acceleration = 0
bed_size = 160,160
bed_temperature = 120
bridge_fan_speed = 80
bridge_flow_ratio = 1.4
bridge_speed = 30
brim_width = 0
complete_objects = 0
cooling = 1
disable_fan_first_layers = 0
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 1
fan_below_layer_time = 60
filament_diameter = 3.1
fill_angle = 45
fill_density = 0.4
fill_pattern = rectilinear
first_layer_bed_temperature = 120
first_layer_extrusion_width = 0
first_layer_height = 100%
first_layer_speed = 30%
first_layer_temperature = 260
g0 = 0
gcode_arcs = 0
gcode_comments = 1
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_extrusion_width = 0
infill_speed = 30
layer_gcode =
layer_height = 0.2
max_fan_speed = 60
min_fan_speed = 40
min_print_speed = 10
notes =
nozzle_diameter = 0.35
output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_speed = 40
perimeters = 3
perimeters_extrusion_width = 0
post_process =
print_center = 80,80
randomize_start =
retract_before_travel = 2
retract_length = 0.5
retract_lift = 0
retract_restart_extra = 0
retract_speed = 5
rotate = 0
scale = 1
skirt_distance = 6
skirt_height = 1
skirts = 2
slowdown_below_layer_time = 15
small_perimeter_speed = 30
solid_fill_pattern = concentric
solid_infill_speed = 50
solid_layers = 3
start_gcode = M106 S255; send G92 Z*, * is measured offset before print\nG28 X Y ; home all-> X,Y axes
support_material = 1
support_material_angle = 45
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_threshold = 45
support_material_tool = 0
temperature = 252
threads = 2
top_solid_infill_speed = 30
travel_speed = 80
use_relative_e_distances = 0
z_offset = 0