boot2

Willkommen zu minicom 2.7.1

Optionen: I18n
Übersetzt am May  6 2018, 08:02:47.
Port /dev/ttyUSB0, 11:22:32

Drücken Sie CTRL-A  Z für Hilfe zu speziellen Tasten
�
U-Boot TPL 2020.01-ayufan-2012-g2b7b7f74 (Apr 10 2020 - 09:36:29)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS=1 Die BW=16 Size=1024MB
256B stride
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...

U-Boot SPL 2020.01-ayufan-2012-g2b7b7f74 (Apr 10 2020 - 09:36:29 +0000)
Trying to boot from SPI


U-Boot 2020.01-ayufan-2012-g2b7b7f74 (Apr 10 2020 - 09:36:37 +0000)

Model: Pine64 RockPro64
DRAM:  2 GiB
PMIC:  RK808
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... Card did not respond to voltage select!
*** Warning - No block device, using default environment

In:    serial
Out:   vidconsole
Err:   vidconsole
Model: Pine64 RockPro64
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:   eth0: ethernet@fe300000
Hit any key to stop autoboot:  0
Card did not respond to voltage select!
Card did not respond to voltage select!

Device 0: unknown device
scanning bus for devices...
controller reset failed (0x1)
Target spinup took 0 ms.
Target spinup took 0 ms.
Target spinup took 0 ms.
Target spinup took 0 ms.
Target spinup took 0 ms.
Target spinup took 0 ms.
Target spinup took 0 ms.
Target spinup took 0 ms.
AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
flags: 64bit ncq pio
No Link on this port!
Can not start port 2
No Link on this port!
Can not start port 3
No Link on this port!
Can not start port 4
No Link on this port!
Can not start port 5
No Link on this port!
Can not start port 6
timeout exit!