Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- #!/bin/bash
- #
- # Copyright (c) Authors: https://www.armbian.com/authors
- #
- # This file is licensed under the terms of the GNU General Public
- # License version 2. This program is licensed "as is" without any
- # warranty of any kind, whether express or implied.
- #
- export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
- THIS_SCRIPT="sysinfo"
- # don't change default values - they are lost on upgrades. Use /etc/default/orangepi-motd for your values
- MOTD_DISABLE=""
- PRIMARY_INTERFACE="eth0"
- PRIMARY_DIRECTION="rx"
- STORAGE=/dev/sda1
- HIDE_IP_PATTERN="^dummy0|^lo"
- CPU_TEMP_LIMIT=60
- # Temperature offset in Celcius degrees
- CPU_TEMP_OFFSET=0
- HDD_TEMP_LIMIT=60
- AMB_TEMP_LIMIT=40
- for f in $MOTD_DISABLE; do
- [[ $f == $THIS_SCRIPT ]] && exit 0
- done
- # don't edit below here
- function display() {
- # $1=name $2=value $3=red_limit $4=minimal_show_limit $5=unit $6=after $7=acs/desc{
- # battery red color is opposite, lower number
- if [[ "$1" == "Battery" ]]; then local great="<"; else local great=">"; fi
- if [[ -n "$2" && "$2" > "0" && (( "${2%.*}" -ge "$4" )) ]]; then
- printf "%-14s" "$1:"
- if awk "BEGIN{exit ! ($2 $great $3)}"; then echo -ne "\e[0;91m $2"; else echo -ne "\e[0;92m $2"; fi
- printf "%-1s\x1B[0m" "$5"
- printf "%-11s\t" "$6"
- return 1
- fi
- } # display
- function getboardtemp() {
- if [ -f /etc/orangepimonitor/datasources/soctemp ]; then
- read raw_temp </etc/orangepimonitor/datasources/soctemp 2>/dev/null
- if [ ! -z $(echo "$raw_temp" | grep -o "^[1-9][0-9]*\.\?[0-9]*$") ] && (( $(echo "${raw_temp} < 200" |bc -l) )); then
- # Allwinner legacy kernels output degree C
- board_temp=${raw_temp}
- else
- board_temp=$(awk '{printf("%d",$1/1000)}' <<<${raw_temp})
- fi
- elif [ -f /etc/orangepimonitor/datasources/pmictemp ]; then
- # fallback to PMIC temperature
- board_temp=$(awk '{printf("%d",$1/1000)}' </etc/orangepimonitor/datasources/pmictemp)
- fi
- # Some boards, such as the Orange Pi Zero LTS, report shifted CPU temperatures
- board_temp=$((board_temp + CPU_TEMP_OFFSET))
- } # getboardtemp
- function batteryinfo() {
- # Battery info for Allwinner
- mainline_dir="/sys/power/axp_pmu"
- legacy_dir="/sys/class/power_supply"
- if [[ -e "$mainline_dir" ]]; then
- read status_battery_connected < $mainline_dir/battery/connected 2>/dev/null
- if [[ "$status_battery_connected" == "1" ]]; then
- read status_battery_charging < $mainline_dir/charger/charging
- read status_ac_connect < $mainline_dir/ac/connected
- read battery_percent< $mainline_dir/battery/capacity
- # dispay charging / percentage
- if [[ "$status_ac_connect" == "1" && "$battery_percent" -lt "100" ]]; then
- status_battery_text=" charging"
- elif [[ "$status_ac_connect" == "1" && "$battery_percent" -eq "100" ]]; then
- status_battery_text=" charged"
- else
- status_battery_text=" discharging"
- fi
- fi
- elif [[ -e "$legacy_dir/axp813-ac" ]]; then
- read status_battery_connected < $legacy_dir/axp20x-battery/present
- if [[ "$status_battery_connected" == "1" ]]; then
- status_battery_text=" "$(awk '{print tolower($0)}' < $legacy_dir/axp20x-battery/status)
- read status_ac_connect < $legacy_dir/axp813-ac/present
- read battery_percent< $legacy_dir/axp20x-battery/capacity
- fi
- elif [[ -e "$legacy_dir/battery" ]]; then
- if [[ (("$(cat $legacy_dir/battery/voltage_now)" -gt "5" )) ]]; then
- status_battery_text=" "$(awk '{print tolower($0)}' < $legacy_dir/battery/status)
- read battery_percent <$legacy_dir/battery/capacity
- fi
- fi
- } # batteryinfo
- function ambienttemp() {
- # define where w1 usually shows up
- W1_DIR="/sys/devices/w1_bus_master1/"
- if [ -f /etc/orangepimonitor/datasources/ambienttemp ]; then
- read raw_temp </etc/orangepimonitor/datasources/ambienttemp 2>/dev/null
- amb_temp=$(awk '{printf("%d",$1/1000)}' <<<${raw_temp})
- echo $amb_temp
- elif [[ -d $W1_DIR && $ONE_WIRE == yes ]]; then
- device=$(ls -1 $W1_DIR | grep -E '^[0-9]{1,4}' | head -1)
- if [[ -n $device ]]; then
- read raw_temp < ${W1_DIR}${device}/hwmon/$(ls -1 ${W1_DIR}${device}/hwmon)/temp1_input 2>/dev/null
- amb_temp=$(awk '{printf("%d",$1/1000)}' <<<${raw_temp})
- echo $amb_temp
- fi
- else
- # read ambient temperature from USB device if available
- if [[ ! -f /usr/bin/temper ]]; then
- echo ""
- return
- fi
- amb_temp=$(temper -c 2>/dev/null)
- case ${amb_temp} in
- *"find the USB device"*)
- echo ""
- ;;
- *)
- amb_temp=$(awk '{print $NF}' <<<$amb_temp | sed 's/C//g')
- echo -n "scale=1;${amb_temp}/1" | grep -oE "\-?[[:digit:]]+\.[[:digit:]]"
- esac
- fi
- } # ambienttemp
- function get_ip_addresses() {
- local ips=()
- for f in /sys/class/net/*; do
- local intf=$(basename $f)
- # match only interface names "dummy0" and "lo"
- if [[ $intf =~ $HIDE_IP_PATTERN ]]; then
- continue
- else
- local tmp=$(ip -4 addr show dev $intf | grep -v "$intf:avahi" | awk '/inet/ {print $2}' | cut -d'/' -f1)
- # add both name and IP - can be informative but becomes ugly with long persistent/predictable device names
- #[[ -n $tmp ]] && ips+=("$intf: $tmp")
- # add IP only
- [[ -n $tmp ]] && ips+=("$tmp")
- fi
- done
- echo "${ips[@]}"
- } # get_ip_addresses
- function storage_info() {
- # storage info
- RootInfo=$(df -h /)
- root_usage=$(awk '/\// {print $(NF-1)}' <<<${RootInfo} | sed 's/%//g')
- root_total=$(awk '/\// {print $(NF-4)}' <<<${RootInfo})
- StorageInfo=$(df -h $STORAGE 2>/dev/null | grep $STORAGE)
- if [[ -n "${StorageInfo}" && ${RootInfo} != *$STORAGE* ]]; then
- storage_usage=$(awk '/\// {print $(NF-1)}' <<<${StorageInfo} | sed 's/%//g')
- storage_total=$(awk '/\// {print $(NF-4)}' <<<${StorageInfo})
- if [[ -n "$(command -v smartctl)" ]]; then
- DISK="${STORAGE::-1}"
- storage_temp+=$(smartctl -l scttempsts $DISK 2> /dev/null | grep -i 'Current Temperature:' | awk '{print $(NF-1)}')
- fi
- fi
- } # storage_info
- # query various systems and send some stuff to the background for overall faster execution.
- # Works only with ambienttemp and batteryinfo since A20 is slow enough :)
- amb_temp=$(ambienttemp &)
- ip_address=$(get_ip_addresses &)
- batteryinfo
- storage_info
- getboardtemp
- critical_load=80
- # get uptime, logged in users and load in one take
- UPTIME=$(LC_ALL=C uptime)
- UPT1=${UPTIME#*'up '}
- UPT2=${UPT1%'user'*}
- users=${UPT2//*','}
- users=${users//' '}
- time=${UPT2%','*}
- time=${time//','}
- time=$(echo $time | xargs)
- load=${UPTIME#*'load average: '}
- load=${load//','}
- load=$(echo $load | cut -d" " -f1)
- [[ $load == 0.0* ]] && load=0.10
- cpucount=$(grep -c processor /proc/cpuinfo)
- load=$(awk '{printf("%.0f",($1/$2) * 100)}' <<< "$load $cpucount")
- # memory and swap
- mem_info=$(LC_ALL=C free -w 2>/dev/null | grep "^Mem" || LC_ALL=C free | grep "^Mem")
- memory_usage=$(awk '{printf("%.0f",(($2-($4+$6+$7))/$2) * 100)}' <<<${mem_info})
- mem_info=$(echo $mem_info | awk '{print $2}')
- memory_total=$(( mem_info / 1024 ))
- swap_info=$(LC_ALL=C free -m | grep "^Swap")
- swap_usage=$( (awk '/Swap/ { printf("%3.0f", $3/$2*100) }' <<<${swap_info} 2>/dev/null || echo 0) | tr -c -d '[:digit:]')
- swap_total=$(awk '{print $(2)}' <<<${swap_info})
- # display info
- display "System load" "${load%% *}" "${critical_load}" "0" "%" ""
- printf "Up time: \x1B[92m%s\x1B[0m\t" "$time"
- display "Local users" "${users##* }" "3" "2" ""
- echo "" # fixed newline
- if [[ ${memory_total} -gt 1000 ]]; then
- memory_total=$(awk '{printf("%.2f",$1/1024)}' <<<${memory_total})"G"
- else
- memory_total+="M"
- fi
- if [[ ${swap_total} -gt 500 ]]; then
- swap_total=$(awk '{printf("%.2f",$1/1024)}' <<<${swap_total})"G"
- else
- swap_total+="M"
- fi
- display "Memory usage" "$memory_usage" "70" "0" "%" " of ${memory_total}"
- display "Zram usage" "$swap_usage" "75" "0" "%" " of ${swap_total}"
- printf "IP: "
- printf "\x1B[92m%s\x1B[0m" "$ip_address"
- echo "" # fixed newline
- display "CPU temp" "$board_temp" $CPU_TEMP_LIMIT "0" "°C" ""
- display "Ambient temp" "$amb_temp" $AMB_TEMP_LIMIT "0" "°C" ""
- display "Usage of /" "$root_usage" "90" "1" "%" " of $root_total"
- echo "" # fixed newline
- a=0
- display "storage/" "$storage_usage" "90" "1" "%" " of $storage_total" ; a=$((a+$?))
- display "storage temp" "$storage_temp" $HDD_TEMP_LIMIT "0" "°C" "" ; a=$((a+$?))
- display "Battery" "$battery_percent" "20" "1" "%" "$status_battery_text" ; a=$((a+$?))
- (( $a > 0 )) && echo "" # new line only if some value is displayed
- # Check whether PRIMARY_INTERFACE exist in /var/lib/vnstat/
- PRIMARY_INTERFACE=$(comm -12 <(ls -1 /var/lib/vnstat/ 2> /dev/null) <(echo "$PRIMARY_INTERFACE" | sed 's/+/\n/g') | sed -n -e 'H;${x;s/\n/+/g;s/^+//;p;}')
- line=0
- if [[ $(command -v vnstat) && -n $PRIMARY_INTERFACE ]]; then
- traffic=$(vnstat -i $PRIMARY_INTERFACE --oneline | cut -d";" -f4,5)
- traffic_rx=$(echo $traffic | cut -d";" -f1,1 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/')
- traffic_tx=$(echo $traffic | cut -d";" -f2,2 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/')
- [[ "$traffic" == *"Not enough"* ]] && { traffic_tx="n/a "; traffic_rx="n/a "; }
- case $PRIMARY_DIRECTION in
- tx)
- printf "TX today: \x1B[92m%s\x1B[0m \t" "$traffic_tx"
- line=$((line+1))
- ;;
- rx)
- printf "RX today: \x1B[92m%s\x1B[0m \t" "$traffic_rx"
- line=$((line+1))
- ;;
- both)
- printf "TX today: \x1B[92m%s\x1B[0m \t" "$traffic_tx"
- printf "RX today: \x1B[92m%s\x1B[0m \t" "$traffic_rx"
- line=$((line+1))
- ;;
- *) #off or whatever
- ;;
- esac
- fi
- if [[ $(command -v zpool) ]]; then
- zpoolstatus="$(zpool status </dev/stdin 2>&1 )"
- if [[ -n $(echo $zpoolstatus | grep 'not loaded') ]]; then
- :
- elif [[ -n $(echo $zpoolstatus | grep 'degraded\|OFFLINE') ]]; then
- printf "ZFS pool: "
- echo -ne "\e[0;91mDegraded\x1B[0m"
- line=$((line+1))
- elif [[ -n $(echo $zpoolstatus | grep 'no pools available') ]]; then
- printf "ZFS pool: "
- echo -ne "n/a"
- line=$((line+1))
- else
- printf "ZFS pool: "
- echo -ne "\e[0;92mOnline\x1B[0m"
- line=$((line+1))
- fi
- fi
- [[ $line -ne 0 ]] && echo ""
- echo ""
Advertisement
Add Comment
Please, Sign In to add comment