API tools faq
paste
Advertisement
Guest User

boot_log_usart3

a guest
Mar 10th, 2021
331
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 19.77 KB | None | 0 0
raw download clone embed print report
  1.  
  2. U-Boot 2020.01-stm32mp-r2 (Jan 06 2020 - 20:56:31 +0000)
  3.  
  4. CPU: STM32MP157CAC Rev.B
  5. Model: STMicroelectronics STM32MP157C-DK2 Discovery Board
  6. Board: stm32mp1 in trusted mode (st,stm32mp157c-dk2)
  7. Board: MB1272 Var2.0 Rev.C-01
  8. DRAM: 512 MiB
  9. Clocks:
  10. - MPU : 650 MHz
  11. - MCU : 208.878 MHz
  12. - AXI : 266.500 MHz
  13. - PER : 24 MHz
  14. - DDR : 533 MHz
  15. WDT: Started with servicing (32s timeout)
  16. NAND: 0 MiB
  17. MMC: STM32 SD/MMC: 0, STM32 SD/MMC: 1
  18. Loading Environment from MMC... OK
  19. In: serial
  20. Out: serial
  21. Err: serial
  22. Net: eth0: ethernet@5800a000
  23. Hit any key to stop autoboot: 0
  24. Boot over mmc0!
  25. switch to partitions #0, OK
  26. mmc0 is current device
  27. Scanning mmc 0:4...
  28. Found /mmc0_extlinux/stm32mp157c-dk2_extlinux.conf
  29. Retrieving file: /mmc0_extlinux/stm32mp157c-dk2_extlinux.conf
  30. 706 bytes read in 39 ms (17.6 KiB/s)
  31. Retrieving file: /splash.bmp
  32. 18244 bytes read in 39 ms (456.1 KiB/s)
  33. Select the boot mode
  34. 1: OpenSTLinux
  35. 2: stm32mp157c-dk2-a7-examples
  36. 3: stm32mp157c-dk2-m4-examples
  37. Enter choice: 1: OpenSTLinux
  38. Retrieving file: /uInitrd
  39. 3632201 bytes read in 193 ms (17.9 MiB/s)
  40. Retrieving file: /uImage
  41. 7343408 bytes read in 352 ms (19.9 MiB/s)
  42. append: root=PARTUUID=e91c4e10-16e6-4c0e-bd0e-77becf4a3582 rootwait rw console=ttySTM0,115200
  43. Retrieving file: /stm32mp157c-dk2.dtb
  44. 105406 bytes read in 43 ms (2.3 MiB/s)
  45. ## Booting kernel from Legacy Image at c2000000 ...
  46. Image Name: Linux-5.4.56
  47. Created: 2021-03-10 10:12:06 UTC
  48. Image Type: ARM Linux Kernel Image (uncompressed)
  49. Data Size: 7343344 Bytes = 7 MiB
  50. Load Address: c2000040
  51. Entry Point: c2000040
  52. Verifying Checksum ... OK
  53. ## Flattened Device Tree blob at c4000000
  54. Booting using the fdt blob at 0xc4000000
  55. XIP Kernel Image
  56. Loading Ramdisk to cfc89000, end cffffc49 ... OK
  57. Loading Device Tree to cfc6c000, end cfc88bbd ... OK
  58.  
  59. Starting kernel ...
  60.  
  61. [ 0.000000] Booting Linux on physical CPU 0x0
  62. [ 0.000000] Linux version 5.4.56 (mpu@linux) (gcc version 9.3.0 (GCC)) #2 SMP PREEMPT Wed Mar 10 15:39:29 IST 2021
  63. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  64. [ 0.000000] CPU: div instructions available: patching division code
  65. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  66. [ 0.000000] OF: fdt: Machine model: STMicroelectronics STM32MP157C-DK2 Discovery Board
  67. [ 0.000000] Memory policy: Data cache writealloc
  68. [ 0.000000] Reserved memory: created DMA memory pool at 0x10000000, size 0 MiB
  69. [ 0.000000] OF: reserved mem: initialized node mcuram2@10000000, compatible id shared-dma-pool
  70. [ 0.000000] Reserved memory: created DMA memory pool at 0x10040000, size 0 MiB
  71. [ 0.000000] OF: reserved mem: initialized node vdev0vring0@10040000, compatible id shared-dma-pool
  72. [ 0.000000] Reserved memory: created DMA memory pool at 0x10041000, size 0 MiB
  73. [ 0.000000] OF: reserved mem: initialized node vdev0vring1@10041000, compatible id shared-dma-pool
  74. [ 0.000000] Reserved memory: created DMA memory pool at 0x10042000, size 0 MiB
  75. [ 0.000000] OF: reserved mem: initialized node vdev0buffer@10042000, compatible id shared-dma-pool
  76. [ 0.000000] Reserved memory: created DMA memory pool at 0x30000000, size 0 MiB
  77. [ 0.000000] OF: reserved mem: initialized node mcuram@30000000, compatible id shared-dma-pool
  78. [ 0.000000] Reserved memory: created DMA memory pool at 0x38000000, size 0 MiB
  79. [ 0.000000] OF: reserved mem: initialized node retram@38000000, compatible id shared-dma-pool
  80. [ 0.000000] cma: Reserved 128 MiB at 0xd2000000
  81. [ 0.000000] psci: probing for conduit method from DT.
  82. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  83. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  84. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  85. [ 0.000000] psci: SMC Calling Convention v1.0
  86. [ 0.000000] percpu: Embedded 20 pages/cpu s50956 r8192 d22772 u81920
  87. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113536
  88. [ 0.000000] Kernel command line: root=PARTUUID=e91c4e10-16e6-4c0e-bd0e-77becf4a3582 rootwait rw console=ttySTM0,115200
  89. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  90. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  91. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  92. [ 0.000000] Memory: 301404K/458752K available (11264K kernel code, 871K rwdata, 3424K rodata, 1024K init, 214K bss, 26276K reserved, 131072K cma-reserved, 0K highmem)
  93. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  94. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  95. [ 0.000000] rcu: RCU event tracing is enabled.
  96. [ 0.000000] Tasks RCU enabled.
  97. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  98. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  99. [ 0.000000] random: get_random_bytes called from start_kernel+0x31c/0x4f4 with crng_init=0
  100. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (virt).
  101. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  102. [ 0.000009] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  103. [ 0.000027] Switching to timer-based delay loop, resolution 41ns
  104. [ 0.001938] Console: colour dummy device 80x30
  105. [ 0.001986] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  106. [ 0.002008] pid_max: default: 32768 minimum: 301
  107. [ 0.002265] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  108. [ 0.002287] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  109. [ 0.003585] CPU: Testing write buffer coherency: ok
  110. [ 0.004140] /cpus/cpu@0 missing clock-frequency property
  111. [ 0.004175] /cpus/cpu@1 missing clock-frequency property
  112. [ 0.004193] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  113. [ 0.059777] Setting up static identity map for 0xc0100000 - 0xc0100060
  114. [ 0.079748] rcu: Hierarchical SRCU implementation.
  115. [ 0.104272] smp: Bringing up secondary CPUs ...
  116. [ 0.180410] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  117. [ 0.180632] smp: Brought up 1 node, 2 CPUs
  118. [ 0.180656] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  119. [ 0.180666] CPU: All CPU(s) started in SVC mode.
  120. [ 0.181526] devtmpfs: initialized
  121. [ 0.213215] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  122. [ 0.213852] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  123. [ 0.213888] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  124. [ 0.221052] pinctrl core: initialized pinctrl subsystem
  125. [ 0.223524] NET: Registered protocol family 16
  126. [ 0.233149] DMA: preallocated 256 KiB pool for atomic coherent allocations
  127. [ 0.235422] cpuidle: using governor menu
  128. [ 0.235893] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  129. [ 0.235910] hw-breakpoint: maximum watchpoint size is 8 bytes.
  130. [ 0.236358] Serial: AMBA PL011 UART driver
  131. [ 0.239624] stm32-pm-domain pm_domain: domain core-ret-power-domain registered
  132. [ 0.239663] stm32-pm-domain pm_domain: subdomain core-power-domain registered
  133. [ 0.239679] stm32-pm-domain pm_domain: domains probed
  134. [ 0.280120] SCSI subsystem initialized
  135. [ 0.281094] usbcore: registered new interface driver usbfs
  136. [ 0.281174] usbcore: registered new interface driver hub
  137. [ 0.281328] usbcore: registered new device driver usb
  138. [ 0.281735] pps_core: LinuxPPS API ver. 1 registered
  139. [ 0.281748] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  140. [ 0.281782] PTP clock support registered
  141. [ 0.282102] EDAC MC: Ver: 3.0.0
  142. [ 0.283501] Advanced Linux Sound Architecture Driver Initialized.
  143. [ 0.285270] clocksource: Switched to clocksource arch_sys_counter
  144. [ 1.009049] thermal_sys: Registered thermal governor 'step_wise'
  145. [ 1.009699] NET: Registered protocol family 2
  146. [ 1.010817] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
  147. [ 1.010872] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
  148. [ 1.010939] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
  149. [ 1.011034] TCP: Hash tables configured (established 4096 bind 4096)
  150. [ 1.011188] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  151. [ 1.011232] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  152. [ 1.011525] NET: Registered protocol family 1
  153. [ 1.012521] RPC: Registered named UNIX socket transport module.
  154. [ 1.012541] RPC: Registered udp transport module.
  155. [ 1.012552] RPC: Registered tcp transport module.
  156. [ 1.012562] RPC: Registered tcp NFSv4.1 backchannel transport module.
  157. [ 1.012964] Trying to unpack rootfs image as initramfs...
  158. [ 1.391411] Freeing initrd memory: 3548K
  159. [ 1.392553] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  160. [ 1.394641] Initialise system trusted keyrings
  161. [ 1.395067] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  162. [ 1.407863] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  163. [ 1.409126] NFS: Registering the id_resolver key type
  164. [ 1.409184] Key type id_resolver registered
  165. [ 1.409195] Key type id_legacy registered
  166. [ 1.409420] ntfs: driver 2.1.32 [Flags: R/O].
  167. [ 1.409934] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  168. [ 1.410749] fuse: init (API version 7.31)
  169. [ 1.411867] NET: Registered protocol family 38
  170. [ 1.411888] Key type asymmetric registered
  171. [ 1.411900] Asymmetric key parser 'x509' registered
  172. [ 1.411966] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  173. [ 1.411981] io scheduler mq-deadline registered
  174. [ 1.411991] io scheduler kyber registered
  175. [ 1.423041] STM32 USART driver initialized
  176. [ 1.445653] brd: module loaded
  177. [ 1.460453] loop: module loaded
  178. [ 1.466367] libphy: Fixed MDIO Bus: probed
  179. [ 1.468283] CAN device driver interface
  180. [ 1.470543] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  181. [ 1.470630] usbcore: registered new interface driver pegasus
  182. [ 1.470728] usbcore: registered new interface driver asix
  183. [ 1.470788] usbcore: registered new interface driver ax88179_178a
  184. [ 1.470858] usbcore: registered new interface driver cdc_ether
  185. [ 1.470934] usbcore: registered new interface driver smsc75xx
  186. [ 1.471008] usbcore: registered new interface driver smsc95xx
  187. [ 1.471065] usbcore: registered new interface driver net1080
  188. [ 1.471132] usbcore: registered new interface driver cdc_subset
  189. [ 1.471191] usbcore: registered new interface driver zaurus
  190. [ 1.471279] usbcore: registered new interface driver cdc_ncm
  191. [ 1.472715] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  192. [ 1.472768] ehci-platform: EHCI generic platform driver
  193. [ 1.473247] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  194. [ 1.473287] ohci-platform: OHCI generic platform driver
  195. [ 1.474065] usbcore: registered new interface driver cdc_acm
  196. [ 1.474077] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  197. [ 1.474166] usbcore: registered new interface driver usb-storage
  198. [ 1.478919] i2c /dev entries driver
  199. [ 1.483484] stm32-cpufreq stm32-cpufreq: Failed to get chip info: -517
  200. [ 1.488204] sdhci: Secure Digital Host Controller Interface driver
  201. [ 1.488222] sdhci: Copyright(c) Pierre Ossman
  202. [ 1.488232] Synopsys Designware Multimedia Card Interface Driver
  203. [ 1.488780] sdhci-pltfm: SDHCI platform and OF driver helper
  204. [ 1.489976] ledtrig-cpu: registered to indicate activity on CPUs
  205. [ 1.493225] usbcore: registered new interface driver usbhid
  206. [ 1.493243] usbhid: USB HID core driver
  207. [ 1.493570] arm-smc-mbox mailbox-0: ARM SMC mailbox enabled.
  208. [ 1.493699] arm-smc-mbox mailbox-1: ARM SMC mailbox enabled.
  209. [ 1.495510] remoteproc remoteproc0: releasing m4
  210. [ 1.498691] Unable to get STM32 DDR PMU clock
  211. [ 1.504429] drop_monitor: Initializing network drop monitor service
  212. [ 1.504783] NET: Registered protocol family 17
  213. [ 1.504817] can: controller area network core (rev 20170425 abi 9)
  214. [ 1.504941] NET: Registered protocol family 29
  215. [ 1.504958] can: raw protocol (rev 20170425)
  216. [ 1.504969] can: broadcast manager protocol (rev 20170425 t)
  217. [ 1.504988] can: netlink gateway (rev 20190810) max_hops=1
  218. [ 1.505926] Key type dns_resolver registered
  219. [ 1.506112] ThumbEE CPU extension supported.
  220. [ 1.506141] Registering SWP/SWPB emulation handler
  221. [ 1.506613] registered taskstats version 1
  222. [ 1.506628] Loading compiled-in X.509 certificates
  223. [ 1.528663] Loaded X.509 cert 'Build time autogenerated kernel key: 3de80c470c535a8d51d1a67508b7524d6e6739d8'
  224. [ 1.554906] arm-scmi firmware:scmi-0: SCMI Protocol v2.0 'ST:' Firmware version 0x0
  225. [ 1.561030] remoteproc remoteproc0: releasing m4
  226. [ 1.562004] Unable to get STM32 DDR PMU clock
  227. [ 1.594851] stm32-cryp 54001000.cryp: will run requests pump with realtime priority
  228. [ 1.596473] stm32-cryp 54001000.cryp: Initialized
  229. [ 1.598881] remoteproc remoteproc0: releasing m4
  230. [ 1.599856] Unable to get STM32 DDR PMU clock
  231. [ 1.640302] stm32-mdma 58000000.dma: STM32 MDMA driver registered
  232. [ 1.643642] stm32-dma 48000000.dma: STM32 DMA driver registered
  233. [ 1.645987] stm32-dma 48001000.dma: STM32 DMA driver registered
  234. [ 1.665688] stm_thermal 50028000.thermal: stm_thermal_probe: Driver initialized successfully
  235. [ 1.672106] stm32-crc32 58009000.crc: Initialized
  236. [ 1.673668] random: fast init done
  237. [ 1.673869] stm32-hash 54002000.hash: will run requests pump with realtime priority
  238. [ 1.676219] stm32-hash 54002000.hash: Init HASH done HW ver 23 DMA mode 1
  239. [ 1.678261] random: crng init done
  240. [ 1.688904] remoteproc remoteproc0: releasing m4
  241. [ 1.690217] stm32-ddr-pmu: probed (ID=0x00140061 VER=0x00000010), DDR@533MHz
  242. [ 1.693415] /soc/interrupt-controller@5000d000: bank0
  243. [ 1.693435] /soc/interrupt-controller@5000d000: bank1
  244. [ 1.693447] /soc/interrupt-controller@5000d000: bank2
  245. [ 1.695581] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOA bank added
  246. [ 1.696072] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOB bank added
  247. [ 1.696454] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOC bank added
  248. [ 1.696802] stm32mp157-pinctrl soc:pin-controller@50002000: GPIOD bank added
  249. [ 1.697140] stm32mp157-pinctrl soc:pin-[ OK ] Started udev Coldplug all Devices.
  250. [ 12.639260] Bluetooth: Core ver 2.22
  251. [ 12.641570] NET: Registered protocol family 31
  252. [ 12.675767] Bluetooth: HCI device and connection manager initialized
  253. [ 12.680721] Bluetooth: HCI socket layer initialized
  254. [ 12.705375] Bluetooth: L2CAP socket layer initialized
  255. [ 12.709047] Bluetooth: SCO socket layer initialized
  256. [ 12.750782] Bluetooth: HCI UART driver ver 2.3
  257. [ 12.753800] Bluetooth: HCI UART protocol H4 registered
  258. [ 12.795871] Bluetooth: HCI UART protocol Broadcom registered
  259. [ 12.960422] galcore: disagrees about version of symbol module_layout
  260. [ 13.216589] Bluetooth: hci0: BCM: chip id 94
  261. [ 13.226358] Bluetooth: hci0: BCM: features 0x2e
  262. [ 13.231154] Bluetooth: hci0: BCM43430A1
  263. [ 13.233563] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
  264. [ 13.353951] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  265. [ 13.420964] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  266. [ OK ] Started Network Time Synchronization.
  267. [ 13.625750] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
  268. [ 13.806798] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0022
  269. [ 13.925914] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
  270. [ 14.025899] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Sep 11 2018 09:22:09 version 7.45.98.65 (r707797 CY) FWID 01-b54727f
  271. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  272. [ OK ] Reached target System Time Set.
  273. [ OK ] Reached target System Time Synchronized.
  274. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  275. Starting Load/Save Screen …of backlight:5a000000.dsi.0...
  276. Starting Load/Save RF Kill Switch Status...
  277. [FAILED] Failed to start Load/Save …s of backlight:5a000000.dsi.0.
  278. See 'systemctl status systemd-backlight…ht:5a000000.dsi.0.service' for details.
  279. [ OK ] Reached target System Initialization.
  280. [ OK ] Started Daily apt download activities.
  281. [ OK ] Started Daily Cleanup of Temporary Directories.
  282. [ OK ] Reached target Timers.
  283. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  284. [ OK ] Listening on D-Bus System Message Bus Socket.
  285. [ OK ] Listening on dropbear.socket.
  286. [ OK ] Reached target Sockets.
  287. [ OK ] Reached target Basic System.
  288. Starting Save/Restore Sound Card State...
  289. Starting Bluetooth service...
  290. [ OK ] Started Kernel Logging Service.
  291. [ OK ] Started System Logging Service.
  292. [ OK ] Started D-Bus System Message Bus.
  293. Starting IPv6 Packet Filtering Framework...
  294. Starting IPv4 Packet Filtering Framework...
  295. Starting Netdata, Real-time performance monitoring...
  296. Starting Login Service...
  297. [ OK ] Started TEE Supplicant.
  298. Starting Enable USB Ethernet gadget...
  299. [ OK ] Started Load/Save RF Kill Switch Status.
  300. [ OK ] Started Save/Restore Sound Card State.
  301. [ OK ] Started IPv6 Packet Filtering Framework.
  302. [ OK ] Started IPv4 Packet Filtering Framework.
  303. [ OK ] Reached target Network (Pre).
  304. [ OK ] Reached target Sound Card.
  305. Starting Network Service...
  306. [ 17.266721] using random self ethernet address
  307. [ 17.269742] using random host ethernet address
  308. [ OK ] Started Bluetooth service.
  309. [ OK ] Reached target Bluetooth.
  310. [ 17.431497] usb0: HOST MAC 0c:12:41:95:60:a4
  311. [ 17.434612] usb0: MAC c2:1c:1c:3a:ad:c1
  312. [ 17.450258] dwc2 49000000.usb-otg: bound driver configfs-gadget
  313. Starting Hostname Service...
  314. [ OK ] Started Enable USB Ethernet gadget.
  315. [ OK ] Started Network Service.
  316. Starting Network Name Resolution...
  317. [ 18.276050] stm32-dwmac 5800a000.ethernet eth0: PHY [stmmac-0:00] driver [RTL8211F Gigabit Ethernet]
  318. [ 18.333245] dwmac4: Master AXI performs any burst length
  319. [ 18.333279] stm32-dwmac 5800a000.ethernet eth0: No Safety Features support found
  320. [ 18.333302] stm32-dwmac 5800a000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  321. [ 18.370085] stm32-dwmac 5800a000.ethernet eth0: registered PTP clock
  322. [ 18.370117] stm32-dwmac 5800a000.ethernet eth0: configuring for phy/rgmii-id link mode
  323. [ OK ] Started Login Service.
  324. [ OK ] Started Netdata, Real-time performance monitoring.
  325. [ OK ] Started Hostname Service.
  326. [ OK ] Started Network Name Resolution.
  327. [ OK ] Reached target Network.
  328. [ OK ] Reached target Host and Network Name Lookups.
  329. Starting Avahi mDNS/DNS-SD Stack...
  330. [ OK ] Started IIO Daemon.
  331. [ OK ] Started Respond to IPv6 Node Information Queries.
  332. Starting Sound Service...
  333. [ OK ] Started Network Router Discovery Daemon.
  334. Starting Permit User Sessions...
  335. Starting Target Communication Framework agent...
  336. [ OK ] Started Permit User Sessions.
  337. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  338. [ OK ] Started Getty on tty1.
  339. [ OK ] Started Serial Getty on ttySTM0.
  340. [ OK ] Reached target Login Prompts.
  341. [ OK ] Started Target Communication Framework agent.
  342. [ OK ] Started Sound Service.
  343. [ OK ] Reached target Multi-User System.
  344. Starting Update UTMP about System Runlevel Changes...
  345. [ OK ] Started Update UTMP about System Runlevel Changes.
  346.  
  347. ST OpenSTLinux - Weston - (A Yocto Project Based Distro) 3.1-openstlinux-5-4-dunfell-mp1-20-11-12 stm32mp1 ttySTM0
  348.  
  349. stm32mp1 login: root (automatic login)
  350.  
  351. root@stm32mp1:~# [ 34.405350] vref:
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!