Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2010.12 (Mar 17 2014 - 10:44:11) for Willow
- CPU: S5PC220 [Samsung SOC on SMP Platform Base on ARM CortexA9]
- APLL = 1000MHz, MPLL = 800MHz
- DRAM: 1023 MiB
- HW_VERSION: [WILLOW_HW_RESERVED2]
- vol_arm: 30
- vol_int: 2A
- vol_g3d: 28
- vol_mif: 7
- buck1_ctrl: 9
- buck2_ctrl: 52
- buck3_ctrl: 52
- buck4_ctrl: 52
- int1msk(0x04): FF
- status1(0x06): 10
- pwron(0x08): B
- TrustZone Enabled BSP
- BL1 version: 20120913
- Checking Boot Mode ... EMMC4.41
- REVISION: 1.1
- NAME: S5P_MSHC4
- MMC Device 0: 15028 MB
- MMC Device 1: 0 MB
- MMC Device 2 not found
- there are pending interrupts 0x00000001
- *** Warning - using default environment
- NAME: S5P_MSHC4
- reading param.. 20490, 1
- MMC read: dev # 0, block # 20490, count 1 ... 1 blocks read: OK
- [10] : A
- completed
- tsp vendor = HS
- MMC read: dev # 0, block # 20480, count 1 ... 1 blocks read: OK
- Net: No ethernet found.
- partion # size(MB) block start # block count partition_Id mmcblk/name
- 1 1 20480 2048 0x83 p1/PARAM
- 2 1 22528 2048 0x83 p2/MISC
- 3 20 24576 40960 0x83 p3/EFS
- 4 14986 65536 30691328 0x05 p4/EXTENDED
- 5 10 65600 20416 0x83 p5/BOOT
- 6 10 86080 20416 0x83 p6/RECOVERY
- 7 5 106560 10176 0x83 p7/LOGO
- 8 445 116800 911296 0x83 p8/CACHE
- 9 700 1028160 1433536 0x83 p9/SYSTEM
- 10 13784 2461760 28229568 0x83 p10/USERDATA
- max17040_get_rcomp : MAX17040 Fuel-Gauge RCOMP 0x8200
- BATTERY(max8903g_charger_enable)
- BATTERY(max17040_get_vcell) : Vcell = 3405000
- BATTERY(max17040_get_soc) : Soc = 0
- CHARGER is Charing!
- -- Mode checking for recovery => [NORMAL BOOT]
- reading logo..device 0 Start 106560, Count 10176
- MMC read: dev # 0, block # 106560, count 10176 ... 10176 blocks read: OK
- completed
- NAME: S5P_MSHC4
- reading param.. 20487, 1
- MMC read: dev # 0, block # 20487, count 1 ... 1 blocks read: OK
- [7] : unlock
- completed
- MMC read: dev # 0, block # 22528, count 1 ... 1 blocks read: OK
- boot mode(misc part) .. misc partitions(miss mode)
- completed
- Hit Enter key to stop autoboot: 1 0
- eMMC OPEN Success.!!
- !!!Notice!!!
- !You must close eMMC boot Partition after all image writing!
- !eMMC boot partition has continuity at image writing time.!
- !So, Do not close boot partition, Before, all images is written.!
- reading FWBL1 ..device 0 Start 0, Count 30
- MMC read: dev # 0, block # 0, count 30 ... 30 blocks read: OK
- completed
- eMMC CLOSE Success.!!
- reading boot..device 0 Start 65600, Count 20416
- MMC read: dev # 0, block # 65600, count 20416 ... 20416 blocks read: OK
- completed
- Boot with zImage
- Wrong Ramdisk Image Format
- [err] boot_get_ramdisk
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- [ 0.000000] c0 0 Initializing cgroup subsys cpu
- [ 0.000000] c0 0 Linux version 3.0.40-mehmet-00001-g2eacfcb (jaekim@jaekim-HP-ProBook-4530s) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Jan 14 15:18:02 CST 2014
- [ 0.000000] c0 0 CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000] c0 0 CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] c0 0 Machine: MEHMET
- [ 0.000000] c0 0 Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] c0 0 CPU EXYNOS4412 (id 0xe4412211)
- [ 0.000000] c0 0 S3C24XX Clocks, Copyright 2004 Simtec Electronics
- [ 0.000000] c0 0 s3c_register_clksrc: clock audiocdclk has no registers set
- [ 0.000000] c0 0 audiocdclk: no parent clock specified
- [ 0.000000] c0 0 s3c_register_clksrc: clock armclk has no registers set
- [ 0.000000] c0 0 EXYNOS4: PLL settings, A=1000000000, M=800000000, E=96000000 V=350000000
- [ 0.000000] c0 0 EXYNOS4: ARMCLK=1000000000, DMC=400000000, ACLK200=24000000
- [ 0.000000] c0 0 ACLK160=160000000, ACLK133=133333333, ACLK100=100000000
- [ 0.000000] c0 0 EXYNOS4: ACLK400=24000000 ACLK266=800000000
- [ 0.000000] c0 0 exynos4_epll_set_rate: Invalid Clock EPLL Frequency
- [ 0.000000] c0 0 uclk1: source is mout_mpll_user (6), rate is 100000000
- [ 0.000000] c0 0 uclk1: source is mout_mpll_user (6), rate is 100000000
- [ 0.000000] c0 0 uclk1: source is mout_mpll_user (6), rate is 100000000
- [ 0.000000] c0 0 uclk1: source is mout_mpll_user (6), rate is 100000000
- [ 0.000000] c0 0 sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_csis: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_cam0: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_cam1: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_fimc: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_fimd: source is mout_mpll_user (6), rate is 400000000
- [ 0.000000] c0 0 sclk_fimd: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 sclk_mfc: source is mout_mfc0 (0), rate is 50000000
- [ 0.000000] c0 0 sclk_g3d: source is mout_g3d0 (0), rate is 50000000
- [ 0.000000] c0 0 sclk_pwi: source is xusbxti (1), rate is 1500000
- [ 0.000000] c0 0 failed to request GYRO_SENSOR_DRDY
- [ 0.000000] c0 0 failed to request GYRO_SENSOR_INT
- [ 0.000000] c0 0 PERCPU: Embedded 7 pages/cpu @c1191000 s6720 r8192 d13760 u32768
- [ 0.000000] c0 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259842
- [ 0.000000] c0 0 Kernel command line: console=ttySAC2,115200n8 androidboot.console=ttySAC2 androidboot.serialno=TXH7ABC00000000A androidboot.bootloader=WILLOWB0313 tsp_vendor=1 console=ttySAC2,115200 root=/dev/mmcblk0p10
- [ 0.000000] c0 0 PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] c0 0 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] c0 0 Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] c0 0 Memory: 1023MB = 1023MB total
- [ 0.000000] c0 0 Memory: 795040k/795040k available, 252512k reserved, 293888K highmem
- [ 0.000000] c0 0 Virtual kernel memory layout:
- [ 0.000000] c0 0 vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] c0 0 fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] c0 0 DMA : 0xfea00000 - 0xffe00000 ( 20 MB)
- [ 0.000000] c0 0 vmalloc : 0xee800000 - 0xf6000000 ( 120 MB)
- [ 0.000000] c0 0 lowmem : 0xc0000000 - 0xee000000 ( 736 MB)
- [ 0.000000] c0 0 pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] c0 0 modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] c0 0 .init : 0xc0008000 - 0xc003b000 ( 204 kB)
- [ 0.000000] c0 0 .text : 0xc003b000 - 0xc0791000 (7512 kB)
- [ 0.000000] c0 0 .data : 0xc0792000 - 0xc0846bc0 ( 723 kB)
- [ 0.000000] c0 0 .bss : 0xc0846be4 - 0xc0987610 (1283 kB)
- [ 0.000000] c0 0 SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] c0 0 Preemptible hierarchical RCU implementation.
- [ 0.000000] c0 0 NR_IRQS:493
- [ 0.000000] c0 0 Console: colour dummy device 80x30
- [ 0.000000] c0 0 Calibrating delay loop... 1992.29 BogoMIPS (lpj=4980736)
- [ 0.045000] c0 0 pid_max: default: 32768 minimum: 301
- [ 0.045000] c0 0 Mount-cache hash table entries: 512
- [ 0.045000] c0 0 Initializing cgroup subsys debug
- [ 0.045000] c0 0 Initializing cgroup subsys cpuacct
- [ 0.045000] c0 0 Initializing cgroup subsys freezer
- [ 0.045000] c0 0 CPU: Testing write buffer coherency: ok
- [ 0.045000] c0 1 L310 cache controller enabled
- [ 0.045000] c0 1 l2x0: 16 ways, CACHE_ID 0x4100c4c8, AUX_CTRL 0x7e470001, Cache size: 1048576 B
- [ 0.085000] c1 0 CPU1: Booted secondary processor
- [ 0.135000] c2 0 CPU2: Booted secondary processor
- [ 0.185000] c3 0 CPU3: Booted secondary processor
- [ 0.215000] c0 1 Brought up 4 CPUs
- [ 0.215000] c0 1 SMP: Total of 4 processors activated (7969.17 BogoMIPS).
- [ 0.220000] c0 1 print_constraints: dummy:
- [ 0.220000] c0 1 NET: Registered protocol family 16
- [ 0.225000] c0 1 ADC0_HW[0x1]
- [ 0.225000] c0 1 ADC1_HW[0x2]
- [ 0.225000] c0 1 ADC2_HW[0x4]
- [ 0.225000] c0 1 ADC3_HW[0x0]
- [ 0.225000] c0 1 g_mehmet_hw_version[0x7]
- [ 0.225000] c0 1 MEHMET HW_VERSION: [MEHMET_HW_VE1]
- [ 0.275000] c0 1 AS0260 CAMERA_RESET START___________
- [ 0.275000] c0 1 AS0260 CAMERA_RESET END ____________
- [ 0.275000] c0 1 brcm_wlan_init: start
- [ 0.275000] c0 1 brcm_init_wlan_mem: WIFI MEM Allocated
- [ 0.280000] c0 1 exynos4_pmu_init: PMU supports 4412(96)
- [ 0.280000] c0 1 S3C Power Management, Copyright 2004 Simtec Electronics
- [ 0.280000] c0 1 EXYNOS4: Initializing architecture
- [ 0.285000] c0 1 s3c-adc samsung-adc-v4: attached adc driver
- [ 0.285000] c0 1 samsung-pd samsung-pd.0: power domain registered
- [ 0.285000] c0 1 samsung-pd samsung-pd.1: power domain registered
- [ 0.285000] c0 1 samsung-pd samsung-pd.2: power domain registered
- [ 0.285000] c0 1 lcd0 disable skip only one time
- [ 0.285000] c0 1 samsung-pd samsung-pd.5: power domain registered
- [ 0.285000] c0 1 samsung-pd samsung-pd.6: power domain registered
- [ 0.285000] c0 1 samsung-pd samsung-pd.7: power domain registered
- [ 0.285000] c0 1 s3c24xx-pwm s3c24xx-pwm.1: tin at 100000000, tdiv at 100000000, tin=divclk, base 8
- [ 0.285000] c0 1 s5p-sysmmu s5p-sysmmu.1: Initialized for s3c-fimc.0.
- [ 0.285000] c0 1 s5p-sysmmu s5p-sysmmu.2: Initialized for s3c-fimc.1.
- [ 0.285000] c0 1 s5p-sysmmu s5p-sysmmu.4: Initialized for s3c-fimc.3.
- [ 0.285000] c0 1 s5p-sysmmu s5p-sysmmu.5: Initialized for s5p-jpeg.
- [ 0.285000] c0 1 s5p-sysmmu s5p-sysmmu.13: Initialized for s3c-mfc.
- [ 0.285000] c0 1 s5p-sysmmu s5p-sysmmu.14: Initialized for s3c-mfc.
- [ 0.305000] c0 1 bio: create slab <bio-0> at 0
- [ 0.305000] c0 1 SCSI subsystem initialized
- [ 0.305000] c0 1 usbcore: registered new interface driver usbfs
- [ 0.305000] c0 1 usbcore: registered new interface driver hub
- [ 0.305000] c0 1 usbcore: registered new device driver usb
- [ 0.310000] c0 1 i2c-gpio i2c-gpio.7: using pins 39 (SDA) and 40 (SCL)
- [ 0.310000] c0 1 i2c-gpio i2c-gpio.9: using pins 282 (SDA) and 281 (SCL)
- [ 0.310000] c0 1 max77686 0-0009: device found
- [ 0.310000] c0 1 max77686_irq_init+
- [ 0.315000] c0 1 max77686_irq_init-
- [ 0.320000] c0 1 print_constraints: vdd_mif range: 850 <--> 1100 mV at 1100 mV
- [ 0.320000] c0 1 print_constraints: vdd_arm range: 850 <--> 1500 mV at 1000 mV
- [ 0.320000] c0 1 print_constraints: vdd_int range: 850 <--> 1150 mV at 1000 mV
- [ 0.320000] c0 1 print_constraints: vdd_g3d range: 850 <--> 1100 mV at 1000 mV
- [ 0.320000] c0 1 print_constraints: vdd buck6: 2000 mV
- [ 0.320000] c0 1 print_constraints: vdd_in235 range: 3300 mV
- [ 0.320000] c0 1 print_constraints: vdd_emmc_2v8 range: 2800 mV
- [ 0.320000] c0 1 print_constraints: vdd_alive range: 1000 mV
- [ 0.320000] c0 1 print_constraints: vdd_m12 range: 1200 mV
- [ 0.325000] c0 1 print_constraints: vdd_io/vdd_bt_wifi_io range: 1800 mV
- [ 0.325000] c0 1 rdev_init_debugfs: vdd_io/vdd_bt_wifi_io range: Failed to create debugfs directory
- [ 0.325000] c0 1 print_constraints: vdd_sd/vdd_mmc012 range: 1200 <--> 2800 mV at 2800 mV
- [ 0.325000] c0 1 rdev_init_debugfs: vdd_sd/vdd_mmc012 range: Failed to create debugfs directory
- [ 0.325000] c0 1 print_constraints: vdd_cam_io range: 1800 <--> 1900 mV at 1800 mV
- [ 0.325000] c0 1 print_constraints: vdd_tsp_1v8 range: 1800 mV
- [ 0.325000] c0 1 print_constraints: vdd_pll range: 1100 mV
- [ 0.325000] c0 1 print_constraints: vdd_mipi_1v0 range: 1000 mV
- [ 0.325000] c0 1 print_constraints: vdd_gps_1v8 range: 1800 mV
- [ 0.325000] c0 1 print_constraints: vdd_mipi_1v8 range: 1800 mV
- [ 0.330000] c0 1 print_constraints: vdd_abb_1v8 range: 1950 mV
- [ 0.330000] c0 1 print_constraints: vdd_uotg_3v3 range: 3300 mV
- [ 0.330000] c0 1 print_constraints: vdd_c2c range: 1800 mV
- [ 0.330000] c0 1 print_constraints: vdd_mmc01_1v8 range: 1800 mV
- [ 0.330000] c0 1 print_constraints: vdd_uotg_1v0 range: 1000 mV
- [ 0.330000] c0 1 print_constraints: vdd_hsic range: 1800 mV
- [ 0.330000] c0 1 print_constraints: vdd_cam range: 2800 <--> 2900 mV at 1200 mV
- [ 0.330000] c0 1 print_constraints: vdd_gps_2v8 range: 2800 mV
- [ 0.335000] c0 1 print_constraints: vdd_cam_core range: 1800 <--> 1900 mV at 1800 mV
- [ 0.335000] c0 1 print_constraints: vdd_bt_wifi range: 3300 mV
- [ 0.335000] c0 1 print_constraints: vdd_lcd range: 3300 mV
- [ 0.335000] c0 1 print_constraints: vdd_sensor range: 3000 mV
- [ 0.335000] c0 1 print_constraints: vdd_audio range: 3300 mV
- [ 0.335000] c0 1 print_constraints: vdd_tsp range: 3000 <--> 3300 mV at 2700 mV
- [ 0.335000] c0 1 print_constraints: 32KHCP_PMIC:
- [ 0.335000] c0 1 s3c-i2c s3c2440-i2c.0: i2c-0: S3C I2C adapter
- [ 0.335000] c0 1 s3c-i2c s3c2440-i2c.1: i2c-1: S3C I2C adapter
- [ 0.335000] c0 1 s3c-i2c s3c2440-i2c.2: i2c-2: S3C I2C adapter
- [ 0.335000] c0 1 s3c-i2c s3c2440-i2c.3: i2c-3: S3C I2C adapter
- [ 0.340000] c0 1 s3c-i2c s3c2440-i2c.4: i2c-4: S3C I2C adapter
- [ 0.340000] c0 1 s3c-i2c s3c2440-i2c.5: i2c-5: S3C I2C adapter
- [ 0.340000] c0 1 Advanced Linux Sound Architecture Driver Version 1.0.24.
- [ 0.340000] c0 1 Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- [ 0.340000] c0 1 Bluetooth: Core ver 2.16
- [ 0.340000] c0 1 NET: Registered protocol family 31
- [ 0.340000] c0 1 Bluetooth: HCI device and connection manager initialized
- [ 0.340000] c0 1 Bluetooth: HCI socket layer initialized
- [ 0.340000] c0 1 Bluetooth: L2CAP socket layer initialized
- [ 0.340000] c0 1 Bluetooth: SCO socket layer initialized
- [ 0.340000] c0 4 cfg80211: Calling CRDA to update world regulatory domain
- [ 0.340000] c0 1 Switching to clocksource mct-frc
- [ 0.341956] c0 1 Switched to NOHz mode on CPU #0
- [ 0.341966] c2 0 Switched to NOHz mode on CPU #2
- [ 0.341974] c3 0 Switched to NOHz mode on CPU #3
- [ 0.341983] c1 5 Switched to NOHz mode on CPU #1
- [ 0.351882] c0 1 NET: Registered protocol family 2
- [ 0.352060] c0 1 IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.352655] c0 1 TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.354150] c0 1 TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.355040] c0 1 TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.355051] c0 1 TCP reno registered
- [ 0.355064] c0 1 UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.355094] c0 1 UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.355438] c0 1 NET: Registered protocol family 1
- [ 0.355642] c0 1 PMU: registered new PMU device of type 0
- [ 0.355793] c0 1 Exynos4 : ARM Clock down on idle mode is enabled
- [ 0.357162] c0 1 [BT] Bluetooth Power On.
- [ 0.410300] c0 1 wake enabled for irq 354
- [ 0.410310] c0 1 [BT] Bluetooth Power Off.
- [ 0.410565] c0 1 Loaded driver for PL330 DMAC-0 s3c-pl330
- [ 0.410577] c0 1 DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
- [ 0.410868] c0 1 Loaded driver for PL330 DMAC-1 s3c-pl330
- [ 0.410879] c0 1 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.410973] c0 1 Loaded driver for PL330 DMAC-2 s3c-pl330
- [ 0.410984] c0 1 DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
- [ 0.411774] c0 1 highmem bounce pool size: 64 pages
- [ 0.411974] c0 1 ashmem: initialized
- [ 0.422365] c0 1 fuse init (API version 7.16)
- [ 0.422708] c0 1 msgmni has been set to 978
- [ 0.425786] c0 1 NET: Registered protocol family 38
- [ 0.425815] c0 1 io scheduler noop registered
- [ 0.425825] c0 1 io scheduler deadline registered (default)
- [ 0.425890] c0 1 io scheduler cfq registered
- [ 0.427006] c0 1 s3cfb s3cfb.0: [fb2] dma: 0x6b8b1000, cpu: 0xee849000, size: 0x00bb8000
- [ 0.435820] c0 1 Bootloader sent 'bootloaderfb' : 5F800000
- [ 0.436596] c0 1 s3cfb s3cfb.0: registered successfully
- [ 0.436956] c0 1 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.640290] c0 1 s5pv210-uart.0: ttySAC0 at MMIO 0x13800000 (irq = 16) is a S3C6400/10
- [ 0.685069] c0 1 s5pv210-uart.1: ttySAC1 at MMIO 0x13810000 (irq = 20) is a S3C6400/10
- [ 0.730063] c0 1 s5pv210-uart.2: ttySAC2 at MMIO 0x13820000 (irq = 24) is a S3C6400/10
- [ 2.018097] c0 1 console [ttySAC2] enabled
- [ 2.075067] c0 1 s5pv210-uart.3: ttySAC3 at MMIO 0x13830000 (irq = 28) is a S3C6400/10
- [ 2.155353] c0 1 Mali: ::Q::exynos_result_of_asv : 0
- [ 2.159264] c0 1 Mali: mali_dvfs[0].vol = 950000
- [ 2.164385] c0 1 Mali: mali_dvfs[1].vol = 975000
- [ 2.169506] c0 1 Mali: mali_runtime_resume.vol = 975000
- [ 2.175245] c0 1 Mali: mali_dvfs[2].vol = 1050000
- [ 2.180453] c0 1 Mali: mali_dvfs[3].vol = 1100000
- [ 2.185661] c0 1 Mali: init_gpu_vol = 1100000
- [ 2.190605] c0 1 Mali: Mali frequency 440
- [ 2.194939] c0 1 Mali: init_mali_clock mali_clock c07ce588
- [ 2.201024] c0 1 Mali: = regulator_set_voltage: 1100000, 1100000
- [ 2.208070] c0 1 Mali: Mali frequency 440
- [ 2.228656] c0 1 Mali: Mali device driver loaded
- [ 2.232530] c0 1 UMP: UMP device driver loaded
- [ 2.244138] c0 1 brd: module loaded
- [ 2.249989] c0 1 loop: module loaded
- [ 2.252539] c0 1 lkdtm: No crash points registered, enable through debugfs
- [ 2.259858] c0 1 pmem: 0 init
- [ 2.263390] c0 1 pmem_gpu1: 0 init
- [ 2.267430] c0 1 [LIGHT] Isl29023 Probe
- [ 2.271571] c0 1 input: light as /devices/virtual/input/input0
- [ 2.280940] c0 1 PPP generic driver version 2.4.2
- [ 2.284859] c0 1 PPP Deflate Compression module registered
- [ 2.290513] c0 1 PPP BSD Compression module registered
- [ 2.296546] c0 1 PPP MPPE Compression module registered
- [ 2.301740] c0 1 NET: Registered protocol family 24
- [ 2.307024] c0 1 tun: Universal TUN/TAP device driver, 1.6
- [ 2.312906] c0 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 2.320231] c0 1 usbcore: registered new interface driver cdc_ether
- [ 2.326632] c0 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.334253] c0 1 s5p-ehci s5p-ehci: S5P EHCI Host Controller
- [ 2.340160] c0 1 s5p-ehci s5p-ehci: new USB bus registered, assigned bus number 1
- [ 2.348061] c0 1 s5p-ehci s5p-ehci: irq 134, io mem 0x12580000
- [ 2.360046] c0 1 s5p-ehci s5p-ehci: USB 0.0 started, EHCI 1.00
- [ 2.365338] c0 1 hub 1-0:1.0: USB hub found
- [ 2.369444] c0 1 hub 1-0:1.0: 3 ports detected
- [ 2.374712] c0 1 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.381418] c0 1 s5p-ohci s5p-ohci: Already power on PHY
- [ 2.387103] c0 1 s5p-ohci s5p-ohci: s5p OHCI
- [ 2.391773] c0 1 s5p-ohci s5p-ohci: new USB bus registered, assigned bus number 2
- [ 2.399670] c0 1 s5p-ohci s5p-ohci: irq 134, io mem 0x12590000
- [ 2.464526] c0 1 hub 2-0:1.0: USB hub found
- [ 2.467688] c0 1 hub 2-0:1.0: 3 ports detected
- [ 2.472976] c0 1 Initializing USB Mass Storage driver...
- [ 2.478428] c0 1 usbcore: registered new interface driver usb-storage
- [ 2.485126] c0 1 USB Mass Storage support registered.
- [ 2.490856] c0 1 usbcore: registered new interface driver usbserial
- [ 2.497277] c0 1 usbserial: USB Serial Driver core
- [ 2.502601] c0 1 USB Serial support registered for FTDI USB Serial Device
- [ 2.509870] c0 1 usbcore: registered new interface driver ftdi_sio
- [ 2.516286] c0 1 ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
- [ 2.523090] c0 1 USB Serial support registered for Moschip 7840/7820 USB Serial Driver
- [ 2.531303] c0 1 mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
- [ 2.538124] c0 1 usbcore: registered new interface driver mos7840
- [ 2.544616] c0 1 USB Serial support registered for pl2303
- [ 2.550448] c0 1 usbcore: registered new interface driver pl2303
- [ 2.556734] c0 1 pl2303: Prolific PL2303 USB to serial adaptor driver
- [ 2.563823] c0 1 s3c-udc : S3C HS USB OTG Device Driver,(c) 2008-2009 Samsung Electronics
- [ 2.563831] c0 1 s3c-udc : version 15 March 2009
- [ 2.579366] c0 1 android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 2.585644] c0 1 android_usb gadget: Number of LUNs=1
- [ 2.591109] c0 1 lun0: LUN: removable file: (no medium)
- [ 2.597245] c0 1 android_usb gadget: android_usb ready
- [ 2.602392] c0 1 Registered gadget driver 'android_usb'
- [ 2.608040] c0 1 s3c-usbgadget s3c-usbgadget: Already power on PHY
- [ 2.615899] c0 1 mousedev: could not register psaux device, error: -16
- [ 2.621574] c0 1 mousedev: PS/2 mouse device common for all mice
- [ 2.628604] c0 1 input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
- [ 2.636188] c0 1 usbcore: registered new interface driver xpad
- [ 2.642092] c0 1 usbcore: registered new interface driver usb_acecad
- [ 2.648743] c0 1 acecad: v3.2:USB Acecad Flair tablet driver
- [ 2.654934] c0 1 usbcore: registered new interface driver aiptek
- [ 2.661243] c0 1 aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
- [ 2.670011] c0 1 aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
- [ 2.678365] c0 1 usbcore: registered new interface driver gtco
- [ 2.684505] c0 1 GTCO usb driver version: 2.00.0006
- [ 2.689739] c0 1 usbcore: registered new interface driver hanwang
- [ 2.696422] c0 1 usbcore: registered new interface driver kbtab
- [ 2.702645] c0 1 kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
- [ 2.709360] c0 1 usbcore: registered new interface driver wacom
- [ 2.715579] c0 1 wacom: v1.52:USB Wacom tablet driver
- [ 2.721045] c0 1 ==ft5x0x_ts_init==
- [ 2.724946] c0 1 regulator_check_voltage: vdd_tsp range: operation not allowed
- [ 2.732591] c0 1 [FocalTech] TS_POWER ON
- [ 3.376414] c0 1 [FocalTech] INIT RESET ON
- [ 3.379594] c0 1 ret=0
- [ 3.885056] c0 1 [mxt_init()] Initializing ...
- [ 3.888477] c0 1 [ATMEL] config data: HS
- [ 3.892812] c0 1 [mxt_probe()] ...
- [ 3.896918] c0 1 input: atmel_1664 as /devices/platform/s3c2440-i2c.5/i2c-5/5-004a/input/input2
- [ 4.010045] c0 1 [ATMEL] TS_POWER ON___________
- [ 4.013533] c0 1 [ATMEL] tsp_vdd1v8 ON___________
- [ 4.019084] c0 1 [ATMEL] tsp_vdd3v3 ON___________
- [ 4.530728] c0 1 [mxt_init_touch_driver()] family=[0xa2] variant=[0x0] version=[0x20] build=[0xab] matrix X,Y size=[32, 52] objects_len=[33]
- [ 4.552507] c0 1 1664s_driver_v13: Finger type = 3
- [ 4.567215] c0 1 [mxt_probe()] power detected(1)
- [ 4.571101] c0 1 [ATMEL] obj_address=[0x01ab(427)] Config Version=[0x8B(139)]
- [ 4.578351] c0 1 [ATMEL] config update starting ...(0x8b->0x88)
- [ 4.584688] c0 1 mxt_defconfig_settings(): object_type = DEBUG_DIAGNOSTICS_T37
- [ 4.599172] c0 1 mxt_defconfig_settings(): object_type = SPT_SERIALDATACOMMAND_T68
- [ 4.609638] c0 1 mxt_defconfig_settings(): object_type = USER_DATA_T38
- [ 4.615429] c0 1 Chip Config Ver (0x8b), New Config Ver (0x88)
- [ 4.624842] c0 1 mxt_defconfig_settings(): object_type = GEN_POWERCONFIG_T7
- [ 4.630772] c0 1 t7_config sizeof (4), [7]
- [ 4.635672] c0 1 mxt_defconfig_settings(): object_type = GEN_ACQUIRECONFIG_T8
- [ 4.643532] c0 1 mxt_defconfig_settings(): object_type = TOUCH_MULTITOUCHSCREEN_T9
- [ 4.656007] c0 1 mxt_defconfig_settings(): object_type = T15
- [ 4.661378] c0 1 mxt_defconfig_settings(): object_type = SPT_COMCONFIG_T18
- [ 4.668207] c0 1 mxt_defconfig_settings(): object_type = T19
- [ 4.674489] c0 1 mxt_defconfig_settings(): object_type = PROCI_ONETOUCHGESTUREPROCESSOR_T24
- [ 4.685081] c0 1 mxt_defconfig_settings(): object_type = SPT_SELFTEST_T25
- [ 4.692096] c0 1 mxt_defconfig_settings(): object_type = PROCI_TWOTOUCHGESTUREPROCESSOR_T27
- [ 4.700689] c0 1 mxt_defconfig_settings(): object_type = PROCI_GRIPSUPPRESSION_T40
- [ 4.708467] c0 1 mxt_defconfig_settings(): object_type = PROCI_TOUCHSUPPRESSION_T42
- [ 4.717360] c0 1 mxt_defconfig_settings(): object_type = SPT_DIGITIZER_T43
- [ 4.724002] c0 1 mxt_defconfig_settings(): object_type = SPT_CTECONFIG_T46
- [ 4.731243] c0 1 mxt_defconfig_settings(): object_type = T47
- [ 4.736571] c0 1 [ATMEL] passive pen disabled
- [ 4.744579] c0 1 mxt_defconfig_settings(): object_type = T55
- [ 4.750288] c0 1 mxt_defconfig_settings(): object_type = PROCI_SHIELDLESS_T56
- [ 4.759549] c0 1 mxt_defconfig_settings(): object_type = SPT_GENERICDATA_T57
- [ 4.766237] c0 1 mxt_defconfig_settings(): object_type = T61
- [ 4.772517] c0 1 mxt_defconfig_settings(): object_type = PROCG_NOISESUPPRESSION_T62
- [ 4.783689] c0 1 mxt_defconfig_settings(): object_type = PROCI_ACTIVESTYLUS_T63
- [ 4.792892] c0 1 mxt_defconfig_settings(): object_type = SPT_GOLDENREFERENCES_T66
- [ 4.800406] c0 1 mxt_defconfig_settings(): object_type = T66
- [ 4.805759] c0 1 mxt_defconfig_settings(): object_type = SPT_DYNAMICCONFIGURATIONCONTROLLER_T70
- [ 4.815234] c0 1 mxt_defconfig_settings(): object_type = SPT_DYNAMICCONFIGURATIONCONTAINER_T71
- [ 4.823563] c0 1 -> mxt_SPT_DYNAMICCONFIGURATIONCONTAINER_T71() obj_size=[168] obj_addr=[491]
- [ 4.841298] c0 1 mxt_defconfig_settings(): object_type = PROCI_ZONEINDICATION_T73
- [ 4.848237] c0 1 mxt_defconfig_settings(): object_type = SPT_CTESCANCONFIG_T77
- [ 4.855773] c0 1 mxt_defconfig_settings(): object_type = SPT_TOUCHEVENTTRIGGER_T79
- [ 4.965040] c0 1 [mxt_probe()] x_dropbits=[0] y_dropbits=[2]
- [ 5.270279] c0 1 calibration success !!!
- [ 5.273999] c1 873 reset is ongoing
- [ 5.274019] c0 1 alps_init: board revision check ok! (upper MVT)
- [ 5.274172] c0 1 alps-init: platform_driver_register
- [ 5.274366] c0 1 alps-init: platform_device_register_simple
- [ 5.274376] c0 1 alps-init: input_allocate_polled_device
- [ 5.274591] c0 1 input: alps_compass as /devices/platform/alps_compass/input/input3
- [ 5.274766] c0 1 alps-init: input_register_polled_device
- [ 5.274911] c0 1 alps-init: misc_register
- [ 5.274919] c0 1 alps-init: early_suspend_register
- [ 5.274948] c0 1 i2c i2c-7: detected HSCDTD007/008 geomagnetic field sensor
- [ 5.286151] c0 1 [HSCD] x:-47 y:-201 z:778
- [ 5.292192] c0 1 i2c i2c-4: detected bam150 accelerometer
- [ 5.301701] c0 1 max77686_rtc_probe
- [ 5.325187] c0 1 max77686-rtc max77686-rtc: max77686_rtc_init_reg: bypass init
- [ 5.354675] c1 873 normal mode
- [ 5.375864] c0 1 using rtc device, max77686-rtc, for alarms
- [ 5.380247] c0 1 max77686-rtc max77686-rtc: rtc core: registered max77686-rtc as rtc0
- [ 5.389180] c0 1 i2c /dev entries driver
- [ 5.394260] c0 1 Linux media interface: v0.10
- [ 5.397873] c0 1 Linux video capture interface: v2.00
- [ 5.403516] c0 1 Samsung MIPI-CSIS0 driver probed successfully
- [ 5.409510] c0 1 Samsung MIPI-CSIS1 driver probed successfully
- [ 5.415843] c0 1 Initialize JPEG driver
- [ 5.420240] c0 1 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video12
- [ 5.427679] c0 1 s5p-jpeg s5p-jpeg: JPEG driver is registered to /dev/video11
- [ 5.435609] c0 1 MFC(Multi Function Codec - FIMV v5.x) registered successfully
- [ 5.445497] c0 1 S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
- [ 5.451171] c0 1 s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
- [ 5.460093] c0 1 device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- [ 5.468807] c0 1 Bluetooth: HCI UART driver ver 2.2
- [ 5.473912] c0 1 Bluetooth: HCI H4 protocol initialized
- [ 5.480102] c0 1 cpuidle: using governor ladder
- [ 5.485461] c0 1 cpuidle: using governor menu
- [ 5.489366] c0 1 mshci: Mobile Storage Host Controller Interface driver
- [ 5.496304] c0 1 mshci: Copyright (c) 2011 Samsung Electronics Co., Ltd
- [ 5.503439] c0 1 dw_mmc dw_mmc: clock source 0: sclk_dwmci (400000000 Hz)
- [ 5.510774] c0 1 mmc0: Version ID 0x5342240a.
- [ 5.515536] c0 1 mmc0: FIFO WMARK FOR RX 0x80 WX 0x40. ###########
- [ 5.522318] c0 1 mmc_detect_change(mmc0): wait for 500ms
- [ 5.527659] c0 1 mmc0: MSHCI controller on samsung-mshci [dw_mmc] using IDMA
- [ 5.535219] c0 1 sdhci: Secure Digital Host Controller Interface driver
- [ 5.542138] c0 1 sdhci: Copyright(c) Pierre Ossman
- [ 5.547418] c0 1 s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (100000000 Hz)
- [ 5.555122] c0 1 mmc1: vmmc regulator found
- [ 5.659871] c0 1 mmc_detect_change(mmc1): wait for 500ms
- [ 5.664154] c0 1 mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
- [ 5.672208] c0 1 mmc1: card removed.
- [ 5.676047] c0 1 mmc_detect_change(mmc1): wait for 500ms
- [ 5.681831] c0 1 s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (100000000 Hz)
- [ 5.689535] c0 1 mmc2: vmmc regulator found
- [ 5.794141] c0 1 mmc_detect_change(mmc2): wait for 500ms
- [ 5.798425] c0 1 mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
- [ 5.812998] c0 1 usbcore: registered new interface driver usbhid
- [ 5.817977] c0 1 usbhid: USB HID core driver
- [ 5.823118] c0 1 logger: created 256K log 'log_main'
- [ 5.828200] c0 1 logger: created 256K log 'log_events'
- [ 5.833770] c0 1 logger: created 256K log 'log_radio'
- [ 5.839222] c0 1 logger: created 256K log 'log_system'
- [ 5.846611] c0 1 Samsung Audio Subsystem Driver, (c) 2011 Samsung Electronics
- [ 5.852766] c0 1 audss_init: RCLK SRC[busclk]
- [ 6.055893] c0 0 mmc0: cmd 52 response timeout error
- [ 6.060677] c0 0 mmc0: cmd 52 response timeout error
- [ 6.069377] c0 0 mmc0: cmd 8 response timeout error
- [ 6.074070] c0 0 mmc0: cmd 5 response timeout error
- [ 6.079301] c0 0 mmc0: cmd 5 response timeout error
- [ 6.084596] c0 0 mmc0: cmd 5 response timeout error
- [ 6.089890] c0 0 mmc0: cmd 5 response timeout error
- [ 6.095251] c0 0 mmc0: cmd 55 response timeout error
- [ 6.100628] c0 0 mmc0: cmd 55 response timeout error
- [ 6.106013] c0 0 mmc0: cmd 55 response timeout error
- [ 6.111394] c0 0 mmc0: cmd 55 response timeout error
- [ 6.149573] c0 5 mmc0: Voltage range not supported for power class.
- [ 6.154807] c0 5 mmc0: power class selection to bus width 8 failed
- [ 6.161604] c0 5 mmc0: Voltage range not supported for power class.
- [ 6.168087] c0 5 mmc0: power class selection to bus width 8 ddr 2 failed
- [ 6.175497] c0 5 mmc0: new high speed DDR MMC card at address 0001
- [ 6.182265] c0 5 mmcblk0: mmc0:0001 016G92 14.6 GiB
- [ 6.187339] c0 5 mmcblk0boot0: mmc0:0001 016G92 partition 1 4.00 MiB
- [ 6.194103] c0 5 mmcblk0boot1: mmc0:0001 016G92 partition 2 4.00 MiB
- [ 6.204276] c0 5 mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 >
- [ 6.212510] c0 5 mmcblk0boot1: unknown partition table
- [ 6.217981] c0 5 mmcblk0boot0: unknown partition table
- [ 6.360370] c0 1 wm8985 1-001a: ASoC: Failed to create Speaker-L/R debugfs file
- [ 6.366653] c0 1 wm8985 1-001a: ASoC: Failed to create HP-L/R debugfs file
- [ 6.375880] c0 1 asoc: wm8985-hifi <-> samsung-i2s.0 mapping ok
- [ 6.382894] c0 1 asoc: bcm4334-pcm <-> samsung-pcm.1 mapping ok
- [ 6.388897] c0 1 jack_mgr_probe : Registering jack driver
- [ 6.394023] c0 1 wake enabled for irq 366
- [ 6.398169] c0 1 ALSA device list:
- [ 6.401845] c0 1 #0: mehmet
- [ 6.405327] c0 1 GACT probability NOT on
- [ 6.409561] c0 1 Mirror/redirect action on
- [ 6.414087] c0 1 u32 classifier
- [ 6.417640] c0 1 Actions configured
- [ 6.421895] c0 1 Netfilter messages via NETLINK v0.30.
- [ 6.427487] c0 1 nf_conntrack version 0.5.0 (12422 buckets, 49688 max)
- [ 6.435312] c0 1 ctnetlink v0.93: registering with nfnetlink.
- [ 6.440583] c0 1 NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 6.448399] c0 1 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 6.455513] c0 1 xt_time: kernel timezone is -0000
- [ 6.461458] c0 1 ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 6.466572] c0 1 arp_tables: (C) 2002 David S. Miller
- [ 6.471943] c0 1 TCP cubic registered
- [ 6.476939] c0 1 NET: Registered protocol family 10
- [ 6.483393] c0 1 Mobile IPv6
- [ 6.485272] c0 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 6.491700] c0 1 IPv6 over IPv4 tunneling driver
- [ 6.500224] c0 1 NET: Registered protocol family 17
- [ 6.504077] c0 1 NET: Registered protocol family 15
- [ 6.509524] c0 1 Bridge firewalling registered
- [ 6.514449] c0 1 NET: Registered protocol family 4
- [ 6.519578] c0 1 Bluetooth: RFCOMM TTY layer initialized
- [ 6.525192] c0 1 Bluetooth: RFCOMM socket layer initialized
- [ 6.531151] c0 1 Bluetooth: RFCOMM ver 1.11
- [ 6.535751] c0 1 Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 6.541912] c0 1 Bluetooth: BNEP filters: protocol multicast
- [ 6.547989] c0 1 Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 6.554953] c0 1 NET: Registered protocol family 35
- [ 6.560152] c0 1 802.1Q VLAN Support v1.8
- [ 6.564484] c0 1 lib80211: common routines for IEEE802.11 drivers
- [ 6.571005] c0 1 Registering the dns_resolver key type
- [ 6.576675] c0 1 batman_adv: B.A.T.M.A.N. advanced next (compatibility version 12) loaded
- [ 6.585147] c0 1 EXYNOS4X12: Adaptive Support Voltage init
- [ 6.591044] c0 1 EXYNOS4X12(SG): ORIG : 2 MOD : 0 RESULT : 2
- [ 6.597204] c0 1 VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- [ 6.605711] c0 1 ThumbEE CPU extension supported.
- [ 6.610842] c0 1 Registering SWP/SWPB emulation handler
- [ 6.616480] c0 1 DVFS : VDD_ARM Voltage table set with 2 Group
- [ 6.622723] c0 1 CPUFREQ L0 : 0 uV
- [ 6.626542] c0 1 CPUFREQ L1 : 0 uV
- [ 6.630362] c0 1 CPUFREQ L2 : 1300000 uV
- [ 6.634691] c0 1 CPUFREQ L3 : 1237500 uV
- [ 6.639041] c0 1 CPUFREQ L4 : 1200000 uV
- [ 6.643381] c0 1 CPUFREQ L5 : 1150000 uV
- [ 6.647721] c0 1 CPUFREQ L6 : 1100000 uV
- [ 6.652061] c0 1 CPUFREQ L7 : 1050000 uV
- [ 6.656401] c0 1 CPUFREQ L8 : 1000000 uV
- [ 6.660741] c0 1 CPUFREQ L9 : 975000 uV
- [ 6.664984] c0 1 CPUFREQ L10 : 962500 uV
- [ 6.669333] c0 1 CPUFREQ L11 : 950000 uV
- [ 6.673674] c0 1 CPUFREQ L12 : 950000 uV
- [ 6.678014] c0 1 CPUFREQ L13 : 925000 uV
- [ 6.682354] c0 1 CPUFREQ L14 : 900000 uV
- [ 6.687314] c0 1 ** temperature set value **
- [ 6.687320] c0 1 Throttling stop_temp = 82 start_temp = 85
- [ 6.687326] c0 1 Waring stop_temp = 102 start_tmep = 105
- [ 6.687332] c0 1 Tripping temp = 110
- [ 6.687337] c0 1 Hw_tripping temp = 113
- [ 6.687342] c0 1 Mem throttle stop_temp= 80, start_temp = 85
- [ 6.687348] c0 1 Trhottling freq = 800000 Warning freq = 200000
- [ 6.726631] c0 1 TC_voltage stop_temp = 13 Start_temp = 10
- [ 6.732615] c0 1 @@@ get_refresh_interval = 0x2e
- [ 6.737646] c0 1 @@@ get_refresh_interval = 0x5d
- [ 6.742682] c0 1 exynos_tmu_init: cpufreq_level[13], busfreq_value[0]
- [ 6.750551] c0 1 Tmu Initialization is sucessful...!
- [ 6.756255] c0 1 regulator_init_complete: vdd_sensor range: incomplete constraints, leaving on
- [ 6.764105] c0 1 regulator_init_complete: vdd_lcd range: incomplete constraints, leaving on
- [ 6.773330] c0 1 regulator_init_complete: vdd_hsic range: incomplete constraints, leaving on
- [ 6.781724] c0 1 regulator_init_complete: vdd_uotg_1v0 range: incomplete constraints, leaving on
- [ 6.790925] c0 1 regulator_init_complete: vdd_mmc01_1v8 range: incomplete constraints, leaving on
- [ 6.800213] c0 1 regulator_init_complete: vdd_c2c range: incomplete constraints, leaving on
- [ 6.808979] c0 1 regulator_init_complete: vdd_uotg_3v3 range: incomplete constraints, leaving on
- [ 6.818180] c0 1 regulator_init_complete: vdd_abb_1v8 range: incomplete constraints, leaving on
- [ 6.827294] c0 1 regulator_init_complete: vdd_mipi_1v8 range: incomplete constraints, leaving on
- [ 6.836648] c0 1 regulator_init_complete: vdd_mipi_1v0 range: incomplete constraints, leaving on
- [ 6.845696] c0 1 regulator_init_complete: vdd_pll range: incomplete constraints, leaving on
- [ 6.854616] c0 1 regulator_init_complete: vdd_sd/vdd_mmc012 range: incomplete constraints, leaving on
- [ 6.864098] c0 1 regulator_init_complete: vdd_m12 range: incomplete constraints, leaving on
- [ 6.872865] c0 1 regulator_init_complete: vdd_in235 range: incomplete constraints, leaving on
- [ 6.881804] c0 1 regulator_init_complete: vdd buck6: incomplete constraints, leaving on
- [ 6.890225] c0 1 regulator_init_complete: vdd_int range: incomplete constraints, leaving on
- [ 6.898990] c0 1 regulator_init_complete: vdd_arm range: incomplete constraints, leaving on
- [ 6.907757] c0 1 regulator_init_complete: vdd_mif range: incomplete constraints, leaving on
- [ 6.916588] c0 1 wifi_set_power = 1
- [ 6.920277] c0 1 brcm_wlan_power Enter: power on
- [ 6.925308] c0 1 gpio_table = [2]
- [ 6.929409] c0 1 WLAN: GPIO_WLAN_EN = 1
- [ 6.933554] c0 1 wifi_set_carddetect = 1
- [ 6.937893] c0 1 gpio_table = [7]
- [ 6.941828] c0 1 mmc_detect_change(mmc2): wait for 500ms
- [ 6.947727] c0 1 mmc2: card inserted.
- [ 6.951614] c0 1 mmc_detect_change(mmc2): wait for 500ms
- [ 7.544241] c0 5 mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 7.555861] c0 5 mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 7.567468] c0 5 mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 7.584448] c0 5 mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 7.610839] c0 5 mmc2: queuing unknown CIS tuple 0x80 (14 bytes)
- [ 7.621194] c0 5 mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 7.885133] c0 5 mmc2: new high speed SDIO card at address 0001
- [ 7.890696] c0 1 alloc static buf at df200000!
- [ 7.895159] c0 1 dhdsdio_probe : no mutex held. set lock
- [ 7.900737] c0 1 F1 signature read @0x18000000=0x16034334
- [ 7.910927] c0 1 DHD: dongle ram size is set to 524288(orig 524288)
- [ 7.917422] c0 1 wl_create_event_handler thr:446 created
- [ 7.917432] c2 1094 CFG80211-ERROR) wl_event_handler : tsk Enter, tsk = 0xdf2b2d88
- [ 7.932044] c0 1 p2p0: P2P Interface Registered
- [ 7.935608] c0 1 dhd_attach thr:44c created
- [ 7.940198] c0 1 dhd_attach thr:44d created
- [ 7.944785] c0 1 dhd_attach thr:44e created
- [ 7.949457] c0 1 wifi_get_mac_addr
- [ 7.955401] c0 1 Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:00:00:00:00:00
- [ 7.963066] c0 1 dhdsdio_probe : the lock is released.
- [ 7.968760] c0 1
- [ 7.968766] c0 1 Dongle Host Driver, version 1.28.19.4 (r)
- [ 7.968771] c0 1 Compiled in drivers/net/wireless/bcmdhd/src on Jan 14 2014 at 15:17:01
- [ 7.985302] c0 1 wifi_set_power = 0
- [ 7.989179] c0 1 brcm_wlan_power Enter: power off
- [ 7.994313] c0 1 gpio_table = [2]
- [ 7.998236] c0 1 WLAN: GPIO_WLAN_EN = 0
- [ 8.002557] c0 1 =========== WLAN placed in RESET ========
- [ 8.009063] c0 1 exynos_usb_switch: Exynos USB Switch Driver
- [ 8.035408] c0 1 max77686-rtc max77686-rtc: setting system clock to 2012-01-01 01:34:30 UTC (1325381670)
- [ 8.044283] c0 1 FIMC0 registered successfully
- [ 8.049071] c0 1 FIMC1 registered successfully
- [ 8.053893] c0 1 FIMC3 registered successfully
- [ 8.060086] c0 1 EXT2-fs (mmcblk0p10): error: couldn't mount because of unsupported optional features (44)
- [ 8.135340] c0 1 EXT4-fs (mmcblk0p10): couldn't mount as ext3 due to feature incompatibilities
- [ 9.276031] c1 1 EXT4-fs (mmcblk0p10): warning: mounting fs with errors, running e2fsck is recommended
- [ 9.285862] c1 1 EXT4-fs (mmcblk0p10): recovery complete
- [ 9.291244] c1 1 EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: (null)
- [ 9.299257] c1 1 VFS: Mounted root (ext4 filesystem) on device 179:10.
- [ 9.306251] c1 1 Freeing init memory: 204K
- [ 9.719116] c0 1 init: plymouth-upstart-bridge main process (1122) terminated with status 1
- [ 9.726863] c0 1 init: plymouth-upstart-bridge main process ended, respawning
- [ 9.811412] c0 1 init: plymouth-upstart-bridge main process (1131) terminated with status 1
- [ 9.818902] c0 1 init: plymouth-upstart-bridge main process ended, respawning
- [ 9.891156] c0 1 init: plymouth-upstart-bridge main process (1135) terminated with status 1
- [ 9.898643] c0 1 init: plymouth-upstart-bridge main process ended, respawning
- [ 10.126585] c2 1 init: mounted-proc main process (1149) terminated with status 1
- [ 10.481618] c3 1195 EXT4-fs error (device mmcblk0p10): ext4_mb_generate_buddy:736: group 6, 1230 blocks in bitmap, 1135 in gd
- [ 10.491728] c3 1195 JBD: Spotted dirty metadata buffer (dev = mmcblk0p10, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
- [ 11.754017] c3 1324 systemd-udevd[1324]: Failed to apply ACL on /dev/video11: Operation not supported
- [ 11.773942] c1 1330 systemd-udevd[1330]: Failed to apply ACL on /dev/video12: Operation not supported
- * Starting Mount filesystems on boot[74G[ OK ]
- * Starting Signal sysvinit that the rootfs is mounted[74G[ OK ]
- * Starting Clean /tmp directory[74G[ OK ]
- * Starting Populate and link to /run filesystem[74G[ OK ]
- * Stopping Populate and link to /run filesystem[74G[ OK ]
- * Stopping Track if upstart is running in a container[74G[ OK ]
- * Stopping Clean /tmp directory[74G[ OK ]
- * Starting Initialize or finalize resolvconf[74G[ OK ]
- * Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]
- * Starting Signal sysvinit that virtual filesystems are mounted[74G[ OK ]
- * Starting Bridge udev events into upstart[74G[ OK ]
- * Starting Signal sysvinit that local filesystems are mounted[74G[ OK ]
- * Starting Signal sysvinit that remote filesystems are mounted[74G[ OK ]
- * Stopping Mount filesystems on boot[74G[ OK ]
- * Starting device node and kernel event manager[74G[ OK ]
- * Starting flush early job output to logs[74G[ OK ]
- * Starting D-Bus system message bus[74G[ OK ]
- * Starting load modules from /etc/modules[74G[ OK ]
- * Starting cold plug devices[74G[ OK ]
- * Starting log initial device creation[74G[ OK ]
- * Stopping flush early job output to logs[74G[ OK ]
- * Stopping load modules from /etc/modules[74G[ OK ]
- * Starting SystemD login management service[74G[ OK ]
- * Starting bluetooth daemon[74G[ OK ]
- * Starting system logging daemon[74G[ OK ]
- * Starting mDNS/DNS-SD daemon[74G[ OK ]
- * Starting unicast DNS configuration daemon[74G[ OK ]
- * Stopping unicast DNS configuration daemon[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting configure network device[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting configure network device[74G[ OK ]
- * Starting mDNS/DNS-SD daemon[74G[ OK ]
- * Starting CUPS printing spooler/server[74G[ OK ]
- * Starting userspace bootsplash[74G[ OK ]
- * Stopping userspace bootsplash[74G[ OK ]
- * Starting Send an event to indicate plymouth is up[74G[ OK ]
- * Stopping Send an event to indicate plymouth is up[74G[ OK ]
- * Starting cups-browsed - Bonjour remote printer browsing daemon[74G[ OK ]
- * Starting mDNS/DNS-SD daemon[74G[ OK ]
- * Starting cups-browsed - Bonjour remote printer browsing daemon[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting configure network device[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting configure network device[74G[ OK ]
- * Starting mDNS/DNS-SD daemon[74G[ OK ]
- * Starting Mount network filesystems[74G[ OK ]
- * Starting Failsafe Boot Delay[74G[ OK ]
- * Stopping Mount network filesystems[74G[ OK ]
- * Starting configure network device[74G[ OK ]
- * Stopping Failsafe Boot Delay[74G[ OK ]
- * Starting cups-browsed - Bonjour remote printer browsing daemon[74G[ OK ]
- No sensors found!
- Make sure you loaded all the kernel drivers you need.
- Try sensors-detect to find out which these are.
- No sensors found!
- Make sure you loaded all the kernel drivers you need.
- Try sensors-detect to find out which these are.
- * Setting sensors limits [80G
- [74G[ OK ]
- * Starting System V initialisation compatibility[74G[ OK ]
- * Starting modem connection manager[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting mDNS/DNS-SD daemon[74G[ OK ]
- * Setting up X socket directories... [80G
- [74G[ OK ]
- * Starting network connection manager[74G[ OK ]
- * Stopping System V initialisation compatibility[74G[ OK ]
- Last login: Sun Jan 1 11:52:45 ACDT 2012 on ttySAC2
- Welcome to Ubuntu 14.04.2 LTS (GNU/Linux 3.0.40-mehmet-00001-g2eacfcb armv7l)
- * Documentation: https://help.ubuntu.com/
- * Starting System V runlevel compatibility[74G[ OK ]
- * Starting save kernel messages[74G[ OK ]
- * Starting configure network device security[74G[ OK ]
- * Starting OpenSSH server[74G[ OK ]
- * Starting anac(h)ronistic cron[74G[ OK ]
- * Starting NTP server ntpd * Starting regular background program processing daemon[74G[ OK ]
- [80G
- [74G[ OK ]
- saned disabled; edit /etc/default/saned
- * Starting crash report submission daemon[74G[ OK ]
- * Stopping save kernel messages[74G[ OK ]
- * Stopping anac(h)ronistic cron[74G[ OK ]
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement