API tools faq
paste
xartin

rt3200 Openwrt 23.05.02 kernel panic

xartin
Dec 29th, 2023
45
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.54 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.15.137 (builder@buildhost) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 12.3.0 r23630-842932a63d) 12.3.0, GNU ld (GNU Binutils) 2.40.0) #0 SMP Tue Nov 14 13:38:11 2023
  3. [ 0.000000] Machine model: Linksys E8450 (UBI)
  4. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
  5. [ 0.000000] printk: bootconsole [uart8250] enabled
  6. [ 0.000000] Zone ranges:
  7. [ 0.000000] DMA [mem 0x0000000040000000-0x000000005fffffff]
  8. [ 0.000000] DMA32 empty
  9. [ 0.000000] Normal empty
  10. [ 0.000000] Movable zone start for each node
  11. [ 0.000000] Early memory node ranges
  12. [ 0.000000] node 0: [mem 0x0000000040000000-0x0000000042ffffff]
  13. [ 0.000000] node 0: [mem 0x0000000043000000-0x000000004302ffff]
  14. [ 0.000000] node 0: [mem 0x0000000043030000-0x000000005fffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000005fffffff]
  16. [ 0.000000] psci: probing for conduit method from DT.
  17. [ 0.000000] psci: PSCIv1.1 detected in firmware.
  18. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  19. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  20. [ 0.000000] psci: SMC Calling Convention v1.2
  21. [ 0.000000] percpu: Embedded 17 pages/cpu s30040 r8192 d31400 u69632
  22. [ 0.000000] pcpu-alloc: s30040 r8192 d31400 u69632 alloc=17*4096
  23. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  24. [ 0.000000] Detected VIPT I-cache on CPU0
  25. [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  26. [ 0.000000] CPU features: detected: ARM erratum 843419
  27. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129024
  28. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512
  29. [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  30. [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  31. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  32. [ 0.000000] Memory: 502064K/524288K available (8384K kernel code, 902K rwdata, 1416K rodata, 448K init, 306K bss, 22224K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  34. [ 0.000000] rcu: Hierarchical RCU implementation.
  35. [ 0.000000] Tracing variant of Tasks RCU enabled.
  36. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  37. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  38. [ 0.000000] Root IRQ handler: 0xffffffc008421b34
  39. [ 0.000000] GIC: Using split EOI/Deactivate mode
  40. [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
  41. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  42. [ 0.000000] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  43. [ 0.008240] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000)
  44. [ 0.018640] pid_max: default: 32768 minimum: 301
  45. [ 0.023559] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  46. [ 0.030906] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes, linear)
  47. [ 0.040045] rcu: Hierarchical SRCU implementation.
  48. [ 0.045324] smp: Bringing up secondary CPUs ...
  49. [ 0.050224] Detected VIPT I-cache on CPU1
  50. [ 0.050234] CPU features: SANITY CHECK: Unexpected variation in SYS_CNTFRQ_EL0. Boot CPU: 0x00000000bebc20, CPU1: 0x00000000000000
  51. [ 0.050254] CPU features: Unsupported CPU feature variation detected.
  52. [ 0.050284] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  53. [ 0.050354] smp: Brought up 1 node, 2 CPUs
  54. [ 0.083280] SMP: Total of 2 processors activated.
  55. [ 0.087997] CPU features: detected: 32-bit EL0 Support
  56. [ 0.093153] CPU features: detected: CRC32 instructions
  57. [ 0.098336] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  58. [ 0.106782] CPU: All CPU(s) started at EL2
  59. [ 0.110894] alternatives: patching kernel code
  60. [ 0.119821] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  61. [ 0.129725] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  62. [ 0.136695] pinctrl core: initialized pinctrl subsystem
  63. [ 0.142811] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  64. [ 0.149087] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  65. [ 0.156220] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  66. [ 0.164010] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  67. [ 0.172247] thermal_sys: Registered thermal governor 'fair_share'
  68. [ 0.172251] thermal_sys: Registered thermal governor 'bang_bang'
  69. [ 0.178363] thermal_sys: Registered thermal governor 'step_wise'
  70. [ 0.184394] thermal_sys: Registered thermal governor 'user_space'
  71. [ 0.190621] ASID allocator initialised with 65536 entries
  72. [ 0.202515] pstore: Registered ramoops as persistent store backend
  73. [ 0.208723] ramoops: using 0x10000@0x42ff0000, ecc: 0
  74. [ 0.235591] cryptd: max_cpu_qlen set to 1000
  75. [ 0.242516] SCSI subsystem initialized
  76. [ 0.246479] libata version 3.00 loaded.
  77. [ 0.251593] clocksource: Switched to clocksource arch_sys_counter
  78. [ 0.258331] NET: Registered PF_INET protocol family
  79. [ 0.263352] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
  80. [ 0.271138] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  81. [ 0.279547] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  82. [ 0.287326] TCP established hash table entries: 4096 (order: 3, 32768 bytes, linear)
  83. [ 0.295130] TCP bind hash table entries: 4096 (order: 4, 65536 bytes, linear)
  84. [ 0.302350] TCP: Hash tables configured (established 4096 bind 4096)
  85. [ 0.308809] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  86. [ 0.315375] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  87. [ 0.322524] NET: Registered PF_UNIX/PF_LOCAL protocol family
  88. [ 0.328221] PCI: CLS 0 bytes, default 64
  89. [ 0.334588] workingset: timestamp_bits=46 max_order=17 bucket_order=0
  90. [ 0.344683] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  91. [ 0.350548] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  92. [ 0.393105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
  93. [ 0.401738] mt7622-pinctrl 10211000.pinctrl: invalid group "pwm_ch7_2" for function "pwm"
  94. [ 0.414524] mt-pmic-pwrap 10001000.pwrap: unexpected interrupt int=0x1
  95. [ 0.429542] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  96. [ 0.438292] printk: console [ttyS0] disabled
  97. [ 0.462784] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 125, base_baud = 1562500) is a ST16650V2
  98. [ 0.472107] printk: console [ttyS0] enabled
  99. [ 0.480472] printk: bootconsole [uart8250] disabled
  100. [ 0.511044] 11004000.serial: ttyS1 at MMIO 0x11004000 (irq = 126, base_baud = 1562500) is a ST16650V2
  101. [ 0.521166] 1100c000.serial: ttyS2 at MMIO 0x1100c000 (irq = 130, base_baud = 17499995) is a MediaTek BTIF
  102. [ 0.530990] serial serial0: tty port ttyS2 registered
  103. [ 0.536813] mtk_rng 1020f000.rng: registered RNG driver
  104. [ 0.541790] random: crng init done
  105. [ 0.548895] loop: module loaded
  106. [ 0.552093] Loading iSCSI transport class v2.0-870.
  107. [ 0.558315] mtk-ecc 1100e000.ecc: probed
  108. [ 0.565195] spi-nand spi2.0: Fidelix SPI NAND was found.
  109. [ 0.570515] spi-nand spi2.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
  110. [ 0.578673] mtk-snand 1100d000.spi: ECC strength: 4 bits per 512 bytes
  111. [ 0.585480] 4 fixed-partitions partitions found on MTD device spi2.0
  112. [ 0.591900] OF: Bad cell count for /spi@1100d000/flash@0/partitions
  113. [ 0.598186] OF: Bad cell count for /spi@1100d000/flash@0/partitions
  114. [ 0.604740] Creating 4 MTD partitions on "spi2.0":
  115. [ 0.609536] 0x000000000000-0x000000080000 : "bl2"
  116. [ 0.615195] 0x000000080000-0x0000001c0000 : "fip"
  117. [ 0.621662] 0x0000001c0000-0x0000002c0000 : "factory"
  118. [ 0.628188] 0x000000300000-0x000008000000 : "ubi"
  119. [ 0.895189] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffffc009340000, irq 141
  120. [ 0.905115] i2c_dev: i2c /dev entries driver
  121. [ 0.910680] mtk-wdt 10212000.watchdog: IRQ index 0 not found
  122. [ 0.916559] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
  123. [ 0.926692] NET: Registered PF_INET6 protocol family
  124. [ 0.932721] Segment Routing with IPv6
  125. [ 0.936399] In-situ OAM (IOAM) with IPv6
  126. [ 0.940352] NET: Registered PF_PACKET protocol family
  127. [ 0.945465] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  128. [ 0.958603] 8021q: 802.1Q VLAN Support v1.8
  129. [ 0.963977] pstore: Using crash dump compression: deflate
  130. [ 0.979454] mtk-pcie 1a143000.pcie: host bridge /pcie@1a143000 ranges:
  131. [ 0.986025] mtk-pcie 1a143000.pcie: Parsing ranges property...
  132. [ 0.991884] mtk-pcie 1a143000.pcie: MEM 0x0020000000..0x0027ffffff -> 0x0020000000
  133. [ 1.128078] mtk-pcie 1a143000.pcie: PCI host bridge to bus 0000:00
  134. [ 1.134301] pci_bus 0000:00: root bus resource [bus 00-ff]
  135. [ 1.139792] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
  136. [ 1.146670] pci_bus 0000:00: scanning bus
  137. [ 1.150866] pci 0000:00:00.0: [14c3:3258] type 01 class 0x060400
  138. [ 1.157064] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x1ffffffff 64bit pref]
  139. [ 1.167022] pci_bus 0000:00: fixups for bus
  140. [ 1.171217] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
  141. [ 1.177937] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  142. [ 1.186018] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
  143. [ 1.193152] pci_bus 0000:01: scanning bus
  144. [ 1.197376] pci 0000:01:00.0: [14c3:7915] type 00 class 0x000280
  145. [ 1.203572] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit pref]
  146. [ 1.210900] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit pref]
  147. [ 1.218230] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00000fff 64bit pref]
  148. [ 1.226212] pci 0000:01:00.0: supports D1 D2
  149. [ 1.230477] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  150. [ 1.237121] pci 0000:01:00.0: PME# disabled
  151. [ 1.241638] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
  152. [ 1.284961] pci_bus 0000:01: fixups for bus
  153. [ 1.289172] pci_bus 0000:01: bus scan returning with max=01
  154. [ 1.294782] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  155. [ 1.301422] pci_bus 0000:00: bus scan returning with max=01
  156. [ 1.307017] pci 0000:00:00.0: BAR 0: no space for [mem size 0x200000000 64bit pref]
  157. [ 1.314674] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x200000000 64bit pref]
  158. [ 1.322684] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x201fffff]
  159. [ 1.329470] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit pref]
  160. [ 1.337301] pci 0000:01:00.0: BAR 2: assigned [mem 0x20100000-0x20103fff 64bit pref]
  161. [ 1.345130] pci 0000:01:00.0: BAR 4: assigned [mem 0x20104000-0x20104fff 64bit pref]
  162. [ 1.352955] pci 0000:00:00.0: PCI bridge to [bus 01]
  163. [ 1.357917] pci 0000:00:00.0: bridge window [mem 0x20000000-0x201fffff]
  164. [ 1.364845] pcieport 0000:00:00.0: assign IRQ: got 146
  165. [ 1.369989] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  166. [ 1.376102] pcieport 0000:00:00.0: enabling bus mastering
  167. [ 1.381534] mtk-pcie 1a143000.pcie: msi#0 address_hi 0x0 address_lo 0x44d6d0c0
  168. [ 1.388937] pcieport 0000:00:00.0: PME: Signaling with IRQ 146
  169. [ 1.394872] pcieport 0000:00:00.0: saving config space at offset 0x0 (reading 0x325814c3)
  170. [ 1.403068] pcieport 0000:00:00.0: saving config space at offset 0x4 (reading 0x100006)
  171. [ 1.411069] pcieport 0000:00:00.0: saving config space at offset 0x8 (reading 0x6040000)
  172. [ 1.419158] pcieport 0000:00:00.0: saving config space at offset 0xc (reading 0x10000)
  173. [ 1.427073] pcieport 0000:00:00.0: saving config space at offset 0x10 (reading 0xc)
  174. [ 1.434726] pcieport 0000:00:00.0: saving config space at offset 0x14 (reading 0x0)
  175. [ 1.442382] pcieport 0000:00:00.0: saving config space at offset 0x18 (reading 0x40010100)
  176. [ 1.450639] pcieport 0000:00:00.0: saving config space at offset 0x1c (reading 0x4200000)
  177. [ 1.458814] pcieport 0000:00:00.0: saving config space at offset 0x20 (reading 0x20102000)
  178. [ 1.467078] pcieport 0000:00:00.0: saving config space at offset 0x24 (reading 0x0)
  179. [ 1.474732] pcieport 0000:00:00.0: saving config space at offset 0x28 (reading 0x0)
  180. [ 1.482386] pcieport 0000:00:00.0: saving config space at offset 0x2c (reading 0x0)
  181. [ 1.490035] pcieport 0000:00:00.0: saving config space at offset 0x30 (reading 0x0)
  182. [ 1.497688] pcieport 0000:00:00.0: saving config space at offset 0x34 (reading 0x50)
  183. [ 1.505428] pcieport 0000:00:00.0: saving config space at offset 0x38 (reading 0x0)
  184. [ 1.513082] pcieport 0000:00:00.0: saving config space at offset 0x3c (reading 0x20192)
  185. [ 1.521657] mtk-pcie 1a145000.pcie: host bridge /pcie@1a145000 ranges:
  186. [ 1.528209] mtk-pcie 1a145000.pcie: Parsing ranges property...
  187. [ 1.534049] mtk-pcie 1a145000.pcie: MEM 0x0028000000..0x002fffffff -> 0x0028000000
  188. [ 1.761666] mtk-pcie 1a145000.pcie: Port1 link down
  189. [ 1.766746] mtk-pcie 1a145000.pcie: PCI host bridge to bus 0001:00
  190. [ 1.772954] pci_bus 0001:00: root bus resource [bus 00-ff]
  191. [ 1.778445] pci_bus 0001:00: root bus resource [mem 0x28000000-0x2fffffff]
  192. [ 1.785327] pci_bus 0001:00: scanning bus
  193. [ 1.791050] pci_bus 0001:00: fixups for bus
  194. [ 1.795244] pci_bus 0001:00: bus scan returning with max=00
  195. [ 1.801417] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered
  196. [ 1.851907] mt7530-mdio mdio-bus:00: configuring for fixed/2500base-x link mode
  197. [ 1.862051] mt7530-mdio mdio-bus:00: Link is Up - 2.5Gbps/Full - flow control rx/tx
  198. [ 1.870249] mt7530-mdio mdio-bus:00 lan1 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7531 PHY] (irq=147)
  199. [ 1.891229] mt7530-mdio mdio-bus:00 lan2 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7531 PHY] (irq=148)
  200. [ 1.911614] mt7530-mdio mdio-bus:00 lan3 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7531 PHY] (irq=149)
  201. [ 1.931932] mt7530-mdio mdio-bus:00 lan4 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7531 PHY] (irq=150)
  202. [ 1.952508] mt7530-mdio mdio-bus:00 wan (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7531 PHY] (irq=151)
  203. [ 1.963777] DSA: tree 0 setup
  204. [ 1.967665] UBI: auto-attach mtd3
  205. [ 1.970996] ubi0: default fastmap pool size: 50
  206. [ 1.975568] ubi0: default fastmap WL pool size: 25
  207. [ 1.980352] ubi0: attaching mtd3
  208. [ 2.282684] ubi0: scanning is finished
  209. [ 2.292455] ubi0: attached mtd3 (name "ubi", size 125 MiB)
  210. [ 2.297956] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  211. [ 2.304843] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  212. [ 2.311640] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  213. [ 2.318596] ubi0: good PEBs: 1000, bad PEBs: 0, corrupted PEBs: 0
  214. [ 2.324689] ubi0: user volume: 6, internal volumes: 1, max. volumes count: 128
  215. [ 2.331910] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 794681128
  216. [ 2.340949] ubi0: available PEBs: 0, total reserved PEBs: 1000, PEBs reserved for bad PEB handling: 20
  217. [ 2.350266] ubi0: background thread "ubi_bgt0d" started, PID 520
  218. [ 2.357380] FIT: Default configuration: "config-1" (OpenWrt linksys_e8450-ubi)
  219. [ 2.364639] FIT: kernel sub-image 0x00001000..0x004e6e96 "kernel-1" (ARM64 OpenWrt Linux-5.15.137)
  220. [ 2.374561] FIT: flat_dt sub-image 0x004e7000..0x004ee712 "fdt-1" (ARM64 OpenWrt linksys_e8450-ubi device tree blob)
  221. [ 2.385957] FIT: filesystem sub-image 0x004ef000..0x00968fff "rootfs-1" (ARM64 OpenWrt linksys_e8450-ubi rootfs)
  222. [ 2.396740] FIT: selecting configured loadable "rootfs-1" to be root filesystem
  223. [ 2.404048] ubiblock0_4: p1(rootfs-1)
  224. [ 2.404247] block ubiblock0_4: created from ubi0:4(fit)
  225. [ 2.416709] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
  226. [ 2.424059] Freeing unused kernel memory: 448K
  227. [ 2.471757] Run /sbin/init as init process
  228. [ 2.475863] with arguments:
  229. [ 2.478828] /sbin/init
  230. [ 2.481532] with environment:
  231. [ 2.484697] HOME=/
  232. [ 2.487056] TERM=linux
  233. [ 2.664942] init: Console is alive
  234. [ 2.668482] init: - watchdog -
  235. [ 3.049877] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  236. [ 3.075836] usbcore: registered new interface driver usbfs
  237. [ 3.081365] usbcore: registered new interface driver hub
  238. [ 3.086756] usbcore: registered new device driver usb
  239. [ 3.097033] xhci-mtk 1a0c0000.usb: xHCI Host Controller
  240. [ 3.102322] xhci-mtk 1a0c0000.usb: new USB bus registered, assigned bus number 1
  241. [ 3.111379] xhci-mtk 1a0c0000.usb: hcc params 0x01403198 hci version 0x96 quirks 0x0000000000210010
  242. [ 3.120492] xhci-mtk 1a0c0000.usb: irq 135, io mem 0x1a0c0000
  243. [ 3.126354] xhci-mtk 1a0c0000.usb: xHCI Host Controller
  244. [ 3.131590] xhci-mtk 1a0c0000.usb: new USB bus registered, assigned bus number 2
  245. [ 3.138990] xhci-mtk 1a0c0000.usb: Host supports USB 3.0 SuperSpeed
  246. [ 3.145769] hub 1-0:1.0: USB hub found
  247. [ 3.149574] hub 1-0:1.0: 2 ports detected
  248. [ 3.154160] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  249. [ 3.162711] hub 2-0:1.0: USB hub found
  250. [ 3.166511] hub 2-0:1.0: 1 port detected
  251. [ 3.174628] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  252. [ 3.192226] init: - preinit -
  253. [ 3.483928] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
  254. [ 3.492428] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
  255. [ 3.501916] mt7530-mdio mdio-bus:00 lan1: configuring for phy/gmii link mode
  256. [ 3.514240] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  257. [ 3.522321] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
  258. [ 5.600039] UBIFS (ubi0:5): Mounting in unauthenticated mode
  259. [ 5.605896] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 634
  260. [ 5.623472] UBIFS (ubi0:5): recovery needed
  261. [ 5.766855] UBIFS (ubi0:5): recovery completed
  262. [ 5.771407] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "rootfs_data"
  263. [ 5.779276] UBIFS (ubi0:5): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  264. [ 5.789214] UBIFS (ubi0:5): FS size: 93200384 bytes (88 MiB, 734 LEBs), max 745 LEBs, journal size 4698112 bytes (4 MiB, 37 LEBs)
  265. [ 5.800884] UBIFS (ubi0:5): reserved for root: 4402084 bytes (4298 KiB)
  266. [ 5.807505] UBIFS (ubi0:5): media format: w5/r0 (latest is w5/r0), UUID 9663A7A0-CE45-4996-89E8-400A337FC1DA, small LPT model
  267. [ 5.820733] mount_root: switching to ubifs overlay
  268. [ 5.828849] overlayfs: null uuid detected in lower fs '/', falling back to xino=off,index=off,nfs_export=off.
  269. [ 5.842003] urandom-seed: Seeding with /etc/urandom.seed
  270. [ 5.890615] mt7530-mdio mdio-bus:00 lan1: Link is Down
  271. [ 5.900277] procd: - early -
  272. [ 5.903706] procd: - watchdog -
  273. [ 6.446318] procd: - watchdog -
  274. [ 6.450695] procd: - ubus -
  275. [ 6.507624] procd: - init -
  276. [ 6.794137] kmodloader: loading kernel modules from /etc/modules.d/*
  277. [ 6.804280] Loading modules backported from Linux version v6.1.24-0-g0102425ac76b
  278. [ 6.811823] Backport generated by backports.git v5.15.92-1-44-gd6ea70fafd36
  279. [ 6.892574] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  280. [ 6.913923] mt7915e 0000:01:00.0: assign IRQ: got 146
  281. [ 6.919039] mt7915e 0000:01:00.0: enabling device (0000 -> 0002)
  282. [ 6.925189] mt7915e 0000:01:00.0: enabling bus mastering
  283. [ 7.001934] mt7622-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20190801210006a
  284. [ 7.001934]
  285. [ 7.020621] urngd: v1.0.2 started.
  286. [ 7.041667] mt7915e 0000:01:00.0: attaching wed device 0 version 1
  287. [ 7.084804] mtk_soc_eth 1b100000.ethernet eth0: Link is Down
  288. [ 7.094696] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
  289. [ 7.113287] mt7622-wmac 18000000.wmac: N9 Firmware Version: _reserved_, Build Time: 20220630094834
  290. [ 7.115978] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
  291. [ 7.130955] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  292. [ 7.186502] mt7915e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20220929104113a
  293. [ 7.186502]
  294. [ 7.375402] mt7915e 0000:01:00.0: WM Firmware Version: ____000000, Build Time: 20220929104145
  295. [ 7.430630] mt7915e 0000:01:00.0: WA Firmware Version: DEV_000000, Build Time: 20220929104205
  296. [ 7.592133] PPP generic driver version 2.4.2
  297. [ 7.597895] NET: Registered PF_PPPOX protocol family
  298. [ 7.608707] kmodloader: done loading kernel modules from /etc/modules.d/*
  299. [ 10.439417] mtk_soc_eth 1b100000.ethernet eth0: Link is Down
  300. [ 10.452647] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
  301. [ 10.461993] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
  302. [ 10.472224] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  303. [ 10.479123] mt7530-mdio mdio-bus:00 lan1: configuring for phy/gmii link mode
  304. [ 10.495815] br-lan: port 1(lan1) entered blocking state
  305. [ 10.501061] br-lan: port 1(lan1) entered disabled state
  306. [ 10.508173] device lan1 entered promiscuous mode
  307. [ 10.512860] device eth0 entered promiscuous mode
  308. [ 10.534781] mt7530-mdio mdio-bus:00 lan2: configuring for phy/gmii link mode
  309. [ 10.544962] br-lan: port 2(lan2) entered blocking state
  310. [ 10.550206] br-lan: port 2(lan2) entered disabled state
  311. [ 10.557568] device lan2 entered promiscuous mode
  312. [ 10.571047] mt7530-mdio mdio-bus:00 lan3: configuring for phy/gmii link mode
  313. [ 10.581059] br-lan: port 3(lan3) entered blocking state
  314. [ 10.586351] br-lan: port 3(lan3) entered disabled state
  315. [ 10.594929] device lan3 entered promiscuous mode
  316. [ 10.611279] mt7530-mdio mdio-bus:00 lan4: configuring for phy/gmii link mode
  317. [ 10.624027] br-lan: port 4(lan4) entered blocking state
  318. [ 10.629274] br-lan: port 4(lan4) entered disabled state
  319. [ 10.638928] device lan4 entered promiscuous mode
  320. [ 10.659348] mt7530-mdio mdio-bus:00 wan: configuring for phy/gmii link mode
  321. [ 12.163737] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  322. [ 12.585902] mt7530-mdio mdio-bus:00 lan4: Link is Up - 10Mbps/Full - flow control off
  323. [ 12.913320] br-lan: port 2(lan2) entered blocking state
  324. [ 12.918574] br-lan: port 2(lan2) entered forwarding state
  325. [ 12.924188] br-lan: port 4(lan4) entered blocking state
  326. [ 12.929420] br-lan: port 4(lan4) entered forwarding state
  327. [ 12.936123] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  328. [ 13.564590] mt7530-mdio mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  329. [ 13.572518] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
  330. [ 13.636765] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  331. [ 14.063564] br-lan: port 5(wl1-ap0) entered blocking state
  332. [ 14.069085] br-lan: port 5(wl1-ap0) entered disabled state
  333. [ 14.074998] device wl1-ap0 entered promiscuous mode
  334. [ 14.080088] br-lan: port 5(wl1-ap0) entered blocking state
  335. [ 14.085619] br-lan: port 5(wl1-ap0) entered forwarding state
  336. [ 14.091566] br-lan: port 1(lan1) entered blocking state
  337. [ 14.096849] br-lan: port 1(lan1) entered forwarding state
  338. [ 14.103599] br-lan: port 5(wl1-ap0) entered disabled state
  339. [ 14.112500] device wl1-ap0 left promiscuous mode
  340. [ 14.117209] br-lan: port 5(wl1-ap0) entered disabled state
  341. [ 14.144951] br-lan: port 5(wl1-ap0) entered blocking state
  342. [ 14.150459] br-lan: port 5(wl1-ap0) entered disabled state
  343. [ 14.156232] device wl1-ap0 entered promiscuous mode
  344. [ 14.248170] br-lan: port 6(wl0-ap0) entered blocking state
  345. [ 14.253721] br-lan: port 6(wl0-ap0) entered disabled state
  346. [ 14.259453] device wl0-ap0 entered promiscuous mode
  347. [ 14.264619] br-lan: port 6(wl0-ap0) entered blocking state
  348. [ 14.270116] br-lan: port 6(wl0-ap0) entered forwarding state
  349. [ 15.091780] br-lan: port 6(wl0-ap0) entered disabled state
  350. [ 22.525798] IPv6: ADDRCONF(NETDEV_CHANGE): wl0-ap0: link becomes ready
  351. [ 22.532482] br-lan: port 6(wl0-ap0) entered blocking state
  352. [ 22.537976] br-lan: port 6(wl0-ap0) entered forwarding state
  353. [ 22.634893] br-lan: port 7(wl0-ap1) entered blocking state
  354. [ 22.640422] br-lan: port 7(wl0-ap1) entered disabled state
  355. [ 22.646470] device wl0-ap1 entered promiscuous mode
  356. [ 22.663266] br-lan: port 7(wl0-ap1) entered blocking state
  357. [ 22.668768] br-lan: port 7(wl0-ap1) entered forwarding state
  358. [ 22.677844] device wl0-ap1 left promiscuous mode
  359. [ 22.682609] br-lan: port 7(wl0-ap1) entered disabled state
  360. [ 22.714260] br-lan: port 7(wl0-ap1) entered blocking state
  361. [ 22.719770] br-lan: port 7(wl0-ap1) entered disabled state
  362. [ 22.725721] device wl0-ap1 entered promiscuous mode
  363. [ 22.730922] br-lan: port 7(wl0-ap1) entered blocking state
  364. [ 22.736480] br-lan: port 7(wl0-ap1) entered forwarding state
  365. [ 22.746288] IPv6: ADDRCONF(NETDEV_CHANGE): wl0-ap1: link becomes ready
  366. [ 23.130457] mt7530-mdio mdio-bus:00 lan1: Link is Down
  367. [ 23.135882] br-lan: port 1(lan1) entered disabled state
  368. [ 27.825105] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  369. [ 27.833134] br-lan: port 1(lan1) entered blocking state
  370. [ 27.838379] br-lan: port 1(lan1) entered forwarding state
  371. [ 32.342116] mt7530-mdio mdio-bus:00 lan1: Link is Down
  372. [ 32.347479] br-lan: port 1(lan1) entered disabled state
  373. [ 35.188221] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  374. [ 35.196254] br-lan: port 1(lan1) entered blocking state
  375. [ 35.201520] br-lan: port 1(lan1) entered forwarding state
  376. [ 35.940802] mt7530-mdio mdio-bus:00 lan1: Link is Down
  377. [ 35.946395] br-lan: port 1(lan1) entered disabled state
  378. [ 37.679969] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  379. [ 37.688084] br-lan: port 1(lan1) entered blocking state
  380. [ 37.693347] br-lan: port 1(lan1) entered forwarding state
  381. [ 53.339975] mt7530-mdio mdio-bus:00 lan1: Link is Down
  382. [ 53.346162] br-lan: port 1(lan1) entered disabled state
  383. [ 56.305957] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  384. [ 56.314075] br-lan: port 1(lan1) entered blocking state
  385. [ 56.319323] br-lan: port 1(lan1) entered forwarding state
  386. [ 96.314004] IPv6: ADDRCONF(NETDEV_CHANGE): wl1-ap0: link becomes ready
  387. [ 96.320769] br-lan: port 5(wl1-ap0) entered blocking state
  388. [ 96.326321] br-lan: port 5(wl1-ap0) entered forwarding state
  389. [ 103.344069] mt7530-mdio mdio-bus:00 lan1: Link is Down
  390. [ 103.349486] br-lan: port 1(lan1) entered disabled state
  391. [ 106.204093] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  392. [ 106.212136] br-lan: port 1(lan1) entered blocking state
  393. [ 106.217398] br-lan: port 1(lan1) entered forwarding state
  394. [ 114.494221] mt7530-mdio mdio-bus:00 lan1: Link is Down
  395. [ 114.500441] br-lan: port 1(lan1) entered disabled state
  396. [ 117.584813] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  397. [ 117.592875] br-lan: port 1(lan1) entered blocking state
  398. [ 117.598121] br-lan: port 1(lan1) entered forwarding state
  399. [13598.955923] mt7530-mdio mdio-bus:00 lan1: Link is Down
  400. [13598.961715] br-lan: port 1(lan1) entered disabled state
  401. [13600.539683] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  402. [13600.547763] br-lan: port 1(lan1) entered blocking state
  403. [13600.553037] br-lan: port 1(lan1) entered forwarding state
  404. [13614.580203] mt7530-mdio mdio-bus:00 lan1: Link is Down
  405. [13614.586262] br-lan: port 1(lan1) entered disabled state
  406. [13616.226710] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  407. [13616.234835] br-lan: port 1(lan1) entered blocking state
  408. [13616.240114] br-lan: port 1(lan1) entered forwarding state
  409. [13621.011151] mt7530-mdio mdio-bus:00 lan1: Link is Down
  410. [13621.017104] br-lan: port 1(lan1) entered disabled state
  411. [13624.041608] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  412. [13624.049722] br-lan: port 1(lan1) entered blocking state
  413. [13624.054965] br-lan: port 1(lan1) entered forwarding state
  414. [13646.703990] mt7530-mdio mdio-bus:00 lan1: Link is Down
  415. [13646.709398] br-lan: port 1(lan1) entered disabled state
  416. [13649.651804] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  417. [13649.659818] br-lan: port 1(lan1) entered blocking state
  418. [13649.665054] br-lan: port 1(lan1) entered forwarding state
  419. [13696.621340] mt7530-mdio mdio-bus:00 lan1: Link is Down
  420. [13696.626777] br-lan: port 1(lan1) entered disabled state
  421. [13699.697318] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  422. [13699.705368] br-lan: port 1(lan1) entered blocking state
  423. [13699.710651] br-lan: port 1(lan1) entered forwarding state
  424. [13706.557296] mt7530-mdio mdio-bus:00 lan1: Link is Down
  425. [13706.563413] br-lan: port 1(lan1) entered disabled state
  426. [13709.449780] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  427. [13709.457800] br-lan: port 1(lan1) entered blocking state
  428. [13709.463054] br-lan: port 1(lan1) entered forwarding state
  429. [184469.539944] mt7530-mdio mdio-bus:00 lan2: Link is Down
  430. [184469.545621] br-lan: port 2(lan2) entered disabled state
  431. [184472.534534] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  432. [184472.542659] br-lan: port 2(lan2) entered blocking state
  433. [184472.547989] br-lan: port 2(lan2) entered forwarding state
  434. [188097.270485] mt7530-mdio mdio-bus:00 wan: Link is Down
  435. [188112.078145] mt7530-mdio mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  436. [294434.531239] mt7530-mdio mdio-bus:00 lan4: Link is Down
  437. [294434.537270] br-lan: port 4(lan4) entered disabled state
  438. [294437.488649] mt7530-mdio mdio-bus:00 lan4: Link is Up - 10Mbps/Full - flow control off
  439. [294437.496719] br-lan: port 4(lan4) entered blocking state
  440. [294437.502090] br-lan: port 4(lan4) entered forwarding state
  441. [294438.643246] mt7530-mdio mdio-bus:00 lan4: Link is Down
  442. [294438.648823] br-lan: port 4(lan4) entered disabled state
  443. [294442.796928] mt7530-mdio mdio-bus:00 lan4: Link is Up - 10Mbps/Full - flow control off
  444. [294442.804942] br-lan: port 4(lan4) entered blocking state
  445. [294442.810304] br-lan: port 4(lan4) entered forwarding state
  446. [294451.211163] mt7530-mdio mdio-bus:00 lan4: Link is Down
  447. [294451.216649] br-lan: port 4(lan4) entered disabled state
  448. [294455.537911] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control off
  449. [294455.545858] br-lan: port 4(lan4) entered blocking state
  450. [294455.551256] br-lan: port 4(lan4) entered forwarding state
  451. [294459.402672] mt7530-mdio mdio-bus:00 lan4: Link is Down
  452. [294459.408281] br-lan: port 4(lan4) entered disabled state
  453. [294462.272202] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  454. [294462.280339] br-lan: port 4(lan4) entered blocking state
  455. [294462.285676] br-lan: port 4(lan4) entered forwarding state
  456. [294467.219437] mt7530-mdio mdio-bus:00 lan4: Link is Down
  457. [294467.225022] br-lan: port 4(lan4) entered disabled state
  458. [294473.054686] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  459. [294473.062872] br-lan: port 4(lan4) entered blocking state
  460. [294473.068268] br-lan: port 4(lan4) entered forwarding state
  461. [299001.060986] mt7530-mdio mdio-bus:00 lan4: Link is Down
  462. [299001.067472] br-lan: port 4(lan4) entered disabled state
  463. [299002.798810] mt7530-mdio mdio-bus:00 lan4: Link is Up - 10Mbps/Full - flow control off
  464. [299002.806881] br-lan: port 4(lan4) entered blocking state
  465. [299002.812239] br-lan: port 4(lan4) entered forwarding state
  466. [299012.233394] mt7530-mdio mdio-bus:00 lan4: Link is Down
  467. [299012.239595] br-lan: port 4(lan4) entered disabled state
  468. [299015.396675] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  469. [299015.404780] br-lan: port 4(lan4) entered blocking state
  470. [299015.410103] br-lan: port 4(lan4) entered forwarding state
  471. [299020.321662] mt7530-mdio mdio-bus:00 lan4: Link is Down
  472. [299020.327235] br-lan: port 4(lan4) entered disabled state
  473. [299026.008678] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  474. [299026.016831] br-lan: port 4(lan4) entered blocking state
  475. [299026.022169] br-lan: port 4(lan4) entered forwarding state
  476. [320107.582400] mt7530-mdio mdio-bus:00 lan2: Link is Down
  477. [320107.588001] br-lan: port 2(lan2) entered disabled state
  478. [320110.834452] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  479. [320110.842603] br-lan: port 2(lan2) entered blocking state
  480. [320110.848001] br-lan: port 2(lan2) entered forwarding state
  481. [337667.955644] mt7530-mdio mdio-bus:00 wan: Link is Down
  482. [337671.127579] mt7530-mdio mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  483. [337671.880025] mt7530-mdio mdio-bus:00 wan: Link is Down
  484. [337676.098670] mt7530-mdio mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  485. [337741.788318] mt7530-mdio mdio-bus:00 wan: Link is Down
  486. [337747.669872] mt7530-mdio mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  487. [337821.836940] mt7530-mdio mdio-bus:00 wan: Link is Down
  488. [337827.693478] mt7530-mdio mdio-bus:00 wan: Link is Up - 1Gbps/Full - flow control rx/tx
  489. [520238.672552] mt7530-mdio mdio-bus:00 lan2: Link is Down
  490. [520238.678168] br-lan: port 2(lan2) entered disabled state
  491. [520241.600851] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  492. [520241.609008] br-lan: port 2(lan2) entered blocking state
  493. [520241.614363] br-lan: port 2(lan2) entered forwarding state
  494. [717382.738562] mt7530-mdio mdio-bus:00 lan2: Link is Down
  495. [717382.744227] br-lan: port 2(lan2) entered disabled state
  496. [717385.613100] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  497. [717385.621422] br-lan: port 2(lan2) entered blocking state
  498. [717385.626810] br-lan: port 2(lan2) entered forwarding state
  499. [836575.069819] mt7530-mdio mdio-bus:00 lan2: Link is Down
  500. [836575.075538] br-lan: port 2(lan2) entered disabled state
  501. [836578.096722] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  502. [836578.104853] br-lan: port 2(lan2) entered blocking state
  503. [836578.110195] br-lan: port 2(lan2) entered forwarding state
  504. [843221.289220] mt7530-mdio mdio-bus:00 lan4: Link is Down
  505. [843221.295547] br-lan: port 4(lan4) entered disabled state
  506. [843222.915402] mt7530-mdio mdio-bus:00 lan4: Link is Up - 10Mbps/Full - flow control off
  507. [843222.923466] br-lan: port 4(lan4) entered blocking state
  508. [843222.928851] br-lan: port 4(lan4) entered forwarding state
  509. [843232.365012] mt7530-mdio mdio-bus:00 lan4: Link is Down
  510. [843232.371057] br-lan: port 4(lan4) entered disabled state
  511. [843235.374540] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  512. [843235.382657] br-lan: port 4(lan4) entered blocking state
  513. [843235.387978] br-lan: port 4(lan4) entered forwarding state
  514. [843240.390272] mt7530-mdio mdio-bus:00 lan4: Link is Down
  515. [843240.395742] br-lan: port 4(lan4) entered disabled state
  516. [843246.501350] mt7530-mdio mdio-bus:00 lan4: Link is Up - 1Gbps/Full - flow control rx/tx
  517. [843246.509545] br-lan: port 4(lan4) entered blocking state
  518. [843246.514883] br-lan: port 4(lan4) entered forwarding state
  519. [986998.963034] mt7530-mdio mdio-bus:00 lan1: Link is Down
  520. [986998.969462] br-lan: port 1(lan1) entered disabled state
  521. [987001.263004] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  522. [987001.271215] br-lan: port 1(lan1) entered blocking state
  523. [987001.276604] br-lan: port 1(lan1) entered forwarding state
  524. [987019.763730] mt7530-mdio mdio-bus:00 lan1: Link is Down
  525. [987019.769167] br-lan: port 1(lan1) entered disabled state
  526. [987022.746531] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  527. [987022.754683] br-lan: port 1(lan1) entered blocking state
  528. [987022.760017] br-lan: port 1(lan1) entered forwarding state
  529. [987069.682886] mt7530-mdio mdio-bus:00 lan1: Link is Down
  530. [987069.689088] br-lan: port 1(lan1) entered disabled state
  531. [987072.651087] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  532. [987072.659231] br-lan: port 1(lan1) entered blocking state
  533. [987072.664590] br-lan: port 1(lan1) entered forwarding state
  534. [987078.883519] mt7530-mdio mdio-bus:00 lan1: Link is Down
  535. [987078.888937] br-lan: port 1(lan1) entered disabled state
  536. [987081.811469] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  537. [987081.819545] br-lan: port 1(lan1) entered blocking state
  538. [987081.824912] br-lan: port 1(lan1) entered forwarding state
  539. [987082.802273] mt7530-mdio mdio-bus:00 lan2: Link is Down
  540. [987082.808472] br-lan: port 2(lan2) entered disabled state
  541. [987085.655650] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  542. [987085.663767] br-lan: port 2(lan2) entered blocking state
  543. [987085.669093] br-lan: port 2(lan2) entered forwarding state
  544. [987218.773987] mt7530-mdio mdio-bus:00 lan1: Link is Down
  545. [987218.780322] br-lan: port 1(lan1) entered disabled state
  546. [987220.360093] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  547. [987220.368286] br-lan: port 1(lan1) entered blocking state
  548. [987220.373657] br-lan: port 1(lan1) entered forwarding state
  549. [987230.772473] mt7530-mdio mdio-bus:00 lan1: Link is Down
  550. [987230.778673] br-lan: port 1(lan1) entered disabled state
  551. [987273.798884] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  552. [987273.807141] br-lan: port 1(lan1) entered blocking state
  553. [987273.812531] br-lan: port 1(lan1) entered forwarding state
  554. [987278.598097] mt7530-mdio mdio-bus:00 lan1: Link is Down
  555. [987278.604640] br-lan: port 1(lan1) entered disabled state
  556. [987280.234604] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  557. [987280.242845] br-lan: port 1(lan1) entered blocking state
  558. [987280.248176] br-lan: port 1(lan1) entered forwarding state
  559. [987304.276903] mt7530-mdio mdio-bus:00 lan1: Link is Down
  560. [987304.283595] br-lan: port 1(lan1) entered disabled state
  561. [987307.278991] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  562. [987307.287093] br-lan: port 1(lan1) entered blocking state
  563. [987307.292496] br-lan: port 1(lan1) entered forwarding state
  564. [987314.543912] mt7530-mdio mdio-bus:00 lan1: Link is Down
  565. [987314.549541] br-lan: port 1(lan1) entered disabled state
  566. [987317.297310] mt7530-mdio mdio-bus:00 lan1: Link is Up - 10Mbps/Full - flow control rx/tx
  567. [987317.305545] br-lan: port 1(lan1) entered blocking state
  568. [987317.310917] br-lan: port 1(lan1) entered forwarding state
  569. [987333.907121] mt7530-mdio mdio-bus:00 lan1: Link is Down
  570. [987333.912719] br-lan: port 1(lan1) entered disabled state
  571. [987337.057956] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  572. [987337.066091] br-lan: port 1(lan1) entered blocking state
  573. [987337.071472] br-lan: port 1(lan1) entered forwarding state
  574. [987384.008232] mt7530-mdio mdio-bus:00 lan1: Link is Down
  575. [987384.013706] br-lan: port 1(lan1) entered disabled state
  576. [987386.958495] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  577. [987386.966618] br-lan: port 1(lan1) entered blocking state
  578. [987386.971986] br-lan: port 1(lan1) entered forwarding state
  579. [987392.932736] mt7530-mdio mdio-bus:00 lan1: Link is Down
  580. [987392.938310] br-lan: port 1(lan1) entered disabled state
  581. [987395.932756] mt7530-mdio mdio-bus:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
  582. [987395.940913] br-lan: port 1(lan1) entered blocking state
  583. [987395.946254] br-lan: port 1(lan1) entered forwarding state
  584. [1024407.047000] br-lan: port 4(lan4) entered disabled state
  585. [1024407.053233] mt7530-mdio mdio-bus:00 lan4: Link is Down
  586. [1024408.712457] mt7530-mdio mdio-bus:00 lan4: Link is Up - 10Mbps/Full - flow control rx/tx
  587. [1024408.720814] br-lan: port 4(lan4) entered blocking state
  588. [1024408.726288] br-lan: port 4(lan4) entered forwarding state
  589. [1126992.994422] mt7530-mdio mdio-bus:00 lan2: Link is Down
  590. [1126993.000114] br-lan: port 2(lan2) entered disabled state
  591. [1126996.010710] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  592. [1126996.018909] br-lan: port 2(lan2) entered blocking state
  593. [1126996.024373] br-lan: port 2(lan2) entered forwarding state
  594. [1270236.924371] mt7530-mdio mdio-bus:00 lan2: Link is Down
  595. [1270236.930660] br-lan: port 2(lan2) entered disabled state
  596. [1270239.832218] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  597. [1270239.840430] br-lan: port 2(lan2) entered blocking state
  598. [1270239.845853] br-lan: port 2(lan2) entered forwarding state
  599. [1293884.667535] mt7530-mdio mdio-bus:00 lan2: Link is Down
  600. [1293884.673340] br-lan: port 2(lan2) entered disabled state
  601. [1293887.845556] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  602. [1293887.853759] br-lan: port 2(lan2) entered blocking state
  603. [1293887.859248] br-lan: port 2(lan2) entered forwarding state
  604. [1400193.612233] mt7530-mdio mdio-bus:00 lan2: Link is Down
  605. [1400193.617942] br-lan: port 2(lan2) entered disabled state
  606. [1400196.487562] mt7530-mdio mdio-bus:00 lan2: Link is Up - 100Mbps/Full - flow control off
  607. [1400196.495875] br-lan: port 2(lan2) entered blocking state
  608. [1400196.501363] br-lan: port 2(lan2) entered forwarding state
  609. [1571967.223481] ------------[ cut here ]------------
  610. [1571967.228291] Timeout waiting for MCU reset state 8
  611. [1571967.233234] WARNING: CPU: 1 PID: 26709 at 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  612. [1571967.242133] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7915e mt7615e mt7615_common mt76_connac_lib mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c hwmon crc_ccitt compat seqiv leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd gpio_button_hotplug usbcore usb_common
  613. [1571967.303503] CPU: 1 PID: 26709 Comm: kworker/u4:1 Tainted: G S 5.15.137 #0
  614. [1571967.311764] Hardware name: Linksys E8450 (UBI) (DT)
  615. [1571967.316808] Workqueue: mt76 0xffffffc000a0f334 [mt7915e@000000006012e1c9+0x1f000]
  616. [1571967.324474] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  617. [1571967.331603] pc : 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  618. [1571967.338298] lr : 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  619. [1571967.344993] sp : ffffffc00f063c50
  620. [1571967.348472] x29: ffffffc00f063c50 x28: ffffff8002701ec0 x27: ffffff80027025f8
  621. [1571967.355779] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff8002702020
  622. [1571967.363084] x23: 0000000000000000 x22: ffffff8002706020 x21: 0000000000000008
  623. [1571967.370391] x20: ffffff8002709ee0 x19: 0000000000000000 x18: ffffffc008a3a2b8
  624. [1571967.377697] x17: 6000545200000000 x16: 0000000000000000 x15: 0000000000000720
  625. [1571967.385002] x14: 0000000000000260 x13: ffffffc00f063988 x12: ffffffc008a922b8
  626. [1571967.392311] x11: 4d20726f6620676e x10: ffffffc008a922b8 x9 : 0000000000000000
  627. [1571967.399619] x8 : ffffffc008a3a268 x7 : ffffffc008a3a2b8 x6 : 0000000000000001
  628. [1571967.406924] x5 : ffffff801feb36f8 x4 : 0000000000000000 x3 : 0000000000000027
  629. [1571967.414229] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000025
  630. [1571967.421536] Call trace:
  631. [1571967.424149] 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  632. [1571967.430503] 0xffffffc000a0f514 [mt7915e@000000006012e1c9+0x1f000]
  633. [1571967.436852] 0xffffffc008050790
  634. [1571967.440160] 0xffffffc008050aa0
  635. [1571967.443467] 0xffffffc008058c7c
  636. [1571967.446774] 0xffffffc00801581c
  637. [1571967.450082] ---[ end trace 29f27fab904c316e ]---
  638. [1571997.943049] ------------[ cut here ]------------
  639. [1571997.947864] Timeout waiting for MCU reset state 20
  640. [1571997.952880] WARNING: CPU: 1 PID: 26709 at 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  641. [1571997.961770] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7915e mt7615e mt7615_common mt76_connac_lib mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c hwmon crc_ccitt compat seqiv leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd gpio_button_hotplug usbcore usb_common
  642. [1571998.023176] CPU: 1 PID: 26709 Comm: kworker/u4:1 Tainted: G S W 5.15.137 #0
  643. [1571998.031435] Hardware name: Linksys E8450 (UBI) (DT)
  644. [1571998.036479] Workqueue: mt76 0xffffffc000a0f334 [mt7915e@000000006012e1c9+0x1f000]
  645. [1571998.044143] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  646. [1571998.051272] pc : 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  647. [1571998.057968] lr : 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  648. [1571998.064665] sp : ffffffc00f063c50
  649. [1571998.068145] x29: ffffffc00f063c50 x28: ffffff8002701ec0 x27: ffffff80027025f8
  650. [1571998.075453] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff8002702020
  651. [1571998.082759] x23: 0000000000000000 x22: ffffff8002706020 x21: 0000000000000020
  652. [1571998.090063] x20: ffffff8002709ee0 x19: 0000000000000000 x18: ffffffc008a3a2b8
  653. [1571998.097368] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000777
  654. [1571998.104673] x14: 000000000000027d x13: ffffffc00f063988 x12: ffffffc008a922b8
  655. [1571998.111978] x11: 434d20726f662067 x10: ffffffc008a922b8 x9 : 0000000000000000
  656. [1571998.119283] x8 : ffffffc008a3a268 x7 : ffffffc008a3a2b8 x6 : 0000000000000001
  657. [1571998.126588] x5 : ffffff801feb36f8 x4 : 0000000000000000 x3 : 0000000000000027
  658. [1571998.133893] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026
  659. [1571998.141199] Call trace:
  660. [1571998.143810] 0xffffffc000a0d278 [mt7915e@000000006012e1c9+0x1f000]
  661. [1571998.150163] 0xffffffc000a0f544 [mt7915e@000000006012e1c9+0x1f000]
  662. [1571998.156511] 0xffffffc008050790
  663. [1571998.159817] 0xffffffc008050aa0
  664. [1571998.163122] 0xffffffc008058c7c
  665. [1571998.166429] 0xffffffc00801581c
  666. [1571998.169736] ---[ end trace 29f27fab904c316f ]---
  667. [1572018.422796] mt7915e 0000:01:00.0: Message 000026ed (seq 13) timeout
  668. [1572038.902539] mt7915e 0000:01:00.0: Message 00005aed (seq 14) timeout
  669. [1572059.382248] mt7915e 0000:01:00.0: Message 000025ed (seq 15) timeout
  670. [1572059.388838] ------------[ cut here ]------------
  671. [1572059.393637] WARNING: CPU: 1 PID: 27894 at 0xffffffc0009521c0 [mac80211@000000002a594a50+0x83000]
  672. [1572059.402619] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_ipv6 nf_flow_table_ipv4 nf_flow_table_inet pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_objref nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_counter nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mt7915e mt7615e mt7615_common mt76_connac_lib mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c hwmon crc_ccitt compat seqiv leds_gpio xhci_plat_hcd xhci_pci xhci_mtk_hcd xhci_hcd gpio_button_hotplug usbcore usb_common
  673. [1572059.464026] CPU: 1 PID: 27894 Comm: kworker/u4:0 Tainted: G S W 5.15.137 #0
  674. [1572059.472288] Hardware name: Linksys E8450 (UBI) (DT)
  675. [1572059.477331] Workqueue: phy1 0xffffffc000950870 [mac80211@000000002a594a50+0x83000]
  676. [1572059.485081] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  677. [1572059.492211] pc : 0xffffffc0009521c0 [mac80211@000000002a594a50+0x83000]
  678. [1572059.498994] lr : 0xffffffc000952088 [mac80211@000000002a594a50+0x83000]
  679. [1572059.505776] sp : ffffffc00f95bc80
  680. [1572059.509254] x29: ffffffc00f95bc80 x28: ffffffc008b01000 x27: 0000000000000001
  681. [1572059.516559] x26: ffffff8001f0dc00 x25: ffffff8002700880 x24: ffffffc008b01000
  682. [1572059.523864] x23: ffffffc000950d58 x22: ffffff800273c0e8 x21: 0000000000000001
  683. [1572059.531170] x20: ffffff8002792800 x19: ffffff800273a000 x18: ffffffc008a3a2b8
  684. [1572059.538475] x17: 00000000a6d5a94b x16: e61810d49cad17d9 x15: 00000000000007d1
  685. [1572059.545779] x14: 000000000000029b x13: ffffffc00f95b788 x12: ffffffc008a922b8
  686. [1572059.553084] x11: 0000000000000040 x10: ffffffc008a37818 x9 : ffffffc008a37810
  687. [1572059.560390] x8 : ffffff8000400948 x7 : 0000000000000000 x6 : 000011d98f5d07a6
  688. [1572059.567698] x5 : 0000000000000000 x4 : ffffffc008a28000 x3 : 0000000000000000
  689. [1572059.575005] x2 : 0000000000000001 x1 : 0000000000000002 x0 : 00000000ffffff92
  690. [1572059.582313] Call trace:
  691. [1572059.584924] 0xffffffc0009521c0 [mac80211@000000002a594a50+0x83000]
  692. [1572059.591365] 0xffffffc000950d58 [mac80211@000000002a594a50+0x83000]
  693. [1572059.597805] 0xffffffc008050790
  694. [1572059.601112] 0xffffffc008050aa0
  695. [1572059.604418] 0xffffffc008058c7c
  696. [1572059.607724] 0xffffffc00801581c
  697. [1572059.611031] ---[ end trace 29f27fab904c3170 ]---
  698. [1572079.861967] mt7915e 0000:01:00.0: Message 000026ed (seq 1) timeout
  699. [1572100.341726] mt7915e 0000:01:00.0: Message 00005aed (seq 2) timeout
  700. [1572120.821406] mt7915e 0000:01:00.0: Message 0000aded (seq 3) timeout
  701. [1572141.301122] mt7915e 0000:01:00.0: Message 000800c4 (seq 4) timeout
  702. [1572161.780867] mt7915e 0000:01:00.0: Message 00005aed (seq 5) timeout
  703. [1572182.260574] mt7915e 0000:01:00.0: Message 0000aded (seq 6) timeout
  704. [1572202.740296] mt7915e 0000:01:00.0: Message 000800c4 (seq 7) timeout
  705. [1572223.220033] mt7915e 0000:01:00.0: Message 00005aed (seq 8) timeout
  706. [1572243.699902] mt7915e 0000:01:00.0: Message 0000aded (seq 9) timeout
  707. [1572264.179488] mt7915e 0000:01:00.0: Message 000800c4 (seq 10) timeout
  708. [1572284.669197] mt7915e 0000:01:00.0: Message 00005aed (seq 11) timeout
  709. [1572305.138911] mt7915e 0000:01:00.0: Message 00005aed (seq 12) timeout
  710. [1572325.618649] mt7915e 0000:01:00.0: Message 00005aed (seq 13) timeout
  711. [1572346.098693] mt7915e 0000:01:00.0: Message 000026ed (seq 14) timeout
  712. [1572366.578107] mt7915e 0000:01:00.0: Message 00005aed (seq 15) timeout
  713. [1572387.057842] mt7915e 0000:01:00.0: Message 0000aded (seq 1) timeout
  714. [1572407.537565] mt7915e 0000:01:00.0: Message 000800c4 (seq 2) timeout
  715. [1572428.017260] mt7915e 0000:01:00.0: Message 00005aed (seq 3) timeout
  716. [1572448.497354] mt7915e 0000:01:00.0: Message 0000aded (seq 4) timeout
  717. [1572468.976734] mt7915e 0000:01:00.0: Message 000800c4 (seq 5) timeout
  718. [1572489.456437] mt7915e 0000:01:00.0: Message 00005aed (seq 6) timeout
  719. [1572509.936152] mt7915e 0000:01:00.0: Message 0000aded (seq 7) timeout
  720. [1572530.415872] mt7915e 0000:01:00.0: Message 000800c4 (seq 8) timeout
  721. [1572550.895620] mt7915e 0000:01:00.0: Message 00005aed (seq 9) timeout
  722. [1572571.375418] mt7915e 0000:01:00.0: Message 00005aed (seq 10) timeout
  723. [1572591.855165] mt7915e 0000:01:00.0: Message 00005aed (seq 11) timeout
  724. [1572612.334797] mt7915e 0000:01:00.0: Message 0000aded (seq 12) timeout
  725. [1572632.814516] mt7915e 0000:01:00.0: Message 000800c4 (seq 13) timeout
  726. [1572653.294247] mt7915e 0000:01:00.0: Message 00005aed (seq 14) timeout
  727. [1572673.773956] mt7915e 0000:01:00.0: Message 0000aded (seq 15) timeout
  728. [1572694.253690] mt7915e 0000:01:00.0: Message 000800c4 (seq 1) timeout
  729.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!