{"auto_reload_latest_snapshot": true, "current_printer_profile_guid": "6b3df448-eaee-4077-970d-0cdf276a6063", "default_printer_profile": {"movement_speed": 6000, "guid": "5d39248f-5e11-4c42-b7f4-810c7acc287e", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 3000, "z_hop": 0.5, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 4000, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Default Printer", "retract_length": 2.0, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 6000, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, "default_stabilization_profile": {"y_relative_path_loop": true, "y_relative": 50.0, "x_relative_path": "50.0", "guid": "3a94e945-f5d5-4655-909a-e61c1122cc1f", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 50.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Default Stabilization", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, "stabilization_type_options": [{"name": "Disabled", "value": "disabled"}, {"name": "Fixed Coordinate", "value": "fixed_coordinate"}, {"name": "List of Fixed Coordinates", "value": "fixed_path"}, {"name": "Relative Coordinate (0-100)", "value": "relative"}, {"name": "List of Relative Coordinates", "value": "relative_path"}], "snapshot_extruder_trigger_options": [{"visible": true, "name": "Ignore", "value": ""}, {"visible": true, "name": "Trigger", "value": "trigger_on"}, {"visible": true, "name": "Forbidden", "value": "forbidden"}], "show_position_state_changes": true, "stabilizations": [{"y_relative_path_loop": true, "y_relative": 50.0, "x_relative_path": "54.904,54.619,54.157,53.536,52.778,51.913,50.975,50.000,49.025,48.087,47.222,46.464,45.843,45.381,45.096,45.000,45.096,45.381,45.843,46.464,47.222,48.087,49.025,50.000,50.975,51.913,52.778,53.536,54.157,54.619,54.904,55.000", "guid": "801846db-3889-4d90-8496-9a473ee99cc4", "y_fixed_path_loop": true, "x_relative_path_invert_loop": false, "x_type": "relative_path", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative_path", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "Moves  print in a circular pattern around the center.  Best for prints with lower framerates, else the spiraling will be too fast.", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 50.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": false, "name": "Animated - Orbit", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50.975,51.913,52.778,53.536,54.157,54.619,54.904,55.000,54.904,54.619,54.157,53.536,52.778,51.913,50.975,50.000,49.025,48.087,47.222,46.464,45.843,45.381,45.096,45.000,45.096,45.381,45.843,46.464,47.222,48.087,49.025,50.000"}, {"y_relative_path_loop": true, "y_relative": 50.0, "x_relative_path": "50.0", "guid": "037bbb20-ed5d-4900-8a61-59a4b8ce5152", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 1.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Center Left", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 50.0, "x_relative_path": "50.0", "guid": "d35dbbe6-949e-4f97-b16f-c575d94ad062", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 50.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Center", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 1.0, "x_relative_path": "50.0", "guid": "c1738be7-fb3c-4191-b26a-b74151eceb9a", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 50.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Front Center", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 99.0, "x_relative_path": "50.0", "guid": "56e647e1-0643-4a84-8b40-209da3750f26", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 50.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Back Center", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 50.0, "x_relative_path": "45, 45.5, 46, 46.5, 47, 47.5, 48, 48.5, 49, 49.5, 50, 50.5, 51, 51.5, 52, 52.5, 53, 53.5, 54, 54.5, 55", "guid": "0d97b0ec-57ee-425b-a202-ea037910337d", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative_path", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "Animate the X carriage with a back-and-forth motion while keeping the Bed stable.  I like this one!", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 50.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Animated - Printing", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 1.0, "x_relative_path": "50.0", "guid": "7e12ac9f-6b7a-4fa8-9f6f-efa17c458afa", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 99.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Front Right", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 99.0, "x_relative_path": "100.0", "guid": "48413ad7-8345-4da5-af0b-a4f7a4350fc3", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 100.0, "x_relative": 99.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Back Right", "y_fixed_path": "0", "y_relative_print": 100.0, "y_relative_path": "100"}, {"y_relative_path_loop": true, "y_relative": 99.0, "x_relative_path": "50.0", "guid": "93036d8c-de74-4fc9-96aa-d9bb410df9b0", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "fixed_coordinate", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "fixed_coordinate", "y_fixed_coordinate": 230.0, "x_fixed_coordinate": 1.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 1.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Back Left", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 50.0, "x_relative_path": "50.0", "guid": "60eb5c1f-9b06-4205-9e99-840a8b76fd17", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 99.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Center Right", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}, {"y_relative_path_loop": true, "y_relative": 1.0, "x_relative_path": "50.0", "guid": "5655d63b-e23f-4e07-8ab0-c3bd3461e944", "y_fixed_path_loop": true, "x_relative_path_invert_loop": true, "x_type": "relative", "x_relative_path_loop": true, "x_fixed_path": "0", "y_type": "relative", "y_fixed_coordinate": 0.0, "x_fixed_coordinate": 0.0, "y_fixed_path_invert_loop": true, "description": "", "x_fixed_path_loop": true, "x_relative_print": 50.0, "x_relative": 1.0, "x_fixed_path_invert_loop": true, "y_relative_path_invert_loop": true, "name": "Fixed - Extruder at Front Left", "y_fixed_path": "0", "y_relative_print": 50.0, "y_relative_path": "50"}], "platform": "linux2", "renderings": [{"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - 15 FPS", "flip_v": false, "fps": 15.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "static", "min_fps": 2.0, "run_length_seconds": 5.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "55219852-8ece-401e-8374-b4a3a59e32d4", "bitrate": "5000k", "description": "Renders MP4 at a constant 15FPS. Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - Fixed Length - 00:05 + 1 second pre and post roll.", "flip_v": false, "fps": 30.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 1.0, "fps_calculation_type": "duration", "min_fps": 2.0, "run_length_seconds": 5.0, "post_roll_seconds": 1.0, "selected_watermark": "", "guid": "d4898ba7-8d27-4479-b7d8-34c063ae7a68", "bitrate": "5000k", "description": "Generates MP4 with a fixed length of 5 seconds. Adds 1 second of pre-roll using the first frame and one second post-roll using the last frame.  Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - Fixed Length - 00:15", "flip_v": false, "fps": 30.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "duration", "min_fps": 2.0, "run_length_seconds": 15.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "bc6ffaf5-38db-4ffe-8cfd-d8b94129853c", "bitrate": "5000k", "description": "Generates MP4 with a fixed length of 15 seconds. Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - 60 FPS", "flip_v": false, "fps": 60.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "static", "min_fps": 2.0, "run_length_seconds": 5.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "0b6e94ef-70ca-4798-83e8-e41ae632faf8", "bitrate": "5000k", "description": "Renders MP4 at a constant 60FPS. Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - Fixed Length - 00:10", "flip_v": false, "fps": 30.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "duration", "min_fps": 2.0, "run_length_seconds": 10.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "af3ef70a-1e0c-4a39-bdd6-4703d0eb42cf", "bitrate": "5000k", "description": "Generates MP4 with a fixed length of 10 seconds. Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - 30 FPS", "flip_v": false, "fps": 30.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "static", "min_fps": 2.0, "run_length_seconds": 5.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "e1789a71-6d23-48ee-82eb-ed4a8fa69cb2", "bitrate": "5000k", "description": "Renders MP4 at a constant 30FPS. Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - Fixed Length - 01:00", "flip_v": false, "fps": 30.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "duration", "min_fps": 2.0, "run_length_seconds": 60.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "d5f8d9e6-0a0f-4872-b41c-cdf101418e3c", "bitrate": "5000k", "description": "Generates MP4 with a fixed length of 60 seconds. Synchronizes with the default timelapse plugin."}, {"flip_h": false, "sync_with_timelapse": true, "name": "MP4 - Fixed Length - 00:30", "flip_v": false, "fps": 30.0, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0.0, "fps_calculation_type": "duration", "min_fps": 2.0, "run_length_seconds": 30.0, "post_roll_seconds": 0.0, "selected_watermark": "", "guid": "58ff3b6a-f597-4d0e-bcf6-1d2a9c2505cd", "bitrate": "5000k", "description": "Generates MP4 with a fixed length of 5 seconds. Synchronizes with the default timelapse plugin."}], "default_rendering_profile": {"flip_h": false, "sync_with_timelapse": true, "name": "Default Rendering", "flip_v": false, "fps": 30, "max_fps": 120.0, "output_format": "mp4", "output_template": "{FAILEDFLAG}{FAILEDSEPARATOR}{GCODEFILENAME}_{PRINTENDTIME}", "enabled": true, "rotate_90": false, "enable_watermark": false, "pre_roll_seconds": 0, "fps_calculation_type": "duration", "min_fps": 2.0, "run_length_seconds": 5, "post_roll_seconds": 0, "selected_watermark": "", "guid": "32d6ad28-0314-4a14-974c-0d7d92325f17", "bitrate": "5000k", "description": ""}, "printers": [{"movement_speed": 9000.0, "guid": "7c0eb400-5a3e-45b3-aae9-cc01918a9bb6", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 2400.0, "z_hop": 0.1, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "This is a beta profile, use at your own risk.", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.5, "abort_out_of_bounds": true, "retract_speed": 2400.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Monoprice Maker Select v2/Wanhao Duplicator i3 - Beta", "retract_length": 0.6, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 9000.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 6000.0, "guid": "c75d2855-61c4-4aad-8aa7-bf03ac0da632", "min_x": -20.0, "min_y": -9.0, "min_z": 0.0, "detract_speed": 3000.0, "z_hop": 0.5, "max_z": 250.0, "max_x": 289.0, "max_y": 289.0, "description": "This is a beta profile, use at your own risk.  Submitted by bluecamel.", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": 10.0, "origin_y": 10.0, "origin_x": 20.0, "priming_height": 0.75, "abort_out_of_bounds": false, "retract_speed": 4000.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Lulzbot Taz 6 - Beta", "retract_length": 2.0, "snapshot_command": "snap", "override_octoprint_print_volume": true, "z_hop_speed": 6000.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 60.0, "guid": "6b3df448-eaee-4077-970d-0cdf276a6063", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 0.0, "z_hop": 0.0, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 30.0, "axis_speed_display_units": "mm-sec", "auto_position_detection_commands": "", "name": "Prusa I3 Custom", "retract_length": 1.5, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 30.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 3000.0, "guid": "ad8d89b2-a579-4b3b-9249-6e5fab9348ca", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 2400.0, "z_hop": 0.0, "max_z": 240.0, "max_x": 220.0, "max_y": 220.0, "description": "This is a beta profile, use at your own risk.", "e_axis_default_mode": "absolute", "g90_influences_extruder": "use-octoprint-settings", "origin_z": 0.0, "origin_y": 0.0, "origin_x": 0.0, "priming_height": 0.5, "abort_out_of_bounds": true, "retract_speed": 2400.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Anet A8 - Beta", "retract_length": 4.5, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 3000.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": false}, {"movement_speed": 0.0, "guid": "73a5f790-3e54-42a5-b1d7-1da542d28ae8", "min_x": -100.0, "min_y": -100.0, "min_z": 0.0, "detract_speed": 0.0, "z_hop": 0.5, "max_z": 205.0, "max_x": 100.0, "max_y": 100.0, "description": "This is a beta profile, use at your own risk.", "e_axis_default_mode": "relative", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 0.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Dagoma Neva - Beta", "retract_length": 10.0, "snapshot_command": "snap", "override_octoprint_print_volume": true, "z_hop_speed": 0.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "relative", "auto_detect_position": true}, {"movement_speed": 2700.0, "guid": "20da9504-2860-452b-9c9a-7ad18d436407", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 2100.0, "z_hop": 0.4, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "This is a beta profile, use at your own risk.", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 2400.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Anycubic I3 Mega - Beta", "retract_length": 6.0, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 1000.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 6000.0, "guid": "88a173b1-0071-4d93-84fa-6662af279e5e", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 3000.0, "z_hop": 0.5, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "Genuine Prusa Mk2/Mk2S", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 4000.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Prusa Mk2/Mk2S", "retract_length": 2.0, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 6000.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 3600.0, "guid": "fdc7000c-9bc3-4dd2-bc2e-85f9ebcc3c7c", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 3000.0, "z_hop": 0.2, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "This is a beta profile, use at your own risk.", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": 0.0, "origin_y": 0.0, "origin_x": 0.0, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 5100.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "CR-10 - Beta", "retract_length": 6.5, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 1000.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 7200.0, "guid": "42d2f5ec-7cc8-4d65-aec8-9015ecff7db6", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 3000.0, "z_hop": 0.5, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "Genuine Prusa Mk2/Mk2S With Multi-Material", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 4800.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Prusa Mk2/Mk2S Multi Material", "retract_length": 4.0, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 7200.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}, {"movement_speed": 2500.0, "guid": "8adbbe77-d6ea-4e6e-8c7a-21a51733695a", "min_x": 0.0, "min_y": 0.0, "min_z": 0.0, "detract_speed": 2500.0, "z_hop": 0.0, "max_z": 0.0, "max_x": 0.0, "max_y": 0.0, "description": "This is a beta profile, use at your own risk.", "e_axis_default_mode": "require-explicit", "g90_influences_extruder": "use-octoprint-settings", "origin_z": null, "origin_y": null, "origin_x": null, "priming_height": 0.75, "abort_out_of_bounds": true, "retract_speed": 2500.0, "axis_speed_display_units": "mm-min", "auto_position_detection_commands": "", "name": "Irapid Black - Beta", "retract_length": 2.0, "snapshot_command": "snap", "override_octoprint_print_volume": false, "z_hop_speed": 0.0, "printer_position_confirmation_tolerance": 0.001, "units_default": "millimeters", "xyz_axes_default_mode": "require-explicit", "auto_detect_position": true}], "camera_exposure_type_options": [{"name": "Unknown - Let me know if you know what this option does.", "value": "0"}, {"name": "Manual", "value": "1"}, {"name": "Unknown - Let me know if you know what this option does.", "value": "2"}, {"name": "Auto - Aperture Priority Mode", "value": "3"}], "camera_powerline_frequency_options": [{"name": "50 HZ (Europe, China, India, etc)", "value": "50"}, {"name": "60 HZ (North/South America, Japan, etc", "value": "60"}], "position_restriction_shapes": [{"name": "Rectangle", "value": "rect"}, {"name": "Circle", "value": "circle"}], "axis_speed_display_unit_options": [{"name": "Millimeters per Minute (mm/min)", "value": "mm-min"}, {"name": "Millimeters per Second (mm/sec)", "value": "mm-sec"}], "rendering_file_templates": ["FAILEDFLAG", "FAILEDSTATE", "FAILEDSEPARATOR", "PRINTSTATE", "GCODEFILENAME", "DATETIMESTAMP", "PRINTENDTIME", "PRINTENDTIMESTAMP", "PRINTSTARTTIME", "PRINTSTARTTIMESTAMP", "SNAPSHOTCOUNT", "FPS"], "rendering_fps_calculation_options": [{"name": "Static FPS", "value": "static"}, {"name": "Fixed Run Length", "value": "duration"}], "current_rendering_profile_guid": "d5f8d9e6-0a0f-4872-b41c-cdf101418e3c", "auto_reload_frames": 20, "debug_profiles": [{"gcode_queuing_all": false, "extruder_change": false, "position_change": false, "description": "Test your timelapse settings without using any filament.  This feature is experimental, so make sure you unload your filament and monitor your printer during the test.", "trigger_height_change": false, "render_fail": false, "log_to_console": false, "is_test_mode": true, "render_sync": false, "snapshot_gcode_endcommand": false, "render_complete": false, "trigger_triggering": false, "snapshot_position": false, "snapshot_position_resume_print": false, "gcode_received_all": false, "print_state_changed": false, "guid": "3811da8f-182d-44bf-8fcb-95614e4daf1b", "trigger_layer_change": false, "trigger_create": false, "snapshot_download": false, "trigger_triggering_state": false, "snapshot_clean": false, "snapshot_position_return": false, "camera_settings_apply": false, "name": "Test Mode", "snapshot_save": false, "settings_save": false, "enabled": true, "settings_load": false, "extruder_triggered": false, "trigger_zhop": false, "trigger_wait_state": false, "trigger_time_unpaused": false, "trigger_time_remaining": false, "gcode_sent_all": false, "snapshot_gcode": false, "render_start": false, "position_command_received": false}, {"gcode_queuing_all": true, "extruder_change": true, "position_change": true, "description": "Logs all optional information during a live print.  This will create a very large log file, so only use this when necessary, or create a new debug profile containing less information.", "trigger_height_change": true, "render_fail": true, "log_to_console": false, "is_test_mode": false, "render_sync": true, "snapshot_gcode_endcommand": true, "render_complete": true, "trigger_triggering": true, "snapshot_position": true, "snapshot_position_resume_print": true, "gcode_received_all": true, "print_state_changed": true, "guid": "68d000d6-0ae3-40f4-9b16-bdcb882604a6", "trigger_layer_change": true, "trigger_create": true, "snapshot_download": true, "trigger_triggering_state": true, "snapshot_clean": true, "snapshot_position_return": true, "camera_settings_apply": true, "name": "Full Diagnostic - Live Print", "snapshot_save": true, "settings_save": true, "enabled": true, "settings_load": true, "extruder_triggered": true, "trigger_zhop": true, "trigger_wait_state": true, "trigger_time_unpaused": true, "trigger_time_remaining": true, "gcode_sent_all": true, "snapshot_gcode": true, "render_start": true, "position_command_received": true}, {"gcode_queuing_all": false, "extruder_change": false, "position_change": false, "description": "", "trigger_height_change": false, "render_fail": false, "log_to_console": false, "is_test_mode": false, "render_sync": false, "snapshot_gcode_endcommand": false, "render_complete": false, "trigger_triggering": false, "snapshot_position": false, "snapshot_position_resume_print": false, "gcode_received_all": false, "print_state_changed": false, "guid": "63547b6b-f7a6-441c-8ab2-a52dae7df3ac", "trigger_layer_change": false, "trigger_create": false, "snapshot_download": false, "trigger_triggering_state": false, "snapshot_clean": false, "snapshot_position_return": false, "camera_settings_apply": false, "name": "No Logging", "snapshot_save": false, "settings_save": false, "enabled": true, "settings_load": false, "extruder_triggered": false, "trigger_zhop": false, "trigger_wait_state": false, "trigger_time_unpaused": false, "trigger_time_remaining": false, "gcode_sent_all": false, "snapshot_gcode": false, "render_start": false, "position_command_received": false}, {"gcode_queuing_all": true, "extruder_change": true, "position_change": true, "description": "Logs all optional information during a test print.  This will create a very large log file, so only use this when necessary, or create a new debug profile containing less information.", "trigger_height_change": true, "render_fail": true, "log_to_console": false, "is_test_mode": true, "render_sync": true, "snapshot_gcode_endcommand": true, "render_complete": true, "trigger_triggering": true, "snapshot_position": true, "snapshot_position_resume_print": true, "gcode_received_all": true, "print_state_changed": true, "guid": "072f506e-3e5e-4e84-922b-fb4e01690398", "trigger_layer_change": true, "trigger_create": true, "snapshot_download": true, "trigger_triggering_state": true, "snapshot_clean": true, "snapshot_position_return": true, "camera_settings_apply": true, "name": "Full Diagnostic - Test Mode", "snapshot_save": true, "settings_save": true, "enabled": true, "settings_load": true, "extruder_triggered": true, "trigger_zhop": true, "trigger_wait_state": true, "trigger_time_unpaused": true, "trigger_time_remaining": true, "gcode_sent_all": true, "snapshot_gcode": true, "render_start": true, "position_command_received": true}], "default_camera_profile": {"exposure_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094850&group=1&value={value}", "sharpness": 128, "focus": 28, "backlight_compensation_enabled": false, "guid": "6b3361a7-82b7-4abf-b3d1-e3046d457d8c", "saturation_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963778&group=1&value={value}", "led1_mode": "auto", "autofocus_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094860&group=1&value={value}", "led1_mode_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062213&group=1&value={value}", "exposure_auto_priority_enabled": true, "username": "", "saturation": 128, "autofocus_enabled": true, "powerline_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963800&group=1&value={value}", "sharpness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963803&group=1&value={value}", "gain": 100, "password": "", "name": "Default Camera", "brightness": 128, "pan_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094856&group=1&value={value}", "zoom": 100, "contrast": 128, "contrast_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963777&group=1&value={value}", "white_balance_temperature": 4000, "jpeg_quality_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=1&group=3&value={value}", "brightness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963776&group=1&value={value}", "snapshot_request_template": "{camera_address}?action=snapshot", "white_balance_temperature_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963802&group=1&value={value}", "ignore_ssl_error": false, "tilt": 0, "exposure_type_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094849&group=1&value={value}", "delay": 125, "exposure_auto_priority_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094851&group=1&value={value}", "zoom_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094861&group=1&value={value}", "exposure_type": 1, "pan": 0, "led1_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062214&group=1&value={value}", "apply_settings_before_print": false, "description": "", "white_balance_auto": true, "white_balance_auto_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963788&group=1&value={value}", "led1_frequency": 0, "backlight_compensation_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963804&group=1&value={value}", "gain_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963795&group=1&value={value}", "snapshot_transpose": "", "focus_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094858&group=1&value={value}", "address": "http://127.0.0.1:8080/", "tilt_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094857&group=1&value={value}", "exposure": 250, "jpeg_quality": 90, "powerline_frequency": 60}, "show_extruder_state_changes": true, "default_snapshot_profile": {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "5d16f0cb-512c-476a-b32d-a10191ad0d0e", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "forbidden", "name": "Default Snapshot", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, "xyz_axes_default_mode_options": [{"name": "Require Explicit G90/G91", "value": "require-explicit"}, {"name": "Default To Relative", "value": "relative"}, {"name": "Default To Absolute", "value": "absolute"}], "snapshots": [{"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "95edf203-0387-4ace-ae4a-2dea6622979d", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Height 0.30mm - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "", "layer_trigger_on_extruding": "", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.3, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": true, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 0.30mm, but only when fully retracted and lifted.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "", "layer_trigger_on_detracting": "", "layer_trigger_on_detracting_start": ""}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "e153aab5-dcdf-43ab-95bd-89658c578978", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Layer Change - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "", "layer_trigger_on_extruding": "", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": true, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers after each layer change, but only when fully retracted and lifted.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "", "layer_trigger_on_detracting": "", "layer_trigger_on_detracting_start": ""}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": true, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "4662e695-a9cb-4024-931d-a122251c4fd6", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "trigger_on", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": true, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "forbidden", "name": "Gcode - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers when the snapshot command is detected, but only when fully retracted and lifted.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "49acbdc4-8dbd-47ef-88bb-eb1046a3302d", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "trigger_on", "layer_trigger_on_retracting_start": "forbidden", "name": "Every 02:00", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 120, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": true, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 120 seconds.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "", "timer_trigger_on_detracting_start": "forbidden", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "e85f374f-94cd-4c64-aaed-c5960be09ae8", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "trigger_on", "layer_trigger_on_retracting_start": "forbidden", "name": "Every 00:30", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": true, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 30 seconds.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "", "timer_trigger_on_detracting_start": "forbidden", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "a37d9d58-b630-48fc-985c-e0e43cd046dc", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": true, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "forbidden", "name": "Gcode", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Trigger when the snapshot gcode is detected.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": true, "gcode_trigger_on_detracted": "", "guid": "af47ce47-ed26-467d-bfa9-87a21d3217fc", "timer_trigger_on_partially_retracted": "", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "", "timer_trigger_on_retracting": "", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "", "layer_trigger_on_retracting_start": "forbidden", "name": "Every 01:00 - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 60, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": true, "timer_trigger_on_extruding_start": "", "description": "Triggers once every 60 seconds, but only when fully retracted and lifted.", "timer_trigger_on_primed": "", "lift_before_move": true, "timer_trigger_on_retracting_start": "", "timer_trigger_on_detracting_start": "", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "967383b3-2e40-4c02-b60b-1f7ce1fcc13f", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Height 0.20mm", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "trigger_on", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.2, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 0.20mm.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "forbidden"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "8a963b44-9af6-40a8-8808-d8fea96da6d9", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Height 0.15mm - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "", "layer_trigger_on_extruding": "", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.15, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": true, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 0.15mm, but only when fully retracted and lifted.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "", "layer_trigger_on_detracting": "", "layer_trigger_on_detracting_start": ""}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "0448674d-5dd6-4497-8cdf-1571596eae39", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Height - 0.15mm", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "trigger_on", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.15, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Suitable for prints with variable layer height, or prints with continuous height adjustment (vase mode).", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "forbidden"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "a77e6f7b-2430-4000-a402-dfbde9dd253e", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "trigger_on", "layer_trigger_on_retracting_start": "forbidden", "name": "Every 01:00", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 60, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": true, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 60 seconds.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "", "timer_trigger_on_detracting_start": "forbidden", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "f60be237-0f5e-4367-b60c-c3ddd524f5e1", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Height 0.30mm", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "trigger_on", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.3, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 0.30mm", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "forbidden"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "80c49818-d4ca-455c-a464-18f1f7c8d648", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "trigger_on", "name": "Layer Change", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "trigger_on", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers after each layer change.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": false, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "forbidden"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": true, "gcode_trigger_on_detracted": "", "guid": "0dbb7e23-4d30-4379-9060-e389e2a14997", "timer_trigger_on_partially_retracted": "", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "", "timer_trigger_on_retracting": "", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "", "layer_trigger_on_retracting_start": "forbidden", "name": "Every 00:30 - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": true, "timer_trigger_on_extruding_start": "", "description": "Triggers once every 30 seconds, but only when fully retracted and lifted.", "timer_trigger_on_primed": "", "lift_before_move": true, "timer_trigger_on_retracting_start": "", "timer_trigger_on_detracting_start": "", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": true, "gcode_trigger_on_detracted": "", "guid": "3ce4ee38-ec95-4d67-bc89-623383710301", "timer_trigger_on_partially_retracted": "", "layer_trigger_on_retracting": "forbidden", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "", "timer_trigger_on_retracting": "", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "trigger_on", "timer_trigger_on_extruding": "", "layer_trigger_on_retracting_start": "forbidden", "name": "Every 02:00 - ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_extruding": "", "layer_trigger_enabled": false, "cleanup_after_render_complete": true, "layer_trigger_height": 0.0, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": false, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 120, "position_restrictions": [], "layer_trigger_on_primed": "trigger_on", "timer_trigger_enabled": true, "timer_trigger_on_extruding_start": "", "description": "Triggers once every 120 seconds, but only when fully retracted and lifted.", "timer_trigger_on_primed": "", "lift_before_move": true, "timer_trigger_on_retracting_start": "", "timer_trigger_on_detracting_start": "", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "", "layer_trigger_on_detracted": "forbidden", "layer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracting_start": "trigger_on"}, {"gcode_trigger_on_partially_retracted": "", "gcode_trigger_require_zhop": false, "timer_trigger_require_zhop": false, "gcode_trigger_on_detracted": "", "guid": "e1550565-9d75-40ca-a869-e32ac1b1103f", "timer_trigger_on_partially_retracted": "forbidden", "layer_trigger_on_retracting": "", "gcode_trigger_on_retracted": "", "gcode_trigger_on_primed": "", "timer_trigger_on_detracted": "forbidden", "timer_trigger_on_retracting": "forbidden", "layer_trigger_on_retracted": "trigger_on", "gcode_trigger_on_retracting": "", "cleanup_after_render_fail": false, "gcode_trigger_enabled": false, "retract_before_move": true, "layer_trigger_on_extruding_start": "", "timer_trigger_on_extruding": "forbidden", "layer_trigger_on_retracting_start": "", "name": "Height 0.20mm -  ZHop & Retract only", "gcode_trigger_on_detracting": "", "layer_trigger_on_partially_retracted": "", "layer_trigger_on_extruding": "", "layer_trigger_enabled": true, "cleanup_after_render_complete": true, "layer_trigger_height": 0.2, "timer_trigger_on_retracted": "trigger_on", "layer_trigger_require_zhop": true, "gcode_trigger_on_extruding": "", "gcode_trigger_on_extruding_start": "", "gcode_trigger_on_retracting_start": "", "timer_trigger_seconds": 30, "position_restrictions": [], "layer_trigger_on_primed": "", "timer_trigger_enabled": false, "timer_trigger_on_extruding_start": "trigger_on", "description": "Triggers once every 0.20mm, but only when fully retracted and lifted.", "timer_trigger_on_primed": "trigger_on", "lift_before_move": true, "timer_trigger_on_retracting_start": "forbidden", "timer_trigger_on_detracting_start": "trigger_on", "gcode_trigger_on_detracting_start": "", "timer_trigger_on_detracting": "forbidden", "layer_trigger_on_detracted": "", "layer_trigger_on_detracting": "", "layer_trigger_on_detracting_start": ""}], "g90_influences_extruder_options": [{"name": "Use Octoprint Settings", "value": "use-octoprint-settings"}, {"name": "True", "value": "true"}, {"name": "False", "value": "false"}], "current_snapshot_profile_guid": "80c49818-d4ca-455c-a464-18f1f7c8d648", "e_axis_default_mode_options": [{"name": "Require Explicit M82/M83", "value": "require-explicit"}, {"name": "Default To Relative", "value": "relative"}, {"name": "Default To Absolute", "value": "absolute"}], "units_default_options": [{"name": "Require Explicit G90/G91", "value": "require-explicit"}, {"name": "Inches", "value": "inches"}, {"name": "Millimeters", "value": "millimeters"}], "cameras": [{"exposure_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094850&group=1&value={value}", "sharpness": 128, "focus": 28, "backlight_compensation_enabled": false, "guid": "feab7846-0a8a-4be5-a3f5-fb00d7a5f8b3", "saturation_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963778&group=1&value={value}", "led1_mode": "auto", "autofocus_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094860&group=1&value={value}", "led1_mode_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062213&group=1&value={value}", "exposure_auto_priority_enabled": true, "username": "", "saturation": 128, "autofocus_enabled": true, "powerline_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963800&group=1&value={value}", "sharpness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963803&group=1&value={value}", "gain": 128, "password": "", "name": "Logitech Webcam", "brightness": 128, "pan_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094856&group=1&value={value}", "zoom": 100, "contrast": 128, "contrast_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963777&group=1&value={value}", "white_balance_temperature": 4000, "jpeg_quality_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=1&group=3&value={value}", "brightness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963776&group=1&value={value}", "snapshot_request_template": "{camera_address}?action=snapshot", "white_balance_temperature_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963802&group=1&value={value}", "ignore_ssl_error": false, "tilt": 0, "exposure_type_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094849&group=1&value={value}", "delay": 500, "exposure_auto_priority_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094851&group=1&value={value}", "zoom_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094861&group=1&value={value}", "exposure_type": 0, "pan": 0, "led1_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062214&group=1&value={value}", "apply_settings_before_print": false, "description": "Tested using the Logitech HD Pro Webcam C920 and C310. ", "white_balance_auto": true, "white_balance_auto_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963788&group=1&value={value}", "led1_frequency": 0, "backlight_compensation_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963804&group=1&value={value}", "gain_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963795&group=1&value={value}", "snapshot_transpose": "", "focus_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094858&group=1&value={value}", "address": "http://127.0.0.1:8080/", "tilt_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094857&group=1&value={value}", "exposure": 400, "jpeg_quality": 90, "powerline_frequency": 60}, {"exposure_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094850&group=1&value={value}", "sharpness": 128, "focus": 28, "backlight_compensation_enabled": false, "guid": "354def78-9eea-409a-ad23-ee966dfff4ba", "saturation_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963778&group=1&value={value}", "led1_mode": "auto", "autofocus_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094860&group=1&value={value}", "led1_mode_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062213&group=1&value={value}", "exposure_auto_priority_enabled": true, "username": "", "saturation": 128, "autofocus_enabled": true, "powerline_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963800&group=1&value={value}", "sharpness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963803&group=1&value={value}", "gain": 100, "password": "", "name": "Default Webcam", "brightness": 128, "pan_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094856&group=1&value={value}", "zoom": 100, "contrast": 128, "contrast_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963777&group=1&value={value}", "white_balance_temperature": 4000, "jpeg_quality_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=1&group=3&value={value}", "brightness_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963776&group=1&value={value}", "snapshot_request_template": "{camera_address}?action=snapshot", "white_balance_temperature_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963802&group=1&value={value}", "ignore_ssl_error": false, "tilt": 0, "exposure_type_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094849&group=1&value={value}", "delay": 125, "exposure_auto_priority_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094851&group=1&value={value}", "zoom_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094861&group=1&value={value}", "exposure_type": 1, "pan": 0, "led1_frequency_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=168062214&group=1&value={value}", "apply_settings_before_print": false, "description": "Basically the same settings as the Logitech profile currently.  I will update the defaults if/when more cameras are tested and verified, especially regarding the request templates.", "white_balance_auto": true, "white_balance_auto_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963788&group=1&value={value}", "led1_frequency": 0, "backlight_compensation_enabled_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963804&group=1&value={value}", "gain_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=9963795&group=1&value={value}", "snapshot_transpose": "", "focus_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094858&group=1&value={value}", "address": "http://127.0.0.1:8080/", "tilt_request_template": "{camera_address}?action=command&dest=0&plugin=0&id=10094857&group=1&value={value}", "exposure": 250, "jpeg_quality": 90, "powerline_frequency": 60}], "version": "v0.3.1", "show_real_snapshot_time": false, "position_restriction_types": [{"name": "Must be inside", "value": "required"}, {"name": "Cannot be inside", "value": "forbidden"}], "rendering_output_format_options": [{"name": "AVI", "value": "avi"}, {"name": "FLV", "value": "flv"}, {"name": "VOB", "value": "vob"}, {"name": "MP4", "value": "mp4"}, {"name": "MPEG", "value": "mpeg"}, {"name": "GIF", "value": "gif"}], "show_navbar_icon": true, "show_navbar_when_not_printing": true, "is_octolapse_enabled": true, "show_trigger_state_changes": true, "default_debug_profile": {"gcode_queuing_all": false, "extruder_change": false, "position_change": false, "description": "", "trigger_height_change": false, "render_fail": false, "log_to_console": false, "is_test_mode": false, "render_sync": false, "snapshot_gcode_endcommand": false, "render_complete": false, "trigger_triggering": false, "snapshot_position": false, "snapshot_position_resume_print": false, "gcode_received_all": false, "print_state_changed": false, "guid": "08ad284a-76cc-4854-b8a0-f2658b784dd7", "trigger_layer_change": false, "trigger_create": false, "snapshot_download": false, "trigger_triggering_state": false, "snapshot_clean": false, "snapshot_position_return": false, "camera_settings_apply": false, "name": "Default Debug", "snapshot_save": false, "settings_save": false, "enabled": false, "settings_load": false, "extruder_triggered": false, "trigger_zhop": false, "trigger_wait_state": false, "trigger_time_unpaused": false, "trigger_time_remaining": false, "gcode_sent_all": false, "snapshot_gcode": false, "render_start": false, "position_command_received": false}, "current_stabilization_profile_guid": "93036d8c-de74-4fc9-96aa-d9bb410df9b0", "snapshot_transpose_options": [{"name": "None", "value": ""}, {"name": "Flip Left and Right", "value": "flip_left_right"}, {"name": "Flip Top and Bottom", "value": "flip_top_bottom"}, {"name": "Rotate 90 Degrees", "value": "rotate_90"}, {"name": "Rotate 180 Degrees", "value": "rotate_180"}, {"name": "Rotate 270 Degrees", "value": "rotate_270"}, {"name": "Transpose", "value": "transpose"}], "current_camera_profile_guid": "feab7846-0a8a-4be5-a3f5-fb00d7a5f8b3", "camera_led_1_mode_options": [{"name": "On", "value": "on"}, {"name": "Off", "value": "off"}, {"name": "Blink", "value": "blink"}, {"name": "Auto", "value": "auto"}], "show_position_changes": true, "current_debug_profile_guid": "63547b6b-f7a6-441c-8ab2-a52dae7df3ac"}