Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ;FLAVOR:Marlin
- ;TIME:5458
- ;Filament used: 3.58207m
- ;Layer height: 0.2
- ;MINX:-36.032
- ;MINY:-36.035
- ;MINZ:0.3
- ;MAXX:36.033
- ;MAXY:36.035
- ;MAXZ:90.01
- ;Generated with Cura_SteamEngine 4.2.1
- M140 S70
- M105
- M190 S70
- M104 S195
- M105
- M109 S195
- M82 ;absolute extrusion mode
- G21 ;metric values
- G90 ;absolute positioning
- M82 ;set extruder to absolute mode
- M107 ;start with the fan off
- G28 X0 Y0 ;move X/Y to min endstops
- G28 Z0 ;move Z to min endstops
- G1 Z15.0 F130 ;move the platform down 15mm
- G92 E0 ;zero the extruded length
- G1 F200 E3 ;extrude 3mm of feed stock
- G92 E0 ;zero the extruded length again
- G1 F130
- M117 Printing...
- G5
- M141 S28
- G92 E0
- G92 E0
- G1 F1500 E-6.5
- ;LAYER_COUNT:449
- ;LAYER:0
- M107
- M204 S300
- M205 X3 Y3
- G0 F3900 X26.742 Y10.106 Z0.3
- ;TYPE:SKIRT
- G1 F1500 E0
- [...]
- ;TIME_ELAPSED:5458.100364
- G1 F1500 E3575.57254
- M140 S0
- M141 S0
- M204 S1500
- M205 X11 Y11
- M107
- M104 S0 ; turn off extruder
- M140 S0 ; turn off bed
- M84 ; disable motors
- M107
- G91 ;relative positioning
- G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
- G1 Z+0.5 E-5 ;X-20 Y-20 F130 ;move Z up a bit and retract filament even more
- G28 X0 ;Y0 ;move X/Y to min endstops, so the head is out of the way
- G1 Y180 F2000
- M84 ;steppers off
- G90
- M300 P300 S4000
- M82 ;absolute extrusion mode
- M104 S0
- ;End of Gcode
- ;SETTING_3 {"extruder_quality": ["[general]\\nversion = 4\\nname = Normal #2\\nd
- ;SETTING_3 efinition = anycubic_4max\\n\\n[metadata]\\nposition = 0\\nquality_ty
- ;SETTING_3 pe = normal\\nsetting_version = 8\\ntype = quality_changes\\n\\n[valu
- ;SETTING_3 es]\\ncool_min_layer_time = 10\\ninfill_pattern = grid\\ninfill_spars
- ;SETTING_3 e_density = 5\\nmaterial_print_temperature = 195\\nskirt_line_count =
- ;SETTING_3 2\\nspeed_travel = 130\\n\\n"], "global_quality": "[general]\\nversi
- ;SETTING_3 on = 4\\nname = Normal #2\\ndefinition = anycubic_4max\\n\\n[metadata
- ;SETTING_3 ]\\nquality_type = normal\\nsetting_version = 8\\ntype = quality_chan
- ;SETTING_3 ges\\n\\n[values]\\nadhesion_type = skirt\\nmagic_spiralize = True\\n
- ;SETTING_3 material_bed_temperature_layer_0 = 70\\n\\n"}
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement