U-Boot TPL 2020.07 (Aug 09 2021 - 01:39:18)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.07 (Aug 09 2021 - 01:39:18 +0300)
Trying to boot from MMC1
NOTICE:  BL31: v2.4(release):
NOTICE:  BL31: Built : 02:45:36, Apr 10 2021
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2020.07 (Aug 09 2021 - 01:39:18 +0300)

Model: FriendlyElec NanoPi R2S
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x01)
MMC:   mmc@ff500000: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: FriendlyElec NanoPi R2S
Net:   eth0: ethernet@ff540000
starting USB...
Bus usb@ff580000: USB DWC2
Bus usb@ff5c0000: USB EHCI 1.00
Bus usb@ff5d0000: USB OHCI 1.0
scanning bus usb@ff580000 for devices... 1 USB Device(s) found
scanning bus usb@ff5c0000 for devices... 1 USB Device(s) found
scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0

Device 0: unknown device
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
247 bytes read in 5 ms (47.9 KiB/s)
1:      IPFIRE Spikerguy
Retrieving file: /initramfs-5.10.74-ipfire.img
7680512 bytes read in 339 ms (21.6 MiB/s)
Retrieving file: /vmlinuz-5.10.74-ipfire
25205248 bytes read in 1102 ms (21.8 MiB/s)
append: initrd=/initramfs-5.10.74-ipfire.img console=tty1 console=ttyS2,1500000 root=UUID=8e1c48bc-a1ae-44c0-96ff-a4d6ae4da0
Retrieving file: /dtb-5.10.74-ipfire/rockchip/rk3328-nanopi-r2s.dtb
1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0
=> ��VJ���D�UU�����Q�E�Q�ŭY��"��BUU�����U���VQ�����U����V�啥U���ꥅ��*QU��
tt-C�C�W�Kv�������������������������������RjU��Zit�U]����Q   �Q�U��V*"�QUU�����U��Q��������Z��Z�ի�)i+��.U��ם�R���m�h5�h��FuS��
WdW��k[��u�vW�Kh5G��v-���4�R�������������������}�����R�                                          ����סjjT�]ժQUU��R�Q�z���.Uk]���U�/��ZV�խi+��.���R�P�ҵ[k
U-Boot TPL 2020.07 (Aug 09 2021 - 01:39:18)
DDR4, 333MHz
BW=32 Col=10 Bk=4 BG=2 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.07 (Aug 09 2021 - 01:39:18 +0300)
Trying to boot from MMC1
NOTICE:  BL31: v2.4(release):
NOTICE:  BL31: Built : 02:45:36, Apr 10 2021
NOTICE:  BL31:Rockchip release version: v1.2


U-Boot 2020.07 (Aug 09 2021 - 01:39:18 +0300)

Model: FriendlyElec NanoPi R2S
DRAM:  1022 MiB
PMIC:  RK8050 (on=0x40, off=0x01)
MMC:   mmc@ff500000: 1
Loading Environment from MMC... *** Warning - bad CRC, using default environment

In:    serial@ff130000
Out:   serial@ff130000
Err:   serial@ff130000
Model: FriendlyElec NanoPi R2S
Net:   eth0: ethernet@ff540000
starting USB...
Bus usb@ff580000: USB DWC2
Bus usb@ff5c0000: USB EHCI 1.00
Bus usb@ff5d0000: USB OHCI 1.0
scanning bus usb@ff580000 for devices... 1 USB Device(s) found
scanning bus usb@ff5c0000 for devices... 1 USB Device(s) found
scanning bus usb@ff5d0000 for devices... 1 USB Device(s) found
       scanning usb for storage devices... 0 Storage Device(s) found
Hit any key to stop autoboot:  0

Device 0: unknown device
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
247 bytes read in 5 ms (47.9 KiB/s)
1:      IPFIRE Spikerguy
Retrieving file: /initramfs-5.10.74-ipfe.img
7680512 bytes read in 339 ms (21.6 MiB/s)
Retrieving file: /vmlinuz-5.10.74-ipfire
25205248 bytes read in 1102 ms (21.8 MiB/s)
append: initrd=/initramfs-5.10.74-ipfire.img console=tty1 console=ttyS2,1500000 root=UUID=8e1c48bc-a1ae-44c0-96ff-a4d6ae4dac5c ro panic=10
Retrieving file: /dtb-5.10.74-ipfire/rockchip/rk3328-nanopi-r2s.dtb
36407 bytes read in 7 ms (5 MiB/s)
## Flattened Device Tree blob at 01f00000
   Booting using the fdt blob at 0x1f00000
   Loading Ramdisk to 3d7c8000, end 3df1b200 ... OK
   Loading Device Tree to 000000003d7bc000, end 000000003d7c7e36 ... OK

Starting kernel ...

Booting Linux on physical CPU 0x0000000000 [0x410fd034]
Linux version 5.10.74-ipfire (root@arm64-01.dub.ipfire.org) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP Tue Oct 19 19:49:06 GMT 2021
Machine model: FriendlyElec NanoPi R2S
efi: UEFI not found.
Zone ranges:
  DMA      [mem 0x0000000000200000-0x000000003fffffff]
  DMA32    empty
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000200000-0x000000003fffffff]
Initmem setup node 0 [mem 0x0000000000200000-0x000000003fffffff]
cma: Reserved 8 MiB at 0x000000003f400000
psci: probing for conduit method from DT.
psci: PSCIv1.1 detected in firmware.
psci: Using standard PSCI v0.2 function IDs
psci: MIGRATE_INFO_TYPE not supported.
psci: SMC Calling Convention v1.2
percpu: Embedded 30 pages/cpu s83352 r8192 d31336 u122880
Detected VIPT I-cache on CPU0
CPU features: detected: ARM erratum 845719
Built 1 zonelists, mobility grouping on.  Total pages: 257544
Kernel command line: initrd=/initramfs-5.10.74-ipfire.img console=tty1 console=ttyS2,1500000 root=UUID=8e1c48bc-a1ae-44c0-96ff-a4d6ae4dac5c ro panic=10
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mem auto-init: stack:byref_all(zero), heap alloc:on, heap free:off
Memory: 984992K/1046528K available (11712K kernel code, 2598K rwdata, 4988K rodata, 5184K init, 504K bss, 53344K reserved, 8192K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x38/0x5cc with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
ftrace: allocating 36838 entries in 144 pages
ftrace: allocated 144 pages with 2 groups
rcu: Hierarchical RCU implementation.
rcu:    RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
        Rude variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
GIC: Using split EOI/Deactivate mode
arch_timer: cp15 timer(s) running at 24.00MHz (phys).
clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
Console: colour dummy device 80x25
printk: console [tty1] enabled
Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
rcu: Hierarchical SRCU implementation.
EFI services will not be available.
smp: Bringing up secondary CPUs ...
Detected VIPT I-cache on CPU1
CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Detected VIPT I-cache on CPU2
CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Detected VIPT I-cache on CPU3
CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
smp: Brought up 1 node, 4 CPUs
SMP: Total of 4 processors activated.
CPU features: detected: 32-bit EL0 Support
CPU features: detected: CRC32 itructions
CPU: All CPU(s) started at EL2
alternatives: patching kernel code
devtmpfs: initialized
Registered cp15_barrier emulation handler
Registered setend emulation handler
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
DMI not present or invalid.
NET: Registered protocol family 16
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
cpuidle: using governor menu
hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
ASID allocator initialised with 65536 entries
Serial: AMBA PL011 UART driver
cryptd: max_cpu_qlen set to 1000
ACPI: Interpreter disabled.
reg-fixed-voltage sdmmregulator: Failed to register regulator: -517
iommu: Default domn type: Translated
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource arch_sys_counter
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI: disabled
NET: Registered protocol family 2
IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
TCP: Hash tables configured (established 8192 bind 8192)
UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
NET: Registered protocol family 1
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 7500K
hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
Initialise system trusted keyrings
workingset: timestamp_bits=46 max_order=18 bucket_order=0
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
dma-pl330 ff1f0000.dmac: Loaded driver for PL330 DMAC-241330
dma-pl330 ff1f0000.dmac:        DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
printk: console [ttyS2] disabled
ff130000.serial: ttyS2 at MMIO 0xff130000 (irq = 20, base_baud = 1500000) is a 16550A
printk: console [ttyS2] enabled
Serial: AMBA driver
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
dwc2 ff580000.usb: supply vusb_d not found, using dummy regulator
dwc2 ff580000.usb: supply vusb_a not found, using dummy regulator
dwc2 ff580000.usb: DWC OTG Controller
dwc2 ff580000.usb: new USB bus registered, assigned bus number 1
dwc2 ff580000.usb: irq 35, io mem 0xff580000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 5.10.74-ipfire dwc2_hsotg
usb usb1: SerialNumber: ff580000.usb
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform ff5c0000.usb: EHCI Host Controller
ehci-platform ff5c0000.usb: new USB bus registered, assigned bus number 2
ehci-platform ff5c0000.usb: irq 36, io mem 0xff5c0000
ehci-platform ff5c0000.usb: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2:  EHCI Host Controller
usb usb2: Manufacturer: Linux 5.10.74-ipfire ehci_hcd
usb usb2: SerialNumber: ff5c0000.usb
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
ehci-orion: EHCI orion driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform ff5d0000.usb: Generic Platform OHCI controller
ohci-platform ff5d0000.usb: new USB bus registered, assigned bus number 3
ohci-platform ff5d0000.usb: irq 37, io mem 0xff5d0000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: Generic Platform OHCI controller
usb usb3: Manufacturer: Linux 5.10.74-ipfire ohci_hcd
usb usb3: SerialNumber: ff5d0000.usb
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common fomice
rk808 1-0018: chip id: 0x8050
rk808-regulator rk808-regulator: there is no dvs0 gpio
rk808-regulator rk808-regulator: there is no dvs1 gpio
vdd_log: supplied by vdd_5v
vdd_arm: supplied by vdd_5v
vcc_ddr: supplied by vdd_5v
vcc_io_33: supplied by vdd_5v
vcc_18: supplied by vcc_io_33
vcc18_emmc: supplied by vcc_io_33
vdd_10: supplied by vdd_5v
rk808-rtc rk808-rtc: registered as rtc0
rk808-rtc rk808-rtc: setting system clock to 2016-01-21T08:50:30 UTC (1453366230)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
Synopsys Designware Multimedia Card Interface Driver
sdhci-pltfm: SDHCI platform and OF driver helper
dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
dwmmc_rockchip ff500000.mmc: Version ID is 270a
dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
ledtrig-cpu: registered to indicate activity on CPUs
SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
Initializing XFRM netlink socket
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Bridge firewalling registered
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'IPFire.org: Build time autogenerated kernel key: b0761674b4357b57feab815f85d5ef8a95eb37d7'
vcc_sd: supplied by vcc_io_33
debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
debugfs: Directory 'power-domain' with parent 'pm_genpd' already present!
dwmmc_rockchip ff500000.mmc: IDMAC supports 32-bit address mode.
dwmmc_rockchip ff500000.mmc: Using internal DMA controller.
dwmmc_rockchip ff500000.mmc: Version ID is 270a
input: keys as /devices/platform/keys/input/input0
dwmmc_rockchip ff500000.mmc: DW MMC controller at irq 33,32 bit host data width,256 deep fifo
dw-apb-uart ff130000.serial: forbid DMA for kernel console
mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
Freeing unused kernel memory: 5184K
Checked W+X mappings: passed, no W+X pages found
Run /init as init process
random: fast init done
mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
dwmmc_rockchip ff500000.mmc: Successfully tuned phase to 127
mmc0: new ultra high speed SDR50 SDHC card at address aaaa
mmcblk0: mmc0:aaaa SS16G 14.8 GiB
 mmcblk0: p1 p2 p3
dracut: dracut-038
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
udevd[234]: starting eudev-3.2.6


dracut Warning: Could not boot.
dracut Warning: Could not boot.
dracut Warning: /dev/disk/by-uuid/8e1c48bc-a1ae-44c0-96ff-a4d6ae4dac5c does not exist
dracut Warning: /dev/disk/by-uuid/8e1c48bc-a1ae-44c0-96ff-a4d6ae4dac5c does not exist


Generating "/run/initramfs/rdsosreport.txt"
You might want to save "/run/initramfs/rdsosreport.txt" to a USB stick or