API tools faq
paste
Guest User

Untitled

a guest
Jun 17th, 2020
84
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.43 KB | None | 0 0
raw download clone embed print report
  1.  
  2. __ __ _ _
  3. | \/ | __ _ _ ____ _____| | |
  4. | |\/| |/ _` | '__\ \ / / _ \ | |
  5. | | | | (_| | | \ V / __/ | |
  6. |_| |_|\__,_|_| \_/ \___|_|_|
  7. _ _ ____ _
  8. | | | | | __ ) ___ ___ | |_
  9. | | | |___| _ \ / _ \ / _ \| __|
  10. | |_| |___| |_) | (_) | (_) | |_
  11. \___/ |____/ \___/ \___/ \__|
  12. ** MARVELL BOARD: DB6702A-GMtech LE
  13.  
  14. U-Boot 1.1.4 (May 28 2013 - 16:07:08) Marvell version: 3.6.0
  15.  
  16. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00
  17.  
  18. Soc: 88F6702 A1 CPU running @ 1000Mhz L2 running @ 500Mhz
  19. SysClock = 400Mhz , TClock = 166Mhz
  20.  
  21. DRAM (DDR2) CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
  22. DRAM CS[0] base 0x00000000 size 256MB
  23. DRAM Total size 256MB 16bit width
  24. Addresses 10M - 0M are saved for the U-Boot usage.
  25. Mem malloc Initialization (10M - 7M): Done
  26. NAND:128 MB
  27. Flash: 0 kB
  28.  
  29. CPU : Marvell Feroceon (Rev 1)
  30. Kernel address is 0xc80000.
  31.  
  32. Streaming disabled
  33. Write allocate disabled
  34.  
  35.  
  36. USB 0: host mode
  37. PEX 0: interface detected no Link.
  38. Net: egiga0 [PRIME]
  39. Hit any key to stop autoboot: 2  0
  40. Marvell>> [B  printenv
  41.  
  42. bootdelay=2
  43. baudrate=115200
  44. loads_echo=0
  45. rootpath=/srv/ubuntu
  46. nandEcc=1bit
  47. MODEL_ID=AD03
  48. PRODUCT_NAME=STG-315
  49. FEATURE_BIT=00
  50. CONTRY_TYPE=FF
  51. VENDOR_NAME=MitraStar Technology Corp.
  52. run_diag=yes
  53. ethaddr=5C:F4:AB:50:3B:C0
  54. ethprime=egiga0
  55. bootargs_root=root=/dev/nfs rw
  56. bootargs_end=:::DB88FXX81:eth0:none
  57. image_name=uImage
  58. standalone=fsload 0x2000000 $(image_name);setenv bootargs $(console) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end) $(mvPhoneConfig); bootm 0x2000000;
  59. ethmtu=1500
  60. mvPhoneConfig=mv_phone_config=dev[0]:fxs,dev[1]:fxo
  61. mvNetConfig=mv_net_config=(00:11:88:0f:62:81,0:1:2:3),mtu=1500
  62. usb0Mode=host
  63. yuk_ethaddr=00:00:00:EE:51:81
  64. netretry=no
  65. rcvrip=169.254.100.100
  66. loadaddr=0x02000000
  67. autoload=no
  68. image_multi=yes
  69. ethact=egiga0
  70. ipaddr=192.168.2.113
  71. netmask=255.255.255.0
  72. serverip=192.168.2.213
  73. init_usb=mw.l f1010100 1361c000;usb reset
  74. init_eth=phyWrite 1 0x16 0x3;phyWrite 1 0x10 0x1017;phyWrite 1 0x11 0x4408;phyWrite 1 0x16 0;phyWrite 1 0x4 0x1e1;phyWrite 1 0x9 0x300;phyWrite 1 0x10 0x3860;phyWrite 1 0x0 0x9140
  75. init_sata=mw.l f1010104 c70e0ffd;ide reset
  76. bootcmd_nand=setenv bootargs ${bootargs_console} ${bootargs_mtdpartitions} root=/dev/nfs rw init=/init;nand read.e 0x2000000 ${kernel_addr} 0xa00000; bootm 0x2000000
  77. bootcmd=run init_eth;run init_usb;run init_sata;run bootcmd_usb;run bootcmd_sata;run bootcmd_nand
  78. bootcmd_usb=setenv bootargs ${bootargs_console} ${bootargs_mtdpartitions} netconsole=6665@${ipaddr}/eth0,6666@${serverip}/;fatload usb 0 0x800000 /uimage;fatload usb 0 0xf00000 /uinitrd;bootm 0x800000 0xf00000
  79. bootcmd_sata=setenv bootargs ${bootargs_console} ${bootargs_mtdpartitions} netconsole=6665@${ipaddr}/eth0,6666@${serverip}/ root=/dev/md0 ro;ext2load ide 0:1 0x800000 /uimage;bootm 0x800000
  80. bootargs_console=console=ttyS0,115200
  81. bootargs_mtdpartitions=mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2)
  82. stdin=serial
  83. stdout=serial
  84. stderr=serial
  85. console=console=ttyS0,115200 mtdparts=nand_mtd:0xc0000@0(uboot)ro,0x7f00000@0x100000(root)
  86. mainlineLinux=no
  87. enaMonExt=no
  88. enaCpuStream=no
  89. enaWrAllo=no
  90. pexMode=RC
  91. disL2Cache=no
  92. setL2CacheWT=yes
  93. disL2Prefetch=yes
  94. enaICPref=yes
  95. enaDCPref=yes
  96. sata_dma_mode=yes
  97. netbsd_en=no
  98. vxworks_en=no
  99. disaMvPnp=no
  100. enaAutoRecovery=yes
  101. kernel_addr=0xc80000
  102. pcieTune=no
  103.  
  104. Environment size: 2376/131068 bytes
  105. Marvell>> boot
  106.  
  107. (Re)start USB...
  108. USB: scanning bus for devices... 3 USB Device(s) found
  109. Waiting for storage device(s) to settle before scanning...
  110. 1 Storage Device(s) found
  111.  
  112. Reset IDE:
  113. Marvell Serial ATA Adapter
  114. Integrated Sata device found
  115. [0 0 0]: Enable DMA mode (6)
  116. Device 0 @ 0 0:
  117. Model: WDC WD5000AZRX-00A8LB0 Firm: 01.01A01 Ser#: WD-WMC1U2971198
  118. Type: Hard Disk
  119. Supports 48-bit addressing
  120. Capacity: 476940.0 MB = 465.7 GB (976773168 x 512)
  121.  
  122. reading /uimage
  123. ....................................................................................................................................................................................................................................................................................................................................................................................
  124. .................................................................................................................................................................
  125.  
  126. 5466070 bytes read
  127. reading /uinitrd
  128. ..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  129. .....................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
  130.  
  131. 12530877 bytes read
  132. ## Booting image at 00800000 ...
  133. Image Name: 5.7.1-kirkwood-tld-1
  134. Created: 2020-06-16 23:47:46 UTC
  135. Image Type: ARM Linux Kernel Image (uncompressed)
  136. Data Size: 5466006 Bytes = 5.2 MB
  137. Load Address: 00008000
  138. Entry Point: 00008000
  139. Verifying Checksum ... OK
  140. OK
  141. ## Loading Ramdisk Image at 00f00000 ...
  142. Image Name: netboot
  143. Created: 2020-06-16 23:52:04 UTC
  144. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  145. Data Size: 12530813 Bytes = 12 MB
  146. Load Address: 00000000
  147. Entry Point: 00000000
  148. Verifying Checksum ... OK
  149.  
  150. Starting kernel ...
  151.  
  152. Uncompressing Linux... done, booting the kernel.
  153. [ 0.000000][ T0] Booting Linux on physical CPU 0x0
  154. [ 0.000000][ T0] Linux version 5.7.1-kirkwood-tld-1 (root@tldDebian) (gcc version 8.3.0 (Debian 8.3.0-6), GNU ld (GNU Binutils for Debian) 2.31.1) #1.0 PREEMPT Sun Jun 7 20:57:38 PDT 2020
  155. [ 0.000000][ T0] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
  156. [ 0.000000][ T0] CPU: VIVT data cache, VIVT instruction cache
  157. [ 0.000000][ T0] OF: fdt: Machine model: Zyxel NSA310S
  158. [ 0.000000][ T0] Memory policy: Data cache writeback
  159. [ 0.000000][ T0] INITRD: 0x00f00000+0x00bf4000 overlaps in-use memory region - disabling initrd
  160. [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 65024
  161. [ 0.000000][ T0] Kernel command line: console=ttyS0,115200 mtdparts=nand_mtd:0x100000(uboot),0x80000(uboot_env),0x80000(key_store),0x80000(info),0xA00000(etc),0xA00000(kernel_1),0x2FC0000(rootfs1),0xA00000(kernel_2),0x2FC0000(rootfs2) [email protected]/eth0,[email protected]/
  162. [ 0.000000][ T0] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
  163. [ 0.000000][ T0] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
  164. [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:on, heap free:off
  165. [ 0.000000][ T0] Memory: 242040K/262144K available (10240K kernel code, 1052K rwdata, 4044K rodata, 1024K init, 295K bss, 20104K reserved, 0K cma-reserved)
  166. [ 0.000000][ T0] random: get_random_u32 called from ____cache_alloc+0x470/0x80c with crng_init=0
  167. [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
  168. [ 0.000000][ T0] Tasks RCU enabled.
  169. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  170. [ 0.000000][ T0] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  171. [ 0.000000][ T0] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 11467562657 ns
  172. [ 0.000010][ T0] sched_clock: 32 bits at 166MHz, resolution 6ns, wraps every 12884901885ns
  173. [ 0.000056][ T0] Switching to timer-based delay loop, resolution 6ns
  174. [ 0.000943][ T0] Console: colour dummy device 80x30
  175. [ 0.000998][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 333.33 BogoMIPS (lpj=1666666)
  176. [ 0.001028][ T0] pid_max: default: 32768 minimum: 301
  177. [ 0.001500][ T0] LSM: Security Framework initializing
  178. [ 0.001684][ T0] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  179. [ 0.001713][ T0] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
  180. [ 0.003191][ T0] CPU: Testing write buffer coherency: ok
  181. [ 0.005058][ T1] Setting up static identity map for 0x100000 - 0x100058
  182. [ 0.005394][ T1] mvebu-soc-id: MVEBU SoC ID=0x6702, Rev=0x3
  183. [ 0.005729][ T1] rcu: Hierarchical SRCU implementation.
  184. [ 0.008798][ T1] devtmpfs: initialized
  185. [ 0.016466][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  186. [ 0.016506][ T1] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
  187. [ 0.016814][ T1] xor: measuring software checksum speed
  188. [ 0.110132][ T1] arm4regs : 902.400 MB/sec
  189. [ 0.210084][ T1] 8regs : 541.600 MB/sec
  190. [ 0.310089][ T1] 32regs : 787.600 MB/sec
  191. [ 0.310111][ T1] xor: using function: arm4regs (902.400 MB/sec)
  192. [ 0.310138][ T1] prandom: seed boundary self test passed
  193. [ 0.315174][ T1] prandom: 100 self tests passed
  194. [ 0.315190][ T1] pinctrl core: initialized pinctrl subsystem
  195. [ 0.316221][ T1] thermal_sys: Registered thermal governor 'step_wise'
  196. [ 0.316935][ T1] NET: Registered protocol family 16
  197. [ 0.317662][ T1] DMA: preallocated 256 KiB pool for atomic coherent allocations
  198. [ 0.318727][ T1] audit: initializing netlink subsys (disabled)
  199. [ 0.320395][ T14] audit: type=2000 audit(0.310:1): state=initialized audit_enabled=0 res=1
  200. [ 0.320531][ T1] cpuidle: using governor ladder
  201. [ 0.320615][ T1] cpuidle: using governor menu
  202. [ 0.321140][ T1] Feroceon L2: Enabling L2
  203. [ 0.321189][ T1] Feroceon L2: Cache support initialised.
  204. [ 0.328600][ T1] No ATAGs?
  205. [ 2.560063][ C0] random: fast init done
  206. [ 6.420266][ T1] raid6: int32x8 gen() 93 MB/s
  207. [ 6.590286][ T1] raid6: int32x8 xor() 58 MB/s
  208. [ 6.760244][ T1] raid6: int32x4 gen() 95 MB/s
  209. [ 6.930157][ T1] raid6: int32x4 xor() 61 MB/s
  210. [ 7.100147][ T1] raid6: int32x2 gen() 124 MB/s
  211. [ 7.270192][ T1] raid6: int32x2 xor() 74 MB/s
  212. [ 7.440271][ T1] raid6: int32x1 gen() 94 MB/s
  213. [ 7.610079][ T1] raid6: int32x1 xor() 54 MB/s
  214. [ 7.610092][ T1] raid6: using algorithm int32x2 gen() 124 MB/s
  215. [ 7.610103][ T1] raid6: .... xor() 74 MB/s, rmw enabled
  216. [ 7.610113][ T1] raid6: using intx1 recovery algorithm
  217. [ 7.610426][ T1] vgaarb: loaded
  218. [ 7.611077][ T1] SCSI subsystem initialized
  219. [ 7.611653][ T1] usbcore: registered new interface driver usbfs
  220. [ 7.611729][ T1] usbcore: registered new interface driver hub
  221. [ 7.611828][ T1] usbcore: registered new device driver usb
  222. [ 7.612069][ T1] pps_core: LinuxPPS API ver. 1 registered
  223. [ 7.612082][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  224. [ 7.612114][ T1] PTP clock support registered
  225. [ 7.613835][ T1] clocksource: Switched to clocksource orion_clocksource
  226. [ 9.348389][ T1] VFS: Disk quotas dquot_6.6.0
  227. [ 9.348504][ T1] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  228. [ 9.360528][ T1] NET: Registered protocol family 2
  229. [ 9.361540][ T1] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  230. [ 9.361587][ T1] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
  231. [ 9.361632][ T1] TCP bind hash table entries: 2048 (order: 1, 8192 bytes, linear)
  232. [ 9.361669][ T1] TCP: Hash tables configured (established 2048 bind 2048)
  233. [ 9.362179][ T1] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
  234. [ 9.362215][ T1] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
  235. [ 9.362473][ T1] NET: Registered protocol family 1
  236. [ 9.363225][ T1] RPC: Registered named UNIX socket transport module.
  237. [ 9.363241][ T1] RPC: Registered udp transport module.
  238. [ 9.363252][ T1] RPC: Registered tcp transport module.
  239. [ 9.363262][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
  240. [ 9.363279][ T1] PCI: CLS 0 bytes, default 32
  241. [ 9.363798][ T1] NetWinder Floating Point Emulator V0.97 (double precision)
  242. [ 9.376777][ T1] Initialise system trusted keyrings
  243. [ 9.376838][ T1] Key type blacklist registered
  244. [ 9.377079][ T1] workingset: timestamp_bits=30 max_order=16 bucket_order=0
  245. [ 9.377200][ T1] zbud: loaded
  246. [ 9.378794][ T1] NFS: Registering the id_resolver key type
  247. [ 9.378829][ T1] Key type id_resolver registered
  248. [ 9.378841][ T1] Key type id_legacy registered
  249. [ 9.378866][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  250. [ 9.378887][ T1] Installing knfsd (copyright (C) 1996 [email protected]).
  251. [ 9.379387][ T1] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  252. [ 9.379900][ T1] fuse: init (API version 7.31)
  253. [ 9.380347][ T1] orangefs_debugfs_init: called with debug mask: :none: :0:
  254. [ 9.380575][ T1] orangefs_init: module version upstream loaded
  255. [ 9.380590][ T1] SGI XFS with ACLs, security attributes, realtime, scrub, quota, no debug enabled
  256. [ 9.425371][ T1] async_tx: api initialized (async)
  257. [ 9.425399][ T1] Key type asymmetric registered
  258. [ 9.425412][ T1] Asymmetric key parser 'x509' registered
  259. [ 9.425479][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  260. [ 9.664672][ T1] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
  261. [ 9.667060][ T1] mvebu-pcie mbus@f1000000:pcie@82000000: PCI host bridge to bus 0000:00
  262. [ 9.667087][ T1] pci_bus 0000:00: root bus resource [bus 00-ff]
  263. [ 9.667105][ T1] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff]
  264. [ 9.667122][ T1] pci_bus 0000:00: root bus resource [io 0x1000-0xeffff]
  265. [ 9.667260][ T1] pci 0000:00:01.0: [11ab:6702] type 01 class 0x060400
  266. [ 9.667305][ T1] pci 0000:00:01.0: reg 0x38: [mem 0x00000000-0x000007ff pref]
  267. [ 9.668947][ T1] PCI: bus0: Fast back to back transfers disabled
  268. [ 9.668981][ T1] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  269. [ 9.670503][ T1] PCI: bus1: Fast back to back transfers enabled
  270. [ 9.670533][ T1] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  271. [ 9.670766][ T1] pci 0000:00:01.0: BAR 6: assigned [mem 0xe0000000-0xe00007ff pref]
  272. [ 9.670787][ T1] pci 0000:00:01.0: PCI bridge to [bus 01]
  273. [ 9.671498][ T1] mv_xor f1060800.xor: Marvell shared XOR driver
  274. [ 9.735029][ T1] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
  275. [ 9.738077][ T1] mv_xor f1060900.xor: Marvell shared XOR driver
  276. [ 9.795021][ T1] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy intr )
  277. [ 9.798334][ T1] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  278. [ 9.799880][ T1] printk: console [ttyS0] disabled
  279. [ 9.799951][ T1] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 26, base_baud = 10416666) is a 16550A
  280. [ 10.642131][ T1] printk: console [ttyS0] enabled
  281. [ 10.656597][ T1] loop: module loaded
  282. [ 10.661106][ T1] sata_mv f1080000.sata: slots 32 ports 2
  283. [ 10.670625][ T1] scsi host0: sata_mv
  284. [ 10.675160][ T1] scsi host1: sata_mv
  285. [ 10.679277][ T1] ata1: SATA max UDMA/133 irq 32
  286. [ 10.684120][ T1] ata2: SATA max UDMA/133 irq 32
  287. [ 10.690024][ T1] nand: device found, Manufacturer ID: 0xec, Chip ID: 0xf1
  288. [ 10.697177][ T1] nand: Samsung NAND 128MiB 3,3V 8-bit
  289. [ 10.702467][ T1] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  290. [ 10.710733][ T1] Scanning device for bad blocks
  291. [ 10.746240][ T1] Bad eraseblock 302 at 0x0000025c0000
  292. [ 10.765482][ T1] Bad eraseblock 440 at 0x000003700000
  293. [ 10.788673][ T1] Bad eraseblock 617 at 0x000004d20000
  294. [ 10.822724][ T1] Bad eraseblock 901 at 0x0000070a0000
  295. [ 10.840487][ T1] 9 fixed-partitions partitions found on MTD device orion_nand
  296. [ 10.847877][ T1] Creating 9 MTD partitions on "orion_nand":
  297. [ 10.853688][ T1] 0x000000000000-0x000000100000 : "uboot"
  298. [ 10.860991][ T1] 0x000000100000-0x000000180000 : "uboot_env"
  299. [ 10.868548][ T1] 0x000000180000-0x000000200000 : "key_store"
  300. [ 10.876131][ T1] 0x000000200000-0x000000280000 : "info"
  301. [ 10.883222][ T1] 0x000000280000-0x000000c80000 : "etc"
  302. [ 10.890325][ T1] 0x000000c80000-0x000001680000 : "kernel_1"
  303. [ 10.897847][ T1] 0x000001680000-0x000004640000 : "rootfs1"
  304. [ 10.905499][ T1] 0x000004640000-0x000005040000 : "kernel_2"
  305. [ 10.912968][ T1] 0x000005040000-0x000008000000 : "rootfs2"
  306. [ 10.921121][ T1] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  307. [ 10.929689][ T1] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <[email protected]>. All Rights Reserved.
  308. [ 10.941588][ T1] libphy: Fixed MDIO Bus: probed
  309. [ 10.947857][ T1] libphy: orion_mdio_bus: probed
  310. [ 10.952707][ T1] [Firmware Warn]: /ocp@f1000000/mdio-bus@72004/ethernet-phy@1: Whitelisted compatible string. Please remove
  311. [ 10.965568][ T1] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
  312. [ 10.974241][ T1] mv643xx_eth: Set the PHY to fix link down
  313. [ 10.974995][ T1] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 5c:f4:ab:50:3b:c0
  314. [ 10.990385][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  315. [ 10.997713][ T1] ehci-pci: EHCI PCI platform driver
  316. [ 11.002938][ T1] ehci-orion: EHCI orion driver
  317. [ 11.007902][ T1] orion-ehci f1050000.ehci: EHCI Host Controller
  318. [ 11.014193][ T1] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
  319. [ 11.022787][ T1] orion-ehci f1050000.ehci: irq 30, io mem 0xf1050000
  320. [ 11.053876][ T1] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
  321. [ 11.060870][ T1] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.07
  322. [ 11.069824][ T1] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  323. [ 11.077737][ T1] usb usb1: Product: EHCI Host Controller
  324. [ 11.083285][ T1] usb usb1: Manufacturer: Linux 5.7.1-kirkwood-tld-1 ehci_hcd
  325. [ 11.090582][ T1] usb usb1: SerialNumber: f1050000.ehci
  326. [ 11.096759][ T1] hub 1-0:1.0: USB hub found
  327. [ 11.101230][ T1] hub 1-0:1.0: 1 port detected
  328. [ 11.106745][ T1] usbcore: registered new interface driver usb-storage
  329. [ 11.113920][ T1] mousedev: PS/2 mouse device common for all mice
  330. [ 11.120490][ T1] i2c /dev entries driver
  331. [ 11.127477][ T1] ht1382 0-0068: registered as rtc0
  332. [ 11.134637][ T1] device-mapper: uevent: version 1.0.3
  333. [ 11.140273][ T1] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: [email protected]
  334. [ 11.149921][ T1] device-mapper: multipath round-robin: version 1.2.0 loaded
  335. [ 11.157199][ T1] device-mapper: multipath queue-length: version 0.2.0 loaded
  336. [ 11.164531][ T1] device-mapper: multipath service-time: version 0.3.0 loaded
  337. [ 11.171874][ T1] device-mapper: dm-log-userspace: version 1.3.0 loaded
  338. [ 11.178664][ T1] device-mapper: raid: Loading target version 1.15.1
  339. [ 11.187822][ T1] hid: raw HID events driver (C) Jiri Kosina
  340. [ 11.193936][ T135] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
  341. [ 11.201238][ T1] drop_monitor: Initializing network drop monitor service
  342. [ 11.208975][ T1] NET: Registered protocol family 10
  343. [ 11.215790][ T1] Segment Routing with IPv6
  344. [ 11.220130][ T1] RPL Segment Routing with IPv6
  345. [ 11.224988][ T1] NET: Registered protocol family 17
  346. [ 11.230367][ T1] Key type dns_resolver registered
  347. [ 11.235832][ T1] registered taskstats version 1
  348. [ 11.240607][ T1] Loading compiled-in X.509 certificates
  349. [ 11.246200][ T135] ata1.00: ATA-8: WDC WD5000AZRX-00A8LB0, 01.01A01, max UDMA/133
  350. [ 11.253745][ T135] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  351. [ 11.261296][ T1] zswap: loaded using pool lzo/zbud
  352. [ 11.266819][ T1] Key type ._fscrypt registered
  353. [ 11.271504][ T1] Key type .fscrypt registered
  354. [ 11.276496][ T1] Key type fscrypt-provisioning registered
  355. [ 11.284539][ T135] ata1.00: configured for UDMA/133
  356. [ 11.300056][ T7] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AZRX-0 1A01 PQ: 0 ANSI: 5
  357. [ 11.323147][ T7] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  358. [ 11.331847][ T1] Key type big_key registered
  359. [ 11.336783][ T7] sd 0:0:0:0: [sda] 4096-byte physical blocks
  360. [ 11.343027][ T7] sd 0:0:0:0: [sda] Write Protect is off
  361. [ 11.352229][ T7] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  362. [ 11.362262][ T1] Key type encrypted registered
  363. [ 11.402773][ T7] sda: sda1 sda2 sda3
  364. [ 11.409053][ T7] sd 0:0:0:0: [sda] Attached SCSI disk
  365. [ 11.473878][ T5] usb 1-1: new high-speed USB device number 2 using orion-ehci
  366. [ 11.655526][ T137] ata2: SATA link down (SStatus 0 SControl F300)
  367. [ 11.671917][ T1] md: Waiting for all devices to be available before autodetect
  368. [ 11.679473][ T1] md: If you don't use raid, use raid=noautodetect
  369. [ 11.687035][ T1] md: Autodetecting RAID arrays.
  370. [ 11.691865][ T5] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.32
  371. [ 11.700766][ T1] md: autorun ...
  372. [ 11.704266][ T1] md: ... autorun DONE.
  373. [ 11.708528][ T1] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
  374. [ 11.716741][ T5] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  375. [ 11.724598][ T5] usb 1-1: Product: USB2.0 Hub
  376. [ 11.729482][ T1] Please append a correct "root=" boot option; here are the available partitions:
  377. [ 11.738788][ T1] 1f00 1024 mtdblock0
  378. [ 11.738793][ T1] (driver?)
  379. [ 11.746964][ T5] hub 1-1:1.0: USB hub found
  380. [ 11.751491][ T1] 1f01 512 mtdblock1
  381. [ 11.751495][ T1] (driver?)
  382. [ 11.759463][ T5] hub 1-1:1.0: 4 ports detected
  383. [ 11.764237][ T1] 1f02 512 mtdblock2
  384. [ 11.764241][ T1] (driver?)
  385. [ 11.772137][ T1] 1f03 512 mtdblock3
  386. [ 11.772140][ T1] (driver?)
  387. [ 11.780125][ T1] 1f04 10240 mtdblock4
  388. [ 11.780128][ T1] (driver?)
  389. [ 11.788129][ T1] 1f05 10240 mtdblock5
  390. [ 11.788133][ T1] (driver?)
  391. [ 11.796508][ T1] 1f06 48896 mtdblock6
  392. [ 11.796512][ T1] (driver?)
  393. [ 11.804510][ T1] 1f07 10240 mtdblock7
  394. [ 11.804514][ T1] (driver?)
  395. [ 11.812473][ T1] 1f08 48896 mtdblock8
  396. [ 11.812477][ T1] (driver?)
  397. [ 11.820466][ T1] 0800 488386584 sda
  398. [ 11.820471][ T1] driver: sd
  399. [ 11.828345][ T1] 0801 96256 sda1 e4a4a69c-01
  400. [ 11.828349][ T1]
  401. [ 11.836152][ T1] 0802 487695360 sda2 e4a4a69c-02
  402. [ 11.836155][ T1]
  403. [ 11.843899][ T1] 0803 592896 sda3 e4a4a69c-03
  404. [ 11.843902][ T1]
  405. [ 11.851634][ T1] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
  406. [ 11.860558][ T1] CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.1-kirkwood-tld-1 #1.0
  407. [ 11.868354][ T1] Hardware name: Marvell Kirkwood (Flattened Device Tree)
  408. [ 11.875312][ T1] [<8010e7cc>] (unwind_backtrace) from [<8010ab50>] (show_stack+0x10/0x14)
  409. [ 11.883719][ T1] [<8010ab50>] (show_stack) from [<8011c804>] (panic+0xfc/0x328)
  410. [ 11.891267][ T1] [<8011c804>] (panic) from [<810019c8>] (mount_block_root+0x1dc/0x268)
  411. [ 11.899421][ T1] [<810019c8>] (mount_block_root) from [<81001b44>] (mount_root+0xf0/0x130)
  412. [ 11.907923][ T1] [<81001b44>] (mount_root) from [<81001cc8>] (prepare_namespace+0x144/0x180)
  413. [ 11.916597][ T1] [<81001cc8>] (prepare_namespace) from [<810014d8>] (kernel_init_freeable+0x17c/0x1dc)
  414. [ 11.926136][ T1] [<810014d8>] (kernel_init_freeable) from [<80a61768>] (kernel_init+0x8/0x10c)
  415. [ 11.934980][ T1] [<80a61768>] (kernel_init) from [<80100140>] (ret_from_fork+0x14/0x34)
  416. [ 11.943204][ T1] Exception stack(0x8f83ffb0 to 0x8f83fff8)
  417. [ 11.948927][ T1] ffa0: 00000000 00000000 00000000 00000000
  418. [ 11.957759][ T1] ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
  419. [ 11.966596][ T1] ffe0: 00000000 00000000 00000000 00000000 00000013 00000000
  420. [ 11.973881][ T1] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) ]---
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!