Advertisement
droidbox

T8-S M8 uboot

Jan 16th, 2016
109
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 1.76 KB | None | 0 0
  1. =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.01.16 13:43:24 =~=~=~=~=~=~=~=~=~=~=~=
  2. j
  3. TE : 245320
  4. BT : 10:01:17 May 6 2014
  5. DCDC01 set to 1050, register from 0x0018 to 0x0024, addr:0x0036
  6. DCDC02 set to 1150, register from 0x0018 to 0x002c, addr:0x0037
  7. CONFIG_DDR_VOLTAGE: 1500!!DCDC03 set to 1500, register from 0x0038 to 0x0048, addr:0x0038
  8. LDO54 set to 1, register from 0x004e to 0x0050, addr:0x004c
  9. LDO08 set to 2, register from 0x0024 to 0x0024, addr:0x004d
  10. LDO08 set to 3, register from 0x0030 to 0x0030, addr:0x004e
  11. LDO22 set to 4, register from 0x004e to 0x004e, addr:0x004f
  12. LDO08 set to 5, register from 0x0024 to 0x0024, addr:0x0050
  13. LDO8c set to 10, register from 0x0028 to 0x0028, addr:0x0056
  14. LDO84 set to 11, register from 0x0000 to 0x0000, addr:0x0057
  15.  
  16. CPU clock is 792MHz
  17.  
  18. Aml log : DDR0 - init pass with
  19. PGSR0 : 0xc0000fff
  20. Aml log : DDR1 - init pass with
  21. PGSR0 : 0xc0000fff
  22.  
  23. DDR check pass!
  24.  
  25. DDR init use : 14904 us
  26.  
  27. HHH
  28. Start load M8 SMP code!
  29. Load M8 SMP code finished!
  30. 0x0000008d
  31. check SD_boot_type:0x1 card_type:0x1
  32. ucl decompress...pass
  33. 0x12345678
  34. Boot from external device
  35. TE : 608174
  36.  
  37. System Started
  38.  
  39.  
  40. U-boot(m8_k200_v1@86a84dc8) (May 06 2014 - 10:01:04)
  41.  
  42. clr h-ram
  43. DRAM: 2 GiB
  44. relocation Offset is: 6fec8000
  45. show partition table:
  46. part: 0, name : logo, size : 2000000
  47. part: 1, name : recovery, size : 2000000
  48. part: 2, name : misc, size : 2000000
  49. part: 3, name : boot, size : 2000000
  50. part: 4, name : system, size : 40000000
  51. part: 5, name : cache, size : 20000000
  52. part: 6, name : data, size : end
  53. aml_card_type=0x100
  54. MMC: [mmc_register] add mmc dev_num=0, port=1, if_type=6
  55. [mmc_register] add mmc dev_num=1, port=2, if_type=6
  56. SDIO Port B: 0, SDIO Port C: 1
  57. (GPIOZ_0-0 : GPIODV_29-1)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement