Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Texas Instruments X-Loader 1.4.4ss (Jan 4 2011 - 12:38:07)
- Beagle Rev C4
- Reading boot sector
- Loading u-boot.bin from mmc
- U-Boot 2010.03-dirty (Feb 02 2011 - 22:55:29)
- OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max clock-720Mhz
- OMAP3 Beagle board + LPDDR/NAND
- I2C: ready
- DRAM: 256 MB
- NAND: 256 MiB
- In: serial
- Out: serial
- Err: serial
- Probing for expansion boards, if none are connected you'll see a harmless I2C error.
- timed out in wait_for_pin: I2C_STAT=0
- I2C read: I/O error
- Unrecognized expansion board: 0
- Beagle Rev C4
- Die ID #167c00040000000004039ba60801f009
- Hit any key to stop autoboot: 3 2 1 0
- mmc1 is available
- reading uImage
- 4636876 bytes read
- ## Booting kernel from Legacy Image at 80300000 ...
- Image Name: 2.6.37-x2
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4636812 Bytes = 4.4 MB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.37-x2 (root@beagle-256mb-0) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP PREEMPT Wed Feb 2 20:59:40 UTC 2011
- [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] Beagle expansionboard: unknown
- [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp 720mhz )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @c0b8d000 s7936 r8192 d12544 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60416
- [ 0.000000] Kernel command line: console=ttyO2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=12MB omapfb.mode=dvi:1280x720MR-16@60 fixrtc buddy=unknown
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] allocated 1310720 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 238MB = 238MB total
- [ 0.000000] Memory: 230376k/230376k available, 31768k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc0052000 ( 296 kB)
- [ 0.000000] .text : 0xc0052000 - 0xc085a5f0 (8226 kB)
- [ 0.000000] .data : 0xc085c000 - 0xc08c46e0 ( 418 kB)
- [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Preemptable hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
- [ 0.000000] omap_hwmod: sr1_fck: missing clockdomain for sr1_fck.
- [ 0.000000] omap_hwmod: sr2_fck: missing clockdomain for sr2_fck.
- [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Calibrating delay loop... 515.72 BogoMIPS (lpj=2015232)
- [ 0.000000] pid_max: default: 32768 minimum: 301
- [ 0.000000] Security Framework initialized
- [ 0.000000] AppArmor: AppArmor initialized
- [ 0.000000] Mount-cache hash table entries: 512
- [ 0.000000] Initializing cgroup subsys ns
- [ 0.000000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Initializing cgroup subsys memory
- [ 0.000000] Initializing cgroup subsys devices
- [ 0.000000] Initializing cgroup subsys freezer
- [ 0.000000] CPU: Testing write buffer coherency: ok
- [ 0.000000] Brought up 1 CPUs
- [ 0.000000] SMP: Total of 1 processors activated (515.72 BogoMIPS).
- [ 0.000000] devtmpfs: initialized
- [ 0.000000] regulator: core version 0.5
- [ 0.000000] regulator: dummy:
- [ 0.000000] NET: Registered protocol family 16
- [ 0.000000] OMAP3 Beagle Rev: C4
- [ 0.000000] Found NAND on CS0
- [ 0.000000] Registering NAND on CS0
- [ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported.
- [ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.000000] OMAP DMA hardware revision 4.0
- [ 0.009307] bio: create slab <bio-0> at 0
- [ 0.010833] SCSI subsystem initialized
- [ 0.012878] usbcore: registered new interface driver usbfs
- [ 0.013031] usbcore: registered new interface driver hub
- [ 0.013336] usbcore: registered new device driver usb
- [ 0.024017] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
- [ 0.035217] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.035308] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.036254] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.064941] regulator: VUSB1V5: 1500 mV normal standby
- [ 0.065521] regulator: VUSB1V8: 1800 mV normal standby
- [ 0.066162] regulator: VUSB3V1: 3100 mV normal standby
- [ 0.083038] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.097595] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- [ 0.098205] regulator: VDAC: 1800 mV normal standby
- [ 0.098754] regulator: VDVI: 1800 mV normal standby
- [ 0.099426] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 0.112731] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
- [ 0.128845] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
- [ 0.130493] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.131347] NetLabel: Initializing
- [ 0.131408] NetLabel: domain hash size = 128
- [ 0.131439] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.131530] NetLabel: unlabeled traffic allowed by default
- [ 0.131622] Switching to clocksource 32k_counter
- [ 0.149078] AppArmor: AppArmor Filesystem Enabled
- [ 0.167663] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- [ 0.172912] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.173736] NET: Registered protocol family 2
- [ 0.174255] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.175933] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.176208] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
- [ 0.176544] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.176574] TCP reno registered
- [ 0.176605] UDP hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.176696] UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- [ 0.177185] NET: Registered protocol family 1
- [ 0.178070] RPC: Registered udp transport module.
- [ 0.178131] RPC: Registered tcp transport module.
- [ 0.178161] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.179748] PMU: registered new PMU device of type 0
- [ 0.257080] platform iva.0: Enabled OPP corresponding to 720MHz
- [ 0.257141] omap_dsp_init: 600000 bytes @ 8ee00000
- [ 0.258026] audit: initializing netlink socket (disabled)
- [ 0.258148] type=2000 audit(0.484:1): initialized
- [ 0.449798] VFS: Disk quotas dquot_6.5.2
- [ 0.450378] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.458251] fuse init (API version 7.15)
- [ 0.460937] Btrfs loaded
- [ 0.461029] msgmni has been set to 449
- [ 0.463806] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.463867] io scheduler noop registered
- [ 0.463897] io scheduler deadline registered
- [ 0.464080] io scheduler cfq registered (default)
- [ 0.523193] OMAP DSS rev 2.0
- [ 0.523345] OMAP DISPC rev 3.0
- [ 0.523406] OMAP VENC rev 2
- [ 0.853454] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.968353] omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- [ 0.999328] omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- [ 1.030548] omap-hsuart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
- [ 1.777374] console [ttyO2] enabled
- [ 1.815673] brd: module loaded
- [ 1.825012] loop: module loaded
- [ 1.832672] omap2-nand driver initializing
- [ 1.837524] ONFI flash detected
- [ 1.841369] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron )
- [ 1.848449] Creating 5 MTD partitions on "omap2-nand.0":
- [ 1.854095] 0x000000000000-0x000000080000 : "X-Loader"
- [ 1.861663] 0x000000080000-0x000000260000 : "U-Boot"
- [ 1.869537] 0x000000260000-0x000000280000 : "U-Boot Env"
- [ 1.877044] 0x000000280000-0x000000680000 : "Kernel"
- [ 1.885894] 0x000000680000-0x000010000000 : "File System"
- [ 2.004028] OneNAND driver initializing
- [ 2.008941] usbcore: registered new interface driver cdc_ether
- [ 2.015289] usbcore: registered new interface driver rndis_host
- [ 2.022369] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 4.038330] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 4.044738] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 4.053924] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- [ 4.069671] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 4.076934] hub 1-0:1.0: USB hub found
- [ 4.081024] hub 1-0:1.0: 3 ports detected
- [ 4.117340] Initializing USB Mass Storage driver...
- [ 4.122650] usbcore: registered new interface driver usb-storage
- [ 4.129058] USB Mass Storage support registered.
- [ 4.134094] g_ether gadget: using random self ethernet address
- [ 4.140319] g_ether gadget: using random host ethernet address
- [ 4.148315] usb0: MAC 3e:05:1b:ab:15:a3
- [ 4.152374] usb0: HOST MAC 0e:11:99:95:fd:80
- [ 4.156982] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 4.164031] g_ether gadget: g_ether ready
- [ 4.168304] musb_hdrc musb_hdrc: MUSB HDRC host driver
- [ 4.174194] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
- [ 4.187805] hub 2-0:1.0: USB hub found
- [ 4.191833] hub 2-0:1.0: 1 port detected
- [ 4.197021] mice: PS/2 mouse device common for all mice
- [ 4.203948] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
- [ 4.216003] i2c /dev entries driver
- [ 4.220886] lirc_dev: IR Remote Control driver registered, major 251
- [ 4.227783] IR RC5 (streamzap) protocol handler initialized
- [ 4.233703] IR LIRC bridge handler initialized
- [ 4.238586] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517
- [ 4.246856] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 4.254272] device-mapper: uevent: version 1.0.3
- [ 4.260040] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
- [ 4.269531] device-mapper: multipath: version 1.1.1 loaded
- [ 4.275451] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 4.283355] cpuidle: using governor ladder
- [ 4.288146] cpuidle: using governor menu
- [ 4.292663] sdhci: Secure Digital Host Controller Interface driver
- [ 4.299316] sdhci: Copyright(c) Pierre Ossman
- [ 4.308807] mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
- [ 4.320404] OMAP3 Beagle/Devkit8000 SoC init
- [ 4.404052] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok
- [ 4.411590] ALSA device list:
- [ 4.414947] usb 1-2: new high speed USB device using ehci-omap and address 2
- [ 4.422485] #0: omap3beagle
- [ 4.428161] TCP cubic registered
- [ 4.433410] NET: Registered protocol family 10
- [ 4.441528] lo: Disabled Privacy Extensions
- [ 4.449768] NET: Registered protocol family 17
- [ 4.454895] Registering the dns_resolver key type
- [ 4.459930] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- [ 4.468414] ThumbEE CPU extension supported.
- [ 4.480621] Power Management for TI OMAP3.
- [ 4.485992] sr_init: No PMIC hook to init smartreflex
- [ 4.491851] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
- [ 4.500427] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
- [ 4.512145] SmartReflex Class3 initialized
- [ 4.527648] clock: disabling unused clocks to save power
- [ 4.535003] registered taskstats version 1
- [ 4.541137] fbcvt: 1280x720@60: CVT Name - .921M9-R
- [ 4.572113] Console: switching to colour frame buffer device 160x45
- [ 4.593231] hub 1-2:1.0: USB hub found
- [ 4.599792] hub 1-2:1.0: 4 ports detected
- [ 4.604400] regulator_init_complete: incomplete constraints, leaving VDAC on
- [ 4.615203] md: Waiting for all devices to be available before autodetect
- [ 4.622741] md: If you don't use raid, use raid=noautodetect
- [ 4.630554] md: Autodetecting RAID arrays.
- [ 4.635162] md: Scanned 0 and added 0 devices.
- [ 4.640106] md: autorun ...
- [ 4.643157] md: ... autorun DONE.
- [ 4.647155] Waiting for root device /dev/mmcblk0p2...
- [ 4.656829] mmc0: new SDHC card at address dc0a
- [ 4.666503] mmcblk0: mmc0:dc0a SD04G 3.69 GiB
- [ 4.681335] mmcblk0: p1 p2
- [ 4.779876] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- [ 4.797851] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
- [ 4.820983] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- [ 4.833068] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- [ 4.898498] usb 1-2.2: new full speed USB device using ehci-omap and address 3
- [ 5.035858] hub 1-2.2:1.0: USB hub found
- [ 5.046813] hub 1-2.2:1.0: 3 ports detected
- [ 5.140411] usb 1-2.3: new low speed USB device using ehci-omap and address 4
- [ 5.359283] usb 1-2.2.1: new full speed USB device using ehci-omap and address 5
- [ 5.579132] usb 1-2.2.2: new full speed USB device using ehci-omap and address 6
- [ 5.788909] usb 1-2.2.3: new full speed USB device using ehci-omap and address 7
- [ 6.899505] g_ether gadget: high speed config #1: CDC Ethernet (EEM)
- [ 22.018920] EXT4-fs (mmcblk0p2): recovery complete
- [ 22.037322] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 22.050445] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 22.069122] devtmpfs: mounted
- [ 22.076568] Freeing init memory: 296K
- Ubuntu 10.10 omap ttyO2
- omap login: boot
- Unknown command 'boot' - try 'help'
- OMAP3 beagleboard.org # boot
- mmc1 is available
- reading uImage
- 4431780 bytes read
- ## Booting kernel from Legacy Image at 80300000 ...
- Image Name: 2.6.35.9-l9
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4431716 Bytes = 4.2 MB
- Load Address: 80008000
- Entry Point: 80008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.35.9-l9 (root@beagle-256mb-0) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 PREEMPT Fri Dec 3 08:13:15 UTC 2010
- [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
- [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] Machine: OMAP3 Beagle Board
- [ 0.000000] Beagle expansionboard: ${buddy}
- [ 0.000000] Memory policy: ECC disabled, Data cache writeback
- [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
- [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
- [ 0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} omapfb.debug=y fixrtc buddy=${buddy} mpurate=${mpurate}
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] allocated 1310720 bytes of page_cgroup
- [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- [ 0.000000] Memory: 128MB 128MB = 256MB total
- [ 0.000000] Memory: 230472k/230472k available, 31672k reserved, 0K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- [ 0.000000] .init : 0xc0008000 - 0xc004a000 ( 264 kB)
- [ 0.000000] .text : 0xc004a000 - 0xc07f6000 (7856 kB)
- [ 0.000000] .data : 0xc0864000 - 0xc08c3820 ( 383 kB)
- [ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU-based detection of stalled CPUs is disabled.
- [ 0.000000] Verbose stalled-CPUs detection is disabled.
- [ 0.000000] NR_IRQS:402
- [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
- [ 0.000000] omap_hwmod: l3_hwmod: cannot be enabled (3)
- [ 0.000000] omap_hwmod: l4_core_hwmod: cannot be enabled (3)
- [ 0.000000] omap_hwmod: l4_per_hwmod: cannot be enabled (3)
- [ 0.000000] omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
- [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
- [ 0.000000] GPMC revision 5.0
- [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- [ 0.000000] Total of 96 interrupts on 1 active controller
- [ 0.000000] OMAP GPIO hardware version 2.5
- [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Calibrating delay loop... 520.92 BogoMIPS (lpj=2031616)
- [ 0.000000] pid_max: default: 32768 minimum: 301
- [ 0.000000] Security Framework initialized
- [ 0.000000] Smack: Initializing.
- [ 0.000000] Mount-cache hash table entries: 512
- [ 0.000000] Initializing cgroup subsys ns
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Initializing cgroup subsys memory
- [ 0.000000] Initializing cgroup subsys devices
- [ 0.000000] Initializing cgroup subsys freezer
- [ 0.000000] CPU: Testing write buffer coherency: ok
- [ 0.000000] devtmpfs: initialized
- [ 0.000000] regulator: core version 0.5
- [ 0.000000] NET: Registered protocol family 16
- [ 0.000000] OMAP3 Beagle Rev: C4
- [ 0.000000] Found NAND on CS0
- [ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
- [ 0.000213] OMAP DMA hardware revision 4.0
- [ 0.000640] omap-mcpdm omap-mcpdm: unable to get pdm_ck: -2
- [ 0.000732] omap-mcpdm: probe of omap-mcpdm failed with error -2
- [ 0.007446] bio: create slab <bio-0> at 0
- [ 0.008758] SCSI subsystem initialized
- [ 0.010223] usbcore: registered new interface driver usbfs
- [ 0.010375] usbcore: registered new interface driver hub
- [ 0.010681] usbcore: registered new device driver usb
- [ 0.011138] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
- [ 0.014221] twl4030: PIH (irq 7) chaining IRQs 368..375
- [ 0.014282] twl4030: power (irq 373) chaining IRQs 376..383
- [ 0.014862] twl4030: gpio (irq 368) chaining IRQs 384..401
- [ 0.018829] regulator: VUSB1V5: 1500 mV normal standby
- [ 0.019226] regulator: VUSB1V8: 1800 mV normal standby
- [ 0.019714] regulator: VUSB3V1: 3100 mV normal standby
- [ 0.024139] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
- [ 0.024841] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- [ 0.025299] regulator: VDAC: 1800 mV normal standby
- [ 0.025726] regulator: VPLL2: 1800 mV normal standby
- [ 0.026245] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
- [ 0.026519] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
- [ 0.026794] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
- [ 0.027954] Advanced Linux Sound Architecture Driver Version 1.0.23.
- [ 0.028625] NetLabel: Initializing
- [ 0.028656] NetLabel: domain hash size = 128
- [ 0.028717] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.028839] NetLabel: unlabeled traffic allowed by default
- [ 0.028900] Switching to clocksource 32k_counter
- [ 0.055999] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- [ 0.056579] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- [ 0.057037] NET: Registered protocol family 2
- [ 0.057403] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.058593] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.058868] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.059051] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.059112] TCP reno registered
- [ 0.059143] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.059234] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.059570] NET: Registered protocol family 1
- [ 0.060150] RPC: Registered udp transport module.
- [ 0.060211] RPC: Registered tcp transport module.
- [ 0.060241] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.061614] PMU: registered new PMU device of type 0
- [ 0.061767] dspbridge_init: 600000 bytes @ 81800000
- [ 0.062438] audit: initializing netlink socket (disabled)
- [ 0.062591] type=2000 audit(0.250:1): initialized
- [ 0.242675] VFS: Disk quotas dquot_6.5.2
- [ 0.243164] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.249816] fuse init (API version 7.14)
- [ 0.252075] Btrfs loaded
- [ 0.252166] msgmni has been set to 450
- [ 0.254913] alg: No test for stdrng (krng)
- [ 0.255493] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- [ 0.255584] io scheduler noop registered
- [ 0.255615] io scheduler deadline registered
- [ 0.255798] io scheduler cfq registered (default)
- [ 0.319030] OMAP DSS rev 2.0
- [ 0.319152] OMAP DISPC rev 3.0
- [ 0.319244] OMAP VENC rev 2
- [ 0.649536] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.672058] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
- [ 0.693664] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
- [ 0.715209] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
- [ 1.407501] console [ttyS2] enabled
- [ 1.420227] brd: module loaded
- [ 1.427764] loop: module loaded
- [ 1.434204] omap2-nand driver initializing
- [ 1.438781] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
- [ 1.447570] Creating 5 MTD partitions on "omap2-nand.0":
- [ 1.453002] 0x000000000000-0x000000080000 : "X-Loader"
- [ 1.460174] 0x000000080000-0x000000260000 : "U-Boot"
- [ 1.467498] 0x000000260000-0x000000280000 : "U-Boot Env"
- [ 1.474212] 0x000000280000-0x000000680000 : "Kernel"
- [ 1.482452] 0x000000680000-0x000010000000 : "File System"
- [ 1.598266] OneNAND driver initializing
- [ 1.602783] usbcore: registered new interface driver cdc_ether
- [ 1.608856] usbcore: registered new interface driver rndis_host
- [ 1.615600] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.622528] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
- [ 1.628662] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
- [ 1.636413] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
- [ 1.654632] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
- [ 1.661437] hub 1-0:1.0: USB hub found
- [ 1.665313] hub 1-0:1.0: 3 ports detected
- [ 1.694000] Initializing USB Mass Storage driver...
- [ 1.699096] usbcore: registered new interface driver usb-storage
- [ 1.705230] USB Mass Storage support registered.
- [ 1.709991] g_ether gadget: using random self ethernet address
- [ 1.715911] g_ether gadget: using random host ethernet address
- [ 1.723144] usb0: MAC 7e:7f:e5:36:76:2e
- [ 1.727111] usb0: HOST MAC ba:a6:88:db:38:a6
- [ 1.731475] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
- [ 1.738220] g_ether gadget: g_ether ready
- [ 1.742340] musb_hdrc musb_hdrc: MUSB HDRC host driver
- [ 1.747924] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 2
- [ 1.756256] hub 2-0:1.0: USB hub found
- [ 1.760070] hub 2-0:1.0: 1 port detected
- [ 1.764892] mice: PS/2 mouse device common for all mice
- [ 1.771240] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0
- [ 1.782379] i2c /dev entries driver
- [ 1.787445] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- [ 1.794555] device-mapper: uevent: version 1.0.3
- [ 1.800628] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- [ 1.809753] device-mapper: multipath: version 1.1.1 loaded
- [ 1.815399] device-mapper: multipath round-robin: version 1.0.0 loaded
- [ 1.823242] sdhci: Secure Digital Host Controller Interface driver
- [ 1.829559] sdhci: Copyright(c) Pierre Ossman
- [ 1.836425] mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
- [ 1.846527] No device for DAI tlv320aic23
- [ 1.927581] No device for DAI omap-mcbsp-dai-0
- [ 1.932159] No device for DAI omap-mcbsp-dai-1
- [ 1.936706] No device for DAI omap-mcbsp-dai-2
- [ 1.941192] No device for DAI omap-mcbsp-dai-3
- [ 1.945739] No device for DAI omap-mcbsp-dai-4
- [ 1.950225] No device for DAI omap-mcpdm
- [ 1.954223] Not OMAP3 EVM!
- [ 1.956970] Not OMAP3517 / AM3517 EVM!
- [ 1.960815] OMAP3 Beagle/Devkit8000 SoC init
- [ 1.966979] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
- [ 1.976806] ALSA device list:
- [ 1.979827] #0: omap3beagle (twl4030)
- [ 1.985687] TCP cubic registered
- [ 1.990386] NET: Registered protocol family 10
- [ 1.997100] lo: Disabled Privacy Extensions
- [ 2.003936] NET: Registered protocol family 17
- [ 2.008789] ThumbEE CPU extension supported.
- [ 2.015594] Power Management for TI OMAP3.
- [ 2.030944] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
- [ 2.039794] registered taskstats version 1
- [ 2.058624] Console: switching to colour frame buffer device 80x25
- [ 2.077606] regulator_init_complete: incomplete constraints, leaving VDAC on
- [ 2.088226] md: Waiting for all devices to be available before autodetect
- [ 2.098327] md: If you don't use raid, use raid=noautodetect
- [ 2.108306] md: Autodetecting RAID arrays.
- [ 2.115814] md: Scanned 0 and added 0 devices.
- [ 2.123626] md: autorun ...
- [ 2.129608] md: ... autorun DONE.
- [ 2.136474] Waiting for root device /dev/mmcblk0p2...
- [ 2.144958] usb 1-2: new high speed USB device using ehci-omap and address 2
- [ 2.260162] g_ether gadget: high speed config #1: CDC Ethernet (EEM)
- [ 2.308074] mmc0: new SDHC card at address dc0a
- [ 2.317016] mmcblk0: mmc0:dc0a SD04G 3.69 GiB
- [ 2.325775] mmcblk0:
- [ 2.329467] hub 1-2:1.0: USB hub found
- [ 2.340576] p1 p2
- [ 2.347137] hub 1-2:1.0: 4 ports detected
- [ 2.362304] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
- [ 2.382049] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
- [ 2.406585] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- [ 2.421142] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- [ 2.639251] usb 1-2.2: new full speed USB device using ehci-omap and address 3
- [ 2.775268] hub 1-2.2:1.0: USB hub found
- [ 2.785797] hub 1-2.2:1.0: 3 ports detected
- [ 2.881530] usb 1-2.3: new low speed USB device using ehci-omap and address 4
- [ 2.946899] EXT4-fs (mmcblk0p2): recovery complete
- [ 2.959289] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.975433] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 3.042327] devtmpfs: mounted
- [ 3.049682] Freeing init memory: 264K
- [ 3.115753] usb 1-2.2.1: new full speed USB device using ehci-omap and address 5
- [ 3.334136] usb 1-2.2.2: new full speed USB device using ehci-omap and address 6
- [ 3.553253] usb 1-2.2.3: new full speed USB device using ehci-omap and address 7
- Ubuntu 10.10 omap ttyS2
- omap login:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement