Advertisement
Guest User

Untitled

a guest
Dec 30th, 2020
78
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.92 KB | None | 0 0
  1. Please Input new setting /or enter to choose the default setting
  2. Input kernel file name (openwrt-mtkarm-squashfs-trx-update.bin) ==:
  3. Input server IP (192.168.11.2) ==:
  4. Input device IP (192.168.11.1) ==:
  5. ETH already turn on and power on flow will be skipped...
  6.  
  7. Waitting for RX_DMA_BUSY status Start... done
  8.  
  9. rtk_switch_init ret = 0!!!!!!!!!!!!
  10. rtk_switch reg = 0x5678 !!!!!!!!!!!!
  11. Set RTL8367S SGMII 2.5Gbps
  12. rtk_port_macForceLinkExt_set return value is 0
  13. rtk_port_sgmiiNway_set return value is 0
  14. 0x1b000014 = 0x00110114
  15. Using mtk_eth device
  16. TFTP from server 192.168.11.2; our IP address is 192.168.11.1
  17. Filename 'openwrt-mtkarm-squashfs-trx-update.bin'.
  18. Load address: 0x4007ff28
  19. Loading: T #################################################################
  20. #################################################################
  21. #################################################################
  22. #################################################################
  23. #################################################################
  24. #################################################################
  25. #################################################################
  26. #################################################################
  27. #################################################################
  28. #########################################
  29. 1.6 MiB/s
  30. done
  31. Bytes transferred = 9175040 (8c0000 hex)
  32. get filesize 0x8c0000
  33. [do_filesize_check ]partition_size: 0x2000000 ,, filesize: 0x8c0000
  34. [do_read_image_blks]This is a FIT image,img_size = 0x2f45f0
  35. [do_read_image_blks]img_blks = 0x18
  36. [do_read_image_blks]img_align_size = 0x300000
  37.  
  38. NAND erase.spread: device 0 offset 0x200000, size 0x8c0000
  39. Erasing at 0xaa0000 -- 100% complete.
  40. OK
  41. [do_read_image_blks]This is a FIT image,img_size = 0x2f45f0
  42. [do_read_image_blks]img_blks = 0x5e9
  43. [do_read_image_blks]img_align_size = 0x2f4800
  44.  
  45. NAND write: device 0 offset 0x200000, size 0x8c0000
  46. 9175040 bytes written: OK
  47.  
  48. NAND read: device 0 offset 0x200000, size 0x2000
  49. 8192 bytes read: OK
  50. [do_read_image_blks]This is a FIT image,img_size = 0x2f45f0
  51. [do_read_image_blks]img_blks = 0x5e9
  52. [do_read_image_blks]img_align_size = 0x2f4800
  53.  
  54. NAND read: device 0 offset 0x200000, size 0x2f4800
  55. 3098624 bytes read: OK
  56. bootm flag=0, states=70f
  57. Original load address = 0x4007ff28
  58. After skip trx_header, load address = 0x4007ff44
  59.  
  60. ## Loading kernel from FIT Image at 4007ff44 ...
  61. Using 'config@1' configuration
  62. Trying 'kernel@1' kernel subimage
  63. Description: ARM64 OpenWrt Linux-5.4.85
  64. Type: Kernel Image
  65. Compression: lzma compressed
  66. Data Start: 0x4008002c
  67. Data Size: 3073416 Bytes = 2.9 MiB
  68. Architecture: AArch64
  69. OS: Linux
  70. Load Address: 0x44080000
  71. Entry Point: 0x44080000
  72. Hash algo: crc32
  73. Hash value: 0af45bea
  74. Hash algo: sha1
  75. Hash value: 128a959aa05854de77979d3990aca1af7b03e374
  76. Verifying Hash Integrity ... crc32+ sha1+ OK
  77. ## Loading fdt from FIT Image at 4007ff44 ...
  78. Using 'config@1' configuration
  79. Trying 'fdt@1' fdt subimage
  80. Description: ARM64 OpenWrt buffalo_wsr-2533dhp2 device tree blob
  81. Type: Flat Device Tree
  82. Compression: uncompressed
  83. Data Start: 0x4036e6f8
  84. Data Size: 22790 Bytes = 22.3 KiB
  85. Architecture: AArch64
  86. Hash algo: crc32
  87. Hash value: 57b9a5e2
  88. Hash algo: sha1
  89. Hash value: 9ed3cfdfa0654a6511310cdd69d465e105bab3f5
  90. Verifying Hash Integrity ... crc32+ sha1+ OK
  91. Booting using the fdt blob at 0x4036e6f8
  92. Uncompressing Kernel Image ... OK
  93. Loading Device Tree to 4cf45000, end 4cf4d905 ... OK
  94.  
  95. Starting kernel ...
  96.  
  97. [ATF][ 17.192017]save kernel info
  98. [ATF][ 17.195048]Kernel_EL2
  99. [ATF][ 17.197804]Kernel is 64Bit
  100. [ATF][ 17.200992]pc=0x44080000, r0=0x4cf45000, r1=0x0
  101. INFO: BL3-1: Preparing for EL3 exit to normal world, Kernel
  102. INFO: BL3-1: Next image address = 0x44080000
  103. INFO: BL3-1: Next image spsr = 0x3c9
  104. [ATF][ 17.219260]el3_exit
  105. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  106. [ 0.000000] Linux version 5.4.85 (hauke@hauke-t480) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r14353-4841ac042e00)) #0 SMP Tue Dec 29 20:42:29 2020
  107. [ 0.000000] Machine model: Buffalo WSR-2533DHP2
  108. [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
  109. [ 0.000000] printk: bootconsole [uart8250] enabled
  110. [ 0.000000] On node 0 totalpages: 65488
  111. [ 0.000000] DMA32 zone: 1024 pages used for memmap
  112. [ 0.000000] DMA32 zone: 0 pages reserved
  113. [ 0.000000] DMA32 zone: 65488 pages, LIFO batch:15
  114. [ 0.000000] psci: probing for conduit method from DT.
  115. [ 0.000000] psci: PSCIv0.2 detected in firmware.
  116. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  117. [ 0.000000] psci: Trusted OS migration not required
  118. [ 0.000000] percpu: Embedded 20 pages/cpu s43736 r8192 d29992 u81920
  119. [ 0.000000] pcpu-alloc: s43736 r8192 d29992 u81920 alloc=20*4096
  120. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  121. [ 0.000000] Detected VIPT I-cache on CPU0
  122. [ 0.000000] CPU features: detected: ARM erratum 845719
  123. [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
  124. [ 0.000000] CPU features: detected: ARM erratum 843419
  125. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64464
  126. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512
  127. [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
  128. [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
  129. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  130. [ 0.000000] Memory: 235016K/261952K available (6334K kernel code, 408K rwdata, 1840K rodata, 384K init, 289K bss, 26936K reserved, 0K cma-reserved)
  131. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  132. [ 0.000000] rcu: Hierarchical RCU implementation.
  133. [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
  134. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  135. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  136. [ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
  137. [ 0.000000] random: get_random_bytes called from start_kernel+0x2d4/0x434 with crng_init=0
  138. [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
  139. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  140. [ 0.000003] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  141. [ 0.008466] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=50000)
  142. [ 0.019105] pid_max: default: 32768 minimum: 301
  143. [ 0.023956] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
  144. [ 0.031442] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
  145. [ 0.040238] ASID allocator initialised with 65536 entries
  146. [ 0.045887] rcu: Hierarchical SRCU implementation.
  147. [ 0.051105] smp: Bringing up secondary CPUs ...
  148. [ 0.056109] Detected VIPT I-cache on CPU1
  149. [ 0.056142] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  150. [ 0.056192] smp: Brought up 1 node, 2 CPUs
  151. [ 0.071348] SMP: Total of 2 processors activated.
  152. [ 0.076218] CPU features: detected: 32-bit EL0 Support
  153. [ 0.081539] CPU features: detected: CRC32 instructions
  154. [ 0.086920] CPU: All CPU(s) started at EL2
  155. [ 0.091167] alternatives: patching kernel code
  156. [ 0.098382] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  157. [ 0.108494] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  158. [ 0.115616] pinctrl core: initialized pinctrl subsystem
  159. [ 0.121494] NET: Registered protocol family 16
  160. [ 0.126279] DMA: preallocated 256 KiB pool for atomic allocations
  161. [ 0.152746] SCSI subsystem initialized
  162. [ 0.156874] libata version 3.00 loaded.
  163. [ 0.161095] usbcore: registered new interface driver usbfs
  164. [ 0.166814] usbcore: registered new interface driver hub
  165. [ 0.172344] usbcore: registered new device driver usb
  166. [ 0.178007] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
  167. [ 0.188779] clocksource: Switched to clocksource arch_sys_counter
  168. [ 0.195565] thermal_sys: Registered thermal governor 'fair_share'
  169. [ 0.195568] thermal_sys: Registered thermal governor 'bang_bang'
  170. [ 0.201890] thermal_sys: Registered thermal governor 'step_wise'
  171. [ 0.208112] thermal_sys: Registered thermal governor 'user_space'
  172. [ 0.214334] thermal_sys: Registered thermal governor 'power_allocator'
  173. [ 0.220904] NET: Registered protocol family 2
  174. [ 0.232428] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
  175. [ 0.241094] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
  176. [ 0.249132] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
  177. [ 0.256551] TCP: Hash tables configured (established 2048 bind 2048)
  178. [ 0.263189] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
  179. [ 0.269964] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
  180. [ 0.277260] NET: Registered protocol family 1
  181. [ 0.281787] PCI: CLS 0 bytes, default 64
  182. [ 0.286653] workingset: timestamp_bits=46 max_order=16 bucket_order=0
  183. [ 0.295800] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  184. [ 0.301862] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  185. [ 0.327183] mt-pmic-pwrap 10001000.pwrap: unexpected interrupt int=0x1
  186. [ 0.341136] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  187. [ 0.348342] printk: console [ttyS0] disabled
  188. [ 0.373092] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 116, base_baud = 1562500) is a ST16650V2
  189. [ 0.382658] printk: console [ttyS0] enabled
  190. [ 0.382658] printk: console [ttyS0] enabled
  191. [ 0.391024] printk: bootconsole [uart8250] disabled
  192. [ 0.391024] printk: bootconsole [uart8250] disabled
  193. [ 0.401214] cacheinfo: Unable to detect cache hierarchy for CPU 0
  194. [ 0.407690] mtk-ecc 1100e000.ecc: probed
  195. [ 0.412467] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xa1
  196. [ 0.418817] nand: Winbond W29N01HZ
  197. [ 0.422215] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  198. [ 0.429783] mtk-nand 1100d000.nfi: eccsize 512 eccstrength 4
  199. [ 0.435445] Scanning device for bad blocks
  200. [ 0.547286] random: fast init done
  201. [ 0.875408] 9 fixed-partitions partitions found on MTD device mtk-nand
  202. [ 0.881932] Creating 9 MTD partitions on "mtk-nand":
  203. [ 0.886894] 0x000000000000-0x000000080000 : "Preloader"
  204. [ 0.892561] 0x000000080000-0x0000000c0000 : "ATF"
  205. [ 0.897618] 0x0000000c0000-0x000000140000 : "Bootloader"
  206. [ 0.903264] 0x000000140000-0x0000001c0000 : "Config"
  207. [ 0.908573] 0x0000001c0000-0x000000200000 : "factory"
  208. [ 0.913963] 0x000000200000-0x000003c00000 : "firmware"
  209. [ 0.919937] 2 trx-fw partitions found on MTD device firmware
  210. [ 0.925596] Creating 2 MTD partitions on "firmware":
  211. [ 0.930558] 0x00000000001c-0x000000400000 : "kernel"
  212. [ 0.935875] 0x000000400000-0x000003a00000 : "rootfs"
  213. [ 0.941423] mtd: device 7 (rootfs) set to be root filesystem
  214. [ 0.947266] mtdsplit: no squashfs found in "rootfs", but: 0x23494255
  215. [ 0.953623] 0x000003c00000-0x000007600000 : "Kernel2"
  216. [ 0.959327] 0x000007600000-0x000007800000 : "glbcfg"
  217. [ 0.964647] 0x000007800000-0x000007a00000 : "board_data"
  218. [ 0.970809] libphy: Fixed MDIO Bus: probed
  219. [ 0.998238] libphy: mdio: probed
  220. [ 1.002268] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xffffffc011380000, irq 124
  221. [ 1.011785] mtk-thermal 1100b000.thermal: Device not calibrated, using default calibration values
  222. [ 1.020983] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
  223. [ 1.031460] NET: Registered protocol family 10
  224. [ 1.036446] Segment Routing with IPv6
  225. [ 1.040149] NET: Registered protocol family 17
  226. [ 1.044662] 8021q: 802.1Q VLAN Support v1.8
  227. [ 1.058195] mtk-pcie 1a143000.pcie: host bridge /pcie@1a143000 ranges:
  228. [ 1.064747] mtk-pcie 1a143000.pcie: Parsing ranges property...
  229. [ 1.070588] mtk-pcie 1a143000.pcie: MEM 0x20000000..0x27ffffff -> 0x20000000
  230. [ 1.094519] mtk-pcie 1a143000.pcie: PCI host bridge to bus 0000:00
  231. [ 1.100702] pci_bus 0000:00: root bus resource [bus 00-ff]
  232. [ 1.106184] pci_bus 0000:00: root bus resource [mem 0x20000000-0x27ffffff]
  233. [ 1.113054] pci_bus 0000:00: scanning bus
  234. [ 1.117087] pci 0000:00:00.0: [14c3:3258] type 01 class 0x060400
  235. [ 1.123130] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x1ffffffff 64bit pref]
  236. [ 1.131723] pci_bus 0000:00: fixups for bus
  237. [ 1.135907] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 0
  238. [ 1.142603] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  239. [ 1.150611] pci 0000:00:00.0: scanning [bus 00-00] behind bridge, pass 1
  240. [ 1.157389] pci_bus 0000:01: scanning bus
  241. [ 1.161520] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
  242. [ 1.167748] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
  243. [ 1.175479] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
  244. [ 1.201827] pci_bus 0000:01: fixups for bus
  245. [ 1.206011] pci_bus 0000:01: bus scan returning with max=01
  246. [ 1.211582] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
  247. [ 1.218194] pci_bus 0000:00: bus scan returning with max=01
  248. [ 1.223775] pci 0000:00:00.0: BAR 0: no space for [mem size 0x200000000 64bit pref]
  249. [ 1.231427] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x200000000 64bit pref]
  250. [ 1.239426] pci 0000:00:00.0: BAR 8: assigned [mem 0x20000000-0x200fffff]
  251. [ 1.246211] pci 0000:01:00.0: BAR 0: assigned [mem 0x20000000-0x200fffff 64bit]
  252. [ 1.253598] pci 0000:00:00.0: PCI bridge to [bus 01]
  253. [ 1.258564] pci 0000:00:00.0: bridge window [mem 0x20000000-0x200fffff]
  254. [ 1.265414] pcieport 0000:00:00.0: of_irq_parse_pci: failed with rc=-22
  255. [ 1.272024] pcieport 0000:00:00.0: assign IRQ: got 0
  256. [ 1.276992] pcieport 0000:00:00.0: enabling device (0000 -> 0002)
  257. [ 1.283094] pcieport 0000:00:00.0: enabling bus mastering
  258. [ 1.288749] mtk_hsdma 1b007000.dma-controller: Using 3 as missing dma-requests property
  259. [ 1.296910] mtk_hsdma 1b007000.dma-controller: MediaTek HSDMA driver registered
  260. [ 2.510372] [rtl8367s_swconfig_init]
  261. [ 2.514225] hctosys: unable to open rtc device (rtc0)
  262. [ 2.520509] List of all partitions:
  263. [ 2.524008] 1f00 512 mtdblock0
  264. [ 2.524009] (driver?)
  265. [ 2.530543] 1f01 256 mtdblock1
  266. [ 2.530544] (driver?)
  267. [ 2.537077] 1f02 512 mtdblock2
  268. [ 2.537078] (driver?)
  269. [ 2.543605] 1f03 512 mtdblock3
  270. [ 2.543606] (driver?)
  271. [ 2.550138] 1f04 256 mtdblock4
  272. [ 2.550139] (driver?)
  273. [ 2.556667] 1f05 59392 mtdblock5
  274. [ 2.556668] (driver?)
  275. [ 2.563196] 1f06 4095 mtdblock6
  276. [ 2.563197] (driver?)
  277. [ 2.569728] 1f07 55296 mtdblock7
  278. [ 2.569729] (driver?)
  279. [ 2.576257] 1f08 59392 mtdblock8
  280. [ 2.576258] (driver?)
  281. [ 2.582790] 1f09 2048 mtdblock9
  282. [ 2.582791] (driver?)
  283. [ 2.589323] 1f0a 2048 mtdblock10
  284. [ 2.589324] (driver?)
  285. [ 2.595934] No filesystem could mount root, tried:
  286. [ 2.595936] squashfs
  287. [ 2.600806]
  288. [ 2.604550] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(31,7)
  289. [ 2.612892] SMP: stopping secondary CPUs
  290. [ 2.616805] Kernel Offset: disabled
  291. [ 2.620284] CPU features: 0x0002,04002004
  292. [ 2.624282] Memory Limit: none
  293. [ 2.627327] Rebooting in 1 seconds..
  294.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement