hardware configuration

U-Boot 1.2.0 (Apr 15 2008 - 17:24:31)
PSPU-Boot 1.0.0.4

DRAM:  32 MB
Found SPANSION Flash
Flash:  8 MB
In:    serial
Out:   serial
Err:   serial
Press SPACE to abort autoboot in 3 second(s)

=> help
?       - alias for 'help'
autoscr - run script from memory
base    - print or set address offset
bdinfo  - print Board Info structure
boot    - boot default, i.e., run 'bootcmd'
bootd   - boot default, i.e., run 'bootcmd'
bootm   - boot application image from memory
bootp   - boot image via network using BootP/TFTP protocol
cmp     - memory compare
coninfo - print console devices and information
cp      - memory copy
crc32   - checksum calculation
echo    - echo args to console
erase   - erase FLASH memory
eval    - return addition/subraction
exit    - exit script
flinfo  - print FLASH memory information
go      - start application at address 'addr'
help    - print online help
iminfo  - print header information for application image
imls    - list all images found in flash
itest   - return true/false on integer compare
loadb   - load binary file over serial line (kermit mode)
loads   - load S-Record file over serial line
loady   - load binary file over serial line (ymodem mode)
loop    - infinite loop on address range
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
printenv- print environment variables
protect - enable or disable FLASH write protection
rarpboot- boot image via network using RARP/TFTP protocol
reset   - Perform RESET of the CPU
run     - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv  - set environment variables
sleep   - delay execution for some time
test    - minimal test like /bin/sh
tftpboot- boot image via network using TFTP protocol
version - print monitor version

=> base
Base Address: 0x00000000

=> bdinfo
arch_number = 0x0000047B
env_t       = 0x00000000
boot_params = 0x80000100
DRAM bank   = 0x00000000
-> start    = 0x80000000
-> size     = 0x02000000
ethaddr     = 00:40:7B:00:00:03
ip_addr     = 192.168.100.1
baudrate    = 115200 bps

=> coninfo
List of available devices:
serial   80000003 SIO stdin stdout stderr
=> echo

=> iminfo

## Checking Image at 80000100 ...
   Bad Magic Number

=> flinfo

Bank # 1: Spansion Serial Flash FLASH_S25FL064A
  Size: 8 MB in 128 Sectors
  Sector Start Addresses:
    48000000 (RO) 48010000 (RO) 48020000 (RO) 48030000 (RO) 48040000
    48050000      48060000      48070000      48080000      48090000
    480A0000      480B0000      480C0000      480D0000      480E0000
    480F0000      48100000      48110000      48120000      48130000
    48140000      48150000      48160000      48170000      48180000
    48190000      481A0000      481B0000      481C0000      481D0000
    481E0000      481F0000      48200000      48210000      48220000
    48230000      48240000      48250000      48260000      48270000
    48280000      48290000      482A0000      482B0000      482C0000
    482D0000      482E0000      482F0000      48300000      48310000
    48320000      48330000      48340000      48350000      48360000
    48370000      48380000      48390000      483A0000      483B0000
    483C0000      483D0000      483E0000      483F0000      48400000
    48410000      48420000      48430000      48440000      48450000
    48460000      48470000      48480000      48490000      484A0000
    484B0000      484C0000      484D0000      484E0000      484F0000
    48500000      48510000      48520000      48530000      48540000
    48550000      48560000      48570000      48580000      48590000
    485A0000      485B0000      485C0000      485D0000      485E0000
    485F0000      48600000      48610000      48620000      48630000
    48640000      48650000      48660000      48670000      48680000
    48690000      486A0000      486B0000      486C0000      486D0000
    486E0000      486F0000      48700000      48710000      48720000
    48730000      48740000      48750000      48760000      48770000
    48780000      48790000      487A0000      487B0000      487C0000
    487D0000      487E0000      487F0000

=> md nvram
00000000: 7b1b1185 77ef4e0f 20082c8c 561a45d0    {...w.N. .,.V.E.
00000010: 699012a1 c36840a9 8f825272 9fd95faf    [email protected].._.
00000020: 874d9a09 2135ccbd 0e7af1c9 057c0c0d    .M..!5...z...|..
00000030: 2558d71b 8104d299 d432a5c1 4c1ffbbe    %X.......2..L...
00000040: fcde9629 4d6d1dc9 89004441 61ad9815    ...)Mm....DAa...
00000050: ca0eabf8 6a6af78e 314ab85d e4140ca9    ....jj..1J.]....
00000060: 2083dc8c 49f7c119 1d5c0a4c 6779124e     ...I....\.Lgy.N
00000070: 7015ee4a e23ac75c cd90105c c6a857fc    p..J.:.\...\..W.
00000080: 5a144938 8b24353d 32240101 7e8713c7    Z.I8.$5=2$..~...
00000090: 2c8c820b 3944b99a 3b2eab43 d6c57a7f    ,...9D..;..C..z.
000000a0: 4244141c 9a31cb6d 25730c9a effd1ee5    BD...1.m%s......
000000b0: e388c36a aaa9e83a dd1a0c60 1de95ada    ...j...:...`..Z.
000000c0: 0584e4e2 d8905686 7255640e a905f12e    ......V.rUd.....
000000d0: f1860029 b88d0f99 4c4126f2 feb59674    ...)....LA&....t
000000e0: 0c7f49cf 66e4498a 35cd0626 53a4d9a9    ..I.f.I.5..&S...
000000f0: 2614055a ea7da589 99dd05c5 75fdc463    &..Z.}......u..c

=> boot
*** ACTIMAGE = 2, will try to boot UBFI2 stored @0x483F0000
## Executing script at 483f0000


Loading forceWare Bootscript...
Booting...


## Booting image at 483f1048 ...
   Image Name:   forceWare
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    672224 Bytes = 656.5 kB
   Load Address: 80a00000
   Entry Point:  80a00000
   Verifying Checksum ... OK
OK

Starting kernel ...

Starting LZMA Uncompression Algorithm.
Compressed file is LZMA format.
Linux version 2.6.18_pro500 ([email protected]) (gcc version 4.2.0 TI-Puma5 20100224) #230 PREEMPT Wed Jun 1 01:00:34 EDT 2011
CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
Machine: puma5
Ignoring unrecognised tag 0x00000000
Memory policy: ECC disabled, Data cache writethrough
Reserved 1024k DSP memory starting from Physical 0x81f00000
CPU0: D VIPT write-back cache
CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Real-Time Preemption Support (C) 2004-2006 Ingo Molnar
Built 1 zonelists.  Total pages: 7936
Kernel command line: root=/dev/mtdblock3 mtdparts=spansion:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x2d0000@0x4a0000(fWare-FS),0x50000@0x7B0000(nvram),0x3B0000@0x40000(UBFI1),0x3B0000@0x3F0000(UBFI2) console=ttyS0,115200n8
WARNING: experimental RCU implementation.
Interrupt controller revision : 4e822100
PID hash table entries: 128 (order: 7, 512 bytes)
Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
WARN: boardtype variable was not set, using default (tnetc550)
Board type: tnetc550
Initialized Peripheral Port Remap Register to base : 0x50000000
Puma5 Timer0 initialized
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 31MB = 31MB total
Memory: 29384KB available (1628K code, 337K data, 72K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
PAL_cppi4Init : There is a room for 1314 more descriptors
Off chip memory allocated: 349184
QMgr Init: buffer after alignment: 81e00000
avalanche_ppd_init: PP system  initialized successfully.
avalanche_ppd_init(729):return code 0x00
HIL Core: Profile static has been Loaded.
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 3, 32768 bytes)
TCP bind hash table entries: 512 (order: 1, 14336 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
squashfs: version 3.3 (2007/10/31) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered (default)
watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
TI LED driver initialized [major=254]
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
loop: loaded (max 8 devices)
Loading cpgmac driver for puma5
Cpmac: Error getting mac from Boot enviroment for eth0
Cpmac: Using default mac address: 08.00.28.32.06.02
Pass kernel parameter ethaddr0=xx.xx.xx.xx.xx.xx
to set mac address
TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
Cpmac: Installed 1 instances.
Cpmac driver is allocating buffer memory at init time.
i2c /dev entries driver
Serial Flash [Bus:0 CS:0] : s25fl064a 8192KB, 128 sectors each  64KB
7 cmdlinepart partitions found on MTD device spansion
partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
partitions[3] = {.name = fWare-FS, .offset = 0x004a0000,.size = 0x002d0000 (2880K) }
partitions[4] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
partitions[5] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
partitions[6] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
Creating 7 MTD partitions on "spansion":
0x00000000-0x00020000 : "U-Boot"
0x00020000-0x00030000 : "env1"
0x00030000-0x00040000 : "env2"
0x004a0000-0x00770000 : "fWare-FS"
0x007b0000-0x00800000 : "nvram"
0x00040000-0x003f0000 : "UBFI1"
0x003f0000-0x007a0000 : "UBFI2"
Serial Flash [Bus:0 CS:1] : No device found
ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500           (irq = 0)
ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8           (irq = 0)
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 72K