#LEPUS: boot

LEPUS # boot
## Booting image at 80600000 ...
   Image Name:   Linux-2.6.31.3
   Image Type:   MIPS Linux Kernel Image (gzip compressed)
   Data Size:    2075024 Bytes =  2 MB
   Load Address: 80010000
   Entry Point:  80015560
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

Linux version 2.6.31.3 (tablet@tablet) (gcc version 4.3.3 (GCC) ) #90 Thu Nov 16 14:13:43 CST 2017
Jz47XX Floating coprocessor work on 32*32bit mode
console [early0] enabled
CPU revision is: 2ed0024f (Ingenic JZRISC)
FPU revision is: 00770100
CPU clock: 528MHz, System clock: 264MHz, Peripheral clock: 132MHz, Memory clock: 132MHz
JZ4760 Lepus board setup
Power Management for JZ
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
User-defined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping off.  Total pages: 16256
Kernel command line: mem=64M console=ttyS1,57600n8 ip=off rootfstype=ext3 root=/dev/mmcblk0p1 ro g_file_storage.luns=2
PID hash table entries: 256 (order: 8, 1024 bytes)
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
Memory: 60144k/65536k available (2989k kernel code, 5324k reserved, 1438k data, 156k init, 0k highmem)
SLUB: Genslabs=7, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
NR_IRQS:256
Console: colour dummy device 80x25
console handover: boot [early0] -> real [ttyS1]
Calibrating delay loop... 421.06 BogoMIPS (lpj=2105344)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
jz_platform_init
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
jz_i2c0 jz_i2c0.0: JZ4760 i2c bus driver.
jz_i2c1 jz_i2c1.1: JZ4760 i2c bus driver.
mmc0: No card detect facilities available
mmc0: Problem switching card into high-speed mode!
mmc0: new SD card at address 2147
JZ mmc0 driver registered
mmc1: new SDHC card at address 0001
JZ mmc1 driver registered
musb_hdrc: version 6.0, pio, peripheral, debug=0
jz4760: Device only mode.
jz4760: Disable USB PHY.
jz_vbus_hotplug: Registered.
musb_hdrc musb_hdrc.0: USB Peripheral mode controller at b3440000 using PIO, IRQ 21
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
fuse init (API version 7.12)
msgmni has been set to 117
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)

 43CPT80-40 REST ...
LCDC: PixClock:12000000
jz4760fb_map_smem 720 573
jz4760fb_map_smem 720 573
page count is 9
fg1 osd x: 0 y: 0 w: 480 h: 272
var->height 272,var->width 480
LCDC: PixClock:12000000
fb0: jz-lcd frame buffer device, using 2048K of video memory

 43CPT80-40 lcd ...
JZ4760: Char device core registered.
Device 0x15 with i2c speed:10K
JZ4760b SAR-ADC driver registered
JZ4760: Virtual Driver of TCSM registered.
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
first get battery value is 3896
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPPoL2TP kernel driver, V1.0
usbmon: debugfs is not available
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
g_file_storage gadget: File-backed Storage Gadget, version: 20 November 2008
g_file_storage gadget: Number of LUNs=2
jz4760: Disable USB PHY.
jz-gpio-keys: scan interval 20ms
input: JZ GPIO keys as /class/input/input0
drivers/input/keyboard/common_wireless_pad.c 637 elan_pad_init
kernel : keypad register success!
i2c /dev entries driver
mmcblk0: mmc0:2147 APPSD 1.87 GiB
 mmcblk0: p1 p2 p3 p4
mmcblk1: mmc1:0001 00000 3.67 GiB
 mmcblk1: p1
=====>enter init_dlv
register codec 802683dc
===>enter init_jz_i2s
JZ I2S OSS audio driver initialized
TCP cubic registered
NET: Registered protocol family 17
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly on device 179:1.
Freeing unused kernel memory: 156k freed
Warning: unable to open an initial console.
no hp sound/oss/jz4760_dlv.c 1952 hp_ack_timer
kjournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
key_open
jz4760fb_set_par, not implemented



Welcome to dingux
(none) login: JZ DLV: Close REPLAY
--- kernel: volume is 84