Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- SVR = 0x80400012
- PVR = 0x80840010
- Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
- Linux version 2.4.20_mvl31-gponsoc (ccadm@aurfbz.aur.alcatel.com) (gcc version 3.3.1 (MontaVista 3.3.1-7.0.46.0702887 2007-03-30)) #1 Wed Mar 4 13:59:40 EST 2009
- On node 0 totalpages: 16384
- zone(0): 16384 pages.
- zone 0: pages_min: 1700, pages_max:1800
- zone(1): 0 pages.
- zone(2): 0 pages.
- Kernel command line: root=/dev/ram rw onsole=ttyS1,9600
- IPIC (128 IRQ sources, 8 External IRQs) at f0000700
- hr_time_init: arch_to_nsec = 62920852, nsec_to_arch = 143151259
- Calibrating delay loop... 177.35 BogoMIPS
- Memory: 56228k available (1232k kernel code, 396k data, 52k init, 0k highmem)
- Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
- Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
- Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
- Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
- POSIX conformance testing by UNIFIX
- Linux NET4.0 for Linux 2.4
- Based upon Swansea University Computer Society NET3.039
- Initializing RT netlink socket
- Initializing SIU Timer3 as watchdog service device.
- LSP Revision 109
- ikconfig 0.5 with /proc/ikconfig
- Starting kswapd
- Disabling the Out Of Memory Killer
- devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
- devfs: boot_options: 0x1
- JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
- i2c-core.o: i2c core module version 2.6.2 (20011118)
- i2c-dev.o: i2c /dev entries driver module version 2.6.2 (20011118)
- i2c-proc.o version 2.6.2 (20011118)
- pty: 256 Unix98 ptys configured
- Serial driver version 5.05c (2001-07-08) with no serial options enabled
- ttyS00 at 0xf0004500 (irq = 9) is a 16550A
- ttyS01 at 0xf0004600 (irq = 10) is a 16550A
- RAMDISK driver initialized: 16 RAM disks of 28672K size 1024 blocksize
- eth0: Gianfar Ethernet Controller Version 1.0 with msc7120 GPON00:07:72:65:84:66
- eth0: Running with NAPI disabled
- eth0: 64/64 RX/TX BD ring size
- eth1: Gianfar Ethernet Controller Version 1.0 with msc7120 GPON00:e0:0c:00:7d:01
- eth1: Running with NAPI disabled
- eth1: 64/64 RX/TX BD ring size
- I2C 8bit rw
- mpc-i2c0: scanning bus...
- mpc-i2c0: 0 device(s) detected
- physmap flash device: 2000000 at fe000000
- phys_mapped_flash: Found 1 x16 devices at 0x0 in 16-bit bank
- Intel/Sharp Extended Query Table at 0x010A
- Intel/Sharp Extended Query Table at 0x010A
- Intel/Sharp Extended Query Table at 0x010A
- Intel/Sharp Extended Query Table at 0x010A
- Intel/Sharp Extended Query Table at 0x010A
- Using buffer write method
- cfi_cmdset_0001: Erase suspend on write enabled
- kmod: failed to exec /sbin/modprobe -s -k cmdlinepart, errno = 2
- cmdlinepart partition parsing not available
- kmod: failed to exec /sbin/modprobe -s -k RedBoot, errno = 2
- RedBoot partition parsing not available
- Using physmap partition definition
- Creating 9 MTD partitions on "phys_mapped_flash":
- 0x00000000-0x00100000 : "U-Boot-low"
- 0x00100000-0x00d00000 : "SW-1"
- 0x00d00000-0x01900000 : "SW-2"
- 0x01900000-0x01f00000 : "jffs2_config_area"
- 0x01f00000-0x02000000 : "U-Boot-high"
- 0x00100000-0x00200000 : "Kernel-1"
- 0x00200000-0x00d00000 : "CRAMFS-1"
- 0x00d00000-0x00e00000 : "Kernel-2"
- 0x00e00000-0x01900000 : "CRAMFS-2"
- NET4: Linux TCP/IP 1.0 for NET4.0
- IP Protocols: ICMP, UDP, TCP, IGMP
- IP: routing cache hash table of 512 buckets, 4Kbytes
- TCP: Hash tables configured (established 4096 bind 8192)
- eth0: PHY is STE100P (0x1C040011)
- eth0: No link detected
- eth1: PHY is STE100P (0x1C040011)
- eth1: No link detected
- IP-Config: Incomplete network configuration information.
- NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
- 802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- RAMDISK: Compressed image found at block 0
- Freeing initrd memory: 4795k freed
- VFS: Mounted root (ext2 filesystem).
- Mounted devfs on /dev
- Freeing unused kernel memory: 52k init
- INIT: version 2.78 booting
- Activating swap...
- ^@^@^@^@^@^@^@^@^@mount: cannot read /proc/mounts: No such file or directory
- ^@^@^@mount: cannot read /proc/mounts: No such file or directory
- ^@^@^@Mounting local filesystems...
- ^@^@^@^@Setting up IP spoofing protection: ^@rp_filter.
- ^@^@Disable TCP/IP Explicit Congestion Notification: ^@done.
- Configuring n
- INIT: Entering runlevel: 3
- ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@Starting internet superserver: inetd^@^@.
- ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@^@SPI^@ Dr^@ive^@r o^@f ^@Nov^@ 12^@ 20^@08 ^@03^@:02^@:06, SPI Major = 91
- Create spi device node /dev/spi/spidev0
- Create spi device node /dev/spi/spidev1
- Create spi device node /dev/spi/spidev2
- Create spi device node BKGND Driver of Nov 12 2008 03:07:18, BKGND Major = 92
- /dev/spi/spidev3
- SPI Driver loaded
- Create wdog bkgnd device node /dev/bkgnd
- BHLD: Device IDs
- KGND WDOG Driver SoC part number = MSC7120
- loaded
- System Part and Revision Id = 0x80400012
- e300 System Version = 0x80400012
- e300 Processor Version = 0x80840010
- Bridge Device Id / Revision Number = 0x00000010
- DMASAR Device Id / Revision Number = 0x00000010
- GPON MAC Device Id / Revision Number = 0x000f1012
- DSP Device Id = 0x10081000
- eTSEC0 Block Revision = 0x01240000
- eTSEC0 Block Configuration = 0x003000f0
- eTSEC1 Block Revision = 0x01240000
- eTSEC1 Block Configuration = 0x003800f0
- Creating device node /dev/msc7120_hld c 100 0
- alexQuadPhy Driver loaded
- Remote Inventory Checksum OK
- 0x20 0x20 0x20 0x20 0x20 0x20 0x20 0x20
- 0x39 0x46 0x32 0x41 0x31 0x42 0x41 0x35
- Inventory Board Serial Number: F9A2B15A
- 0x5E 0x00
- Inventory Software Image Info:
- X1 Bit0 = 0, Image 0 is NOT committed.
- X1 Bit1 = 1, Image 0 is valid.
- X1 Bit2 = 1, Image 1 is committed.
- X1 Bit3 = 1, Image 1 is valid.
- X1 Bit4 = 1, Image 1 is ACTIVE.
- X1 Bit5 = 0, Software Power-on Reboot.
- X1 Bit6 = 1, Serial Number Enabled.
- X2 Bit 6 = 0, Sniffer Disabled.
- X2 Bit 7 = 0, Board Boots from FLASH.
- Changing Magic code to 010 for 020E board
- !!!PortConfig = 0xAE 0x02 0x00 0x00 0x00 checksum= 0xEA8A, allzeros= 0x0000
- LED Driver - Dec 3 2008 02:40:25, LED Driver Major = 102
- Create lldrv device node /dev/llCurrituck Driver - Nov 12 2008 03:03:20, Currituck Major = 93
- drv
- Currituck Driver loaded
- Create currituck device node /dev/currituck
- Sun Jan 1 01:00:00 UTC 2006
- Setting core file size to 4096
- Starting /usr/alcatel/bin/dbg_logger
- Starting /usr/alcatel/bin/bkgndprocess
- Starting /usr/alcatel/bin/ontah
- Starting /usr/alcatel/bin/parser
- Starting /usr/alcatel/bin/omciMgr
- Starting /usr/alcatel/bin/gponi2c-mpc line 172, no Ack for packet a1
- Mac
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- i2c-mpc line 172, no Ack for packet a1
- i2c-mpc line 716, with error -121
- BASE ================== SOC
- Board MAC 00:07:72:65:84:66
- GPON MAC Device Identification:
- Revision Code: 000f
- Asic ID Code: 1012
- eth0: PHY is STE100P (0x1C040011)
- eth0: No link detected
- eth1: PHY is STE100P (0x1C040011)
- eth1: No link detected
- eth0.2: add 01:00:5e:00:00:01 mcast address to master interface
- eth0.401: add 01:00:5e:00:00:01 mcast address to master interface
- Unzip/start /usr/alcatel/bin/tagging
- ************************************************************
- You are trying to setup at least one DMASAR channel, however
- the MAC is not in operational state or traffic is not enabled.
- usbwc_state = 0x00000000; dsphy_traffic_en = 0x00000000.
- ***********************************************************
- eth0: No link detected
- gfar_rx_lockup_polling: statistics for eTSEC0 rx lockup detection:
- suspected lockup 0
- legitimate drops 0
- queue halts 0
- repeat count 1 0
- repeat count 2 0
- repeat count 3 0
- repeat count 4 0
- repeat count 5 0
- repeat count 6 0
- repeat count 7 0
- repeat count 8 0
- repeat count 9 0
- ring/buf ptr delta 0
- KICKED 0
- gfar_rx_lockup_polling: starting eTSEC0 Rx lockup polling
- gfar_rx_lockup_polling: statistics for eTSEC1 rx lockup detection:
- suspected lockup 0
- legitimate drops 0
- queue halts 0
- repeat count 1 0
- repeat count 2 0
- repeat count 3 0
- repeat count 4 0
- repeat count 5 0
- repeat count 6 0
- repeat count 7 0
- repeat count 8 0
- repeat count 9 0
- ring/buf ptr delta 0
- KICKED 0
- gfar_rx_lockup_polling: starting eTSEC1 Rx lockup polling
- T&D :module not registeredT&D :module not registeredfcs calculation is true, SoC 1.2
- ONU PART NUM is 3FE28683ACAA
- Starting /usr/alcatel/bin/download
- Starting /usr/alcatel/bin/IGMP
- Setting queue size to 64K
- Starting /usr/alcatel/bin/ethOAM
- Starting /usr/alcatel/bin/rateShaping
- Starting /usr/alcatel/bin/eqpt
- HSI Raw Socket 3 bound to interface eth0.6, Interface ID = 0x8, Filter =0x8902
- VOIP Raw Socket 4 bound to interface eth0.201, Interface ID = 0xb, Filter =0x8902
- Getting OMCI msg queue Id
- end of this one
- ifname is eth0.4094
- Launch a new tread here to receive RS packet
- success launchn a new thread
- eth0.4093: Setting MAC address to 02 4c f9 a2 b1 5a.
- device eth0 entered promiscuous mode
- VLAN (eth0.4093): Setting underlying device (eth0) to promiscuous mode.
- eth0.4093: add 01:00:5e:00:00:01 mcast address to master interface
- Omcimain::Creating autonomous ME's.
- omciMgr is running!!!
- ***
- *** onuInit complete
- *** All tasks started
- ***
Add Comment
Please, Sign In to add comment