Linux version 2.6.34 (root@bt) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu12) ) #1 SMP Wed Jul 21 09:51:09 EDT 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000077ea0000 (usable)
 BIOS-e820: 0000000077ea0000 - 0000000077eb4000 (ACPI data)
 BIOS-e820: 0000000077eb4000 - 0000000077f00000 (ACPI NVS)
 BIOS-e820: 0000000077f00000 - 0000000078000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x77ea0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 040000000 mask FE0000000 write-back
  2 base 060000000 mask FF0000000 write-back
  3 base 070000000 mask FF8000000 write-back
  4 base 077F00000 mask FFFF00000 uncachable
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01000000
found SMP MP-table at [c00f76c0] f76c0
init_memory_mapping: 0000000000000000-00000000377fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037400000 page 2M
 0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 36bbb000 - 37ff0000
Allocated new RAMDISK: 00a8d000 - 01ec118a
Move RAMDISK from 0000000036bbb000 - 0000000037fef189 to 00a8d000 - 01ec1189
ACPI: RSDP 000f7750 00014 (v00 PTLTD )
ACPI: RSDT 77eaf147 00038 (v01 PTLTD    RSDT   06040000  LTP 00000000)
ACPI: FACP 77eb3ef6 00074 (v01 ATI    Goldfish 06040000 ATI  000F4240)
ACPI: DSDT 77eaf59c 0495A (v01 FIC    LM13W    06040000 MSFT 0100000E)
ACPI: FACS 77eb4fc0 00040
ACPI: APIC 77eb3f6a 0005A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
ACPI: MCFG 77eb3fc4 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
ACPI: SSDT 77eaf381 0021B (v01  PmRef  Cpu0Cst 00003001 INTL 20030224)
ACPI: SSDT 77eaf17f 00202 (v01  PmRef    CpuPm 00003000 INTL 20030224)
ACPI: Local APIC address 0xfee00000
1030MB HIGHMEM available.
887MB LOWMEM available.
  mapped low ram: 0 - 377fe000
  low ram: 0 - 377fe000
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x000377fe
  HighMem  0x000377fe -> 0x00077ea0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000001 -> 0x0000009f
    0: 0x00000100 -> 0x00077ea0
On node 0 totalpages: 491070
free_area_init_node: node 0, pgdat c0995040, node_mem_map c1ec3020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3966 pages, LIFO batch:0
  Normal zone: 1744 pages used for memmap
  Normal zone: 221486 pages, LIFO batch:31
  HighMem zone: 2062 pages used for memmap
  HighMem zone: 261780 pages, LIFO batch:31
Using APIC driver default
SB4X0 revision 0x11
Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
early_res array is doubled to 64 at [8000 - 87ff]
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 78000000 (gap: 78000000:86c00000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c3000000 s28372 r0 d20780 u4194304
pcpu-alloc: s28372 r0 d20780 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 487232
Kernel command line: root=UUID=72178908-3214-4191-b5ef-783297c15677 ro quiet vga=0x317
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (46 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0000100000 - 0000a87444]   TEXT DATA BSS
  #3 [0000a88000 - 0000a8c108]             BRK
  #4 [00000f76d0 - 0000100000]   BIOS reserved
  #5 [00000f76c0 - 00000f76d0]    MP-table mpf
  #6 [000009f800 - 000009fd70]   BIOS reserved
  #7 [000009fef8 - 00000f76c0]   BIOS reserved
  #8 [000009fd70 - 000009fef8]    MP-table mpc
  #9 [0000002000 - 0000003000]      TRAMPOLINE
  #10 [0000003000 - 0000007000]     ACPI WAKEUP
  #11 [0000007000 - 0000008000]         PGTABLE
  #12 [0000a8d000 - 0001ec2000]     NEW RAMDISK
  #13 [0001ec2000 - 0001ec3000]         BOOTMEM
  #14 [0001ec3000 - 0002dc3000]         BOOTMEM
  #15 [0002dc3000 - 0002dc3004]         BOOTMEM
  #16 [0002dc3040 - 0002dc3100]         BOOTMEM
  #17 [0002dc3100 - 0002dc3154]         BOOTMEM
  #18 [0002dc3180 - 0002dc6180]         BOOTMEM
  #19 [0002dc6180 - 0002dc61e4]         BOOTMEM
  #20 [0002dc6200 - 0002dcc200]         BOOTMEM
  #21 [0002dcc200 - 0002dcc227]         BOOTMEM
  #22 [0002dcc240 - 0002dcc374]         BOOTMEM
  #23 [0002dcc380 - 0002dcc3c0]         BOOTMEM
  #24 [0002dcc3c0 - 0002dcc400]         BOOTMEM
  #25 [0002dcc400 - 0002dcc440]         BOOTMEM
  #26 [0002dcc440 - 0002dcc480]         BOOTMEM
  #27 [0002dcc480 - 0002dcc4c0]         BOOTMEM
  #28 [0002dcc4c0 - 0002dcc500]         BOOTMEM
  #29 [0002dcc500 - 0002dcc540]         BOOTMEM
  #30 [0002dcc540 - 0002dcc580]         BOOTMEM
  #31 [0002dcc580 - 0002dcc5c0]         BOOTMEM
  #32 [0002dcc5c0 - 0002dcc600]         BOOTMEM
  #33 [0002dcc600 - 0002dcc610]         BOOTMEM
  #34 [0002dcc640 - 0002dcc683]         BOOTMEM
  #35 [0002dcc6c0 - 0002dcc703]         BOOTMEM
  #36 [0003000000 - 000300c000]         BOOTMEM
  #37 [0002dce740 - 0002dce744]         BOOTMEM
  #38 [0002dce780 - 0002dce784]         BOOTMEM
  #39 [0002dce7c0 - 0002dce7c4]         BOOTMEM
  #40 [0002dce800 - 0002dce804]         BOOTMEM
  #41 [0002dce840 - 0002dce8f0]         BOOTMEM
  #42 [0002dce900 - 0002dce9a8]         BOOTMEM
  #43 [0002dce9c0 - 0002dd29c0]         BOOTMEM
  #44 [0002dd29c0 - 0002e529c0]         BOOTMEM
  #45 [0002e529c0 - 0002e929c0]         BOOTMEM
Initializing HighMem for node 0 (000377fe:00077ea0)
Memory: 1917540k/1964672k available (6554k kernel code, 46740k reserved, 2260k data, 484k init, 1055368k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff1f000 - 0xfffff000   ( 896 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc099c000 - 0xc0a15000   ( 484 kB)
      .data : 0xc0766a10 - 0xc099bd44   (2260 kB)
      .text : 0xc0100000 - 0xc0766a10   (6554 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1610.299 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3221.78 BogoMIPS (lpj=5367663)
Security Framework initialized
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Performance Events: p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 28k freed
ACPI: Core revision 20100121
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) M processor         1.60GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3221.78 BogoMIPS).
xor: automatically using best checksumming function: pIII_sse
   pIII_sse  :  4299.600 MB/sec
xor: using function: pIII_sse (4299.600 MB/sec)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfd8ad, last bus=8
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-07] at [mem 0xe0000000-0xe07fffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe07fffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PFN1] (off)
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x78000000-0xfebfffff] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci 0000:00:13.0: reg 10: [mem 0xc0000000-0xc0000fff]
pci 0000:00:13.1: reg 10: [mem 0xc0001000-0xc0001fff]
pci 0000:00:13.2: reg 10: [mem 0xc0002000-0xc0002fff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
pci 0000:00:14.0: reg 10: [io  0x8420-0x842f]
pci 0000:00:14.0: reg 14: [mem 0xc0003000-0xc00033ff]
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:14.1: reg 10: [io  0x8450-0x8457]
pci 0000:00:14.1: reg 14: [io  0x8444-0x8447]
pci 0000:00:14.1: reg 18: [io  0x8448-0x844f]
pci 0000:00:14.1: reg 1c: [io  0x8440-0x8443]
pci 0000:00:14.1: reg 20: [io  0x8430-0x843f]
pci 0000:00:14.5: reg 10: [mem 0xc0003400-0xc00034ff]
pci 0000:00:14.6: reg 10: [mem 0xc0003800-0xc00038ff]
pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 14: [io  0x9000-0x90ff]
pci 0000:01:05.0: reg 18: [mem 0xc0100000-0xc010ffff]
pci 0000:01:05.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:02:01.0: reg 10: [mem 0xc0204000-0xc0205fff]
pci 0000:02:0b.0: reg 10: [mem 0xc020a000-0xc020afff]
pci 0000:02:0b.0: supports D1 D2
pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0b.0: PME# disabled
pci 0000:02:0b.2: reg 10: [mem 0xc020b000-0xc020b7ff]
pci 0000:02:0b.2: reg 14: [mem 0xc0200000-0xc0203fff]
pci 0000:02:0b.2: supports D1 D2
pci 0000:02:0b.2: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.2: PME# disabled
pci 0000:02:0b.3: reg 10: [mem 0xc0206000-0xc0207fff]
pci 0000:02:0b.3: supports D1 D2
pci 0000:02:0b.3: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.3: PME# disabled
pci 0000:02:0b.4: reg 10: [mem 0xc020c000-0xc020c0ff]
pci 0000:02:0b.4: reg 14: [mem 0xc020bc00-0xc020bcff]
pci 0000:02:0b.4: reg 18: [mem 0xc020b800-0xc020b8ff]
pci 0000:02:0b.4: supports D1 D2
pci 0000:02:0b.4: PME# supported from D0 D1 D2 D3hot
pci 0000:02:0b.4: PME# disabled
pci 0000:02:0d.0: reg 10: [mem 0xc0208000-0xc0209fff]
pci 0000:02:0d.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:0d.0: supports D1 D2
pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:0d.0: PME# disabled
pci 0000:00:14.4: PCI bridge to [bus 02-08] (subtractive decode)
pci 0000:00:14.4:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:14.4:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:14.4:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:14.4:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
raid6: int32x1    541 MB/s
raid6: int32x2    622 MB/s
raid6: int32x4    517 MB/s
raid6: int32x8    432 MB/s
raid6: mmxx1     1653 MB/s
raid6: mmxx2     1898 MB/s
raid6: sse1x1    1180 MB/s
raid6: sse1x2    1939 MB/s
raid6: sse2x1    2132 MB/s
raid6: sse2x2    2415 MB/s
raid6: using algorithm sse2x2 (2415 MB/s)
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 0000000077ea0000 - 0000000077ffffff
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: disabling [mem 0x00000000-0x00000fff] because it overlaps 0000:01:05.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp 00:09: disabling [mem 0x00000000-0x00000fff disabled] because it overlaps 0000:02:0d.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:08: [io  0x1080] has been reserved
system 00:08: [io  0x0220-0x022f] has been reserved
system 00:08: [io  0x040b] has been reserved
system 00:08: [io  0x04d0-0x04d1] has been reserved
system 00:08: [io  0x04d6] has been reserved
system 00:08: [io  0x0530-0x0537] has been reserved
system 00:08: [io  0x0c00-0x0c01] has been reserved
system 00:08: [io  0x0c14] has been reserved
system 00:08: [io  0x0c50-0x0c52] has been reserved
system 00:08: [io  0x0c6c] has been reserved
system 00:08: [io  0x0c6f] has been reserved
system 00:08: [io  0x0cd4-0x0cd5] has been reserved
system 00:08: [io  0x0cd6-0x0cd7] has been reserved
system 00:08: [io  0x0cd8-0x0cdf] has been reserved
system 00:08: [io  0x8000-0x805f] has been reserved
system 00:08: [io  0x8100-0x81ff window] has been reserved
system 00:08: [io  0x0f40-0x0f47] has been reserved
system 00:08: [io  0x0280-0x0293] has been reserved
system 00:08: [io  0x087f] has been reserved
system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:09: [mem 0xfff80000-0xffffffff] has been reserved
pci 0000:00:14.4: BAR 9: assigned [mem 0x78000000-0x7dffffff pref]
pci 0000:00:14.4: BAR 7: assigned [io  0x2000-0x2fff]
pci 0000:01:05.0: BAR 6: assigned [mem 0xc0120000-0xc013ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0x9000-0x9fff]
pci 0000:00:01.0:   bridge window [mem 0xc0100000-0xc01fffff]
pci 0000:00:01.0:   bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:02:0b.0: BAR 9: assigned [mem 0x78000000-0x7bffffff pref]
pci 0000:02:0b.0: BAR 10: assigned [mem 0x80000000-0x83ffffff]
pci 0000:02:0d.0: BAR 6: assigned [mem 0x7c000000-0x7c01ffff pref]
pci 0000:02:0b.0: BAR 7: assigned [io  0x2000-0x20ff]
pci 0000:02:0b.0: BAR 8: assigned [io  0x2400-0x24ff]
pci 0000:02:0b.0: CardBus bridge to [bus 03-06]
pci 0000:02:0b.0:   bridge window [io  0x2000-0x20ff]
pci 0000:02:0b.0:   bridge window [io  0x2400-0x24ff]
pci 0000:02:0b.0:   bridge window [mem 0x78000000-0x7bffffff pref]
pci 0000:02:0b.0:   bridge window [mem 0x80000000-0x83ffffff]
pci 0000:00:14.4: PCI bridge to [bus 02-08]
pci 0000:00:14.4:   bridge window [io  0x2000-0x2fff]
pci 0000:00:14.4:   bridge window [mem 0xc0200000-0xc02fffff]
pci 0000:00:14.4:   bridge window [mem 0x78000000-0x7dffffff pref]
pci 0000:02:0b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x9000-0x9fff]
pci_bus 0000:01: resource 1 [mem 0xc0100000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc0200000-0xc02fffff]
pci_bus 0000:02: resource 2 [mem 0x78000000-0x7dffffff pref]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
pci_bus 0000:03: resource 0 [io  0x2000-0x20ff]
pci_bus 0000:03: resource 1 [io  0x2400-0x24ff]
pci_bus 0000:03: resource 2 [mem 0x78000000-0x7bffffff pref]
pci_bus 0000:03: resource 3 [mem 0x80000000-0x83ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:01:05.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20692k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/O].
msgmni has been set to 1724
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 6144k, total 131072k
vesafb: mode is 1024x768x16, linelength=2048, pages=84
vesafb: protected mode interface info at c000:53c5
vesafb: pmi: set display start = c00c5433, set palette = c00c546d
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...
 silentjpeg size 128150 bytes,
...found (1024x768, 128042 bytes, v3).
Console: switching to colour frame buffer device 107x34
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /class/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /class/input/input2
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
Marking TSC unstable due to TSC halts in idle
Switching to clocksource acpi_pm
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (60 C)
isapnp: Scanning for PnP cards...
ACPI: Battery Slot [BAT0] (battery present)
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:14.6: PCI INT B disabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
Uniform Multi-Platform E-IDE driver
atiixp 0000:00:14.1: IDE controller (0x1002:0x4376 rev 0x00)
pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0x8430-0x8437
    ide1: BM-DMA at 0x8438-0x843f
Probing IDE interface ide0...
hda: SAMSUNG HM160HC, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
Probing IDE interface ide1...
hdc: _NEC DVD+/-RW ND-6650A, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hda: max request size: 512KiB
hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 >
ide-cd driver 5.00
ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[24702]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options
QLogic Fibre Channel HBA Driver: 8.03.02-k2
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.10
Copyright(c) 2004-2009 Emulex.  All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
       with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.17.1-rc1 Thu. Oct. 29, 11:41:51 PST 2009
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.013.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
RocketRAID 3xxx/4xxx Controller driver v1.6 (090910)
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI
Copyright (c) 1999-2006 Intel Corporation.
Atheros(R) L2 Ethernet Driver - version 2.2.3
Copyright (c) 2007 Atheros Corporation.
jme: JMicron JMC2XX ethernet driver version 1.0.6
pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
b44 0000:02:0d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ssb: Core 0 found: Fast Ethernet (cc 0x806, rev 0x07, vendor 0x4243)
ssb: Core 1 found: V90 (cc 0x807, rev 0x03, vendor 0x4243)
ssb: Core 2 found: PCI (cc 0x804, rev 0x0A, vendor 0x4243)
ssb: Sonics Silicon Backplane found on PCI device 0000:02:0d.0
b44: b44.c:v2.0
b44 ssb0:0: eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:40:ca:d5:ab:85
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.14
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.14
Fusion MPT FC Host driver 3.04.14
Fusion MPT SAS Host driver 3.04.14
ohci1394 0000:02:0b.2: PCI INT C -> GSI 23 (level, low) -> IRQ 23
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]  MMIO=[c020b000-c020b7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Freeing unused kernel memory: 484k freed
input: AT Translated Set 2 keyboard as /class/input/input3
fuse init (API version 7.13)
usb 1-2: new high speed USB device using ehci_hcd and address 2
scsi2 : usb-storage 1-2:1.0
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0040ca0133702a0e]
scsi 2:0:0:0: Direct-Access     USBDisk  RunDisk          1.00 PQ: 0 ANSI: 2
sd 2:0:0:0: [sda] 2002000 512-byte logical blocks: (1.02 GB/977 MiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 2:0:0:0: [sda] Assuming drive cache: write through
sd 2:0:0:0: [sda] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
PM: Starting manual resume from disk
EXT3-fs (hda5): recovery required on readonly filesystem
EXT3-fs (hda5): write access will be enabled during recovery
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hda5): recovery complete
EXT3-fs (hda5): mounted filesystem with writeback data mode
udevd version 124 started
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Linux agpgart interface v0.103
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8420, revision 0
tifm_7xx1 0000:02:0b.3: PCI INT B -> GSI 22 (level, low) -> IRQ 22
yenta_cardbus 0000:02:0b.0: CardBus bridge found [1734:1098]
yenta_cardbus 0000:02:0b.0: Enabling burst memory read transactions
yenta_cardbus 0000:02:0b.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:02:0b.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:02:0b.0: TI: mfunc 0x01ac1b22, devctl 0x66
input: PS/2 Mouse as /class/input/input4
input: AlpsPS/2 ALPS GlidePoint as /class/input/input5
yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x0ef8, PCI irq 20
yenta_cardbus 0000:02:0b.0: Socket status: 30000006
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [io  0x2000-0x2fff]
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: excluding 0x2000-0x20ff 0x2400-0x24ff
cfg80211: Calling CRDA to update world regulatory domain
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman

yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [mem 0xc0200000-0xc02fffff]
pcmcia_socket pcmcia_socket0: cs: memory probe 0xc0200000-0xc02fffff: excluding 0xc0200000-0xc020ffff
yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge window: [mem 0x78000000-0x7dffffff pref]
pcmcia_socket pcmcia_socket0: cs: memory probe 0x78000000-0x7dffffff: excluding 0x78000000-0x7dffffff
sdhci-pci 0000:02:0b.4: SDHCI controller found [104c:8034] (rev 0)
sdhci-pci 0000:02:0b.4: PCI INT B -> GSI 22 (level, low) -> IRQ 22
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:0b.4] using PIO
Registered led device: mmc1::
mmc1: SDHCI controller on PCI [0000:02:0b.4] using PIO
Registered led device: mmc2::
mmc2: SDHCI controller on PCI [0000:02:0b.4] using PIO
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
rt2500pci 0000:02:01.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
phy0: Selected rate control algorithm 'minstrel'
Registered led device: rt2500pci-phy0::radio
Registered led device: rt2500pci-phy0::quality
lp: driver loaded but no devices found
Adding 1004024k swap on /dev/hda6.  Priority:-1 extents:1 across:1004024k
EXT3-fs (hda5): using internal journal
ip_tables: (C) 2000-2006 Netfilter Core Team
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to userspace modesetting.
[drm] Initialized radeon 1.33.0 20080528 for 0000:01:05.0 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
b44 ssb0:0: eth0: Flow control is off for TX and off for RX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
device eth0 entered promiscuous mode