Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <5>[ 0.000000] Linux version 2.6.32.9-perf (root@motafoca) (gcc version 4.5.1 (Sourcery G++ Lite 2010.09-51) ) #10 PREEMPT Sun Apr 3 23:13:32 BRT 2011
- <4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
- <4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: GT-I5500 Board
- <6>[ 0.000000] Partition (from atag) mibib -- Offset:0 Size:6
- <6>[ 0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2
- <6>[ 0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3
- <6>[ 0.000000] Partition (from atag) amss -- Offset:b Size:64
- <6>[ 0.000000] Partition (from atag) efs2 -- Offset:6f Size:61
- <6>[ 0.000000] Partition (from atag) nv_backup -- Offset:d0 Size:14
- <6>[ 0.000000] Partition (from atag) fota -- Offset:e4 Size:64
- <6>[ 0.000000] Partition (from atag) arm11boot -- Offset:148 Size:8
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 54528
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c06762d0, node_mem_map c088d000
- <7>[ 0.000000] Normal zone: 426 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 54102 pages, LIFO batch:15
- <6>[ 0.000000] allocating 10485760 bytes at c1306000 (1506000 physical) for mdp pmem arena
- <6>[ 0.000000] allocating 7860224 bytes at c1d06000 (1f06000 physical) for adsp pmem arena
- <6>[ 0.000000] allocating 372736 bytes at (0x80000 physical) for audio pmem arena
- <6>[ 0.000000] allocating 655360 bytes at c2485000 (2685000 physical) for fb
- <6>[ 0.000000] allocating 114688 bytes at c2600000 (2800000 physical) for kernel ebi1 pmem arena
- <6>[ 0.000000] allocating 2097152 bytes at (0xD700000 physical) for KGSL
- <6>[ 0.000000] L210 cache controller enabled
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 54102
- <5>[ 0.000000] Kernel command line: mem=213M console=NULL hw=4 fbaddr=0xd4000
- <4>[ 0.000000] Europa H/W revision : 0x04
- <6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.000000] Memory: 213MB = 213MB total
- <5>[ 0.000000] Memory: 185472KB available (6164K code, 2370K data, 160K init, 0K highmem)
- <6>[ 0.000000] NR_IRQS:261
- <4>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000000] Calibrating delay loop... 598.36 BogoMIPS (lpj=997376)
- <4>[ 0.066800] Mount-cache hash table entries: 512
- <6>[ 0.067341] CPU: Testing write buffer coherency:
- <1>[ 0.067445] Initialized Zero page successfully
- <4>[ 0.067493] ok
- <6>[ 0.069991] NET: Registered protocol family 16
- <3>[ 0.070686] smem_find(137, 64): wrong size 56
- <6>[ 0.070793] socinfo_init: v2, id=67, ver=1.2, raw_id=961, raw_ver=2
- <6>[ 0.070826] acpu_clock_init()
- <6>[ 0.070991] L val: PLL0: 50, PLL1: 12, PLL2: 62
- <6>[ 0.071090] ACPU running at 600000 KHz
- <6>[ 0.071106] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
- <6>[ 0.071138] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
- <6>[ 0.071166] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
- <6>[ 0.071196] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
- <6>[ 0.071225] 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
- <6>[ 0.071255] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
- <6>[ 0.071285] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
- <6>[ 0.071315] 6 400000 2 3 133333 3 160000 5 4 3 7 -1 8
- <6>[ 0.071343] 7 480000 0 2 160000 3 160000 5 4 6 -1 -1 8
- <6>[ 0.071373] 8 600000 2 2 200000 3 200000 7 -1 6 -1 -1 -1
- <6>[ 0.071393] Shared PLL control available.
- <6>[ 0.071406] 5 scaling frequencies supported.
- <4>[ 0.081808] bio: create slab <bio-0> at 0
- <5>[ 0.082831] SCSI subsystem initialized
- <6>[ 0.083136] usbcore: registered new interface driver usbfs
- <6>[ 0.083258] usbcore: registered new interface driver hub
- <6>[ 0.083440] usbcore: registered new device driver usb
- <6>[ 0.083596] msm_i2c_probe
- <6>[ 0.083701] msm_i2c_probe: clk_ctl 35d, 100000 Hz
- <6>[ 0.085216] Bluetooth: Core ver 2.15
- <6>[ 0.085371] NET: Registered protocol family 31
- <6>[ 0.085386] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.085405] Bluetooth: HCI socket layer initialized
- <6>[ 0.085576] Switching to clocksource dg_timer
- <6>[ 0.094740] NET: Registered protocol family 2
- <6>[ 0.094983] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.095558] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- <6>[ 0.095911] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 0.096138] TCP: Hash tables configured (established 8192 bind 8192)
- <6>[ 0.096156] TCP reno registered
- <6>[ 0.096373] NET: Registered protocol family 1
- <6>[ 0.096673] Trying to unpack rootfs image as initramfs...
- <6>[ 0.511958] Freeing initrd memory: 3092K
- <4>[ 0.515016] [DP] drop_caches_registerd
- <6>[ 0.515098] smd probe
- <6>[ 0.515113] smd_core_init()
- <6>[ 0.515206] smd_core_init() done
- <6>[ 0.515228] smd_alloc_loopback_channel: 'local_loopback' cid=100
- <6>[ 0.516398] smd_alloc_channel() 'DS' cid=0
- <6>[ 0.516540] smd_alloc_channel() 'RPCCALL' cid=2
- <6>[ 0.516650] smd_alloc_channel() 'DATA1' cid=7
- <6>[ 0.516746] smd_alloc_channel() 'DATA2' cid=8
- <6>[ 0.516853] smd_alloc_channel() 'DATA3' cid=9
- <6>[ 0.516951] smd_alloc_channel() 'DATA4' cid=10
- <6>[ 0.517048] smd_alloc_channel() 'DATA5' cid=11
- <6>[ 0.517145] smd_alloc_channel() 'DATA6' cid=12
- <6>[ 0.517241] smd_alloc_channel() 'DATA7' cid=13
- <6>[ 0.517341] smd_alloc_channel() 'DATA11' cid=17
- <6>[ 0.517451] smd_alloc_channel() 'DAL00' cid=38
- <6>[ 0.517550] smd_alloc_channel() 'DATA5_CNTL' cid=39
- <6>[ 0.517666] smd_alloc_channel() 'DATA6_CNTL' cid=40
- <6>[ 0.517778] smd_alloc_channel() 'DATA7_CNTL' cid=41
- <3>[ 0.517983] Notify: smsm init
- <6>[ 0.518925] SMD Packet Port Driver Initialized.
- <6>[ 0.519538] SMD: ch 2 0 -> 1
- <6>[ 0.519653] SMD: ch 2 1 -> 2
- <6>[ 0.519991] [adsp.c:adsp_init] rs3000000a -- 0
- <6>[ 0.520683] [audpp.c:audpp_probe] Number of decoder supported 5
- <6>[ 0.520703] [audpp.c:audpp_probe] Number of concurrency supported 7
- <6>[ 0.520723] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
- <6>[ 0.520740] [audpp.c:audpp_probe] queueid:13
- <6>[ 0.520755] [audpp.c:audpp_probe] decid:0
- <6>[ 0.520768] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 0.520785] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
- <6>[ 0.520801] [audpp.c:audpp_probe] queueid:14
- <6>[ 0.520816] [audpp.c:audpp_probe] decid:1
- <6>[ 0.520830] [audpp.c:audpp_probe] nr_codec_support:4
- <6>[ 0.520846] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
- <6>[ 0.520861] [audpp.c:audpp_probe] queueid:15
- <6>[ 0.520876] [audpp.c:audpp_probe] decid:2
- <6>[ 0.520891] [audpp.c:audpp_probe] nr_codec_support:4
- <6>[ 0.520906] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
- <6>[ 0.520923] [audpp.c:audpp_probe] queueid:16
- <6>[ 0.520938] [audpp.c:audpp_probe] decid:3
- <6>[ 0.520951] [audpp.c:audpp_probe] nr_codec_support:4
- <6>[ 0.520968] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
- <6>[ 0.520983] [audpp.c:audpp_probe] queueid:17
- <6>[ 0.520998] [audpp.c:audpp_probe] decid:4
- <6>[ 0.521013] [audpp.c:audpp_probe] nr_codec_support:1
- <4>[ 0.523196] THNAK YOU!!
- <4>[ 0.523216] fe2f, b9c40000, 100
- <4>[ 0.523285] [VIB] platform driver register result : 0
- <6>[ 0.523305] [H2W] h2w_init JACK_S_35(28), SEND_END(29)
- <6>[ 0.523545] [H2W] Registering H2W (headset) driver
- <6>[ 0.530393] [H2W] detect_irq_handler
- <6>[ 0.530418] [H2W] detect_irq_handler GPIO_JACK_S_35 is LOW
- <6>[ 0.530531] Headset Driver: Start gpio inputs for h2w in interrupt mode
- <6>[ 0.530910] input: europa_headset as /devices/virtual/input/input0
- <6>[ 0.542698] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 0.542710] tick = 75196
- <6>[ 0.542715] stamp = 808464432
- <4>[ 0.542741] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <6>[ 0.545698] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 0.545710] tick = 235211
- <6>[ 0.545715] stamp = 51690542137098579
- <4>[ 0.545735] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <6>[ 0.548186] ashmem: initialized
- <6>[ 0.549461] msgmni has been set to 368
- <6>[ 0.549723] alg: No test for cipher_null (cipher_null-generic)
- <6>[ 0.549923] alg: No test for ecb(cipher_null) (ecb-cipher_null)
- <6>[ 0.550060] alg: No test for digest_null (digest_null-generic)
- <6>[ 0.550180] alg: No test for compress_null (compress_null-generic)
- <6>[ 0.550451] [H2W] detect_event_timer_func
- <6>[ 0.550520] [H2W] detection_work
- <6>[ 0.554856] alg: No test for stdrng (krng)
- <6>[ 0.637830] alg: No test for ghash (ghash-generic)
- <6>[ 0.637910] io scheduler noop registered
- <6>[ 0.638046] io scheduler bfq registered (default)
- <6>[ 0.638805] fbaddr cmdline is 0xd4000
- <6>[ 0.699910] msm_fb_probe: phy_Addr = 0x2685000 virt = 0xcd900000
- <6>[ 0.700601] MDP HW Base phy_Address = 0xaa200000 virt = 0xcda00000
- <4>[ 0.701151] s6d04m0 start lcdc_s6d04m0_panel_init
- <4>[ 0.701206] s6d04m0 start s6d04m0_probe
- <4>[ 0.701326] lcdc_s6d04m0_panel_init
- <4>[ 0.805270] pc_clk_set_rate id : 42, rate : 8192000
- <4>[ 0.805343] pc_clk_set_rate id : 0, rate : 8192000
- <4>[ 0.805351] , rc : 0
- <4>[ 0.805363] pc_clk_set_rate id : 43, rate : 8192000
- <4>[ 0.805401] pc_clk_set_rate id : -1, rate : 8192000
- <4>[ 0.805411] , rc : 0
- <4>[ 0.805456] s6d04m0 start lcdc_s6d04m0_panel_on
- <4>[ 0.805478] s6d04m0 lcdc_s6d04m0_set_backlight:255,30
- <4>[ 0.805681] ldi mtpdata: 51 88 11
- <5>[ 0.805691] lcd type is smd
- <4>[ 0.821058] Console: switching to colour frame buffer device 60x53
- <6>[ 0.831840] FrameBuffer[0] 240x320 size=655360 bytes is registered successfully!
- <6>[ 0.832206] Registered led device: lcd-backlight
- <6>[ 0.840541] diagfwd initializing ..
- <6>[ 0.841033] diagchar initializing ..
- <6>[ 0.841266] diagchar initialized
- <6>[ 0.841386] [drm] Initialized drm 1.1.0 20060810
- <6>[ 0.841623] msm_serial: driver initialized
- <6>[ 0.841843] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
- <6>[ 0.842323] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
- <6>[ 0.842690] msm_serial_hs module loaded
- <6>[ 0.845853] brd: module loaded
- <6>[ 0.849070] loop: module loaded
- <6>[ 0.849240] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
- <6>[ 0.849343] pmem: Initializing pmem (user-space) as cached
- <6>[ 0.850070] pmem: Initializing pmem_adsp (user-space) as non-cached
- <6>[ 0.850653] pmem: Initializing pmem_audio (user-space) as non-cached
- <6>[ 0.851395] PPP generic driver version 2.4.2
- <6>[ 0.851633] PPP Deflate Compression module registered
- <6>[ 0.851651] PPP BSD Compression module registered
- <6>[ 0.852946] PPP MPPE Compression module registered
- <6>[ 0.852970] NET: Registered protocol family 24
- <6>[ 0.853040] PPPoL2TP kernel driver, V1.0
- <6>[ 0.853060] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 0.853081] CSLIP: code copyright 1989 Regents of the University of California.
- <4>[ 0.853853] smc91x: not found (-19).
- <4>[ 0.854033] rmnet_init
- <6>[ 0.855595] msm_otg_probe: rpc_connect(0)
- <4>[ 0.855683] pc_clk_set_rate id : 36, rate : 60000000
- <4>[ 0.855728] pc_clk_set_rate id : -1, rate : 60000000
- <4>[ 0.855736] , rc : 0
- <6>[ 0.969218] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 0.969328] msm_hsusb_rpc_connect: usb_ep already connected
- <6>[ 0.969904] host driver registered w/ tranceiver
- <6>[ 0.970128] usbcore: registered new interface driver cdc_acm
- <6>[ 0.970153] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 0.970554] peripheral driver registered w/ tranceiver
- <6>[ 0.970723] adb_function_init
- <6>[ 0.971473] DUN is registerd
- <4>[ 0.971574] android_usb gadget: using random self ethernet address
- <4>[ 0.971609] android_usb gadget: using random host ethernet address
- <6>[ 0.972176] usb0: MAC ce:c9:6a:2b:31:d0
- <6>[ 0.972194] usb0: HOST MAC 86:b7:ae:7f:b4:fe
- <6>[ 0.972209] mass_storage_function_add
- <6>[ 0.972573] android_usb gadget: Number of LUNs=1
- <6>[ 0.972604] android_usb gadget: android_usb ready
- <6>[ 0.972636] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
- <4>[ 0.972944] [gpio_event_matrix_func:391] hw rev = 4
- <6>[ 0.973229] GPIO Matrix Keypad Driver: Start keypad matrix for europa_keypad0 in interrupt mode
- <6>[ 0.973548] input: europa_keypad0 as /devices/virtual/input/input1
- <7>[ 0.974499] RTC Registering with rs30000048
- <6>[ 0.974668] msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
- <3>[ 0.976238] msm_rpc_client_req: RPC call was not successful (3)
- <7>[ 0.976264] msmrtc_setup_cb: RPC client registration for PROC:12 failed
- <7>[ 0.976281] msmrtc_probe: Could not initialize RPC callback
- <6>[ 0.976783] using rtc device, msm_rtc, for alarms
- <7>[ 0.976806] msm_rtc: dev (254:0)
- <6>[ 0.976849] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
- <7>[ 0.977056] msm_rtc_secure: dev (254:1)
- <6>[ 0.977073] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
- <6>[ 0.977159] i2c /dev entries driver
- <6>[ 0.977984] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)
- <6>[ 0.978379] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
- <6>[ 0.978544] [FSA9280]: probe
- <6>[ 0.978558] [FSA9280]: init
- <4>[ 0.979619] [FSA9280]: Initial control reg 0x02 : 0x1e
- <6>[ 0.985628] [FSA9280]: fsa9280 sensor init sequence done
- <6>[ 0.985728] [FSA9280]: probe complete
- <6>[ 0.985804] BMA_init
- <6>[ 0.986056] bma_probe
- <4>[ 0.986069] [bma_probe] slave addr = 38
- <6>[ 0.986656] Bosch Sensortec Device detected!
- <6>[ 0.986666] BMA023 registered I2C driver!
- <6>[ 0.986841] bma accel device create ok
- <6>[ 0.990096] mmc31xx driver: init
- <3>[ 0.990319] [mmc31xx_probe] +
- <3>[ 1.002294] [mmc31xx_probe] -
- <6>[ 1.002368] ecompass driver: init
- <6>[ 1.002664] input: ecompass_data as /devices/virtual/input/input2
- <6>[ 1.002963] Linux video capture interface: v2.00
- <4>[ 1.003726] pc_clk_set_rate id : 41, rate : 24000000
- <4>[ 1.003816] pc_clk_set_rate id : 0, rate : 24000000
- <4>[ 1.003824] , rc : 0
- <4>[ 1.008858] <=PCAM=> cam_pw start
- <4>[ 1.009864] [Battery] msm_batt_init
- <3>[ 1.010099] [Battery] msm_batt_probe
- <6>[ 1.011236] batt_clnt_handle = 0
- <6>[ 1.011893] msm_batt_enable_filter: vbatt Filter enabled successfully.
- <3>[ 1.044488] [Battery] get_charger_type charger_type is (2)
- <4>[ 1.044508] [Battery] get_charger_type : wake_lock!!! !!!!
- <4>[ 1.044753] [Battery] get_charging_status : event_flag =8
- <4>[ 1.044979] [Battery] Charging state is changed [ff]=>[5] Batt Level [3685] Percent [99]
- <6>[ 1.047181] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- <6>[ 1.047464] device-mapper: multipath: version 1.1.0 loaded
- <6>[ 1.047486] device-mapper: multipath round-robin: version 1.0.0 loaded
- <6>[ 1.047506] device-mapper: multipath queue-length: version 0.1.0 loaded
- <6>[ 1.047534] device-mapper: multipath service-time: version 0.2.0 loaded
- <6>[ 1.047841] Bluetooth: HCI UART driver ver 2.2
- <6>[ 1.047859] Bluetooth: HCI H4 protocol initialized
- <6>[ 1.047873] Bluetooth: HCI BCSP protocol initialized
- <7>[ 1.047888] bluetooth_power_init
- <7>[ 1.047971] bt_power_probe
- <6>[ 1.048248] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- <4>[ 1.049158] pc_clk_set_rate id : 19, rate : 144000
- <4>[ 1.049218] pc_clk_set_rate id : 0, rate : 144000
- <4>[ 1.049228] , rc : 0
- <6>[ 1.049678] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
- <6>[ 1.049696] mmc0: 8 bit data mode disabled
- <6>[ 1.049709] mmc0: 4 bit data mode enabled
- <6>[ 1.049723] mmc0: polling status mode disabled
- <6>[ 1.049741] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- <6>[ 1.049758] mmc0: Slot eject status = 0
- <6>[ 1.049771] mmc0: Power save feature enable = 1
- <6>[ 1.049789] mmc0: DM non-cached buffer at ffc12000, dma_addr 0x0c56c000
- <6>[ 1.049811] mmc0: DM cmd busaddr 0x0c56c000, cmdptr busaddr 0x0c56c300
- <4>[ 1.049974] pc_clk_set_rate id : 21, rate : 144000
- <4>[ 1.050026] pc_clk_set_rate id : 0, rate : 144000
- <4>[ 1.050036] , rc : 0
- <6>[ 1.050359] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
- <6>[ 1.050378] mmc1: 8 bit data mode disabled
- <6>[ 1.050391] mmc1: 4 bit data mode enabled
- <6>[ 1.050404] mmc1: polling status mode disabled
- <6>[ 1.050421] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- <6>[ 1.050439] mmc1: Slot eject status = 1
- <6>[ 1.050451] mmc1: Power save feature enable = 1
- <6>[ 1.050469] mmc1: DM non-cached buffer at ffc13000, dma_addr 0x0c56e000
- <6>[ 1.050489] mmc1: DM cmd busaddr 0x0c56e000, cmdptr busaddr 0x0c56e300
- <6>[ 1.052049] usbcore: registered new interface driver usbhid
- <6>[ 1.052074] usbhid: v2.6:USB HID core driver
- <6>[ 1.098793] msm_hsusb msm_hsusb: suspend
- <6>[ 1.155611]
- <6>[ 1.155618] ========== kernel thread : gaf-proc ==========
- <6>[ 1.155634] task_struct at cc35d040
- <6>[ 1.155648] thread_info at cc380000
- <6>[ 1.155656]
- <6>[ 1.155666] saved_cpu_context at cc38001c
- <6>[ 1.155686] cc38001c r4 :cc35d040 r5 :cc35d1cc r6 :c0638ff8 r7 :00000000
- <6>[ 1.155709] cc38002c r8 :c064dd64 r9 :00000000 r10:c0478778 r11:cc381f04
- <6>[ 1.155731] cc38003c sp :cc381ee0 pc :c0477fdc
- <6>[ 1.155739]
- <6>[ 1.155754] searching saved pc which is stopped in schedule_timeout() from cc381ee0 to cc382000
- <6>[ 1.155776] schedule_timeout() is from c0478754 to c0478a64
- <6>[ 1.155786]
- <6>[ 1.155801] pc (c0478778) is found at cc381f00
- <6>[ 1.155821] cc381ed4 r4 :xxxxxxxx r5 :c0030e84 r6 :c00c3288 r7 :7fffffff
- <6>[ 1.155843] cc381ee4 r8 :cc35d040 r9 :c047995c r10:00000000 r11:00000000
- <6>[ 1.155866] cc381ef4 r12:00000000 sp :cc381f64 lr :cc381f08 pc :c0478778
- <6>[ 1.155883] ===================
- <6>[ 1.155889]
- <6>[ 1.156088] logger: created 512K log 'log_main'
- <6>[ 1.156231] logger: created 256K log 'log_events'
- <6>[ 1.156373] logger: created 256K log 'log_radio'
- <6>[ 1.156508] logger: created 64K log 'log_system'
- <3>[ 1.156883] i2c i2c-2: sendbytes: NAK bailout.
- <3>[ 1.156921] synaptics_rmi4_i2c 2-002c: synaptics_rmi4_set_page:failed:-5
- <3>[ 1.156943] synaptics_rmi4_i2c 2-002c: synaptics_rmi4_i2c_query_device: read error
- <3>[ 1.156964] synaptics_rmi4_i2c 2-002c: synaptics_rmi4_probe: rmi4 query device failed
- <4>[ 1.157008] synaptics_rmi4_i2c: probe of 2-002c failed with error -5
- <4>[ 1.158618] [Silent Value] : 0
- <6>[ 1.158856] Advanced Linux Sound Architecture Driver Version 1.0.21.
- <4>[ 1.159326] No device for DAI CODEC_DAI
- <4>[ 1.159344] No device for DAI CPU_DAI
- <3>[ 1.159564] msm_soc: create pcms
- <6>[ 1.159888] asoc: CODEC_DAI <-> CPU_DAI mapping ok
- <3>[ 1.159904] msm_soc: ALSA MSM Mixer Setting
- <6>[ 1.160648] ALSA device list:
- <6>[ 1.160664] #0: msm-audio (MSM-CARD)
- <4>[ 1.160788] Netfilter messages via NETLINK v0.30.
- <4>[ 1.160896] nf_conntrack version 0.5.0 (2949 buckets, 11796 max)
- <4>[ 1.161181] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 1.161201] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 1.161219] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <6>[ 1.161463] xt_time: kernel timezone is -0000
- <6>[ 1.161531] IPv4 over IPv4 tunneling driver
- <6>[ 1.162413] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.162618] TCP cubic registered
- <6>[ 1.162978] NET: Registered protocol family 10
- <6>[ 1.164653] IPv6 over IPv4 tunneling driver
- <6>[ 1.165443] NET: Registered protocol family 17
- <6>[ 1.165499] Bluetooth: L2CAP ver 2.14
- <6>[ 1.165511] Bluetooth: L2CAP socket layer initialized
- <6>[ 1.165536] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 1.165551] Bluetooth: SCO socket layer initialized
- <6>[ 1.166913] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 1.166939] Bluetooth: RFCOMM socket layer initialized
- <6>[ 1.166956] Bluetooth: RFCOMM ver 1.11
- <6>[ 1.166973] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 1.166988] Bluetooth: BNEP filters: protocol multicast
- <6>[ 1.167004] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 1.167639] clock_late_init() disabled 16 unused clocks
- <6>[ 1.168326] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- <6>[ 1.180748] [drm] Initialized kgsl 2.1.1 20100127 on minor 0
- <7>[ 1.183524] msmrtc_tod_proc_result: 04/04/2011 02:21:37 (00)
- <6>[ 1.183574] rs30000048 rs30000048.65536: setting system clock to 2011-04-04 02:21:37 UTC (1301883697)
- <6>[ 1.183601] msm_v4l2: msm_v4l2_init
- <4>[ 1.184269] multipdp_init:multipdp_rx_noti_regi calling
- <6>[ 1.184554] Freeing init memory: 160K
- <4>[ 1.184616] Warning: unable to open an initial console.
- <6>[ 1.200914] msm_hsusb msm_hsusb: reset
- <6>[ 1.203198] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
- <4>[ 1.294843] pdp_activate(): ttyCSD(id: 1) serial device is created.
- <4>[ 1.295119] pdp_activate(): ttyEFS(id: 8) serial device is created.
- <4>[ 1.295366] pdp_activate(): ttyGPS(id: 5) serial device is created.
- <4>[ 1.295669] pdp_activate(): ttyXTRA(id: 6) serial device is created.
- <4>[ 1.295896] pdp_activate(): ttySMD(id: 25) serial device is created.
- <6>[ 1.305091] msm_hsusb msm_hsusb: reset
- <6>[ 1.307378] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
- <4>[ 1.321898] fsr: module license 'Samsung Proprietary' taints kernel.
- <4>[ 1.321931] Disabling lock debugging due to kernel taint
- <4>[ 1.371956] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
- <4>[ 1.371986] [PAM:aaaaaaaa ] ++FSR_PAM_Init
- <4>[ 1.372049] [PAM: ] --FSR_PAM_Init
- <4>[ 1.372219] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 1.372381] [OND:INF] FSR_OND_4K_Open(nDev:0, pParam:0xcd4c3e18, nFlag:0x00000000) / 1095 line
- <4>[ 1.372406] pstOND4kCxt->nBaseAddr: 0x00000000
- <4>[ 1.372431] nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x013e
- <4>[ 1.372456] [OND:INF] pstOND4kCxt->nSysConf1:0xc0e2 / 1178 line
- <4>[ 1.372478] [OND:INF] pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1195 line
- <4>[ 1.372514] [OND:INF] pstOND4kCxt->nIntID :0x0000 / 1298 line
- <4>[ 1.372533] [OND:INF] 1X_CACHEPGM CMD : 0x007f
- <4>[ 1.372549] [OND:INF] 1X_PLOAD CMD : 0x0003
- <4>[ 1.373079] [BBM:INF] Scan from 2004 to 2047 to find BML meta blocks (die: 0)
- <4>[ 1.373544] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 1.377261] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 1.380928] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 1.384596] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 1.388384] [BBM:INF] a5a5 a5a5 ffff
- <6>[ 1.418783] android_usb gadget: high speed config #1: android
- <4>[ 1.456438] [BBM: ] << DevNO:0, DieNO: 0 MAPPING INFORMATION >>
- <4>[ 1.456458] [BBM: ] Bad Mark Information
- <4>[ 1.456474] [BBM: ] - Bad Mark (0x2222) by erase error
- <4>[ 1.456493] [BBM: ] - Bad Mark (0x4444) by write error
- <4>[ 1.456889] [BBM: ] 0000: Sbn[ 186]==>Rbn[ 2042] / BadMark: 0x0000 / SLC / Lock: UL
- <4>[ 1.457278] [BBM: ] 0001: Sbn[ 187]==>Rbn[ 2041] / BadMark: 0x0000 / SLC / Lock: UL
- <4>[ 1.457663] [BBM: ] 0002: Sbn[ 1310]==>Rbn[ 2040] / BadMark: 0x0000 / SLC / Lock: UL
- <4>[ 1.458048] [BBM: ] 0003: Sbn[ 1312]==>Rbn[ 2039] / BadMark: 0x0000 / SLC / Lock: UL
- <4>[ 1.458074] [BBM: ] << Total : 4 BAD-MAPPING INFORMATION >>
- <4>[ 1.458094] [BIF: ] nPartition Information (nVol : 0)
- <4>[ 1.458111] nVer : 0x10000
- <4>[ 1.458131] 00 / nID:0x01 / nAttr:0x00001012 / 1stVun: 0 / Units: 6
- <4>[ 1.458158] 01 / nID:0x02 / nAttr:0x00001012 / 1stVun: 6 / Units: 2
- <4>[ 1.458186] 02 / nID:0x03 / nAttr:0x00001012 / 1stVun: 8 / Units: 3
- <4>[ 1.458213] 03 / nID:0x04 / nAttr:0x00001012 / 1stVun: 11 / Units: 100
- <4>[ 1.458239] 04 / nID:0x23 / nAttr:0x00001101 / 1stVun: 111 / Units: 97
- <4>[ 1.458266] 05 / nID:0x25 / nAttr:0x00001101 / 1stVun: 208 / Units: 20
- <4>[ 1.458293] 06 / nID:0x05 / nAttr:0x00001001 / 1stVun: 228 / Units: 100
- <4>[ 1.458319] 07 / nID:0x06 / nAttr:0x00001012 / 1stVun: 328 / Units: 8
- <4>[ 1.458346] 08 / nID:0x07 / nAttr:0x00001012 / 1stVun: 336 / Units: 40
- <4>[ 1.458373] 09 / nID:0x08 / nAttr:0x00001012 / 1stVun: 376 / Units: 40
- <4>[ 1.458401] 10 / nID:0x09 / nAttr:0x00001012 / 1stVun: 416 / Units: 3
- <4>[ 1.458428] 11 / nID:0x21 / nAttr:0x00001101 / 1stVun: 419 / Units: 710
- <4>[ 1.458454] 12 / nID:0x22 / nAttr:0x00001101 / 1stVun: 1129 / Units: 775
- <4>[ 1.458481] 13 / nID:0x24 / nAttr:0x00001101 / 1stVun: 1904 / Units: 100
- <4>[ 1.458531] [BBM:INF] The registered blocks in ERL are handled
- <4>[ 1.458548] [BBM:INF] (number of blocks: 0)
- <4>[ 1.466729] BML: Registered BML Driver.
- <4>[ 1.511836] pc_clk_set_rate id : 19, rate : 49152000
- <4>[ 1.511919] pc_clk_set_rate id : 0, rate : 49152000
- <4>[ 1.511929] , rc : 0
- <4>[ 1.512093] mmc0: host does not support reading read-only switch. assuming write-enable.
- <6>[ 1.512129] mmc0: new high speed SD card at address 0002
- <6>[ 1.515736] mmcblk0: mmc0:0002 00000 1.86 GiB
- <6>[ 1.516111] mmcblk0: p1 p2 p3
- <4>[ 1.531846] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
- <4>[ 1.531878] [BIF: ] FSR_BML_Init(nFlag:0x0, nRe:FSR_BML_ALREADY_INITIALIZED) / 1034 line
- <4>[ 1.539768] FSR: Registered STL Driver.
- <4>[ 1.833436] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 1.833478] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1178 line
- <4>[ 1.833586] [SIF:INF] ===> STL Clst[ 4] Scan Root Info
- <4>[ 1.834996] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Meta
- <4>[ 1.837379] [SIF:INF] Latest Header Index ( 0) Vbn ( 2)
- <4>[ 1.840278] [SIF:INF] Latest Header Clean Page Offset ( 7)
- <4>[ 1.840299] [SIF:INF] POR write timer : 0x15
- <4>[ 1.840691] [SIF:INF] Latest Context BlockIdx ( 0) Offset ( 6) Vpn ( 134)
- <4>[ 1.841113] [SIF:INF] Number of Free Block ( 4)
- <4>[ 1.841131] [SIF:INF] Active Log List : Num ( 1)
- <4>[ 1.841153] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Post
- <4>[ 1.841519] [SIF:INF] ===> STL Zone[ 4, 0] Validity check
- <4>[ 1.841553] [SIF:INF] Partition [0, 24] open is success
- <4>[ 1.846401] [SIF:INF] Zone[ 4, 0]: nDgn( 0) nVbn( 41) S( 0)-E( 8) nCPOffs( 9)
- <6>[ 1.866223] EXT4-fs (stl14): recovery complete
- <6>[ 1.866591] EXT4-fs (stl14): mounted filesystem with ordered data mode
- <4>[ 1.866834] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 1.866863] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1178 line
- <4>[ 1.866896] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
- <4>[ 1.866974] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 1.866999] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1178 line
- <4>[ 1.867068] [SIF:INF] ===> STL Clst[ 2] Scan Root Info
- <4>[ 1.868463] [SIF:INF] ===> STL Zone[ 2, 0] Open Zone Meta
- <4>[ 1.876418] [SIF:INF] Latest Header Index ( 1) Vbn ( 212)
- <4>[ 1.883529] [SIF:INF] Latest Header Clean Page Offset ( 17)
- <4>[ 1.883549] [SIF:INF] POR write timer : 0x155
- <4>[ 1.884298] [SIF:INF] Latest Context BlockIdx ( 1) Offset ( 16) Vpn (13584)
- <4>[ 1.884718] [SIF:INF] Number of Free Block ( 2)
- <4>[ 1.884736] [SIF:INF] Active Log List : Num ( 8)
- <4>[ 1.884758] [SIF:INF] ===> STL Zone[ 2, 0] Open Zone Post
- <4>[ 1.887448] [SIF:INF] ===> STL Zone[ 2, 0] Validity check
- <4>[ 1.887481] [SIF:INF] Partition [0, 22] open is success
- <4>[ 1.891388] [SIF:INF] Zone[ 2, 0]: nDgn( 0) nVbn( 532) S( 28)-E( 34) nCPOffs( 35)
- <6>[ 2.095641]
- <6>[ 2.095651] Charger Type: STD DOWNSTREAM PORT
- <4>[ 2.125733] [SIF:INF] Zone[ 2, 0]: nDgn( 22) nVbn( 464) S( 0)-E( 3) nCPOffs( 4)
- <4>[ 2.157716] [SIF:INF] Zone[ 2, 0]: nDgn( 23) nVbn( 335) S( 0)-E( 16) nCPOffs( 17)
- <4>[ 2.241066] [SIF:INF] Zone[ 2, 0]: nDgn( 79) nVbn( 229) S( 22)-E( 23) nCPOffs( 24)
- <4>[ 2.257186] [SIF:INF] Zone[ 2, 0]: nDgn( 6) nVbn( 459) S( 20)-E( 21) nCPOffs( 22)
- <4>[ 2.288543] [SIF:INF] Zone[ 2, 0]: nDgn( 76) nVbn( 626) S( 17)-E( 18) nCPOffs( 19)
- <4>[ 2.303471] [SIF:INF] Zone[ 2, 0]: nDgn( 527) nVbn( 527) S( 11)-E( 22) nCPOffs( 23)
- <4>[ 2.344838] [SIF:INF] Zone[ 2, 0]: nDgn( 552) nVbn( 117) S( 8)-E( 8) nCPOffs( 9)
- <6>[ 2.347706] EXT4-fs (stl13): recovery complete
- <6>[ 2.348061] EXT4-fs (stl13): mounted filesystem with ordered data mode
- <4>[ 2.348313] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 2.348339] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:4) / 1178 line
- <4>[ 2.348376] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 3)
- <4>[ 2.348596] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 2.348623] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:4) / 1178 line
- <4>[ 2.348698] [SIF:INF] ===> STL Clst[ 1] Scan Root Info
- <4>[ 2.350146] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Meta
- <4>[ 2.357259] [SIF:INF] Latest Header Index ( 1) Vbn ( 3)
- <4>[ 2.361451] [SIF:INF] Latest Header Clean Page Offset ( 10)
- <4>[ 2.361473] [SIF:INF] POR write timer : 0x8
- <4>[ 2.362224] [SIF:INF] Latest Context BlockIdx ( 1) Offset ( 9) Vpn ( 201)
- <4>[ 2.362648] [SIF:INF] Number of Free Block ( 2)
- <4>[ 2.362666] [SIF:INF] Active Log List : Num ( 8)
- <4>[ 2.362688] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Post
- <4>[ 2.365358] [SIF:INF] ===> STL Zone[ 1, 0] Validity check
- <4>[ 2.365394] [SIF:INF] Partition [0, 21] open is success
- <4>[ 2.370151] [SIF:INF] Zone[ 1, 0]: nDgn( 0) nVbn( 537) S( 0)-E( 8) nCPOffs( 9)
- <4>[ 2.380189] [SIF:INF] Zone[ 1, 0]: nDgn( 1) nVbn( 528) S( 0)-E( 0) nCPOffs( 1)
- <6>[ 2.386593] EXT4-fs (stl12): mounted filesystem with ordered data mode
- <4>[ 2.386808] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 2.386834] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:5) / 1178 line
- <4>[ 2.386869] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 4)
- <4>[ 2.421268] [SIF:INF] Zone[ 1, 0]: nDgn( 235) nVbn( 17) S( 0)-E( 0) nCPOffs( 1)
- <3>[ 2.506874] init: service 'console' requires console
- <4>[ 2.798531] wlan_setup_power on --enter
- <4>[ 2.798578] wlan_setup_clock on --enter
- <6>[ 2.839013] WLAN: wake lock timeout 0.5 sec...
- <6>[ 2.938436] SMD: ch 39 0 -> 1
- <6>[ 2.938551] SMD: ch 39 1 -> 2
- <6>[ 2.938761] SMD: ch 40 0 -> 1
- <6>[ 2.938886] SMD: ch 40 1 -> 2
- <6>[ 2.939068] SMD: ch 41 0 -> 1
- <6>[ 2.939168] SMD: ch 41 1 -> 2
- <6>[ 2.943001] mmc1: Slot status change detected (0 -> 1)
- <6>[ 2.976651] acmdata_register
- <6>[ 2.976674] diag_function_add
- <6>[ 2.976698] mass_storage_function_add
- <6>[ 2.980104] android_usb gadget: Number of LUNs=1
- <6>[ 2.980134] android_usb gadget: adb_function_add
- <6>[ 2.980213] android_usb gadget: android_usb ready
- <6>[ 2.980258] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
- <6>[ 2.980323] msm_hsusb msm_hsusb: msm72k_udc: IDLE -> ONLINE
- <6>[ 3.105484] msm_hsusb msm_hsusb: suspend
- <7>[ 3.121101] mmc1: queuing CIS tuple 0x01 length 3
- <7>[ 3.139704] mmc1: queuing CIS tuple 0x1a length 5
- <7>[ 3.147811] mmc1: queuing CIS tuple 0x1b length 8
- <7>[ 3.149448] mmc1: queuing CIS tuple 0x14 length 0
- <4>[ 3.151953] pc_clk_set_rate id : 21, rate : 49152000
- <4>[ 3.152031] pc_clk_set_rate id : 0, rate : 49152000
- <4>[ 3.152039] , rc : 0
- <7>[ 3.153133] mmc1: queuing CIS tuple 0x80 length 1
- <7>[ 3.153196] mmc1: queuing CIS tuple 0x81 length 1
- <7>[ 3.153259] mmc1: queuing CIS tuple 0x82 length 1
- <6>[ 3.153304] mmc1: new high speed SDIO card at address 0001
- <1>[ 3.162653] AR6000: Unsupported configuration opcode: 3
- <1>[ 3.163813] AR6000: Unsupported configuration opcode: 3
- <1>[ 3.163829] HIF Interrupt processing is SYNC ONLY
- <1>[ 3.163844] AR6000: Unsupported configuration opcode: 7
- <1>[ 3.163859] AR6000: Unsupported configuration opcode: 5
- <1>[ 3.166108] In aggr_init..
- <1>[ 3.166266] going out of aggr_init..status OK
- <1>[ 3.167343] AR6K: Temporary WAR to avoid SDIO CRC error
- <6>[ 3.207856] msm_hsusb msm_hsusb: reset
- <6>[ 3.210138] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
- <6>[ 3.312339] msm_hsusb msm_hsusb: reset
- <6>[ 3.314606] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
- <4>[ 3.344364] MAC from EEPROM 00:03:7F:03:E0:0C
- <4>[ 3.345369] MAC from softmac file BC:47:60:59:28:F9
- <6>[ 3.360888] bma_open
- <6>[ 3.360913] BMA Accel has been opened
- <4>[ 3.360963] [bma_ioctl] Get Sensor Type = 1
- <6>[ 3.425583] android_usb gadget: high speed config #1: android
- <4>[ 3.425631] acm_disconnected
- <7>[ 3.425803] diag: USB connected
- <3>[ 3.427771] msm_hsusb_send_serial_number: rpc call failed! error: -22
- <6>[ 3.458024] warning: `drexe' uses 32-bit capabilities (legacy support in use)
- <6>[ 3.478401] SMD: ch 0 0 -> 1
- <6>[ 3.478624] SMD: ch 0 1 -> 2
- <1>[ 3.733444] ar6000_init() Got WMI @ 0xcbf8b800.
- <1>[ 3.752568] Target Ready: credits: 30 credit size: 1664
- <1>[ 3.752596] AR6K: ** HIF layer does not support scatter requests (17)
- <1>[ 3.752653] AR6K: virtual scatter transfers enabled (max scatter items:16: maxlen:16384)
- <1>[ 3.752674] AR6K: max recv: 16384 max send: 12288
- <1>[ 3.769294] ar6000_init() WMI is ready
- <1>[ 3.769714] wmi_control_rx() : Unknown id 0x101e
- <1>[ 3.769954] AR6000 Reg Code = 0x8
- <6>[ 4.102333]
- <6>[ 4.102348] Charger Type: STD DOWNSTREAM PORT
- <4>[ 4.496256] acm_connected
- <3>[ 4.759438] [Battery] get_charger_type charger_type is (2)
- <4>[ 4.759466] [Battery] get_charger_type : wake_lock!!! !!!!
- <4>[ 4.759734] [Battery] get_charging_status : event_flag =8
- <4>[ 4.759963] [DPRAM:cmd_chg_detect_noti] changed irq: 0x82 detected.
- <4>[ 5.218646] [SIF:INF] Zone[ 1, 0]: nDgn( 447) nVbn( 530) S( 0)-E( 0) nCPOffs( 1)
- <6>[ 5.506061] [snd.c:snd_ioctl] snd_avc_ctl 1
- <6>[ 5.506913] [snd.c:snd_ioctl] snd_agc_ctl 1
- <3>[ 5.507714] [snd.c:snd_ioctl] snd_set_extamp 2 0 31
- <3>[ 5.515566] [snd.c:snd_ioctl] snd_set_volume 0 0 7
- <3>[ 5.516208] [snd.c:snd_ioctl] snd_set_volume 6 0 7
- <3>[ 5.516806] [snd.c:snd_ioctl] snd_set_volume 12 0 7
- <3>[ 5.517436] [snd.c:snd_ioctl] snd_set_volume 3 0 7
- <3>[ 5.518428] [snd.c:snd_ioctl] snd_set_volume 16 0 7
- <3>[ 5.522383] [snd.c:snd_ioctl] snd_set_volume 17 0 7
- <3>[ 5.523029] [snd.c:snd_ioctl] snd_set_volume 25 0 7
- <3>[ 5.523603] [snd.c:snd_ioctl] snd_set_volume 30 0 7
- <3>[ 5.524248] [snd.c:snd_ioctl] snd_set_volume 31 0 7
- <3>[ 5.532926] [snd.c:snd_ioctl] snd_set_extamp 30 26 0
- <3>[ 5.533548] [snd.c:snd_ioctl] snd_set_device 30 1 1
- <3>[ 5.534508] [snd.c:snd_ioctl] snd_set_volume 34 0 7
- <6>[ 6.811289] EXT4-fs (mmcblk0p2): recovery complete
- <6>[ 6.811333] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
- <4>[ 7.370719] JBD: barrier-based sync failed on stl13-8 - disabling barriers
- <6>[ 7.915713] Adding 266104k swap on /dev/block/mmcblk0p3. Priority:-1 extents:1 across:266104k SS
- <4>[ 8.356613] JBD: barrier-based sync failed on stl14-8 - disabling barriers
- <6>[ 9.257496] MDP: unknown ioctl (cmd=1075070673) received!
- <6>[ 9.430848] MDP: unknown ioctl (cmd=18121) received!
- <1>[ 13.615733] WLAN PWR set to DISABLED~
- <1>[ 13.615771] ar6000_setup_cut_power_state: Cut power 0 0
- <1>[ 13.615789] Wlan OFF 1 BT OFf 1
- <1>[ 13.621493] AR6000: reseting SDIO card back to uninitialized state
- <4>[ 13.621829] wlan_setup_power down --enter
- <1>[ 13.722341] SENT WLAN Sleep Event 0
- <6>[ 14.066181] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
- <6>[ 14.066348] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw
- <6>[ 14.071406] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw
- <3>[ 14.072801] init: untracked pid 232 exited
- <3>[ 14.075943] init: untracked pid 233 exited
- <4>[ 14.670799] !@beginofPackageManager
- <4>[ 22.878801] !@2ndofPackageManager
- <3>[ 23.645779] [snd.c:snd_ioctl] snd_set_volume 34 0 6
- <1>[ 23.734814] WLAN PWR set to ENABLE^^
- <1>[ 23.734854] ar6000_setup_cut_power_state: Cut power 1 1
- <1>[ 23.734871] Wlan OFF 0 BT OFf 1
- <4>[ 23.734884] wlan_setup_power on --enter
- <4>[ 23.734918] wlan_setup_clock on --enter
- <4>[ 23.876126] pc_clk_set_rate id : 21, rate : 144000
- <4>[ 23.876198] pc_clk_set_rate id : 0, rate : 144000
- <4>[ 23.876206] , rc : 0
- <4>[ 23.913123] pc_clk_set_rate id : 21, rate : 49152000
- <4>[ 23.913209] pc_clk_set_rate id : 0, rate : 49152000
- <4>[ 23.913219] , rc : 0
- <1>[ 23.922539] ar6000_power_change_ev: power change event callback 0
- <1>[ 23.922873] AR6000: Unsupported configuration opcode: 3
- <1>[ 23.926998] AR6K: Temporary WAR to avoid SDIO CRC error
- <4>[ 23.928046] MAC from EEPROM 00:03:7F:03:E0:0C
- <4>[ 23.928179] MAC from softmac file BC:47:60:59:28:F9
- <6>[ 24.035956] request_suspend_state: wakeup (3->0) at 24033658255 (2011-04-04 02:22:00.352360092 UTC)
- <4>[ 24.039758] s6d04m0 lcdc_s6d04m0_set_backlight:137,17
- <1>[ 24.240334] ar6000_init() Got WMI @ 0xcbf8b800.
- <1>[ 24.265849] Target Ready: credits: 30 credit size: 1664
- <1>[ 24.265879] AR6K: ** HIF layer does not support scatter requests (17)
- <1>[ 24.265944] AR6K: virtual scatter transfers enabled (max scatter items:16: maxlen:16384)
- <1>[ 24.265968] AR6K: max recv: 16384 max send: 12288
- <1>[ 24.289694] ar6000_init() WMI is ready
- <1>[ 24.289861] wmi_control_rx() : Unknown id 0x101e
- <1>[ 24.290104] AR6000 Reg Code = 0x8
- <1>[ 24.290581] SENT WLAN Sleep Event 1
- <6>[ 24.345298] ADDRCONF(NETDEV_UP): wlan0: link is not ready
- <1>[ 24.973386] AR6000 scan complete: 0
- <1>[ 24.974394] channel hint set to 2462
- <1>[ 25.010498] AR6000 connected event on freq 2462
- <1>[ 25.010538] with bssid 00:21:29:b6:4c:73 listenInterval=4, beaconInterval = 75, beaconIeLen = 0 assocReqLen=39 assocRespLen =59
- <1>[ 25.010561] Network: Infrastructure
- <6>[ 25.011123] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- <4>[ 25.753414] !@2ndofActivityManagersystemReady()
- <1>[ 26.905566] AR6000 Neighbor Report Event
- <1>[ 26.905648] bssid 00:21:29:b6:4c:73
- <1>[ 26.905659]
- <4>[ 31.931426] !@bootcomplete
- <6>[ 32.069746] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
- <6>[ 32.070026] CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
- <4>[ 34.955248] PARAM booting_now : 0
- <4>[ 34.955273] PARAM fota_mode : 0
- <4>[ 34.955286] PARAM efs_info : ԯ
- <4>[ 34.956741] PARAM booting_now : 0
- <4>[ 34.956758] PARAM fota_mode : 0
- <4>[ 34.956769] PARAM efs_info : ԯ
- <7>[ 35.015651] wlan0: no IPv6 routers present
- <7>[ 35.321941] msmrtc_timeremote_set_time: 03/04/2011 02:22:13 (01)
- <6>[ 35.323459] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 35.323471] tick = 1374871
- <6>[ 35.323478] stamp = 51690549714878464
- <7>[ 35.361589] msmrtc_tod_proc_result: 04/04/2011 02:22:13 (00)
- <6>[ 35.361649] rs30000048 rs30000048.65536: setting system clock to 2011-04-04 02:22:13 UTC (1301883733)
- <4>[ 45.145699] adjusting value: 9
- <4>[ 45.146853] pdp_activate(): pdp0(id: 10) network device created
- <4>[ 45.513166] [DP] do drop_caches
- <1>[ 48.179346] AR6000 Neighbor Report Event
- <1>[ 48.179386] bssid 00:21:29:b6:4c:73
- <1>[ 48.179398]
- <1>[ 48.179846] AR6000 scan complete: 0
- <4>[ 49.450523] pdp_deactivate(): id: 1
- <4>[ 49.450554] pdp_deactivate(): Channel ID is 1, we will remove the network device (pdp) of channel ID: 10.
- <4>[ 49.450581] pdp_deactivate(): ID is adjusted, new ID: 10
- <4>[ 49.450604] pdp_deactivate(): pdp0(id: 10) network device removed
- <4>[ 55.183573] s6d04m0 lcdc_s6d04m0_set_backlight:130,17
- <4>[ 55.183931] s6d04m0 lcdc_s6d04m0_set_backlight:124,16
- <4>[ 55.200323] s6d04m0 lcdc_s6d04m0_set_backlight:118,15
- <4>[ 55.215804] s6d04m0 lcdc_s6d04m0_set_backlight:112,15
- <4>[ 55.232653] s6d04m0 lcdc_s6d04m0_set_backlight:106,14
- <4>[ 55.249176] s6d04m0 lcdc_s6d04m0_set_backlight:100,14
- <4>[ 55.264663] s6d04m0 lcdc_s6d04m0_set_backlight:93,13
- <4>[ 55.281114] s6d04m0 lcdc_s6d04m0_set_backlight:87,12
- <4>[ 55.297524] s6d04m0 lcdc_s6d04m0_set_backlight:81,12
- <4>[ 55.315754] s6d04m0 lcdc_s6d04m0_set_backlight:75,11
- <4>[ 55.332233] s6d04m0 lcdc_s6d04m0_set_backlight:69,10
- <4>[ 55.347719] s6d04m0 lcdc_s6d04m0_set_backlight:63,10
- <4>[ 55.366139] s6d04m0 lcdc_s6d04m0_set_backlight:56,9
- <4>[ 55.381756] s6d04m0 lcdc_s6d04m0_set_backlight:50,9
- <4>[ 55.398228] s6d04m0 lcdc_s6d04m0_set_backlight:44,8
- <4>[ 55.413693] s6d04m0 lcdc_s6d04m0_set_backlight:38,7
- <4>[ 55.430716] s6d04m0 lcdc_s6d04m0_set_backlight:32,7
- <4>[ 55.447183] s6d04m0 lcdc_s6d04m0_set_backlight:26,4
- <4>[ 55.462661] s6d04m0 lcdc_s6d04m0_set_backlight:20,4
- <4>[ 57.168118] s6d04m0 lcdc_s6d04m0_set_backlight:27,4
- <4>[ 57.186653] s6d04m0 lcdc_s6d04m0_set_backlight:35,7
- <4>[ 57.194831] s6d04m0 lcdc_s6d04m0_set_backlight:29,4
- <4>[ 57.211254] s6d04m0 lcdc_s6d04m0_set_backlight:23,4
- <4>[ 57.226691] s6d04m0 lcdc_s6d04m0_set_backlight:20,4
- <4>[ 57.646189] s6d04m0 lcdc_s6d04m0_set_backlight:27,4
- <4>[ 57.661658] s6d04m0 lcdc_s6d04m0_set_backlight:35,7
- <4>[ 57.664726] s6d04m0 lcdc_s6d04m0_set_backlight:29,4
- <4>[ 57.667131] s6d04m0 lcdc_s6d04m0_set_backlight:37,7
- <4>[ 57.682949] s6d04m0 lcdc_s6d04m0_set_backlight:45,8
- <4>[ 57.700238] s6d04m0 lcdc_s6d04m0_set_backlight:52,9
- <4>[ 57.715819] s6d04m0 lcdc_s6d04m0_set_backlight:60,10
- <4>[ 57.735908] s6d04m0 lcdc_s6d04m0_set_backlight:68,10
- <4>[ 57.752454] s6d04m0 lcdc_s6d04m0_set_backlight:76,11
- <4>[ 57.769259] s6d04m0 lcdc_s6d04m0_set_backlight:84,12
- <4>[ 57.786194] s6d04m0 lcdc_s6d04m0_set_backlight:91,13
- <4>[ 57.801959] s6d04m0 lcdc_s6d04m0_set_backlight:99,14
- <4>[ 57.818668] s6d04m0 lcdc_s6d04m0_set_backlight:107,14
- <4>[ 57.836399] s6d04m0 lcdc_s6d04m0_set_backlight:115,15
- <4>[ 57.852453] s6d04m0 lcdc_s6d04m0_set_backlight:123,16
- <4>[ 57.868259] s6d04m0 lcdc_s6d04m0_set_backlight:130,17
- <4>[ 57.884571] s6d04m0 lcdc_s6d04m0_set_backlight:137,17
- <1>[ 88.037496] AR6000 Neighbor Report Event
- <1>[ 88.037531] bssid 00:21:29:b6:4c:73
- <1>[ 88.037544]
- <1>[ 149.246666] AR6000 Neighbor Report Event
- <1>[ 149.246738] bssid 00:21:29:b6:4c:73
- <1>[ 149.246764]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement