mV
- [ 0.252029] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [ 0.253430] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [ 0.254819] BUCK6 1V35: 1350 mV
- [ 0.256215] BUCK7 2V0: 2000 mV
- [ 0.256772] ODROIDU2: Regulator BUCK8
- [ 0.377785] BUCK8 3V0: 3300 mV
- [ 0.378969] BUCK9 1V2: ODROIDU2: Disabled regulator
- [ 0.378987] BUCK9 1V2: 1200 mV
- [ 0.379391] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.379459] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.379481] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [ 0.379636] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.379698] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 0.379719] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [ 0.379817] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.379873] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [ 0.379894] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [ 0.379987] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [ 0.380050] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.380071] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [ 0.380224] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.380279] media: Linux media interface: v0.10
- [ 0.380324] Linux video capture interface: v2.00
- [ 0.380556] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.381163] Switching to clocksource mct-frc
- [ 0.387949] NET: Registered protocol family 2
- [ 0.388412] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.388543] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.388683] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.388743] TCP: reno registered
- [ 0.388762] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388805] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.389047] NET: Registered protocol family 1
- [ 0.389220] Trying to unpack rootfs image as initramfs...
- [ 0.493731] Freeing initrd memory: 2076K
- [ 0.493940] CPU PMU: probing PMU on CPU 0
- [ 0.493968] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.495160] bounce pool size: 64 pages
- [ 0.501076] msgmni has been set to 1471
- [ 0.502117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.502141] io scheduler noop registered
- [ 0.502155] io scheduler deadline registered
- [ 0.502304] io scheduler cfq registered (default)
- [ 0.509841] SoftPWM v0.2-acme initializing.
- [ 0.509856] Clock resolution is 1ns
- [ 0.509889] SoftPWM initialized.
- [ 0.512440] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.512465] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.514687] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.514710] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.515499] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.515522] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.556068] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.556326] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.574480] console [ttySAC1] enabled
- [ 1.578340] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.586058] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.593907] [drm] Initialized drm 1.1.0 20060810
- [ 1.598469] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [ 1.604652] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [ 1.611627] exynos-mixer s5p-mixer: probe start
- [ 1.616248] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [ 1.623323] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.629308] [drm] No driver support for vblank timestamp query.
- [ 1.701470] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 625 ns
- [ 1.702075] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 595792 ns
- [ 1.702090] exynos-mixer s5p-mixer: start latency exceeded, new value 459 ns
- [ 1.702128] exynos-mixer s5p-mixer: state restore latency exceeded, new value 32375 ns
- [ 1.785624] Console: switching to colour frame buffer device 240x67
- [ 1.835519] exynos-drm exynos-drm: fb0: frame buffer device
- [ 1.841146] exynos-drm exynos-drm: registered panic notifier
- [ 1.846788] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [ 1.852673] mali-utgard mali-utgard.0: start latency exceeded, new value 500 ns
- [ 1.859912] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3167 ns
- [ 1.869304] Mali: init_mali_clock mali_clock c0605c68
- [ 1.875199] mali-utgard mali-utgard.0: stop latency exceeded, new value 500 ns
- [ 1.880298] mali-utgard mali-utgard.0: state save latency exceeded, new value 2250 ns
- [ 1.888335] pd-g3d: Power-off latency exceeded, new value 234375 ns
- [ 1.894362] Mali: Mali device driver loaded
- [ 1.903827] brd: module loaded
- [ 1.906836] loop: module loaded
- [ 1.907034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.911357] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.916353] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.923803] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.936229] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [ 1.936435] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.942874] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.950075] usb usb1: Product: S5P EHCI Host Controller
- [ 1.955247] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [ 1.960891] usb usb1: SerialNumber: s5p-ehci
- [ 1.965489] hub 1-0:1.0: USB hub found
- [ 1.968856] hub 1-0:1.0: 3 ports detected
- [ 1.973140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.979105] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.984397] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.990398] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 2.002620] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 2.065272] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.071262] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.078449] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 2.083879] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [ 2.089519] usb usb2: SerialNumber: exynos-ohci
- [ 2.094646] hub 2-0:1.0: USB hub found
- [ 2.099397] hub 2-0:1.0: 3 ports detected
- [ 2.104419] Initializing USB Mass Storage driver...
- [ 2.109193] usbcore: registered new interface driver usb-storage
- [ 2.114274] USB Mass Storage support registered.
- [ 2.236473] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [ 2.281236] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 2.346233] usb3503 0-0008: switched to HUB mode
- [ 2.350822] usb3503 0-0008: usb3503_probe: probed on hub mode
- [ 2.376380] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [ 2.381543] s3c-hsotg s3c-hsotg: Already power on PHY
- [ 2.386074] s3c-hsotg s3c-hsotg: EPs:15
- [ 2.390524] s3c-hsotg s3c-hsotg: dedicated fifos
- [ 2.395254] max77686-rtc max77686-rtc: max77686_rtc_probe
- [ 2.416578] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [ 2.421975] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.501863] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 2.510305] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [ 2.515078] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 625 ns
- [ 2.522169] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 17000 ns
- [ 2.530151] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [ 2.537119] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3083 ns
- [ 2.541293] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [ 2.550683] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 458 ns
- [ 2.557804] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15708 ns
- [ 2.565767] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 625 ns
- [ 2.572769] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 500 ns
- [ 2.576284] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [ 2.585811] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2709 ns
- [ 2.593497] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 416 ns
- [ 2.600603] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15416 ns
- [ 2.608563] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 500 ns
- [ 2.615572] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
- [ 2.616291] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [ 2.628575] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2834 ns
- [ 2.636246] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 416 ns
- [ 2.643326] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 15125 ns
- [ 2.651307] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 500 ns
- [ 2.658327] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 458 ns
- [ 2.661564] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [ 2.661678] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [ 2.661790] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [ 2.661894] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [ 2.662003] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [ 2.662107] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [ 2.662216] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [ 2.662320] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [ 2.662974] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [ 2.663082] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [ 2.663085] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [ 2.663182] sclk_mfc rate is: 220
- [ 2.663337] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [ 2.663447] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [ 2.663838] Exynos: Kernel Thermal management registered
- [ 2.664034] cpuidle: using governor ladder
- [ 2.664060] sdhci: Secure Digital Host Controller Interface driver
- [ 2.664062] sdhci: Copyright(c) Pierre Ossman
- [ 2.664144] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [ 2.664206] mmc0: no vqmmc regulator found
- [ 2.664214] mmc0: no vmmc regulator found
- [ 2.782360] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3208 ns
- [ 2.786261] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [ 2.796868] pd-cam: Power-off latency exceeded, new value 236500 ns
- [ 2.801235] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [ 2.810507] dw_mmc dw_mmc: Using internal DMA controller.
- [ 2.841238] DWMMC: Div 2 = 130
- [ 2.841277] dw_mmc dw_mmc: Version ID is 240a
- [ 2.841284] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
- [ 2.846433] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.846591] usbcore: registered new interface driver usbhid
- [ 2.846593] usbhid: USB HID core driver
- [ 2.846650] cec: Probe start
- [ 2.846653] s5p_cec_probe: pdata=e6cab940
- [ 2.846671] s5p_cec_mem_probe(): mapped cec_base to f00a2000, size 0x1000
- [ 2.846788] cec: Requesting irq 146 for s5p-cec
- [ 2.846819] cec: probe successful
- [ 2.871459] max98090 1-0010: MAX98090 REVID=0x43
- [ 2.898636] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130)
- [ 2.910779] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.919679] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.927159] TCP: cubic registered
- [ 2.931353] NET: Registered protocol family 17
- [ 2.935561] NET: Registered protocol family 15
- [ 2.939719] NET: Registered protocol family 35
- [ 2.944040] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 2.948098] mmc1: BKOPS_EN bit is not set
- [ 2.949235] DWMMC: Div 2 = 1
- [ 2.949244] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 52000000Hz, actual 52000000HZ div = 1)
- [ 2.949641] mmc1: new high speed DDR MMC card at address 0001
- [ 2.949971] mmcblk0: mmc1:0001 008G92 7.28 GiB
- [ 2.950154] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB
- [ 2.950320] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB
- [ 2.950483] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB
- [ 2.951350] mmcblk0: p1 p2
- [ 2.952810] mmcblk0boot1: unknown partition table
- [ 2.953842] mmcblk0boot0: unknown partition table
- [ 2.981581] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
- [ 2.981588] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.982059] hub 1-3:1.0: USB hub found
- [ 2.982200] hub 1-3:1.0: 3 ports detected
- [ 3.029483] ThumbEE CPU extension supported.
- [ 3.033605] pd-gps: Power-off latency exceeded, new value 4153083 ns
- [ 3.036246] Registering SWP/SWPB emulation handler
- [ 3.036606] registered taskstats version 1
- [ 3.048502] pd-lcd0: Power-off latency exceeded, new value 584 ns
- [ 3.054574] pd-lcd1: Power-off latency exceeded, new value 6090792 ns
- [ 3.061220] pd-mfc: Power-off latency exceeded, new value 250958 ns
- [ 3.067225] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 20:16:22 UTC (946757782)
- [ 3.077949] exynos4_dvfs_hotplug_init, max(2000000),min(0)
- [ 3.080604] ALSA device list:
- [ 3.083353] #0: Built-in Audio
- [ 3.086952] Freeing init memory: 176K
- Loading, please wait...
- [ 3.131976] systemd-udevd[93]: starting version 204
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- [ 3.271356] usb 1-3.2: new full-speed USB device number 4 using s5p-ehci
- Begin: Running /scripts/local-premount ... done.
- [ 3.337045] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- [ 3.379573] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 3.383514] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.390753] usb 1-3.2: Product: USB Receiver
- [ 3.395168] usb 1-3.2: Manufacturer: Logitech
- run-init: /sbin/init: Accessing a corrupted shared library
- [ 3.421283] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
- [ 3.421283]
- [ 3.430013] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c041fbc8>] (panic+0x90/0x1e8)
- [ 3.435584] [<c041fbc8>] (panic+0x90/0x1e8) from [<c0029f98>] (do_exit+0x784/0x838)
- [ 3.443208] [<c0029f98>] (do_exit+0x784/0x838) from [<c002a078>] (do_group_exit+0x0/0xb0)
- [ 3.451373] [<c002a078>] (do_group_exit+0x0/0xb0) from [<fffff001>] (0xfffff001)
- [ 3.458733] CPU0: stopping
- [ 3.461386] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.470133] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.478746] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.487071] Exception stack(0xc05dff10 to 0xc05dff58)
- [ 3.492071] ff00: c05dff58 3b9aca00 cdc9754a 00000000
- [ 3.500268] ff20: cda30478 00000000 c16a03f0 00000000 c0609300 413fc090 c0603d90 00000000
- [ 3.508433] ff40: 00000018 c05dff58 c005c0fc c0319074 60000053 ffffffff
- [ 3.515051] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.523810] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.533349] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.542817] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.551343] [<c000f524>] (cpu_idle+0x98/0xfc) from [<c05b1acc>] (start_kernel+0x354/0x3b4)
- [ 3.559597] CPU2: stopping
- [ 3.562582] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.570950] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.579583] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.587908] Exception stack(0xe7073f40 to 0xe7073f88)
- [ 3.592943] 3f40: e7073f88 3b9aca00 cdc97644 00000000 cda307e3 00000000 c16b03f0 00000000
- [ 3.601175] 3f60: c0609300 413fc090 c0603d90 00000000 00000018 e7073f88 c005c0fc c0319074
- [ 3.609365] 3f80: 60000053 ffffffff
- [ 3.612800] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.621527] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.631148] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.640561] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.645923] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.656053] CPU3: stopping
- [ 3.659175] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.667501] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.672896] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.684432] Exception stack(0xe7075f40 to 0xe7075f88)
- [ 3.689463] 5f40: e7075f88 3b9aca00 cdc976c1 00000000 cda30548 00000000 c16b83f0 00000000
- [ 3.697658] 5f60: c0609300 413fc090 c0603d90 00000000 00000018 e7075f88 c005c0fc c0319074
- [ 3.705832] 5f80: 60000053 ffffffff
- [ 3.709318] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.718050] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.727631] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.737180] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.745632] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.752664] drm_kms_helper: panic occurred, switching back to text console
- OK
- U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 880MHz
- DRAM: 2 GiB
- PMIC VERSION : 0x00, CHIP REV : 3
- TrustZone Enabled BSP
- BL1 version: 20121128
- Checking Boot Mode ... EMMC4.41
- REVISION: 2.0
- Manufacturer TOSHIBA [ 7456MB ]
- NAME: S5P_MSHC4
- MMC Device 0: 7456 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- *** Warning - using default environment
- USB3503 NINT = OUTPUT LOW!
- ModeKey Check... run normal_boot
- No ethernet found.
- Hit any key to stop autoboot: 1 0
- do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- reading boot.ini
- ** Unable to read file boot.ini **
- NAME: S5P_MSHC4
- NAME: S5P_MSHC4
- >>> Load Boot Script from mmc 0:1 <<<
- reading boot.scr
- Warning : Reads a file that is smaller than the cluster size.
- 380 bytes read in 32 ms (10.7 KiB/s)
- ## Executing script at 40008000
- reading zImage
- 2352272 bytes read in 47 ms (47.7 MiB/s)
- reading uInitrd
- 2127570 bytes read in 21 ms (96.6 MiB/s)
- Boot with zImage
- ## Loading init Ramdisk from Legacy Image at 42000000 ...
- Image Name: uInitrd 3.8.13.30
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 2127506 Bytes = 2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [ 0.000000] Kernel was built at commit id 'db41cd1'
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROID-U2/U3
- [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] audiocdclk: no parent clock specified
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [ 0.000000] Running under secure firmware.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2047MB = 2047MB total
- [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.005625] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.050060] pid_max: default: 32768 minimum: 301
- [ 0.050341] Mount-cache hash table entries: 512
- [ 0.051312] Initializing cgroup subsys cpuacct
- [ 0.051346] Initializing cgroup subsys memory
- [ 0.051399] Initializing cgroup subsys devices
- [ 0.051421] Initializing cgroup subsys freezer
- [ 0.051439] Initializing cgroup subsys perf_event
- [ 0.051563] CPU: Testing write buffer coherency: ok
- [ 0.051898] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.052018] Setting up static identity map for 0x40426850 - 0x404268a8
- [ 0.052092] L310 cache controller enabled
- [ 0.052118] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.102262] CPU1: Booted secondary processor
- [ 0.121951] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.132252] CPU2: Booted secondary processor
- [ 0.151951] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.162264] CPU3: Booted secondary processor
- [ 0.181951] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.181987] Brought up 4 CPUs
- [ 0.182057] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.182885] devtmpfs: initialized
- [ 0.188643] regulator-dummy: no parameters
- [ 0.196040] NET: Registered protocol family 16
- [ 0.203650] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.205592] s5p_hdmi_cec_set_platdata()
- [ 0.207387] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.207410] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.207504] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.207592] EXYNOS4x12 PMU Initialize
- [ 0.208411] EXYNOS: Initializing architecture
- [ 0.208804] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [ 0.208881] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [ 0.212956] bio: create slab <bio-0> at 0
- [ 0.213294] hdmi_5v: 5000 mV
- [ 0.213647] SCSI subsystem initialized
- [ 0.213813] usbcore: registered new interface driver usbfs
- [ 0.213867] usbcore: registered new interface driver hub
- [ 0.213950] usbcore: registered new device driver usb
- [ 0.214213] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [ 0.214322] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.214344] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [ 0.214737] max77686 0-0009: device found
- [ 0.216488] LDO1 VDD_ALIVE: 1000 mV
- [ 0.218056] LDO2 VDDQ_M1_1V8: 1800 mV
- [ 0.219449] LDO3 VDDQ_AUD_1V8: 1800 mV
- [ 0.220859] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [ 0.222263] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [ 0.223822] LDO6 VDD10_MPLL_1V0: 1000 mV
- [ 0.225355] LDO7 VDD10_EPLL_1V0: 1000 mV
- [ 0.226732] LDO8 VDD10_MIPI_1V0: 1000 mV
- [ 0.228076] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [ 0.228094] LDO9 VT_CORE_1V0: 1000 mV
- [ 0.229480] LDO10 VDD18_MIPI_1V8: 1800 mV
- [ 0.230868] LDO11 VDD18_ABB1_1V8: 1800 mV
- [ 0.231783] vdd_ldo12 range: 3300 mV
- [ 0.233164] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [ 0.234564] LDO14 VDD18_ADC_1V8: 1800 mV
- [ 0.235478] vdd_ldo15 range: 1000 mV
- [ 0.236868] LDO16 VDD18_HSIC: 1800 mV
- [ 0.238347] LDO17 VDDQ_CAM_1V8: 1800 mV
- [ 0.239532] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [ 0.239550] LDO18 VDDQ_ISP_1V8: 1800 mV
- [ 0.240106] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [ 0.240116] LDO19 VT_CAM_1V8: 1800 mV
- [ 0.241035] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [ 0.242373] LDO21 TFLASH_2V8: 2800 mV
- [ 0.243861] vddf_emmc_2V85: 2850 mV
- [ 0.245188] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [ 0.245207] LDO23 VDD_TOUCH_2V8: 2800 mV
- [ 0.246551] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [ 0.246570] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [ 0.248060] LDO25 VDDQ_LCD_3V0: 1800 mV
- [ 0.249235] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [ 0.249254] LDO26 VDD_MOTOR_3V0: 3000 mV
- [ 0.249806] BUCK1 vdd_mif: 1100 mV
- [ 0.250569] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [ 0.251136] BUCK3 vdd_int: 1125 mV
- [ 0.251898] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [ 0.253298] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [ 0.254683] BUCK6 1V35: 1350 mV
- [ 0.256074] BUCK7 2V0: 2000 mV
- [ 0.256632] ODROIDU2: Regulator BUCK8
- [ 0.377639] BUCK8 3V0: 3300 mV
- [ 0.378819] BUCK9 1V2: ODROIDU2: Disabled regulator
- [ 0.378836] BUCK9 1V2: 1200 mV
- [ 0.379239] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.379306] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.379328] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [ 0.379483] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.379545] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 0.379566] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [ 0.379665] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.379720] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [ 0.379741] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [ 0.379835] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [ 0.379898] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.379919] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [ 0.380072] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.380127] media: Linux media interface: v0.10
- [ 0.380172] Linux video capture interface: v2.00
- [ 0.380404] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.381006] Switching to clocksource mct-frc
- [ 0.387799] NET: Registered protocol family 2
- [ 0.388261] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.388393] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.388533] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.388595] TCP: reno registered
- [ 0.388615] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388659] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388902] NET: Registered protocol family 1
- [ 0.389076] Trying to unpack rootfs image as initramfs...
- [ 0.493509] Freeing initrd memory: 2076K
- [ 0.493717] CPU PMU: probing PMU on CPU 0
- [ 0.493744] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.494959] bounce pool size: 64 pages
- [ 0.500805] msgmni has been set to 1471
- [ 0.501888] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.501912] io scheduler noop registered
- [ 0.501925] io scheduler deadline registered
- [ 0.502075] io scheduler cfq registered (default)
- [ 0.506317] SoftPWM v0.2-acme initializing.
- [ 0.506331] Clock resolution is 1ns
- [ 0.506364] SoftPWM initialized.
- [ 0.508892] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.508918] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.511163] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.511186] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.511973] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.511996] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.552474] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.552712] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.570862] console [ttySAC1] enabled
- [ 1.574718] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.582439] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.590271] [drm] Initialized drm 1.1.0 20060810
- [ 1.594880] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [ 1.601027] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [ 1.608009] exynos-mixer s5p-mixer: probe start
- [ 1.612615] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [ 1.619698] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.625686] [drm] No driver support for vblank timestamp query.
- [ 1.697711] exynos-hdmi exynos4-hdmi: start latency exceeded, new value 709 ns
- [ 1.698311] exynos-hdmi exynos4-hdmi: state restore latency exceeded, new value 591208 ns
- [ 1.698326] exynos-mixer s5p-mixer: start latency exceeded, new value 458 ns
- [ 1.698363] exynos-mixer s5p-mixer: state restore latency exceeded, new value 31666 ns
- [ 1.780463] Console: switching to colour frame buffer device 240x67
- [ 1.830357] exynos-drm exynos-drm: fb0: frame buffer device
- [ 1.835983] exynos-drm exynos-drm: registered panic notifier
- [ 1.841626] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [ 1.847511] mali-utgard mali-utgard.0: start latency exceeded, new value 459 ns
- [ 1.854750] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3458 ns
- [ 1.864143] Mali: init_mali_clock mali_clock c0605c68
- [ 1.870023] mali-utgard mali-utgard.0: stop latency exceeded, new value 458 ns
- [ 1.875136] mali-utgard mali-utgard.0: state save latency exceeded, new value 2208 ns
- [ 1.883173] pd-g3d: Power-off latency exceeded, new value 234125 ns
- [ 1.889200] Mali: Mali device driver loaded
- [ 1.898660] brd: module loaded
- [ 1.901664] loop: module loaded
- [ 1.901865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.906188] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.911190] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.918638] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.931072] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [ 1.931274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.937712] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.944912] usb usb1: Product: S5P EHCI Host Controller
- [ 1.950085] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [ 1.955729] usb usb1: SerialNumber: s5p-ehci
- [ 1.960334] hub 1-0:1.0: USB hub found
- [ 1.963693] hub 1-0:1.0: 3 ports detected
- [ 1.967973] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.973940] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.979233] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.985236] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 1.997444] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 2.060130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.066109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.073287] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 2.078726] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [ 2.084355] usb usb2: SerialNumber: exynos-ohci
- [ 2.089472] hub 2-0:1.0: USB hub found
- [ 2.094208] hub 2-0:1.0: 3 ports detected
- [ 2.099190] Initializing USB Mass Storage driver...
- [ 2.103954] usbcore: registered new interface driver usb-storage
- [ 2.109033] USB Mass Storage support registered.
- [ 2.231311] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [ 2.276078] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 2.341075] usb3503 0-0008: switched to HUB mode
- [ 2.345654] usb3503 0-0008: usb3503_probe: probed on hub mode
- [ 2.371235] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [ 2.376383] s3c-hsotg s3c-hsotg: Already power on PHY
- [ 2.380898] s3c-hsotg s3c-hsotg: EPs:15
- [ 2.385329] s3c-hsotg s3c-hsotg: dedicated fifos
- [ 2.390020] max77686-rtc max77686-rtc: max77686_rtc_probe
- [ 2.411397] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [ 2.416783] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.496703] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 2.505119] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [ 2.509888] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 583 ns
- [ 2.516975] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 16625 ns
- [ 2.524936] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 459 ns
- [ 2.531924] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3084 ns
- [ 2.536135] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [ 2.545476] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 500 ns
- [ 2.552526] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 459 ns
- [ 2.559604] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15000 ns
- [ 2.567604] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 500 ns
- [ 2.574570] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2416 ns
- [ 2.576138] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [ 2.588204] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 458 ns
- [ 2.595331] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15042 ns
- [ 2.603293] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 458 ns
- [ 2.610298] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2542 ns
- [ 2.611134] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [ 2.623833] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 500 ns
- [ 2.630879] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 417 ns
- [ 2.637971] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 15000 ns
- [ 2.645947] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 458 ns
- [ 2.652976] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 2417 ns
- [ 2.656405] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [ 2.656514] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [ 2.656626] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [ 2.656731] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [ 2.656835] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [ 2.656945] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [ 2.657049] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [ 2.657158] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [ 2.657795] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [ 2.657898] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [ 2.657902] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [ 2.657998] sclk_mfc rate is: 220
- [ 2.658161] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [ 2.658267] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [ 2.658655] Exynos: Kernel Thermal management registered
- [ 2.658856] cpuidle: using governor ladder
- [ 2.658883] sdhci: Secure Digital Host Controller Interface driver
- [ 2.658885] sdhci: Copyright(c) Pierre Ossman
- [ 2.658966] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [ 2.659028] mmc0: no vqmmc regulator found
- [ 2.659036] mmc0: no vmmc regulator found
- [ 2.777535] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 459 ns
- [ 2.781102] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [ 2.791433] pd-cam: Power-off latency exceeded, new value 235958 ns
- [ 2.796075] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [ 2.805065] dw_mmc dw_mmc: Using internal DMA controller.
- [ 2.836083] DWMMC: Div 2 = 130
- [ 2.836109] dw_mmc dw_mmc: Version ID is 240a
- [ 2.836116] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
- [ 2.846276] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.846450] usbcore: registered new interface driver usbhid
- [ 2.846452] usbhid: USB HID core driver
- [ 2.846510] cec: Probe start
- [ 2.846512] s5p_cec_probe: pdata=e6cab940
- [ 2.846530] s5p_cec_mem_probe(): mapped cec_base to f00a2000, size 0x1000
- [ 2.846646] cec: Requesting irq 146 for s5p-cec
- [ 2.846678] cec: probe successful
- [ 2.871305] max98090 1-0010: MAX98090 REVID=0x43
- [ 2.893439] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130)
- [ 2.905570] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.914426] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.921904] TCP: cubic registered
- [ 2.926103] NET: Registered protocol family 17
- [ 2.930314] NET: Registered protocol family 15
- [ 2.934471] NET: Registered protocol family 35
- [ 2.938796] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 2.942935] mmc1: BKOPS_EN bit is not set
- [ 2.944071] DWMMC: Div 2 = 1
- [ 2.944081] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 52000000Hz, actual 52000000HZ div = 1)
- [ 2.944486] mmc1: new high speed DDR MMC card at address 0001
- [ 2.944810] mmcblk0: mmc1:0001 008G92 7.28 GiB
- [ 2.944997] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB
- [ 2.945156] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB
- [ 2.945319] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB
- [ 2.946206] mmcblk0: p1 p2
- [ 2.947674] mmcblk0boot1: unknown partition table
- [ 2.948700] mmcblk0boot0: unknown partition table
- [ 2.976400] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
- [ 2.976407] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.976873] hub 1-3:1.0: USB hub found
- [ 2.977020] hub 1-3:1.0: 3 ports detected
- [ 3.024226] ThumbEE CPU extension supported.
- [ 3.028330] pd-gps: Power-off latency exceeded, new value 4135959 ns
- [ 3.031090] Registering SWP/SWPB emulation handler
- [ 3.031453] registered taskstats version 1
- [ 3.043219] pd-lcd0: Power-off latency exceeded, new value 625 ns
- [ 3.049286] pd-lcd1: Power-off latency exceeded, new value 6085458 ns
- [ 3.055920] pd-mfc: Power-off latency exceeded, new value 236125 ns
- [ 3.061962] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 20:56:29 UTC (946760189)
- [ 3.072691] exynos4_dvfs_hotplug_init, max(2000000),min(0)
- [ 3.075333] ALSA device list:
- [ 3.078139] #0: Built-in Audio
- [ 3.081733] Freeing init memory: 176K
- Loading, please wait...
- [ 3.125385] systemd-udevd[93]: starting version 204
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- [ 3.266277] usb 1-3.2: new full-speed USB device number 4 using s5p-ehci
- Begin: Running /scripts/local-premount ... done.
- [ 3.316329] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- [ 3.374396] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 3.378303] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.385570] usb 1-3.2: Product: USB Receiver
- [ 3.389791] usb 1-3.2: Manufacturer: Logitech
- run-init: /sbin/init: Accessing a corrupted shared library
- [ 3.411110] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
- [ 3.411110]
- [ 3.419817] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c041fbc8>] (panic+0x90/0x1e8)
- [ 3.425407] [<c041fbc8>] (panic+0x90/0x1e8) from [<c0029f98>] (do_exit+0x784/0x838)
- [ 3.433035] [<c0029f98>] (do_exit+0x784/0x838) from [<c002a078>] (do_group_exit+0x0/0xb0)
- [ 3.441198] [<c002a078>] (do_group_exit+0x0/0xb0) from [<fffff001>] (0xfffff001)
- [ 3.448560] CPU1: stopping
- [ 3.451343] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.459962] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.468574] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.476899] Exception stack(0xe7071f40 to 0xe7071f88)
- [ 3.481902] 1f40: e7071f88 3b9aca00 cd309e2c 00000000 cd0a65fe 00000000 c16a83f0 00000000
- [ 3.490100] 1f60: c0609300 413fc090 c0603d90 00000000 00000018 e7071f88 c005c0fc c0319074
- [ 3.498261] 1f80: 60000053 ffffffff
- [ 3.501730] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.510490] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.520065] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.529528] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.535145] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.545063] CPU3: stopping
- [ 3.547976] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.556452] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.565020] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.573393] Exception stack(0xe7075f40 to 0xe7075f88)
- [ 3.578399] 5f40: e7075f88 3b9aca00 cd309ed3 00000000 cd0a67f2 00000000 c16b83f0 00000000
- [ 3.586611] 5f60: c0609300 413fc090 c0603d90 00000000 00000018 e7075f88 c005c0fc c0319074
- [ 3.594801] 5f80: 60000053 ffffffff
- [ 3.598284] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.603921] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.616566] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.622915] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.634511] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.641548] CPU2: stopping
- [ 3.644647] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.652907] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.661511] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.669853] Exception stack(0xe7073f40 to 0xe7073f88)
- [ 3.674910] 3f40: e7073f88 3b9aca00 cd309d86 00000000 cd0a6722 00000000 c16b03f0 00000000
- [ 3.683115] 3f60: c0609300 413fc090 c0603d90 00000000 00000018 e7073f88 c005c0fc c0319074
- [ 3.691274] 3f80: 60000053 ffffffff
- [ 3.694734] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.703512] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.713078] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.722558] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.731060] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.738109] drm_kms_helper: panic occurred, switching back to text console
- OK
- U-Boot 2010.12-svn (Apr 24 2014 - 15:05:11) for Exynox4412
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 880MHz
- DRAM: 2 GiB
- PMIC VERSION : 0x00, CHIP REV : 3
- TrustZone Enabled BSP
- BL1 version: 20121128
- Checking Boot Mode ... EMMC4.41
- REVISION: 2.0
- Manufacturer TOSHIBA [ 7456MB ]
- NAME: S5P_MSHC4
- MMC Device 0: 7456 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- *** Warning - using default environment
- USB3503 NINT = OUTPUT LOW!
- ModeKey Check... run normal_boot
- No ethernet found.
- Hit any key to stop autoboot: 1 0
- do_fat_cfgload : cmd = fatload mmc 0:1 0x41000000 boot.ini
- reading boot.ini
- ** Unable to read file boot.ini **
- NAME: S5P_MSHC4
- NAME: S5P_MSHC4
- >>> Load Boot Script from mmc 0:1 <<<
- reading boot.scr
- Warning : Reads a file that is smaller than the cluster size.
- 380 bytes read in 33 ms (10.7 KiB/s)
- ## Executing script at 40008000
- reading zImage
- 2352272 bytes read in 47 ms (47.7 MiB/s)
- reading uInitrd
- 2127570 bytes read in 21 ms (96.6 MiB/s)
- Boot with zImage
- ## Loading init Ramdisk from Legacy Image at 42000000 ...
- Image Name: uInitrd 3.8.13.30
- Image Type: ARM Linux RAMDisk Image (uncompressed)
- Data Size: 2127506 Bytes = 2 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Booting Linux on physical CPU 0xa00
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.8.13.30 (root@xu-b1) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #1 SMP PREEMPT Fri Feb 20 14:34:08 BRST 2015 ()
- [ 0.000000] Kernel was built at commit id 'db41cd1'
- [ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: ODROID-U2/U3
- [ 0.000000] cma: CMA: reserved 64 MiB at 43000000
- [ 0.000000] cma: CMA: reserved 64 MiB at 51000000
- [ 0.000000] cma: CMA: reserved 128 MiB at 67800000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] CPU EXYNOS4412 (id 0xe4412220)
- [ 0.000000] S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] audiocdclk: no parent clock specified
- [ 0.000000] EXYNOS4: PLL settings, A=1000000000, M=880000000, E=96000000 V=350000000
- [ 0.000000] EXYNOS4: ARMCLK=1000000000, DMC=440000000, ACLK200=176000000
- [ 0.000000] ACLK100=110000000, ACLK160=176000000, ACLK133=146666666
- [ 0.000000] sclk_pwm: source is ext_xtal (0), rate is 24000000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] sclk_fimd: source is mout_mpll_user (6), rate is 55000000
- [ 0.000000] sclk_mfc: source is mout_mfc0 (0), rate is 55000000
- [ 0.000000] sclk_g3d: source is mout_g3d0 (0), rate is 55000000
- [ 0.000000] Running under secure firmware.
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c16a0000 s8256 r8192 d16320 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519938
- [ 0.000000] Kernel command line: console=tty1 console=ttySAC1,115200 mem=2047M console=tty1 console=ttySAC1,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro mem=2047M
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] __ex_table already sorted, skipping sort
- [ 0.000000] Memory: 2047MB = 2047MB total
- [ 0.000000] Memory: 1807252k/3614504k available, 577752k reserved, 1317888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc05b02f0 (5793 kB)
- [ 0.000000] .init : 0xc05b1000 - 0xc05dd040 ( 177 kB)
- [ 0.000000] .data : 0xc05de000 - 0xc0647e20 ( 424 kB)
- [ 0.000000] .bss : 0xc0647e20 - 0xc068a8ec ( 267 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:549
- [ 0.000000] MCT clocksource init timer with clk_rate=24000000 hz
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.000000] allocated 4194304 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.005627] Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.050060] pid_max: default: 32768 minimum: 301
- [ 0.050340] Mount-cache hash table entries: 512
- [ 0.051312] Initializing cgroup subsys cpuacct
- [ 0.051349] Initializing cgroup subsys memory
- [ 0.051407] Initializing cgroup subsys devices
- [ 0.051430] Initializing cgroup subsys freezer
- [ 0.051448] Initializing cgroup subsys perf_event
- [ 0.051570] CPU: Testing write buffer coherency: ok
- [ 0.051896] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00
- [ 0.052014] Setting up static identity map for 0x40426850 - 0x404268a8
- [ 0.052087] L310 cache controller enabled
- [ 0.052113] l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.102260] CPU1: Booted secondary processor
- [ 0.121948] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01
- [ 0.132249] CPU2: Booted secondary processor
- [ 0.151948] CPU2: thread -1, cpu 2, socket 10, mpidr 80000a02
- [ 0.162261] CPU3: Booted secondary processor
- [ 0.181948] CPU3: thread -1, cpu 3, socket 10, mpidr 80000a03
- [ 0.181984] Brought up 4 CPUs
- [ 0.182054] SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.182878] devtmpfs: initialized
- [ 0.188639] regulator-dummy: no parameters
- [ 0.196032] NET: Registered protocol family 16
- [ 0.203693] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.205632] s5p_hdmi_cec_set_platdata()
- [ 0.207430] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- [ 0.207452] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.207546] S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.207634] EXYNOS4x12 PMU Initialize
- [ 0.208454] EXYNOS: Initializing architecture
- [ 0.208847] s3c24xx-pwm s3c24xx-pwm.0: tin at 110000000, tdiv at 110000000, tin=divclk, base 0
- [ 0.208922] s3c24xx-pwm s3c24xx-pwm.1: tin at 110000000, tdiv at 110000000, tin=divclk, base 8
- [ 0.213000] bio: create slab <bio-0> at 0
- [ 0.213338] hdmi_5v: 5000 mV
- [ 0.213692] SCSI subsystem initialized
- [ 0.213860] usbcore: registered new interface driver usbfs
- [ 0.213913] usbcore: registered new interface driver hub
- [ 0.213995] usbcore: registered new device driver usb
- [ 0.214258] i2c-gpio i2c-gpio.2: using pins 6 (SDA) and 7 (SCL)
- [ 0.214366] s3c-i2c s3c2440-i2c.0: slave address 0x10
- [ 0.214388] s3c-i2c s3c2440-i2c.0: bus frequency set to 214 KHz
- [ 0.214780] max77686 0-0009: device found
- [ 0.216530] LDO1 VDD_ALIVE: 1000 mV
- [ 0.218097] LDO2 VDDQ_M1_1V8: 1800 mV
- [ 0.219492] LDO3 VDDQ_AUD_1V8: 1800 mV
- [ 0.220903] LDO4 VDDQ_MMC2_2V8: 2800 mV
- [ 0.222316] LDO5 VDDQ_MMC1_1V8: 1800 mV
- [ 0.223878] LDO6 VDD10_MPLL_1V0: 1000 mV
- [ 0.225413] LDO7 VDD10_EPLL_1V0: 1000 mV
- [ 0.226799] LDO8 VDD10_MIPI_1V0: 1000 mV
- [ 0.228140] LDO9 VT_CORE_1V0: ODROIDU2: Disabled regulator
- [ 0.228158] LDO9 VT_CORE_1V0: 1000 mV
- [ 0.229548] LDO10 VDD18_MIPI_1V8: 1800 mV
- [ 0.230938] LDO11 VDD18_ABB1_1V8: 1800 mV
- [ 0.231847] vdd_ldo12 range: 3300 mV
- [ 0.233231] LDO13 VDD18_MIPIHSI_1V8: 1800 mV
- [ 0.234634] LDO14 VDD18_ADC_1V8: 1800 mV
- [ 0.235550] vdd_ldo15 range: 1000 mV
- [ 0.236952] LDO16 VDD18_HSIC: 1800 mV
- [ 0.238434] LDO17 VDDQ_CAM_1V8: 1800 mV
- [ 0.239619] LDO18 VDDQ_ISP_1V8: ODROIDU2: Disabled regulator
- [ 0.239638] LDO18 VDDQ_ISP_1V8: 1800 mV
- [ 0.240194] LDO19 VT_CAM_1V8: ODROIDU2: Disabled regulator
- [ 0.240212] LDO19 VT_CAM_1V8: 1800 mV
- [ 0.241133] vddq_emmc_1V8: 1800 <--> 3000 mV at 1800 mV
- [ 0.242469] LDO21 TFLASH_2V8: 2800 mV
- [ 0.243960] vddf_emmc_2V85: 2850 mV
- [ 0.245290] LDO23 VDD_TOUCH_2V8: ODROIDU2: Disabled regulator
- [ 0.245309] LDO23 VDD_TOUCH_2V8: 2800 mV
- [ 0.246653] LDO24 VDD_TOUCHLED_3V3: ODROIDU2: Disabled regulator
- [ 0.246672] LDO24 VDD_TOUCHLED_3V3: 3300 mV
- [ 0.248177] LDO25 VDDQ_LCD_3V0: 1800 mV
- [ 0.249353] LDO26 VDD_MOTOR_3V0: ODROIDU2: Disabled regulator
- [ 0.249371] LDO26 VDD_MOTOR_3V0: 3000 mV
- [ 0.249926] BUCK1 vdd_mif: 1100 mV
- [ 0.250688] BUCK2 vdd_arm: 800 <--> 1500 mV at 1100 mV
- [ 0.251255] BUCK3 vdd_int: 1125 mV
- [ 0.252019] BUCK4 vdd_g3d: 850 <--> 1200 mV at 1000 mV
- [ 0.253418] BUCK5 VDDQ_CKEM1_2: 1200 mV
- [ 0.254806] BUCK6 1V35: 1350 mV
- [ 0.256192] BUCK7 2V0: 2000 mV
- [ 0.256751] ODROIDU2: Regulator BUCK8
- [ 0.377760] BUCK8 3V0: 3300 mV
- [ 0.378942] BUCK9 1V2: ODROIDU2: Disabled regulator
- [ 0.378960] BUCK9 1V2: 1200 mV
- [ 0.379363] s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.379429] s3c-i2c s3c2440-i2c.1: slave address 0x10
- [ 0.379450] s3c-i2c s3c2440-i2c.1: bus frequency set to 214 KHz
- [ 0.379605] s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.379667] s3c-i2c s3c2440-i2c.3: slave address 0x10
- [ 0.379688] s3c-i2c s3c2440-i2c.3: bus frequency set to 214 KHz
- [ 0.379787] s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.379843] s3c-i2c s3c2440-i2c.7: slave address 0x10
- [ 0.379864] s3c-i2c s3c2440-i2c.7: bus frequency set to 214 KHz
- [ 0.379958] s3c-i2c s3c2440-i2c.7: i2c-7: S3C I2C adapter
- [ 0.380020] s3c-i2c s3c2440-hdmiphy-i2c: slave address 0x10
- [ 0.380041] s3c-i2c s3c2440-hdmiphy-i2c: bus frequency set to 214 KHz
- [ 0.380195] s3c-i2c s3c2440-hdmiphy-i2c: i2c-8: S3C I2C adapter
- [ 0.380250] media: Linux media interface: v0.10
- [ 0.380296] Linux video capture interface: v2.00
- [ 0.380530] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.381136] Switching to clocksource mct-frc
- [ 0.387930] NET: Registered protocol family 2
- [ 0.388389] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.388520] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.388660] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.388722] TCP: reno registered
- [ 0.388744] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.388787] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.389030] NET: Registered protocol family 1
- [ 0.389204] Trying to unpack rootfs image as initramfs...
- [ 0.493581] Freeing initrd memory: 2076K
- [ 0.493787] CPU PMU: probing PMU on CPU 0
- [ 0.493814] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
- [ 0.495006] bounce pool size: 64 pages
- [ 0.500882] msgmni has been set to 1471
- [ 0.501909] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.501933] io scheduler noop registered
- [ 0.501946] io scheduler deadline registered
- [ 0.502096] io scheduler cfq registered (default)
- [ 0.508249] SoftPWM v0.2-acme initializing.
- [ 0.508264] Clock resolution is 1ns
- [ 0.508297] SoftPWM initialized.
- [ 0.510819] dma-pl330 dma-pl330.0: Loaded driver for PL330 DMAC-267056
- [ 0.510843] dma-pl330 dma-pl330.0: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.513080] dma-pl330 dma-pl330.1: Loaded driver for PL330 DMAC-267056
- [ 0.513104] dma-pl330 dma-pl330.1: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.513894] dma-pl330 dma-pl330.2: Loaded driver for PL330 DMAC-267056
- [ 0.513917] dma-pl330 dma-pl330.2: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.554372] exynos4210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 84) is a S3C6400/10
- [ 0.554610] exynos4210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 85) is a S3C6400/10
- [ 1.572766] console [ttySAC1] enabled
- [ 1.576621] exynos4210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 86) is a S3C6400/10
- [ 1.584343] exynos4210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 87) is a S3C6400/10
- [ 1.592172] [drm] Initialized drm 1.1.0 20060810
- [ 1.596784] i2c i2c-2: attached s5p_ddc into i2c adapter successfully
- [ 1.602931] i2c i2c-8: attached s5p_hdmiphy into i2c adapter successfully
- [ 1.609909] exynos-mixer s5p-mixer: probe start
- [ 1.614521] s5p-g2d s5p-g2d.0: The exynos g2d(ver 4.1) successfully probed
- [ 1.621618] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 1.627590] [drm] No driver support for vblank timestamp query.
- [ 1.633998] exynos-drm exynos-drm: No connectors reported connected with modes
- [ 1.640691] [drm] Cannot find any crtc or sizes - going 1024x768
- [ 1.669143] Console: switching to colour frame buffer device 128x48
- [ 1.677103] exynos-drm exynos-drm: fb0: frame buffer device
- [ 1.682740] exynos-drm exynos-drm: registered panic notifier
- [ 1.688382] [drm] Initialized exynos 1.0.0 20110530 on minor 0
- [ 1.694274] mali-utgard mali-utgard.0: start latency exceeded, new value 500 ns
- [ 1.701506] mali-utgard mali-utgard.0: state restore latency exceeded, new value 3542 ns
- [ 1.710873] Mali: init_mali_clock mali_clock c0605c68
- [ 1.716776] mali-utgard mali-utgard.0: stop latency exceeded, new value 459 ns
- [ 1.721893] mali-utgard mali-utgard.0: state save latency exceeded, new value 2083 ns
- [ 1.729929] pd-g3d: Power-off latency exceeded, new value 234208 ns
- [ 1.735956] Mali: Mali device driver loaded
- [ 1.745378] brd: module loaded
- [ 1.748378] loop: module loaded
- [ 1.748573] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.756281] s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 1.761270] s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 1.768716] s5p-ehci s5p-ehci: irq 102, io mem 0x12580000
- [ 1.781202] s5p-ehci s5p-ehci: USB 2.0 started, EHCI 1.00
- [ 1.784638] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.791098] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.798261] usb usb1: Product: S5P EHCI Host Controller
- [ 1.803421] usb usb1: Manufacturer: Linux 3.8.13.30 ehci_hcd
- [ 1.809061] usb usb1: SerialNumber: s5p-ehci
- [ 1.813607] hub 1-0:1.0: USB hub found
- [ 1.816934] hub 1-0:1.0: 3 ports detected
- [ 1.821125] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.827098] exynos-ohci exynos-ohci: Already power on PHY
- [ 1.832362] exynos-ohci exynos-ohci: EXYNOS OHCI Host Controller
- [ 1.838355] exynos-ohci exynos-ohci: new USB bus registered, assigned bus number 2
- [ 1.845910] exynos-ohci exynos-ohci: irq 102, io mem 0x12590000
- [ 1.910243] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.914427] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.921628] usb usb2: Product: EXYNOS OHCI Host Controller
- [ 1.927045] usb usb2: Manufacturer: Linux 3.8.13.30 ohci_hcd
- [ 1.932661] usb usb2: SerialNumber: exynos-ohci
- [ 1.937475] hub 2-0:1.0: USB hub found
- [ 1.940832] hub 2-0:1.0: 3 ports detected
- [ 1.945062] Initializing USB Mass Storage driver...
- [ 1.949692] usbcore: registered new interface driver usb-storage
- [ 1.955612] USB Mass Storage support registered.
- [ 2.076444] usb3503 0-0008: USB3503_SP_ILOCK = 0x32
- [ 2.131209] usb 1-2: new high-speed USB device number 2 using s5p-ehci
- [ 2.181204] usb3503 0-0008: switched to HUB mode
- [ 2.184034] usb3503 0-0008: usb3503_probe: probed on hub mode
- [ 2.211354] s3c-hsotg s3c-hsotg: regs f0080000, irq 103
- [ 2.214891] s3c-hsotg s3c-hsotg: Already power on PHY
- [ 2.218782] s3c-hsotg s3c-hsotg: EPs:15
- [ 2.222497] s3c-hsotg s3c-hsotg: dedicated fifos
- [ 2.227404] max77686-rtc max77686-rtc: max77686_rtc_probe
- [ 2.261558] usb 1-2: New USB device found, idVendor=0424, idProduct=9730
- [ 2.265286] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.331839] max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 2.338584] s5p-fimc exynos4-fimc.0: sclk_fimc rate is 176000000
- [ 2.342302] s5p-fimc exynos4-fimc.0: start latency exceeded, new value 708 ns
- [ 2.349413] s5p-fimc exynos4-fimc.0: state restore latency exceeded, new value 15958 ns
- [ 2.357444] s5p-fimc exynos4-fimc.0: stop latency exceeded, new value 458 ns
- [ 2.364443] s5p-fimc exynos4-fimc.0: state save latency exceeded, new value 3500 ns
- [ 2.364518] s5p-fimc exynos4-fimc.1: sclk_fimc rate is 176000000
- [ 2.378024] s5p-fimc exynos4-fimc.1: start latency exceeded, new value 459 ns
- [ 2.385148] s5p-fimc exynos4-fimc.1: state restore latency exceeded, new value 15084 ns
- [ 2.393169] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 416 ns
- [ 2.400152] s5p-fimc exynos4-fimc.1: state save latency exceeded, new value 2583 ns
- [ 2.401269] s5p-fimc exynos4-fimc.2: sclk_fimc rate is 176000000
- [ 2.413739] s5p-fimc exynos4-fimc.1: stop latency exceeded, new value 417 ns
- [ 2.420784] s5p-fimc exynos4-fimc.2: start latency exceeded, new value 417 ns
- [ 2.427917] s5p-fimc exynos4-fimc.2: state restore latency exceeded, new value 15125 ns
- [ 2.435921] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 459 ns
- [ 2.442961] s5p-fimc exynos4-fimc.2: state save latency exceeded, new value 2458 ns
- [ 2.446263] s5p-fimc exynos4-fimc.3: sclk_fimc rate is 176000000
- [ 2.456528] s5p-fimc exynos4-fimc.2: stop latency exceeded, new value 542 ns
- [ 2.463595] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 417 ns
- [ 2.470716] s5p-fimc exynos4-fimc.3: state restore latency exceeded, new value 14792 ns
- [ 2.478705] s5p-fimc exynos4-fimc.3: stop latency exceeded, new value 458 ns
- [ 2.485687] s5p-fimc exynos4-fimc.3: start latency exceeded, new value 458 ns
- [ 2.486537] s5p-fimc-md: Registered fimc.0.m2m as /dev/video10
- [ 2.486651] s5p-fimc-md: Registered fimc.0.capture as /dev/video11
- [ 2.486762] s5p-fimc-md: Registered fimc.1.m2m as /dev/video12
- [ 2.486873] s5p-fimc-md: Registered fimc.1.capture as /dev/video13
- [ 2.486977] s5p-fimc-md: Registered fimc.2.m2m as /dev/video14
- [ 2.487081] s5p-fimc-md: Registered fimc.2.capture as /dev/video15
- [ 2.487190] s5p-fimc-md: Registered fimc.3.m2m as /dev/video16
- [ 2.487294] s5p-fimc-md: Registered fimc.3.capture as /dev/video17
- [ 2.487936] s5p-jpeg s5p-jpeg.0: encoder device registered as /dev/video20
- [ 2.488039] s5p-jpeg s5p-jpeg.0: decoder device registered as /dev/video21
- [ 2.488043] s5p-jpeg s5p-jpeg.0: Samsung S5P JPEG codec
- [ 2.488140] sclk_mfc rate is: 220
- [ 2.488295] s5p-mfc s5p-mfc: decoder registered as /dev/video8
- [ 2.488398] s5p-mfc s5p-mfc: encoder registered as /dev/video9
- [ 2.488774] Exynos: Kernel Thermal management registered
- [ 2.488977] cpuidle: using governor ladder
- [ 2.489003] sdhci: Secure Digital Host Controller Interface driver
- [ 2.489004] sdhci: Copyright(c) Pierre Ossman
- [ 2.489086] s3c-sdhci exynos4-sdhci.2: clock source 2: mmc_busclk.2 (440000000 Hz)
- [ 2.489153] mmc0: no vqmmc regulator found
- [ 2.489161] mmc0: no vmmc regulator found
- [ 2.609735] s5p-fimc exynos4-fimc.3: state save latency exceeded, new value 3458 ns
- [ 2.611220] usb 1-3: new high-speed USB device number 3 using s5p-ehci
- [ 2.624229] pd-cam: Power-off latency exceeded, new value 236125 ns
- [ 2.626211] mmc0: SDHCI controller on samsung-hsmmc [exynos4-sdhci.2] using ADMA
- [ 2.637816] dw_mmc dw_mmc: Using internal DMA controller.
- [ 2.671212] DWMMC: Div 2 = 130
- [ 2.671258] dw_mmc dw_mmc: Version ID is 240a
- [ 2.671265] dw_mmc dw_mmc: DW MMC controller at irq 109, 32 bit host data width, 128 deep fifo
- [ 2.676504] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.676678] usbcore: registered new interface driver usbhid
- [ 2.676681] usbhid: USB HID core driver
- [ 2.676737] cec: Probe start
- [ 2.676740] s5p_cec_probe: pdata=e6cab940
- [ 2.676757] s5p_cec_mem_probe(): mapped cec_base to f007e000, size 0x1000
- [ 2.676880] cec: Requesting irq 146 for s5p-cec
- [ 2.676910] cec: probe successful
- [ 2.701432] max98090 1-0010: MAX98090 REVID=0x43
- [ 2.725584] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 400000Hz, actual 400000HZ div = 130)
- [ 2.738161] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.745806] hkdk-snd-max98090 hkdk-snd-max98090: HiFi <-> samsung-i2s.0 mapping ok
- [ 2.751563] usb 1-3: New USB device found, idVendor=0424, idProduct=3503
- [ 2.751850] TCP: cubic registered
- [ 2.751860] NET: Registered protocol family 17
- [ 2.751893] NET: Registered protocol family 15
- [ 2.751916] NET: Registered protocol family 35
- [ 2.773762] VFP support v0.3: [ 2.773798] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.774281] hub 1-3:1.0: USB hub found
- [ 2.774433] hub 1-3:1.0: 3 ports detected
- [ 2.785696] mmc1: BKOPS_EN bit is not set
- [ 2.786831] DWMMC: Div 2 = 1
- [ 2.786840] mmc_host mmc1: Bus speed (slot 0) = 104000000Hz (slot req 52000000Hz, actual 52000000HZ div = 1)
- [ 2.787305] mmc1: new high speed DDR MMC card at address 0001
- [ 2.787622] mmcblk0: mmc1:0001 008G92 7.28 GiB
- [ 2.787802] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB
- [ 2.787961] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB
- [ 2.788118] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB
- [ 2.789071] mmcblk0: p1 p2
- [ 2.790536] mmcblk0boot1: unknown partition table
- [ 2.791594] mmcblk0boot0: unknown partition table
- implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 2.853232] ThumbEE CPU extension supported.
- [ 2.857416] pd-gps: Power-off latency exceeded, new value 4212959 ns
- [ 2.861219] Registering SWP/SWPB emulation handler
- [ 2.861572] registered taskstats version 1
- [ 2.872565] pd-tv: Power-off latency exceeded, new value 625 ns
- [ 2.878482] pd-lcd0: Power-off latency exceeded, new value 625 ns
- [ 2.884519] pd-lcd1: Power-off latency exceeded, new value 6056667 ns
- [ 2.890869] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 20:57:24 UTC (946760244)
- [ 2.891114] pd-mfc: Power-off latency exceeded, new value 238250 ns
- [ 2.907845] exynos4_dvfs_hotplug_init, max(2000000),min(0)
- [ 2.910454] ALSA device list:
- [ 2.913312] #0: Built-in Audio
- [ 2.916917] Freeing init memory: 176K
- Loading, please wait...
- [ 2.960552] systemd-udevd[93]: starting version 204
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- [ 3.056445] usb 1-3.2: new full-speed USB device number 4 using s5p-ehci
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- [ 3.164692] usb 1-3.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 3.167841] usb 1-3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.175165] usb 1-3.2: Product: USB Receiver
- [ 3.175707] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.187818] usb 1-3.2: Manufacturer: Logitech
- Begin: Running /scripts/local-bottom ... done.
- done.
- Begin: Running /scripts/init-bottom ... done.
- run-init: /sbin/init: Accessing a corrupted shared library
- [ 3.251259] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
- [ 3.251259]
- [ 3.258179] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c041fbc8>] (panic+0x90/0x1e8)
- [ 3.264660] [<c041fbc8>] (panic+0x90/0x1e8) from [<c0029f98>] (do_exit+0x784/0x838)
- [ 3.272293] [<c0029f98>] (do_exit+0x784/0x838) from [<c002a078>] (do_group_exit+0x0/0xb0)
- [ 3.280477] [<c002a078>] (do_group_exit+0x0/0xb0) from [<fffff001>] (0xfffff001)
- [ 3.287886] CPU0: stopping
- [ 3.290588] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.299298] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.307865] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.316226] Exception stack(0xc05dff10 to 0xc05dff58)
- [ 3.321262] ff00: c05dff58 3b9aca00 c39af1df 00000000
- [ 3.329476] ff20: c390a57b 00000000 c16a03f0 00000000 c0609300 413fc090 c0603d90 00000000
- [ 3.337604] ff40: 00000018 c05dff58 c005c0fc c0319074 60000053 ffffffff
- [ 3.344174] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.352889] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.362470] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.371974] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.380491] [<c000f524>] (cpu_idle+0x98/0xfc) from [<c05b1acc>] (start_kernel+0x354/0x3b4)
- [ 3.388737] CPU2: stopping
- [ 3.391422] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.400197] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.408800] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.417137] Exception stack(0xe7073f40 to 0xe7073f88)
- [ 3.422157] 3f40: e7073f88 3b9aca00 c39af2b0 00000000 c38109b6 00000000 c16b03f0 00000000
- [ 3.430351] 3f60: c0609300 413fc090 c0603d90 00000000 00000018 e7073f88 c005c0fc c0319074
- [ 3.438521] 3f80: 60000053 ffffffff
- [ 3.441967] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.450710] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.460310] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.469754] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.478236] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.485257] CPU3: stopping
- [ 3.487929] [<c0014e68>] (unwind_backtrace+0x0/0xf8) from [<c00134d4>] (handle_IPI+0x120/0x14c)
- [ 3.496691] [<c00134d4>] (handle_IPI+0x120/0x14c) from [<c000855c>] (gic_handle_irq+0x60/0x68)
- [ 3.502870] [<c000855c>] (gic_handle_irq+0x60/0x68) from [<c000de40>] (__irq_svc+0x40/0x70)
- [ 3.513633] Exception stack(0xe7075f40 to 0xe7075f88)
- [ 3.518663] 5f40: e7075f88 3b9aca00 c39af356 00000000 c38131c0 00000000 c16b83f0 00000000
- [ 3.526851] 5f60: c0609300 413fc090 c0603d90 00000000 00000018 e7075f88 c005c0fc c0319074
- [ 3.535006] 5f80: 60000053 ffffffff
- [ 3.538463] [<c000de40>] (__irq_svc+0x40/0x70) from [<c0319074>] (cpuidle_wrap_enter+0x48/0x98)
- [ 3.547200] [<c0319074>] (cpuidle_wrap_enter+0x48/0x98) from [<c0318d88>] (cpuidle_enter_state+0x14/0x60)
- [ 3.556755] [<c0318d88>] (cpuidle_enter_state+0x14/0x60) from [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8)
- [ 3.566209] [<c0318e60>] (cpuidle_idle_call+0x8c/0xf8) from [<c000f524>] (cpu_idle+0x98/0xfc)
- [ 3.574700] [<c000f524>] (cpu_idle+0x98/0xfc) from [<4041cb88>] (0x4041cb88)
- [ 3.581716] drm_kms_helper: panic occurred, switching back to text console
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement