SHARE
TWEET

Raspberry Pi 4 Boot Log

cnxsoft Jun 24th, 2019 750 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. pi@raspberrypi:~ $ dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 4.19.46-v7l+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #866 SMP Fri Jun 7 18:00:39 BST 2019
  4. [    0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d
  5. [    0.000000] CPU: div instructions available: patching division code
  6. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  7. [    0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.1
  8. [    0.000000] Memory policy: Data cache writealloc
  9. [    0.000000] cma: Reserved 256 MiB at 0x000000001ec00000
  10. [    0.000000] On node 0 totalpages: 242688
  11. [    0.000000]   DMA zone: 1728 pages used for memmap
  12. [    0.000000]   DMA zone: 0 pages reserved
  13. [    0.000000]   DMA zone: 196608 pages, LIFO batch:63
  14. [    0.000000]   HighMem zone: 46080 pages, LIFO batch:15
  15. [    0.000000] random: get_random_bytes called from start_kernel+0xc0/0x4e8 with crng_init=0
  16. [    0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632
  17. [    0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096
  18. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  19. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 240960
  20. [    0.000000] Kernel command line: 8250.nr_uarts=0 cma=64M cma=256M video=HDMI-A-1:1920x1080@60 smsc95xx.macaddr=DC:A6:32:00:9E:9C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
  21. [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  22. [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. [    0.000000] Memory: 682480K/970752K available (8192K kernel code, 658K rwdata, 2344K rodata, 2048K init, 850K bss, 26128K reserved, 262144K cma-reserved, 184320K highmem)
  24. [    0.000000] Virtual kernel memory layout:
  25.                    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  26.                    fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
  27.                    vmalloc : 0xf0800000 - 0xff800000   ( 240 MB)
  28.                    lowmem  : 0xc0000000 - 0xf0000000   ( 768 MB)
  29.                    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  30.                    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  31.                      .text : 0x(ptrval) - 0x(ptrval)   (10208 kB)
  32.                      .init : 0x(ptrval) - 0x(ptrval)   (2048 kB)
  33.                      .data : 0x(ptrval) - 0x(ptrval)   ( 659 kB)
  34.                       .bss : 0x(ptrval) - 0x(ptrval)   ( 851 kB)
  35. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  36. [    0.000000] ftrace: allocating 28027 entries in 83 pages
  37. [    0.000000] rcu: Hierarchical RCU implementation.
  38. [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  39. [    0.000000] GIC: Using split EOI/Deactivate mode
  40. [    0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
  41. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
  42. [    0.000005] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
  43. [    0.000018] Switching to timer-based delay loop, resolution 18ns
  44. [    0.000242] Console: colour dummy device 80x30
  45. [    0.000266] console [tty1] enabled
  46. [    0.000307] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000)
  47. [    0.000329] pid_max: default: 32768 minimum: 301
  48. [    0.000592] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  49. [    0.000610] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  50. [    0.001366] CPU: Testing write buffer coherency: ok
  51. [    0.001773] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  52. [    0.002406] Setting up static identity map for 0x200000 - 0x20003c
  53. [    0.002561] rcu: Hierarchical SRCU implementation.
  54. [    0.003420] smp: Bringing up secondary CPUs ...
  55. [    0.004310] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  56. [    0.005324] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  57. [    0.006303] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  58. [    0.006436] smp: Brought up 1 node, 4 CPUs
  59. [    0.006449] SMP: Total of 4 processors activated (432.00 BogoMIPS).
  60. [    0.006458] CPU: All CPU(s) started in HYP mode.
  61. [    0.006466] CPU: Virtualization extensions available.
  62. [    0.007247] devtmpfs: initialized
  63. [    0.017225] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0
  64. [    0.017435] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  65. [    0.017456] futex hash table entries: 1024 (order: 4, 65536 bytes)
  66. [    0.024218] pinctrl core: initialized pinctrl subsystem
  67. [    0.025065] NET: Registered protocol family 16
  68. [    0.027628] DMA: preallocated 256 KiB pool for atomic coherent allocations
  69. [    0.029005] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  70. [    0.029015] hw-breakpoint: maximum watchpoint size is 8 bytes.
  71. [    0.029204] Serial: AMBA PL011 UART driver
  72. [    0.032307] bcm2835-mbox fe00b880.mailbox: mailbox enabled
  73. [    0.068037] bcm2835-dma fe007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
  74. [    0.070312] vgaarb: loaded
  75. [    0.070676] SCSI subsystem initialized
  76. [    0.070871] usbcore: registered new interface driver usbfs
  77. [    0.070922] usbcore: registered new interface driver hub
  78. [    0.071020] usbcore: registered new device driver usb
  79. [    0.090372] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-06-07 18:01, variant start
  80. [    0.100121] raspberrypi-firmware soc:firmware: Firmware hash is b5cfeb0a81046c23b73eb41dab3745fcf0601247
  81. [    0.111595] clocksource: Switched to clocksource arch_sys_counter
  82. [    0.188823] VFS: Disk quotas dquot_6.6.0
  83. [    0.188897] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  84. [    0.189046] FS-Cache: Loaded
  85. [    0.189224] CacheFiles: Loaded
  86. [    0.189781] simple-framebuffer 3e887000.framebuffer: framebuffer at 0x3e887000, 0x373800 bytes, mapped to 0x(ptrval)
  87. [    0.189797] simple-framebuffer 3e887000.framebuffer: format=r5g6b5, mode=1824x984x16, linelength=3648
  88. [    0.196411] Console: switching to colour frame buffer device 228x61
  89. [    0.202348] simple-framebuffer 3e887000.framebuffer: fb0: simplefb registered!
  90. [    0.211326] NET: Registered protocol family 2
  91. [    0.212009] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  92. [    0.212033] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  93. [    0.212099] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  94. [    0.212169] TCP: Hash tables configured (established 8192 bind 8192)
  95. [    0.212286] UDP hash table entries: 512 (order: 2, 16384 bytes)
  96. [    0.212315] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  97. [    0.212593] NET: Registered protocol family 1
  98. [    0.213140] RPC: Registered named UNIX socket transport module.
  99. [    0.213150] RPC: Registered udp transport module.
  100. [    0.213159] RPC: Registered tcp transport module.
  101. [    0.213169] RPC: Registered tcp NFSv4.1 backchannel transport module.
  102. [    0.213184] PCI: CLS 0 bytes, default 64
  103. [    0.216202] Initialise system trusted keyrings
  104. [    0.216383] workingset: timestamp_bits=14 max_order=18 bucket_order=4
  105. [    0.225116] FS-Cache: Netfs 'nfs' registered for caching
  106. [    0.225602] NFS: Registering the id_resolver key type
  107. [    0.225625] Key type id_resolver registered
  108. [    0.225635] Key type id_legacy registered
  109. [    0.225655] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  110. [    0.227823] Key type asymmetric registered
  111. [    0.227833] Asymmetric key parser 'x509' registered
  112. [    0.227942] bounce: pool size: 64 pages
  113. [    0.227984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  114. [    0.228140] io scheduler noop registered
  115. [    0.228150] io scheduler deadline registered (default)
  116. [    0.228292] io scheduler cfq registered
  117. [    0.228303] io scheduler mq-deadline registered (default)
  118. [    0.228313] io scheduler kyber registered
  119. [    0.231191] brcm-pcie fd500000.pcie: could not get clock
  120. [    0.231246] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
  121. [    0.231282] brcm-pcie fd500000.pcie:   MEM 0x600000000..0x603ffffff -> 0xf8000000
  122. [    0.291629] brcm-pcie fd500000.pcie: link up, 5.0 Gbps x1 (!SSC)
  123. [    0.291871] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
  124. [    0.291885] pci_bus 0000:00: root bus resource [bus 00-01]
  125. [    0.291901] pci_bus 0000:00: root bus resource [mem 0x600000000-0x603ffffff] (bus address [0xf8000000-0xfbffffff])
  126. [    0.291943] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
  127. [    0.292077] pci 0000:00:00.0: PME# supported from D0 D3hot
  128. [    0.294694] PCI: bus0: Fast back to back transfers disabled
  129. [    0.294711] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  130. [    0.294873] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330
  131. [    0.294932] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
  132. [    0.295100] pci 0000:01:00.0: PME# supported from D0 D3cold
  133. [    0.297642] PCI: bus1: Fast back to back transfers disabled
  134. [    0.297658] pci_bus 0000:01: busn_res: [bus 01] end is updated to 01
  135. [    0.297704] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
  136. [    0.297724] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit]
  137. [    0.297754] pci 0000:00:00.0: PCI bridge to [bus 01]
  138. [    0.297771] pci 0000:00:00.0:   bridge window [mem 0x600000000-0x6000fffff]
  139. [    0.297830] pci 0000:00:00.0: enabling device (0140 -> 0142)
  140. [    0.297852] pci 0000:01:00.0: enabling device (0140 -> 0142)
  141. [    0.300976] iproc-rng200 fe104000.rng: hwrng registered
  142. [    0.301190] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
  143. [    0.301711] vc-sm: Videocore shared memory driver
  144. [    0.302102] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
  145. [    0.312046] brd: module loaded
  146. [    0.321540] loop: module loaded
  147. [    0.322340] Loading iSCSI transport class v2.0-870.
  148. [    0.323945] libphy: Fixed MDIO Bus: probed
  149. [    0.324365] bcmgenet fd580000.genet: failed to get enet clock
  150. [    0.324381] bcmgenet fd580000.genet: GENET 5.0 EPHY: 0x0000
  151. [    0.324398] bcmgenet fd580000.genet: failed to get enet-wol clock
  152. [    0.324413] bcmgenet fd580000.genet: failed to get enet-eee clock
  153. [    0.324652] unimac-mdio unimac-mdio.-19: DMA mask not set
  154. [    0.341627] libphy: bcmgenet MII bus: probed
  155. [    0.382125] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus at 0x(ptrval)
  156. [    0.383006] usbcore: registered new interface driver r8152
  157. [    0.383064] usbcore: registered new interface driver lan78xx
  158. [    0.383116] usbcore: registered new interface driver smsc95xx
  159. [    0.383370] xhci_hcd 0000:01:00.0: xHCI Host Controller
  160. [    0.383399] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
  161. [    0.384715] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000000000000890
  162. [    0.384876] genirq: irq_chip Brcm_MSI did not update eff. affinity mask of irq 55
  163. [    0.385484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  164. [    0.385497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  165. [    0.385509] usb usb1: Product: xHCI Host Controller
  166. [    0.385520] usb usb1: Manufacturer: Linux 4.19.46-v7l+ xhci-hcd
  167. [    0.385531] usb usb1: SerialNumber: 0000:01:00.0
  168. [    0.386031] hub 1-0:1.0: USB hub found
  169. [    0.386090] hub 1-0:1.0: 1 port detected
  170. [    0.386493] xhci_hcd 0000:01:00.0: xHCI Host Controller
  171. [    0.386520] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
  172. [    0.386539] xhci_hcd 0000:01:00.0: Host supports USB 3.0  SuperSpeed
  173. [    0.386877] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19
  174. [    0.386890] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  175. [    0.386902] usb usb2: Product: xHCI Host Controller
  176. [    0.386913] usb usb2: Manufacturer: Linux 4.19.46-v7l+ xhci-hcd
  177. [    0.386924] usb usb2: SerialNumber: 0000:01:00.0
  178. [    0.387411] hub 2-0:1.0: USB hub found
  179. [    0.387464] hub 2-0:1.0: 4 ports detected
  180. [    0.388548] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  181. [    0.414113] dwc_otg fe980000.usb: base=(ptrval)
  182. [    0.614449] Core Release: 2.80a
  183. [    0.614462] Setting default values for core params
  184. [    0.614489] Finished setting default values for core params
  185. [    0.814807] Using Buffer DMA mode
  186. [    0.814817] Periodic Transfer Interrupt Enhancement - disabled
  187. [    0.814826] Multiprocessor Interrupt Enhancement - disabled
  188. [    0.814837] OTG VER PARAM: 0, OTG VER FLAG: 0
  189. [    0.814888] Dedicated Tx FIFOs mode
  190. [    0.815545] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = dec70000 dma = 0x00000000dec70000 len=9024
  191. [    0.815571] FIQ FSM acceleration enabled for :
  192.                Non-periodic Split Transactions
  193.                Periodic Split Transactions
  194.                High-Speed Isochronous Endpoints
  195.                Interrupt/Control Split Transaction hack enabled
  196. [    0.815583] dwc_otg: Microframe scheduler enabled
  197. [    0.815643] WARN::hcd_init_fiq:457: FIQ on core 1
  198. [    0.815660] WARN::hcd_init_fiq:458: FIQ ASM at c07ad858 length 36
  199. [    0.815677] WARN::hcd_init_fiq:497: MPHI regs_base at f0810200
  200. [    0.815716] dwc_otg fe980000.usb: DWC OTG Controller
  201. [    0.815745] dwc_otg fe980000.usb: new USB bus registered, assigned bus number 3
  202. [    0.815777] dwc_otg fe980000.usb: irq 36, io mem 0x00000000
  203. [    0.815829] Init: Port Power? op_state=1
  204. [    0.815838] Init: Power Port (0)
  205. [    0.816102] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  206. [    0.816116] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  207. [    0.816128] usb usb3: Product: DWC OTG Controller
  208. [    0.816139] usb usb3: Manufacturer: Linux 4.19.46-v7l+ dwc_otg_hcd
  209. [    0.816150] usb usb3: SerialNumber: fe980000.usb
  210. [    0.816653] hub 3-0:1.0: USB hub found
  211. [    0.816701] hub 3-0:1.0: 1 port detected
  212. [    0.817293] dwc_otg: FIQ enabled
  213. [    0.817302] dwc_otg: NAK holdoff enabled
  214. [    0.817311] dwc_otg: FIQ split-transaction FSM enabled
  215. [    0.817324] Module dwc_common_port init
  216. [    0.817537] usbcore: registered new interface driver uas
  217. [    0.817647] usbcore: registered new interface driver usb-storage
  218. [    0.817812] mousedev: PS/2 mouse device common for all mice
  219. [    0.818983] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
  220. [    0.819184] bcm2835-cpufreq: min=600000 max=1500000
  221. [    0.819779] sdhci: Secure Digital Host Controller Interface driver
  222. [    0.819788] sdhci: Copyright(c) Pierre Ossman
  223. [    0.820164] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe
  224. [    0.820530] sdhci-pltfm: SDHCI platform and OF driver helper
  225. [    0.823502] ledtrig-cpu: registered to indicate activity on CPUs
  226. [    0.823678] hidraw: raw HID events driver (C) Jiri Kosina
  227. [    0.823822] usbcore: registered new interface driver usbhid
  228. [    0.823832] usbhid: USB HID core driver
  229. [    0.824664] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
  230. [    0.826247] [vc_sm_connected_init]: start
  231. [    0.834499] [vc_sm_connected_init]: end - returning 0
  232. [    0.835406] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
  233. [    0.835420] [vc_sm_connected_init]: start
  234. [    0.835737] [vc_sm_connected_init]: installed successfully
  235. [    0.836041] Initializing XFRM netlink socket
  236. [    0.836067] NET: Registered protocol family 17
  237. [    0.836164] Key type dns_resolver registered
  238. [    0.836531] Registering SWP/SWPB emulation handler
  239. [    0.837115] registered taskstats version 1
  240. [    0.837130] Loading compiled-in X.509 certificates
  241. [    0.844826] uart-pl011 fe201000.serial: cts_event_workaround enabled
  242. [    0.844890] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 33, base_baud = 0) is a PL011 rev2
  243. [    0.847786] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
  244. [    0.848282] brcmstb_thermal fd5d2200.thermal: registered AVS TMON of-sensor driver
  245. [    0.848891] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
  246. [    0.848903] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
  247. [    0.874735] sdhci-iproc fe340000.emmc2: Linked as a consumer to regulator.1
  248. [    0.893746] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  249. [    0.895361] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  250. [    0.896976] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  251. [    0.899872] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  252. [    0.901483] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  253. [    0.907760] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using ADMA
  254. [    0.910112] of_cfs_init
  255. [    0.910202] of_cfs_init: OK
  256. [    0.910883] Waiting for root device /dev/mmcblk0p7...
  257. [    0.953609] random: fast init done
  258. [    0.961647] usb 1-1: new high-speed USB device number 2 using xhci_hcd
  259. [    0.992346] mmc1: new high speed SDIO card at address 0001
  260. [    1.009551] mmc0: new ultra high speed DDR50 SDHC card at address e624
  261. [    1.010657] mmcblk0: mmc0:e624 SL16G 14.8 GiB
  262. [    1.014360]  mmcblk0: p1 p2 < p5 p6 p7 >
  263. [    1.033181] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
  264. [    1.033222] VFS: Mounted root (ext4 filesystem) readonly on device 179:7.
  265. [    1.033899] devtmpfs: mounted
  266. [    1.040255] Freeing unused kernel memory: 2048K
  267. [    1.091848] Run /sbin/init as init process
  268. [    1.143241] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
  269. [    1.143255] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  270. [    1.143268] usb 1-1: Product: USB2.0 Hub
  271. [    1.144748] hub 1-1:1.0: USB hub found
  272. [    1.145000] hub 1-1:1.0: 4 ports detected
  273. [    1.291844] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
  274. [    1.323166] usb 2-1: New USB device found, idVendor=0bc2, idProduct=2312, bcdDevice= 6.36
  275. [    1.323180] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  276. [    1.323192] usb 2-1: Product: Expansion
  277. [    1.323204] usb 2-1: Manufacturer: Seagate
  278. [    1.323215] usb 2-1: SerialNumber: NA495NNC
  279. [    1.339926] scsi host0: uas
  280. [    1.341937] scsi 0:0:0:0: Direct-Access     Seagate  Expansion        0636 PQ: 0 ANSI: 6
  281. [    1.344578] sd 0:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/932 GiB)
  282. [    1.345001] sd 0:0:0:0: [sda] Write Protect is off
  283. [    1.345014] sd 0:0:0:0: [sda] Mode Sense: 2b 00 10 08
  284. [    1.345856] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
  285. [    1.350723]  sda: sda1 sda2 sda3 sda4
  286. [    1.354846] sd 0:0:0:0: [sda] Attached SCSI disk
  287. [    1.468139] systemd[1]: System time before build time, advancing clock.
  288. [    1.548163] NET: Registered protocol family 10
  289. [    1.549362] Segment Routing with IPv6
  290. [    1.577413] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  291. [    1.578075] systemd[1]: Detected architecture arm.
  292. [    1.586132] systemd[1]: Set hostname to <raspberrypi>.
  293. [    1.595591] random: systemd: uninitialized urandom read (16 bytes read)
  294. [    1.595639] systemd[1]: Initializing machine ID from random generator.
  295. [    1.595789] systemd[1]: Installed transient /etc/machine-id file.
  296. [    1.861352] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  297. [    1.861373] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  298. [    2.214424] random: systemd: uninitialized urandom read (16 bytes read)
  299. [    2.223235] random: systemd: uninitialized urandom read (16 bytes read)
  300. [    2.223696] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  301. [    2.224578] systemd[1]: Listening on Journal Socket.
  302. [    2.237587] systemd[1]: Starting Restore / save the current clock...
  303. [    2.362821] i2c /dev entries driver
  304. [    6.791653] usb 1-1.4: new low-speed USB device number 3 using xhci_hcd
  305. [    6.938506] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=0002, bcdDevice= 1.10
  306. [    6.938522] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  307. [    6.938534] usb 1-1.4: Product: USB Keykoard
  308. [    6.938546] usb 1-1.4: Manufacturer: USB
  309. [    6.962180] input: USB USB Keykoard as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:0002.0001/input/input0
  310. [    7.032183] hid-generic 0003:1A2C:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:01:00.0-1.4/input0
  311. [    7.037013] input: USB USB Keykoard Consumer Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:0002.0002/input/input1
  312. [    7.101923] input: USB USB Keykoard System Control as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:0002.0002/input/input2
  313. [    7.102112] hid-generic 0003:1A2C:0002.0002: input,hidraw1: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:01:00.0-1.4/input1
  314. [    7.346942] EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
  315. [    7.441686] systemd-journald[125]: Received request to flush runtime journal from PID 1
  316. [    8.125297] argon-mem feb00000.hevc-decoder: argon-hevcmem initialised: Registers at 0xfeb00000 length 0x0000ffff
  317. [    8.125638] argon-mem feb10000.argon-local-intc: argon-intcmem initialised: Registers at 0xfeb10000 length 0x00000fff
  318. [    8.125937] argon-mem feb20000.h264-decoder: argon-h264mem initialised: Registers at 0xfeb20000 length 0x0000ffff
  319. [    8.126244] argon-mem feb30000.vp9-decoder: argon-vp9mem initialised: Registers at 0xfeb30000 length 0x0000ffff
  320. [    8.170647] media: Linux media interface: v0.10
  321. [    8.201106] videodev: Linux video capture interface: v2.00
  322. [    8.244846] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  323. [    8.244925] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
  324. [    8.250390] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
  325. [    8.265450] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
  326. [    8.382625] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  327. [    8.487791] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  328. [    8.540691] brcmfmac: F1 signature read @0x18000000=0x15264345
  329. [    8.553243] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  330. [    8.555473] usbcore: registered new interface driver brcmfmac
  331. [    8.677627] sd 0:0:0:0: Attached scsi generic sg0 type 0
  332. [    8.744569] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
  333. [    8.769181] bcm2835_audio soc:audio: card created with 8 channels
  334. [    8.786549] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
  335. [    8.800108] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Feb 27 2018 03:15:32 version 7.45.154 (r684107 CY) FWID 01-4fbe0b04
  336. [    8.886352] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
  337. [    8.886368] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
  338. [    8.893161] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
  339. [    8.893174] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
  340. [    8.903298] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
  341. [    8.903312] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
  342. [    8.970649] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
  343. [    9.012090] vc4-drm soc:gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4])
  344. [    9.012109] checking generic (3e887000 373800) vs hw (0 ffffffffffffffff)
  345. [    9.012119] fb: switching to vc4drmfb from simple
  346. [    9.012351] Console: switching to colour dummy device 80x30
  347. [    9.035508] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 1
  348. [    9.035522] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  349. [    9.035531] [drm] No driver support for vblank timestamp query.
  350. [    9.035541] [drm] Setting vblank_disable_immediate to false because get_vblank_timestamp == NULL
  351. [    9.074696] Console: switching to colour frame buffer device 240x67
  352. [    9.074741] vc4-drm soc:gpu: fb0: DRM emulated frame buffer device
  353. [   10.561606] raid6: int32x1  gen()   193 MB/s
  354. [   10.731745] raid6: int32x1  xor()   175 MB/s
  355. [   10.901795] raid6: int32x2  gen()   246 MB/s
  356. [   11.071733] raid6: int32x2  xor()   199 MB/s
  357. [   11.241726] raid6: int32x4  gen()   301 MB/s
  358. [   11.275629] random: crng init done
  359. [   11.275640] random: 7 urandom warning(s) missed due to ratelimiting
  360. [   11.411722] raid6: int32x4  xor()   188 MB/s
  361. [   11.581687] raid6: int32x8  gen()   280 MB/s
  362. [   11.751645] raid6: int32x8  xor()   180 MB/s
  363. [   11.921635] raid6: neonx1   gen()   689 MB/s
  364. [   12.091593] raid6: neonx1   xor()   752 MB/s
  365. [   12.261639] raid6: neonx2   gen()   950 MB/s
  366. [   12.431603] raid6: neonx2   xor()   995 MB/s
  367. [   12.601606] raid6: neonx4   gen()  1265 MB/s
  368. [   12.771597] raid6: neonx4   xor()  1016 MB/s
  369. [   12.941645] raid6: neonx8   gen()  1116 MB/s
  370. [   13.111615] raid6: neonx8   xor()   951 MB/s
  371. [   13.111625] raid6: using algorithm neonx4 gen() 1265 MB/s
  372. [   13.111635] raid6: .... xor() 1016 MB/s, rmw enabled
  373. [   13.111645] raid6: using neon recovery algorithm
  374. [   13.198759] xor: measuring software checksum speed
  375. [   13.291616]    arm4regs  :  1653.200 MB/sec
  376. [   13.391613]    8regs     :  1083.200 MB/sec
  377. [   13.491610]    32regs    :   968.000 MB/sec
  378. [   13.591608]    neon      :  2206.000 MB/sec
  379. [   13.591621] xor: using function: neon (2206.000 MB/sec)
  380. [   13.723071] Btrfs loaded, crc32c=crc32c-generic
  381. [   13.726606] BTRFS: device label USB3_BTRFS devid 1 transid 452 /dev/sda4
  382. [   17.291647] usb 1-1.3: new low-speed USB device number 4 using xhci_hcd
  383. [   17.458472] usb 1-1.3: New USB device found, idVendor=0461, idProduct=4d15, bcdDevice= 2.00
  384. [   17.458496] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  385. [   17.458509] usb 1-1.3: Product: USB Optical Mouse
  386. [   17.469676] input: USB Optical Mouse as /devices/platform/scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.3/1-1.3:1.0/0003:0461:4D15.0003/input/input3
  387. [   17.471244] hid-generic 0003:0461:4D15.0003: input,hidraw2: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:01:00.0-1.3/input0
  388. [   19.207358] uart-pl011 fe201000.serial: no DMA platform data
  389. [   19.352564] EXT4-fs (mmcblk0p7): resizing filesystem from 1559414 to 3411328 blocks
  390. [   19.674001] EXT4-fs (mmcblk0p7): resized filesystem to 3411328
  391. [   20.524972] Adding 102396k swap on /var/swap.  Priority:-2 extents:1 across:102396k SSFS
  392. [   21.116202] 8021q: 802.1Q VLAN Support v1.8
  393. [   21.287519] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  394. [   21.287528] brcmfmac: power management disabled
  395. [   21.601863] bcmgenet fd580000.genet: configuring instance for external RGMII (no delay)
  396. [   21.602007] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  397. [   22.631693] bcmgenet fd580000.genet eth0: Link is Down
  398. [   25.353178] fuse init (API version 7.27)
  399. [   25.788535] Bluetooth: Core ver 2.22
  400. [   25.788570] NET: Registered protocol family 31
  401. [   25.788575] Bluetooth: HCI device and connection manager initialized
  402. [   25.788586] Bluetooth: HCI socket layer initialized
  403. [   25.788592] Bluetooth: L2CAP socket layer initialized
  404. [   25.788613] Bluetooth: SCO socket layer initialized
  405. [   25.807187] Bluetooth: HCI UART driver ver 2.3
  406. [   25.807196] Bluetooth: HCI UART protocol H4 registered
  407. [   25.807249] Bluetooth: HCI UART protocol Three-wire (H5) registered
  408. [   25.809094] Bluetooth: HCI UART protocol Broadcom registered
  409. [   26.129237] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  410. [   26.129243] Bluetooth: BNEP filters: protocol multicast
  411. [   26.129254] Bluetooth: BNEP socket layer initialized
  412. [   26.173472] Bluetooth: RFCOMM TTY layer initialized
  413. [   26.173486] Bluetooth: RFCOMM socket layer initialized
  414. [   26.173505] Bluetooth: RFCOMM ver 1.11
  415. [   27.373598] BTRFS info (device sda4): disk space caching is enabled
  416. [   28.239209] EXT4-fs (sda2): recovery complete
  417. [   28.239475] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  418. [   28.447329] ntfs: driver 2.1.32 [Flags: R/W MODULE].
  419. [   28.743642] ntfs: volume version 3.1.
  420. [   28.743651] ntfs: (device sda1): load_system_files(): Volume is dirty.  Mounting read-only.  Run chkdsk and mount in Windows.
  421. [   37.191963] bcmgenet fd580000.genet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  422. [   37.192006] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  423. [  173.327821] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top