SHARE
TWEET

bootlog openwrt arv4518

a guest Apr 3rd, 2013 32 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Linux version 3.8.3 (santi@ubuntu64-virtualbox) (gcc version 4.6.4 20121210 (prerelease) (Linaro GCC 4.6-2012.12) ) #12 Sat Mar 30 18:11:24 CET 2013
  2. [    0.000000] SoC: Danube rev 1.3
  3. [    0.000000] bootconsole [early0] enabled
  4. [    0.000000] CPU revision is: 00019641 (MIPS 24KEc)
  5. [    0.000000] Determined physical RAM map:
  6. [    0.000000]  memory: 04000000 @ 00000000 (usable)
  7. [    0.000000] Initrd not found or empty - disabling initrd
  8. [    0.000000] Zone ranges:
  9. [    0.000000]   Normal   [mem 0x00000000-0x03ffffff]
  10. [    0.000000] Movable zone start for each node
  11. [    0.000000] Early memory node ranges
  12. [    0.000000]   node   0: [mem 0x00000000-0x03ffffff]
  13. [    0.000000] On node 0 totalpages: 16384
  14. [    0.000000] free_area_init_node: node 0, pgdat 802fa4a0, node_mem_map 81002ce0
  15. [    0.000000]   Normal zone: 128 pages used for memmap
  16. [    0.000000]   Normal zone: 0 pages reserved
  17. [    0.000000]   Normal zone: 16256 pages, LIFO batch:3
  18. [    0.000000] Primary instruction cache 16kB, VIPT, 4-way, linesize 32 bytes.
  19. [    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
  20. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  21. [    0.000000] pcpu-alloc: [0] 0
  22. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
  23. [    0.000000] Kernel command line: console=ttyLTQ0,115200 init=/etc/preinit
  24. [    0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  25. [    0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  26. [    0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  27. [    0.000000] __ex_table already sorted, skipping sort
  28. [    0.000000] Writing ErrCtl register=0005ef18
  29. [    0.000000] Readback ErrCtl register=0005ef18
  30. [    0.000000] Memory: 61384k/65536k available (2439k kernel code, 4152k reserved, 705k data, 172k init, 0k highmem)
  31. [    0.000000] NR_IRQS:256
  32. [    0.000000] CPU Clock: 333MHz
  33. [    0.036000] Calibrating delay loop... 221.18 BogoMIPS (lpj=442368)
  34. [    0.036000] pid_max: default: 32768 minimum: 301
  35. [    0.040000] Mount-cache hash table entries: 512
  36. [    0.044000] pinctrl core: initialized pinctrl subsystem
  37. [    0.048000] NET: Registered protocol family 16
  38. [    0.068000] pinctrl-xway 1e100b10.pinmux: Init done
  39. [    0.072000] dma-xway 1e104100.dma: Init done - hw rev: 3, ports: 5, channels: 20
  40. [    0.084000] PCI host bridge /fpi@10000000/pci@E105400 ranges:
  41. [    0.088000]  MEM 0x0000000018000000..0x0000000019ffffff
  42. [    0.092000]   IO 0x000000001ae00000..0x000000001affffff
  43. [    0.116000] bio: create slab <bio-0> at 0
  44. [    0.124000] usbcore: registered new interface driver usbfs
  45. [    0.128000] usbcore: registered new interface driver hub
  46. [    0.132000] usbcore: registered new device driver usb
  47. [    0.136000] PCI host bridge to bus 0000:00
  48. [    0.140000] pci_bus 0000:00: root bus resource [mem 0x18000000-0x19ffffff]
  49. [    0.144000] pci_bus 0000:00: root bus resource [io  0x1ae00000-0x1affffff]
  50. [    0.148000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  51. [    0.152000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  52. [    0.152000] Switching to clocksource MIPS
  53. [    0.160000] NET: Registered protocol family 2
  54. [    0.168000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  55. [    0.172000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  56. [    0.180000] TCP: Hash tables configured (established 512 bind 512)
  57. [    0.188000] TCP: reno registered
  58. [    0.188000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  59. [    0.196000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  60. [    0.204000] NET: Registered protocol family 1
  61. [    0.208000] PCI: CLS 0 bytes, default 32
  62. [    0.208000] gptu: totally 6 16-bit timers/counters
  63. [    0.212000] gptu: misc_register on minor 63
  64. [    0.216000] gptu: succeeded to request irq 126
  65. [    0.220000] gptu: succeeded to request irq 127
  66. [    0.228000] gptu: succeeded to request irq 128
  67. [    0.232000] gptu: succeeded to request irq 129
  68. [    0.236000] gptu: succeeded to request irq 130
  69. [    0.240000] gptu: succeeded to request irq 131
  70. [    0.252000] lantiq,vmmc 1f103000.vmmc: requested GPIO 255
  71. [    0.256000] lantiq,vmmc 1f103000.vmmc: reserved 1MB at 0x03900000
  72. [    0.264000] ath5k,eeprom 103f0400.ath5k_eep: loaded ath5k eeprom
  73. [    0.276000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  74. [    0.284000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  75. [    0.292000] msgmni has been set to 119
  76. [    0.296000] io scheduler noop registered
  77. [    0.300000] io scheduler deadline registered (default)
  78. [    0.308000] 1e100c00.serial: ttyLTQ0 at MMIO 0x1e100c00 (irq = 112) is a lantiq,asc
  79. [    0.316000] console [ttyLTQ0] enabled, bootconsole disabled
  80. [    0.332000] ltq_nor: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x00007f Chip ID 0x0022f9
  81. [    0.340000] ltq_nor: Found an alias at 0x400000 for the chip at 0x0
  82. [    0.340000] ltq_nor: Found an alias at 0x800000 for the chip at 0x0
  83. [    0.340000] ltq_nor: Found an alias at 0xc00000 for the chip at 0x0
  84. [    0.340000] Amd/Fujitsu Extended Query Table at 0x0040
  85. [    0.344000]   Amd/Fujitsu Extended Query version 1.1.
  86. [    0.348000] number of CFI chips: 1
  87. [    0.352000] 4 ofpart partitions found on MTD device ltq_nor
  88. [    0.356000] Creating 4 MTD partitions on "ltq_nor":
  89. [    0.360000] 0x000000000000-0x000000010000 : "uboot"
  90. [    0.368000] 0x000000010000-0x000000020000 : "uboot_env"
  91. [    0.376000] 0x000000020000-0x0000003f0000 : "linux"
  92. [    0.384000] found squashfs behind kernel
  93. [    0.384000] Creating 2 MTD partitions on "ltq_nor":
  94. [    0.388000] 0x000000020000-0x000000135c95 : "kernel"
  95. [    0.396000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  96. [    0.408000] 0x000000135c95-0x0000003f0000 : "rootfs"
  97. [    0.412000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  98. [    0.428000] mtd: partition "rootfs" set to be root filesystem
  99. [    0.432000] mtd: partition "rootfs_data" created automatically, ofs=370000, len=80000
  100. [    0.440000] 0x000000370000-0x0000003f0000 : "rootfs_data"
  101. [    0.448000] 0x0000003f0000-0x000000400000 : "boardconfig"
  102. [    0.480000] libphy: ltq_mii: probed
  103. [    0.512000] Registering RTL8306SD switch with Chip ID: 0x5988, version: 0x0000
  104. [    0.520000] eth0: attached PHY [Realtek RTL8306S] (phy_addr=1e180000.etop-ff:00, irq=-1)
  105. [    0.532000] wdt 1f8803f0.watchdog: Init done
  106. [    0.536000] leds-gpio gpio-leds.5: pins are not configured from the driver
  107. [    0.548000] TCP: cubic registered
  108. [    0.552000] NET: Registered protocol family 17
  109. [    0.556000] 8021q: 802.1Q VLAN Support v1.8
  110. [    0.576000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
  111. [    0.584000] Freeing unused kernel memory: 172k freed
  112. [    7.892000] jffs2: notice: (444) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 12 of xref (0 dead, 4 orphan) found.
  113. [    9.008000] SCSI subsystem initialized
  114. [    9.996000] IFXUSB: ifxusb_hcd: version 3.2 B110801
  115. [   10.504000] IFXUSB: USB core #0 soft-reset
  116. [   10.708000] IFXUSB: USB core #0 soft-reset
  117. [   10.708000] ifxusb_hcd ifxusb_hcd: IFX USB Controller
  118. [   10.716000] ifxusb_hcd ifxusb_hcd: new USB bus registered, assigned bus number 1
  119. [   10.720000] ifxusb_hcd ifxusb_hcd: irq 62, io mem 0xbe101000
  120. [   10.728000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
  121. [   10.732000] IFXUSB: Mode Mismatch Interrupt: currently in Host mode
  122. [   10.740000] IFXUSB: Init: Power Port (0)
  123. [   10.744000] hub 1-0:1.0: USB hub found
  124. [   10.748000] hub 1-0:1.0: 1 port detected
  125. [   10.752000] ifxusb_hcd ifxusb_hcd: requested GPIO 238
  126. [   10.892000] Initializing USB Mass Storage driver...
  127. [   10.896000] usbcore: registered new interface driver usb-storage
  128. [   10.900000] USB Mass Storage support registered.
  129. [   34.588000] Compat-drivers backport release: compat-drivers-2013-01-21-1
  130. [   34.592000] Backport based on wireless-testing.git master-2013-02-22
  131. [   34.600000] compat.git: wireless-testing.git
  132. [   34.644000] cfg80211: Calling CRDA to update world regulatory domain
  133. [   34.648000] cfg80211: World regulatory domain updated:
  134. [   34.652000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  135. [   34.660000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  136. [   34.668000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  137. [   34.676000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  138. [   34.684000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  139. [   34.688000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  140. [   35.776000] NET: Registered protocol family 8
  141. [   35.780000] NET: Registered protocol family 20
  142. [   36.280000] PPP generic driver version 2.4.2
  143. [   36.584000] ip_tables: (C) 2000-2006 Netfilter Core Team
  144. [   36.912000] NET: Registered protocol family 24
  145. [   37.092000] nf_conntrack version 0.5.0 (961 buckets, 3844 max)
  146. [   44.980000] device eth0 entered promiscuous mode
  147. [   44.988000] br-lan: port 1(eth0) entered forwarding state
  148. [   44.992000] br-lan: port 1(eth0) entered forwarding state
  149. [   46.996000] br-lan: port 1(eth0) entered forwarding state
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top