Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Welcome to Debian GNU/Linux 10 (buster)!
- File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based fi.
- Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- Configuration file /lib/systemd/system/qrtr-ns.service is marked executable. Please remove executable permission bits. Proceeding anyway.
- /lib/systemd/system/dsi-display.service:3: Unknown lvalue 'after' in section 'Unit', ignoring
- [ 26.422983] random: systemd: uninitialized urandom read (16 bytes read)
- [ 26.433963] random: systemd: uninitialized urandom read (16 bytes read)
- [ OK ] Listening on Journal Audit Socket.
- [ 26.441702] random: systemd: uninitialized urandom read (16 bytes read)
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Set up automount Arbitrary…s File System Automount Point.
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ OK ] Reached target Paths.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Listening on Journal Soc[ 26.520816] EXT4-fs (sda1): re-mounted. Opts: data=ordered
- ket.
- Starting Remount Root and Kernel File Systems...
- Starting Set the console keyboard layout...
- Mounting POSIX Message Queue File System...
- [ OK ] Reached target Swap.
- Starting Load Kernel Modules...
- Starting Create list of re…odes for the current kernel...
- Starting Nameserver information manager...
- [ OK ] Reached target Slices.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on udev Kernel Socket.
- Starting udev Coldplug all Devices...
- Mounting Huge Pages File System...
- [ OK ] Listening on Syslog Socket.
- Starting Journal Service...
- Mounting Kernel Debug File System...
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Started Load Kernel Modules.
- [ OK ] Started Create list of req… nodes for the current kernel.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted Kernel Debug File System.
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- Starting Load/Save Random Seed...
- Starting Create System Users...
- [ OK ] Started Nameserver information manager.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Started Create System Users.
- [ OK ] Started Apply Kernel Variables.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Started Journal Service.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Create Static Device Nodes in /dev.
- Starting udev Kernel Device Manager...
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Set console font and keymap.
- Starting Helper to synchronize boot up for ifupdown...
- [ OK ] Started Helper to synchronize boot up for ifupdown.
- [ 26.997130] systemd-journald[1919]: Received request to flush runtime journal from PID 1
- Starting Raise network interfaces...
- [ OK ] Started Flush Journal to Persistent Storage.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Time Synchronization...
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Raise network interfaces.
- [ 27.308719] qcom_adsp_pil adsp-pil: adsp-pil supply cx not found, using dummy regulator
- [ 27.316796] qcom_adsp_pil adsp-pil: adsp-pil supply px not found, using dummy regulator
- [ OK ] Started Network Time Synchronization.
- [ 27.341297] NET: Registered protocol family 42
- [ OK ] Reached target System Initialization.
- [ 27.351242] remoteproc remoteproc0: adsp-pil is available
- [ 27.363436] remoteproc remoteproc0: powering up adsp-pil
- [ 27.370291] remoteproc remoteproc0: Booting fw image adsp.mdt, size 7196
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ 27.389046] remoteproc remoteproc1: 2080000.remoteproc is available
- [ 27.401607] remoteproc remoteproc1: powering up 2080000.remoteproc
- [ OK ] Listening on GPS (Global P…ioning[ 27.408019] remoteproc remoteproc1: Booting fw image mba.mbn, size 213888
- System) Daemon Sockets.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- [ OK ] Started OTG Mode Switch for Type-C.
- [ OK ] Started D-Bus System Message Bus.
- [ 27.473372] qcom-q6v5-pil 2080000.remoteproc: MBA booted, loading mpss
- Starting Disk Manager...
- [ OK ] Started QIPCRTR Name Service.
- Starting Login Service...
- Starting rng-tools.service...
- Starting Restore /etc/reso… the ppp link was shut down...
- [ 27.570616] remoteproc remoteproc0: remote processor adsp-pil is now up
- Starting Initialize hardware monitoring sensors...
- [ 27.583350] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@8 to group 2
- [ 27.589063] Bluetooth: Core ver 2.22
- [ 27.590302] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@8: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.598701] NET: Registered protocol family 31
- [ 27.610777] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@9 to group 3
- [ 27.617393] Bluetooth: HCI device and connection manager initialized
- [ 27.622617] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@9: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.631451] Bluetooth: HCI socket layer initialized
- [ 27.643903] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@10 to group 4
- [ 27.652987] Bluetooth: L2CAP socket layer initialized
- [ OK ] Started Hardware RNG Entropy Gatherer Daemon.[ 27.672290] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@10: Linked as a consumer to 1600000.arm,smm6
- [ 27.673548] Bluetooth: SCO socket layer initialized
- [ 27.697986] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@11 to group 5
- [ 27.706951] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@11: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.722000] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@12 to group 6
- [ 27.729346] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@12: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.744750] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@5 to group 7
- [ 27.753219] Bluetooth: HCI UART driver ver 2.3
- [ 27.757160] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@5: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.774287] Bluetooth: HCI UART protocol H4 registered
- [ 27.779643] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@6 to group 8
- [ 27.787504] Bluetooth: HCI UART protocol BCSP registered
- [ 27.792582] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@6: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.806328] Bluetooth: HCI UART protocol LL registered
- [ 27.816485] iommu: Adding device adsp-pil:smd-edge:fastrpc:cb@7 to group 9
- [ 27.823788] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 27.828941] qcom,fastrpc-cb adsp-pil:smd-edge:fastrpc:cb@7: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 27.840715] Bluetooth: HCI UART protocol QCA registered
- [ 27.851198] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6core:4:3
- [ 27.868279] Bluetooth: hci0: ROME setup
- [ 27.873015] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6afe:4:4
- [ 27.880025] Bluetooth: hci0: Set UART speed to 3000000
- [ 27.902739] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6asm:4:7
- Starting LSB: Load kernel …d to enable cpufr[ 27.918080] qcom,apr remoteproc0:smd-edge.apr_audio_svc.-1.-1: Adding APR dev: aprsvc:q6adm:4:8
- [ 27.918888] media: Linux media interface: v0.10
- eq scaling...
- [ 27.954604] random: crng init done
- [ 27.958988] Linux video capture interface: v2.00
- [ 27.970427] random: 7 urandom warning(s) missed due to ratelimiting
- [ 27.971627] msm-snd-apq8096 sound: error getting cpu dai name
- [ OK ] Started Regular background program processing daemon.
- [ 28.002868] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.012638] iommu: Adding device c00000.video-codec to group 10
- [ 28.023578] qcom-venus c00000.video-codec: Linked as a consumer to d40000.arm,smmu-venus
- [ OK ] Started Daily Cleanup of Temporary Directories.
- Starting Reconfigure to make network manager work...
- [ 28.076452] i2c-qcom-cci a0c000.cci: Master 0 error 0x08000000
- [ 28.085577] i2c-qcom-cci a0c000.cci: master 0 queue 0 error -5
- [ OK ] Started DSI Display Service.
- [ 28.098116] i2c-qcom-cci a0c000.cci: cci i2c xfer error -5
- Starting Network Manager...
- [ 28.125283] ov5645 5-003c: ov5645_write_reg_to: write reg error -5 on addr 0x3c: reg=0x3100, val=0x78
- Starting WPA supplicant...
- [ OK ] Started Qualcomm remotefs service.
- [ 28.165130] ov5645 5-003c: could not change i2c address
- [ 28.175172] ov5645 5-003c: could not power up OV5645
- [ 28.186348] remoteproc remoteproc1: remote processor 2080000.remoteproc is now up
- [ 28.196411] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.203952] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.211741] Bluetooth: hci0: ROME controller version 0x00440302
- [ 28.216616] ov5645: probe of 5-003c failed with error -5
- [ 28.219118] Bluetooth: hci0: ROME Downloading qca/rampatch_00440302.bin
- [ 28.246465] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2
- [ 28.261194] Bluetooth: hci0: Failed to request file: qca/rampatch_00440302.bin (-2)
- [ 28.268638] Bluetooth: hci0: Failed to download patch (-2)
- Starting System Logging Service...
- Starting Modem Manager...
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Started Trigger anacron every hour.
- [ OK ] Started Run anacron jobs.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Started Daily rotation of log files.
- [ OK ] Reached target Timers.
- [ 28.481273] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.488838] iommu: Adding device a34000.camss to group 11
- [ 28.496390] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.498407] msm-snd-apq8096 sound: error getting cpu dai name
- [FAILED] Failed to start rng-tools.service.
- [ 28.514774] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.526840] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.528548] qcom-camss a34000.camss: Linked as a consumer to da0000.arm,smmu
- [ 28.542151] msm-snd-apq8096 sound: Error parsing OF data
- See 'systemctl status rng-tools.service' for details.
- [ 28.558238] qcom,slim-ngd-ctrl 91c0000.slim: SLIM SAT: Rcvd master capability
- [ 28.559522] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.570050] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 28.575431] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.583920] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 28.591577] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.612006] msm-snd-apq8096 sound: Error parsing OF data
- [ OK ] Started Restore /etc/resol…re the ppp link was shut down.
- [ 28.624050] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.636324] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.644950] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.652695] msm-snd-apq8096 sound: Error parsing OF data
- [ OK ] Started System Logging Service.
- [ 28.705253] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.713071] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.720209] msm-snd-apq8096 sound: Error parsing OF data
- [ OK ] Started Initialize hardware monitoring sensors.
- [ 28.743720] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.751058] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.771358] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.776571] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.783127] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.788041] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.800662] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.807170] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.816478] Mass Storage Function, version: 2009/09/11
- [ 28.817023] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.822714] LUN: removable file: (no medium)
- [ 28.830946] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.835211] LUN: removable file: /dev/sda2
- [ 28.841724] msm-snd-apq8096 sound: error getting cpu dai name
- [ 28.841816] qcom-camss a34000.camss: VFE HW Version = 0x70020000
- [ 28.848522] Number of LUNs=1
- [ 28.858598] msm-snd-apq8096 sound: Error parsing OF data
- [ OK ] Found device /dev/ttyMSM0.
- [ 28.872193] iommu: Adding device adsp-pil:smd-edge:apr:q6asm:dais to group 12
- [ 28.872314] q6asm-dai adsp-pil:smd-edge:apr:q6asm:dais: Linked as a consumer to 1600000.arm,smmu-lpass_q6
- [ 28.874553] g_mass_storage gadget: Mass Storage Gadget, version: 2009/09/11
- [ 28.874557] g_mass_storage gadget: userspace failed to provide iSerialNumber
- [ 28.874559] g_mass_storage gadget: g_mass_storage ready
- [ 28.878380] msm-snd-apq8096 sound: codec dai not found
- [ 28.878384] msm-snd-apq8096 sound: Error parsing OF data
- [ 28.926790] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
- [ 28.989513] ath10k_pci 0000:01:00.0: Direct firmware load for ath10k/cal-pci-0000:01:00.0.bin failed with error -2
- [ 28.993551] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
- [ 28.993556] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
- [ 28.994255] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
- [ 29.066440] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=1 from ath10k/QCA6174/hw3.0/board-2.bin
- [ 29.068005] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:1 crc32 ed5f849a
- [ OK ] Started LSB: Load kernel m…ded to enable cpufreq scaling.
- [ 29.449000] g_mass_storage gadget: high-speed config #1: Linux File-Backed Storage
- [ 29.568468] wcd9335-slim 217:1a0:0:0: setting slimbus l-addr:ca, ea:217,1a0,0,0
- [ 29.577716] msm-snd-apq8096 sound: codec dai not found
- [ 29.585283] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.634108] msm-snd-apq8096 sound: codec dai not found
- [ 29.638873] wcd9335-slim 217:1a0:1:0: WCD9335 CODEC version is v2.0
- [ 29.641599] msm-snd-apq8096 sound: Error parsing OF data
- [ 29.661711] wcd9335-slim 217:1a0:1:0: setting slimbus l-addr:cb, ea:217,1a0,1,0
- [ 29.672834] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
- [ 29.675353] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: no source widget found for Playback
- [ 29.683283] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
- [ 29.695453] hdmi-audio-codec hdmi-audio-codec.0.auto: ASoC: Failed to add route Playback -> direct -> TX
- [ 29.705546] ath10k_pci 0000:01:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 29.766903] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia1 mapping ok
- [ 29.774888] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia2 mapping ok
- [ 29.782747] msm-snd-apq8096 sound: snd-soc-dummy-dai <-> MultiMedia3 mapping ok
- [ 29.789754] msm-snd-apq8096 sound: i2s-hifi <-> HDMI mapping ok
- [ 29.796671] msm-snd-apq8096 sound: wcd9335_rx4 <-> SLIMBUS_6_RX mapping ok
- [ 29.803983] msm-snd-apq8096 sound: wcd9335_tx1 <-> SLIMBUS_0_TX mapping ok
- [ 29.812910] msm-snd-apq8096 sound: ASoC: no DMI vendor name!
- [ 29.840364] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
- [ 29.883835] input: DB820c Headset Jack as /devices/platform/sound/sound/card0/input4
- [ OK ] Started Network Manager.
- Starting Hostname Service...
- Starting Authorization Manager...
- [ OK ] Started Manage Sound Card State (restore and store).
- Starting Save/Restore Sound Card State...
- Starting Bluetooth service...
- [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
- Starting LSB: set CPUFreq kernel parameters...
- Stopping DSI Display Service...
- [ OK ] Stopped DSI Display Service.
- [ OK ] Started Authorization Manager.
- [ OK ] Started Bluetooth service.
- [ OK ] Started Hostname Service.
- [ 31.091206] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 31.098855] Bluetooth: BNEP filters: protocol multicast
- [ 31.106331] Bluetooth: BNEP socket layer initialized
- [ OK ] Started Modem Manager.
- Starting Network Manager Script Dispatcher Service...
- [ OK ] Reached target Bluetooth.
- Starting Load/Save RF Kill Switch Status...
- [ OK ] Started DSI Display Service.
- [ OK ] Started Load/Save RF Kill Switch Status.
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started WPA supplicant.
- [ OK ] Started Login Service.
- [ 31.333804] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
- [ OK ] Reached target Network.
- [ 31.362504] IPv6: ADDRCONF(NETDEV_UP): enP2p1s0: link is not ready
- Starting Permit User Sessions...
- Starting OpenBSD Secure Shell server...
- Starting /etc/rc.local Compatibility...
- [ 31.417906] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ OK ] Started Permit User Sessions.
- [ OK ] Started /etc/rc.local Compatibility.
- Starting Simple Desktop Display Manager...
- [ OK ] Started Getty on tty1.
- [ OK ] Created slice User Slice of UID 1000.
- Starting User Runtime Directory /run/user/1000...
- [ OK ] Started Serial Getty on ttyMSM0.
- [ OK ] Reached target Login Prompts.
- [ OK ] Started Simple Desktop Display Manager.
- [ OK ] Started Reconfigure to make network manager work.
- [ OK ] Started User Runtime Directory /run/user/1000.
- [ OK ] Started Disk Manager.
- Starting User Manager for UID 1000...
- [ OK ] Started Save/Restore Sound Card State.
- [ OK ] Reached target Sound Card.
- [ 31.833108] msm 900000.mdss: loaded qcom/a530_pm4.fw from legacy location
- [ 31.840892] msm 900000.mdss: loaded qcom/a530_pfp.fw from legacy location
- [ 31.848665] msm 900000.mdss: loaded qcom/a530v3_gpmu.fw2 from legacy location
- [ 31.857037] msm 900000.mdss: loaded qcom/a530_zap.mdt from legacy location
- [ OK ] Started User Manager for UID 1000.
- [ OK ] Started Session c2 of user linaro.
- [ OK ] Started Session c1 of user linaro.
- [ 32.174965] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
- [ 32.177928] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
- [ 32.202621] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ OK ] Started OpenBSD Secure Shell server.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Debian GNU/Linux 10 linaro-alip ttyMSM0
- linaro-alip login: root (automatic login)
- Last login: Thu Nov 28 13:25:30 UTC 2019 on ttyMSM0
- Linux linaro-alip 4.14.0-qcomlt-arm64 #1 SMP PREEMPT Wed Nov 13 19:06:12 IST 2019 aarch64
- The programs included with the Debian GNU/Linux system are free software;
- the exact distribution terms for each program are described in the
- individual files in /usr/share/doc/*/copyright.
- Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
- permitted by applicable law.
- root@linaro-alip:~# [ 33.048171] ath10k_pci 0000:01:00.0: Unknown eventid: 118809
- [ 33.051071] ath10k_pci 0000:01:00.0: Unknown eventid: 90118
- [ 33.076950] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ 33.209546] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
- [ 52.004416] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.004485] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.005145] wcd9335-codec wcd9335-codec.0: wcd9335_slimbus_irq: overflow error on TX port 0, value 1
- [ 52.012476] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.028510] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.033133] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.040390] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.053325] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.053383] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.060433] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.066320] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.073535] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.081057] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.100265] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.100333] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.108905] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.111967] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.120166] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.127049] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.149640] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.149780] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.155883] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.161858] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.168975] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.176490] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.196388] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.196458] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.208192] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.208242] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.228432] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.228482] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.267897] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.267968] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.276008] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.281773] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.286857] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.304189] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.314381] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.314446] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.322428] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.328017] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.333370] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.349467] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.357927] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.357992] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.366273] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.370858] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.378975] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.384526] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.426352] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.426420] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.432679] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.440045] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.445928] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.452842] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.472999] qcom-q6afe aprsvc:q6afe:4:4: cmd = 0x100e5 returned error = 0x9
- [ 52.473147] qcom-q6afe aprsvc:q6afe:4:4: DSP returned error[9]
- [ 52.478842] qcom-q6afe aprsvc:q6afe:4:4: AFE enable for port 0x4001 failed -22
- [ 52.484750] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: fail to start AFE port 3
- [ 52.493032] q6afe-dai adsp-pil:smd-edge:apr:q6afe:dais: ASoC: cpu DAI prepare error: -22
- [ 52.500669] SLIM Capture: ASoC: backend prepare failed -22
- [ 52.604740] Bluetooth: RFCOMM TTY layer initialized
- [ 52.604786] Bluetooth: RFCOMM socket layer initialized
- [ 52.609431] Bluetooth: RFCOMM ver 1.11
Add Comment
Please, Sign In to add comment