API tools faq
paste
remim

smartctl -a device # après badblocks -w par mkfs.ext4 -cc

remim
Aug 11th, 2018
65
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.83 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.14.52-gentoo] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate NAS HDD
  6. Device Model: ST4000VN000-1H4168
  7. Serial Number: W300QPNC
  8. LU WWN Device Id: 5 000c50 06deb2658
  9. Firmware Version: SC43
  10. User Capacity: 4 000 787 030 016 bytes [4,00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5900 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
  17. Local Time is: Sun Aug 12 02:39:09 2018 CEST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART Status not supported: Incomplete response, ATA output registers missing
  23. SMART overall-health self-assessment test result: PASSED
  24. Warning: This result is based on an Attribute check.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 107) seconds.
  35. Offline data collection
  36. capabilities: (0x73) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. No Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 1) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 539) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 2) minutes.
  55. SCT capabilities: (0x10bd) SCT Status supported.
  56. SCT Error Recovery Control supported.
  57. SCT Feature Control supported.
  58. SCT Data Table supported.
  59.  
  60. SMART Attributes Data Structure revision number: 10
  61. Vendor Specific SMART Attributes with Thresholds:
  62. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  63. 1 Raw_Read_Error_Rate 0x000f 118 082 006 Pre-fail Always - 192130920
  64. 3 Spin_Up_Time 0x0003 092 091 000 Pre-fail Always - 0
  65. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 254
  66. 5 Reallocated_Sector_Ct 0x0033 085 085 010 Pre-fail Always - 20160
  67. 7 Seek_Error_Rate 0x000f 082 060 030 Pre-fail Always - 4494024507
  68. 9 Power_On_Hours 0x0032 062 062 000 Old_age Always - 33356
  69. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  70. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 252
  71. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  72. 187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 1062
  73. 188 Command_Timeout 0x0032 100 074 000 Old_age Always - 128854720599
  74. 189 High_Fly_Writes 0x003a 001 001 000 Old_age Always - 1736
  75. 190 Airflow_Temperature_Cel 0x0022 065 050 045 Old_age Always - 35 (Min/Max 34/35)
  76. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  77. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 50
  78. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 737
  79. 194 Temperature_Celsius 0x0022 035 050 000 Old_age Always - 35 (0 16 0 0 0)
  80. 197 Current_Pending_Sector 0x0012 085 085 000 Old_age Always - 2528
  81. 198 Offline_Uncorrectable 0x0010 085 085 000 Old_age Offline - 2528
  82. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 1063 (device log contains only the most recent five errors)
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 1063 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 25 00 08 ff ff ff ef 00 3d+04:40:01.067 READ DMA EXT
  112. 25 00 08 ff ff ff ef 00 3d+04:39:59.623 READ DMA EXT
  113. 25 00 08 ff ff ff ef 00 3d+04:39:58.677 READ DMA EXT
  114. 25 00 08 ff ff ff ef 00 3d+04:39:58.676 READ DMA EXT
  115. 25 00 08 ff ff ff ef 00 3d+04:39:58.095 READ DMA EXT
  116.  
  117. Error 1062 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 25 00 08 ff ff ff ef 00 3d+04:39:52.394 READ DMA EXT
  129. 25 00 08 ff ff ff ef 00 3d+04:39:48.604 READ DMA EXT
  130. 25 00 08 ff ff ff ef 00 3d+04:39:47.742 READ DMA EXT
  131. 25 00 08 ff ff ff ef 00 3d+04:39:46.836 READ DMA EXT
  132. ef 10 02 00 00 00 a0 00 3d+04:39:46.835 SET FEATURES [Enable SATA feature]
  133.  
  134. Error 1061 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. 25 00 08 ff ff ff ef 00 3d+04:39:42.879 READ DMA EXT
  146. 25 00 08 ff ff ff ef 00 3d+04:39:39.220 READ DMA EXT
  147. 25 00 08 ff ff ff ef 00 3d+04:39:37.582 READ DMA EXT
  148. ef 10 02 00 00 00 a0 00 3d+04:39:37.582 SET FEATURES [Enable SATA feature]
  149. 27 00 00 00 00 00 e0 00 3d+04:39:37.581 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  150.  
  151. Error 1060 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 25 00 08 ff ff ff ef 00 3d+04:39:33.695 READ DMA EXT
  163. 25 00 08 ff ff ff ef 00 3d+04:39:29.926 READ DMA EXT
  164. 25 00 08 ff ff ff ef 00 3d+04:39:28.970 READ DMA EXT
  165. ef 10 02 00 00 00 a0 00 3d+04:39:28.969 SET FEATURES [Enable SATA feature]
  166. 27 00 00 00 00 00 e0 00 3d+04:39:28.969 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  167.  
  168. Error 1059 occurred at disk power-on lifetime: 33349 hours (1389 days + 13 hours)
  169. When the command that caused the error occurred, the device was active or idle.
  170.  
  171. After command completion occurred, registers were:
  172. ER ST SC SN CL CH DH
  173. -- -- -- -- -- -- --
  174. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  175.  
  176. Commands leading to the command that caused the error were:
  177. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  178. -- -- -- -- -- -- -- -- ---------------- --------------------
  179. 25 00 08 ff ff ff ef 00 3d+04:39:25.063 READ DMA EXT
  180. 25 00 08 ff ff ff ef 00 3d+04:39:23.900 READ DMA EXT
  181. 25 00 08 ff ff ff ef 00 3d+04:39:22.889 READ DMA EXT
  182. ef 10 02 00 00 00 a0 00 3d+04:39:22.888 SET FEATURES [Enable SATA feature]
  183. 27 00 00 00 00 00 e0 00 3d+04:39:22.888 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  184.  
  185. SMART Self-test log structure revision number 1
  186. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  187.  
  188. SMART Selective self-test log data structure revision number 1
  189. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  190. 1 0 0 Not_testing
  191. 2 0 0 Not_testing
  192. 3 0 0 Not_testing
  193. 4 0 0 Not_testing
  194. 5 0 0 Not_testing
  195. Selective self-test flags (0x0):
  196. After scanning selected spans, do NOT read-scan remainder of disk.
  197. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!