API tools faq
paste
XOIIO

Dell R420 Corrupted IDRAC Log 2

XOIIO
Aug 22nd, 2020
1,894
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.30 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Polling for SD card state change \d state change |
  3. SD card state change, previous=0x7a0 new=0x788
  4.  
  5.  
  6. ######################################################################
  7. ** No bootable iDRAC image is found **
  8. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  9. To Recover iDRAC via an SD card.
  10. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  11. 2) Copy 'firmimg.d7' to root path.
  12. 3) Insert SD card.
  13. 4) System Health & ID button solid amber durning recover.
  14. 5) Both boot paths are flashed.
  15. ######################################################################
  16.  
  17. sh-sdhi: Cmd(d'1) err
  18. sh-sdhi: cmdidx = 1
  19. Card did not respond to voltage select!
  20. Polling for SD card state change /
  21. SD card state change, previous=0x7a0 new=0x708
  22.  
  23.  
  24. ######################################################################
  25. ** No bootable iDRAC image is found **
  26. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  27. To Recover iDRAC via an SD card.
  28. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  29. 2) Copy 'firmimg.d7' to root path.
  30. 3) Insert SD card.
  31. 4) System Health & ID button solid amber durning recover.
  32. 5) Both boot paths are flashed.
  33. ######################################################################
  34.  
  35. Polling for SD card state change /
  36. SD card state change, previous=0x708 new=0x788
  37.  
  38.  
  39. ######################################################################
  40. ** No bootable iDRAC image is found **
  41. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  42. To Recover iDRAC via an SD card.
  43. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  44. 2) Copy 'firmimg.d7' to root path.
  45. 3) Insert SD card.
  46. 4) System Health & ID button solid amber durning recover.
  47. 5) Both boot paths are flashed.
  48. ######################################################################
  49.  
  50. Polling for SD card state change \
  51. SD card state change, previous=0x7a0 new=0x788
  52.  
  53.  
  54. ######################################################################
  55. ** No bootable iDRAC image is found **
  56. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  57. To Recover iDRAC via an SD card.
  58. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  59. 2) Copy 'firmimg.d7' to root path.
  60. 3) Insert SD card.
  61. 4) System Health & ID button solid amber durning recover.
  62. 5) Both boot paths are flashed.
  63. ######################################################################
  64.  
  65. Polling for SD card state change |
  66. SD card state change, previous=0x788 new=0x7b8
  67.  
  68.  
  69. ######################################################################
  70. ** No bootable iDRAC image is found **
  71. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  72. To Recover iDRAC via an SD card.
  73. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  74. 2) Copy 'firmimg.d7' to root path.
  75. 3) Insert SD card.
  76. 4) System Health & ID button solid amber durning recover.
  77. 5) Both boot paths are flashed.
  78. ######################################################################
  79.  
  80.  
  81. Found '/firmimg.d7' in 'FAT' file system
  82.  
  83.  
  84. UTIL RECOVER:Transport:sd TargetMMC:EMMC File:/firmimg.d7
  85. reading /firmimg.d7
  86.  
  87. 112384230 bytes read
  88. UTIL RECOVER:SD load passed from FAT fs.
  89. UTIL RECOVER:Transport time [sec:mil]: 19:348
  90.  
  91. Clear OS images in partition/s.
  92. Clear kernelN, rootfsN, ubootN
  93. 'EMMC' blk size=[0x200][512] Erase to 0xffffffff
  94. Mem buf size=[0x06000000][100663296] Total bytes=[0x08000000][134217728]
  95. blocks[0x1:0x40001][1:262145]
  96. sh_mmcif: Cmd(d'1) erruf[0x88000000]..fill buffer..erase/write
  97. Card did not respond to voltage select!
  98. sh_mmcif: Cmd(d'16) err
  99. set write bl len failed
  100. util flash:
  101. Failure writing blocks [1:196609] RC=0xffffffac
  102. /nRecover returned failure, RC=0xffffffff
  103. Firmimg.d7 might be bad.
  104. Polling for SD card state change \
  105. SD card state change, previous=0x7a0 new=0x788
  106.  
  107.  
  108. ######################################################################
  109. ** No bootable iDRAC image is found **
  110. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  111. To Recover iDRAC via an SD card.
  112. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  113. 2) Copy 'firmimg.d7' to root path.
  114. 3) Insert SD card.
  115. 4) System Health & ID button solid amber durning recover.
  116. 5) Both boot paths are flashed.
  117. ######################################################################
  118.  
  119. Polling for SD card state change -
  120. SD card state change, previous=0x708 new=0x788
  121.  
  122.  
  123. ######################################################################
  124. ** No bootable iDRAC image is found **
  125. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  126. To Recover iDRAC via an SD card.
  127. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  128. 2) Copy 'firmimg.d7' to root path.
  129. 3) Insert SD card.
  130. 4) System Health & ID button solid amber durning recover.
  131. 5) Both boot paths are flashed.
  132. ######################################################################
  133.  
  134. Polling for SD card state change /
  135. SD card state change, previous=0x720 new=0x788
  136.  
  137.  
  138. ######################################################################
  139. ** No bootable iDRAC image is found **
  140. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  141. To Recover iDRAC via an SD card.
  142. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  143. 2) Copy 'firmimg.d7' to root path.
  144. 3) Insert SD card.
  145. 4) System Health & ID button solid amber durning recover.
  146. 5) Both boot paths are flashed.
  147. ######################################################################
  148.  
  149. Polling for SD card state change |
  150. SD card state change, previous=0x788 new=0x738
  151.  
  152.  
  153. ######################################################################
  154. ** No bootable iDRAC image is found **
  155. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  156. To Recover iDRAC via an SD card.
  157. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  158. 2) Copy 'firmimg.d7' to root path.
  159. 3) Insert SD card.
  160. 4) System Health & ID button solid amber durning recover.
  161. 5) Both boot paths are flashed.
  162. ######################################################################
  163.  
  164.  
  165. Found '/firmimg.d7' in 'FAT' file system
  166.  
  167.  
  168. UTIL RECOVER:Transport:sd TargetMMC:EMMC File:/firmimg.d7
  169. reading /firmimg.d7
  170.  
  171. 112384230 bytes read
  172. UTIL RECOVER:SD load passed from FAT fs.
  173. UTIL RECOVER:Transport time [sec:mil]: 19:348
  174.  
  175. Clear OS images in partition/s.
  176. Clear kernelN, rootfsN, ubootN
  177. 'EMMC' blk size=[0x200][512] Erase to 0xffffffff
  178. Mem buf size=[0x06000000][100663296] Total bytes=[0x08000000][134217728]
  179. blocks[0x1:0x40001][1:262145]
  180. sh_mmcif: Cmd(d'1) erruf[0x88000000]..fill buffer..erase/write
  181. Card did not respond to voltage select!
  182. sh_mmcif: Cmd(d'16) err
  183. set write bl len failed
  184. util flash:
  185. Failure writing blocks [1:196609] RC=0xffffffac
  186. /nRecover returned failure, RC=0xffffffff
  187. Firmimg.d7 might be bad.
  188. Polling for SD card state change |
  189.  
  190. U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-467
  191.  
  192. CPU: SH-4A
  193. BOARD: R0P7757LC00xxRL (C0 step) board
  194. BOOT: Secure, HRK generated
  195. DRAM: 240MB
  196. (240MB of 256MB total DRAM is available on U-Boot)
  197. ENV: Using primary env area.
  198. In: serial
  199. Out: serial
  200. Err: serial
  201. PCIe: Bridge loaded with 0x18000 bytes
  202. WDT2: Booted Lower Vector, 'uboot1'
  203. sh_mmcif: 0, sh-sdhi: 1
  204. Net: sh_eth.0, sh_g_eth.0
  205. INFO: 00:002 Start-up -to- util_idrac_main()
  206. INFO: 00:004 U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB
  207. INFO: 00:009 U-Boot checkin date(05-10-2013) Version(1.0.183)
  208. INFO: 00:006 iDRAC PPID <NULL>
  209. INFO: 00:002 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3
  210. INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x14 C4 Little endian
  211. Family=0x10 Major Ver=0x30 Minor Ver=0x0b
  212. PASS: 00:016 Dedicated monolithic mgmt NIC disabled
  213. INFO: 00:129 BCM54610 OUI=0x3fffff Model=0x3f Revision=0x0f PhyAddr=1
  214.  
  215.  
  216. U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-467
  217.  
  218. CPU: SH-4A
  219. BOARD: R0P7757LC00xxRL (C0 step) board
  220. BOOT: Secure, HRK generated
  221. DRAM: 240MB
  222. (240MB of 256MB total DRAM is available on U-Boot)
  223. ENV: Using primary env area.
  224. In: serial
  225. Out: serial
  226. Err: serial
  227. PCIe: Bridge loaded with 0x18000 bytes
  228. WDT2: Booted Lower Vector, 'uboot1'
  229. sh_mmcif: 0, sh-sdhi: 1
  230. Net: sh_eth.0, sh_g_eth.0
  231. INFO: 00:002 Start-up -to- util_idrac_main()
  232. INFO: 00:004 U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB
  233. INFO: 00:009 U-Boot checkin date(05-10-2013) Version(1.0.183)
  234. INFO: 00:005 iDRAC PPID <NULL>
  235. INFO: 00:003 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3
  236. INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x14 C4 Little endian
  237. Family=0x10 Major Ver=0x30 Minor Ver=0x0b
  238. PASS: 00:016 Dedicated monolithic mgmt NIC disabled
  239. INFO: 00:129 BCM54610 OUI=0x3fffff Model=0x3f Revision=0x0f PhyAddr=1
  240. INFO: 00:167 SD CARD: Device: sh-sdhi Manufacturer ID: 28 OEM: 4245
  241. Name: LEXAR Tran Speed: 25000000 Rd Block Len: 512
  242. SD version 2.0 High Capacity: No Capacity: 998768640
  243. sh_mmcif: Cmd(d'1) err
  244. Card did not respond to voltage select!
  245. INFO: 00:033 EMMC: Device: sh_mmcif Manufacturer ID: 0 OEM: 0
  246. Name:
  247. INFO: 00:008 CPLD: Major Ver=0x1 Minor Ver=0x0 Maint Ver=0x4
  248. Planar: Type=0x09 Rev=0x4 Rework=0x0 Scratch/PathRetry=0x00
  249. PASS: 00:014 Coin cell detected good, AD=0x39f low water=0x2c1
  250. PASS: 00:007 PCIe C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbf954 cnt=0x18000
  251. INFO: 00:007 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000)
  252. INFO: 00:006 mode=normal
  253. INFO: 00:003 reset_cause=recover
  254. PASS: 00:004 Booted Lower Vector, 'uboot1' wdt2cnt=1
  255. INFO: 00:005 wdt0cnt=0
  256. PASS: 00:003 SMR0 no sermux env, default 0xd4
  257. INFO: 00:004 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2
  258. MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x7f80feff
  259. BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303
  260. PASS: 00:021 etherc0=C8:1F:66:C1:85:BB
  261. getherc0=C8:1F:66:C1:85:BC
  262. INFO: 00:008 Fan logic is not modified on Non-AC power up
  263. INFO: 00:052 Env and backup CRC'ed ok
  264. sh_mmcif: Cmd(d'1) err
  265. Card did not respond to voltage select!
  266. sh_mmcif: Cmd(d'1) err
  267. Card did not respond to voltage select!
  268. sh_mmcif: Cmd(d'1) err
  269. Card did not respond to voltage select!
  270. sh_mmcif: Cmd(d'16) err
  271. set read bl len failed
  272. *** fail to read block from device ***
  273. *** can't read from device 1 ***
  274. *** create default partitions ***
  275. sh_mmcif: Cmd(d'1) err
  276. Card did not respond to voltage select!
  277. sh_mmcif: Cmd(d'16) err
  278. set write bl len failed
  279. *** fail to write block to device ***
  280. *** can't write to device 1 ***
  281. FAIL: 00:086 fwu_init() failure
  282. INFO: 00:004 Sync eMMC/SPI NOR/Alternate u-boot images
  283. FAIL: 00:005 ...eMMC/MBR does not have a bootable partition
  284. FAIL: 00:006 verify_os_images(): eMMC/MBR does not have a bootable partition
  285. FAIL: 00:007 Boot device=emmc Boot partition-1/No bootable partition
  286. Boot Path Retry:P1/N=0 P5/N-1=0 Invalid boot partition
  287. INFO: 00:015 Sync eMMC/SPI NOR/Alternate u-boot images
  288. FAIL: 00:005 ...eMMC/MBR does not have a bootable partition
  289. FAIL: 00:005 verify_os_images(): eMMC/MBR does not have a bootable partition
  290. FAIL: 00:007 Boot device=emmc Boot partition-1/No bootable partition
  291. Boot Path Retry:P1/N=0 P5/N-1=0 Invalid boot partition
  292. INFO: 00:000 00:670
  293.  
  294.  
  295. WDT2: Disabled
  296.  
  297.  
  298. ######################################################################
  299. ** No bootable iDRAC image is found **
  300. ** (System Health & ID LED is flashing amber at ~1/2 second rate).
  301. To Recover iDRAC via an SD card.
  302. 1) Format SD using FAT on a Windows box or EXT3 using Linux.
  303. 2) Copy 'firmimg.d7' to root path.
  304. 3) Insert SD card.
  305. 4) System Health & ID button solid amber durning recover.
  306. 5) Both boot paths are flashed.
  307. ######################################################################
  308.  
  309.  
  310. Found '/firmimg.d7' in 'FAT' file system
  311.  
  312.  
  313. UTIL RECOVER:Transport:sd TargetMMC:EMMC File:/firmimg.d7
  314. reading /firmimg.d7
  315.  
  316.  
  317. U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-467
  318.  
  319. CPU: SH-4A
  320. BOARD: R0P7757LC00xxRL (C0 step) board
  321. BOOT: Secure, HRK generated
  322. DRAM: 240MB
  323. (240MB of 256MB total DRAM is available on U-Boot)
  324. ENV: Using primary env area.
  325. In: serial
  326. Out: serial
  327. Err: serial
  328. PCIe: Bridge loaded with 0x18000 bytes
  329. WDT2: Booted Lower Vector, 'uboot1'
  330. sh_mmcif: 0, sh-sdhi: 1
  331. Net: sh_eth.0, sh_g_eth.0
  332. INFO: 00:002 Start-up -to- util_idrac_main()
  333. INFO: 00:004 U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB
  334. INFO: 00:009 U-Boot checkin date(05-10-2013) Version(1.0.183)
  335. INFO: 00:005 iDRAC PPID <NULL>
  336. INFO: 00:003 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3
  337. INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x14 C4 Little endian
  338. Family=0x10 Major Ver=0x30 Minor Ver=0x0b
  339. PASS: 00:016 Dedicated monolithic mgmt NIC disabled
  340. INFO: 00:128 BCM54610 OUI=0x3fffff Model=0x3f Revision=0x0f PhyAddr=1
  341. INFO: 00:168 SD CARD: Device: sh-sdhi Manufacturer ID: 28 OEM: 4245
  342. Name: LEXAR Tran Speed: 25000000 Rd Block Len: 512
  343. SD version 2.0 High Capacity: No Capacity: 998768640
  344. sh_mmcif: Cmd(d'1) err
  345. Card did not respond to voltage select!
  346. INFO: 00:033 EMMC: Device: sh_mmcif Manufacturer ID: 0 OEM: 0
  347. Name:
  348. INFO: 00:008 CPLD: Major Ver=0x1 Minor Ver=0x0 Maint Ver=0x4
  349. Planar: Type=0x09 Rev=0x4 Rework=0x0 Scratch/PathRetry=0x00
  350. PASS: 00:014 Coin cell detected good, AD=0x3a1 low water=0x2c1
  351. PASS: 00:007 PCIe C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbf954 cnt=0x18000
  352. INFO: 00:007 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000)
  353. INFO: 00:006 mode=normal
  354. INFO: 00:003 reset_cause=recover
  355. PASS: 00:004 Booted Lower Vector, 'uboot1' wdt2cnt=1
  356. INFO: 00:005 wdt0cnt=0
  357. PASS: 00:003 SMR0 no sermux env, default 0xd4
  358. INFO: 00:004 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2
  359. MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x7f80feff
  360. BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303
  361. PASS: 00:021 etherc0=C8:1F:66:C1:85:BB
  362. getherc0=C8:1F:66:C1:85:BC
  363. INFO: 00:008 Fan logic is not modified on Non-AC power up
  364. INFO: 00:052 Env and backup CRC'ed ok
  365. sh_mmcif: Cmd(d'1) err
  366. Card did not respond to voltage select!
  367. sh_mmcif: Cmd(d'1) err
  368. Card did not respond to voltage select!
  369. sh_mmcif: Cmd(d'1) err
  370. Card did not respond to voltage select!
  371. sh_mmcif: Cmd(d'16) err
  372. set read bl len failed
  373. *** fail to read block from device ***
  374. *** can't read from device 1 ***
  375. *** create default partitions ***
  376. sh_mmcif: Cmd(d'1) err
  377. Card did not respond to voltage select!
  378. sh_mmcif: Cmd(d'16) err
  379. set write bl len failed
  380. *** fail to write block to device ***
  381. *** can't write to device 1 ***
  382. FAIL: 00:086 fwu_init() failure
  383. INFO: 00:004 Sync eMMC/SPI NOR/Alternate u-boot images
  384. FAIL: 00:005 ...eMMC/MBR does not have a bootable partition
  385. FAIL: 00:006 verify_os_images(): eMMC/MBR does not have a bootable partition
  386. FAIL: 00:007 Boot device=emmc Boot partition-1/No bootable partition
  387. Boot Path Retry:P1/N=0 P5/N-1=0 Invalid boot partition
  388. INFO: 00:015 Sync eMMC/SPI NOR/Alternate u-boot images
  389. FAIL: 00:005 ...eMMC/MBR does not have a bootable partition
  390. FAIL: 00:005 verify_os_images(): eMMC/MBR does not have a bootable partition
  391. FAIL: 00:007 Boot device=emmc Boot partition-1/No bootable partition
  392. Boot Path Rý
  393.  
  394. U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB, Build: jenkins-idrac-yocto-release-467
  395.  
  396. CPU: SH-4A
  397. BOARD: R0P7757LC00xxRL (C0 step) board
  398. BOOT: Secure, HRK generated
  399. DRAM: 240MB
  400. (240MB of 256MB total DRAM is available on U-Boot)
  401. ENV: Using primary env area.
  402. In: serial
  403. Out: serial
  404. Err: serial
  405. PCIe: Bridge loaded with 0x18000 bytes
  406. WDT2: Booted Lower Vector, 'uboot1'
  407. sh_mmcif: 0, sh-sdhi: 1
  408. Net: sh_eth.0, sh_g_eth.0
  409. INFO: 00:002 Start-up -to- util_idrac_main()
  410. INFO: 00:004 U-Boot 2009.08-00063-g1de9cb8 (Mar 11 2014 - 04:53:42) Avocent (0.0.3) EVB
  411. INFO: 00:009 U-Boot checkin date(05-10-2013) Version(1.0.183)
  412. INFO: 00:006 iDRAC PPID <NULL>
  413. INFO: 00:002 SPI NOR init 4096 KiB N25Q032 bus=0 cs=0, speed=1000000, mode=3
  414. INFO: 00:007 SH-4A Product: Major Ver=0x31 Minor Ver=0x14 C4 Little endian
  415. Family=0x10 Major Ver=0x30 Minor Ver=0x0b
  416. PASS: 00:016 Dedicated monolithic mgmt NIC enabled (vendor mode override)
  417. INFO: 00:131 BCM54610 OUI=0x00d897 Model=0x26 Revision=0x0a PhyAddr=1
  418. INFO: 00:167 SD CARD: Device: sh-sdhi Manufacturer ID: 28 OEM: 4245
  419. Name: LEXAR Tran Speed: 25000000 Rd Block Len: 512
  420. SD version 2.0 High Capacity: No Capacity: 998768640
  421. sh_mmcif: Cmd(d'1) err
  422. Card did not respond to voltage select!
  423. INFO: 00:033 EMMC: Device: sh_mmcif Manufacturer ID: 0 OEM: 0
  424. Name:
  425. INFO: 00:008 CPLD: Major Ver=0x1 Minor Ver=0x0 Maint Ver=0x4
  426. Planar: Type=0x09 Rev=0x4 Rework=0x0 Scratch/PathRetry=0x00
  427. PASS: 00:014 Coin cell detected good, AD=0x39f low water=0x2c1
  428. PASS: 00:007 PCIe C0 Ver=0.15 MCTP en, CRC=0x8e9b6875 @0x8efbf954 cnt=0x18000
  429. INFO: 00:007 Init PCIe mailbox(PCIe 0xFFEE0150=0x40010000)
  430. INFO: 00:006 mode=vhard
  431. INFO: 00:002 reset_cause=recover
  432. PASS: 00:005 Booted Lower Vector, 'uboot1' wdt2cnt=1
  433. INFO: 00:005 wdt0cnt=0
  434. PASS: 00:003 SMR0 no sermux env, default 0xd4
  435. INFO: 00:004 GRACR=0x3c HISEL=0x00 SIRQCR5_D=0x03 SIRQCR6_D=0x01 LADMSK0=0xff2
  436. MRSTCR0=0xfedffe7f MRSTCR1=0xfff3ff0f MRSTCR2=0x7f80feff
  437. BARMAP=0x1 BCR=0x85000000 NCER=0x01fc NCMCR=0x0006 NCCSR=0x0303
  438. PASS: 00:021 etherc0=C8:1F:66:C1:85:BB
  439. getherc0=C8:1F:66:C1:85:BC
  440. INFO: 00:008 Fan logic is not modified on Non-AC power up
  441. INFO: 00:052 Env and backup CRC'ed ok
  442. sh_mmcif: Cmd(d'1) err
  443. Card did not respond to voltage select!
  444. sh_mmcif: Cmd(d'1) err
  445. Card did not respond to voltage select!
  446. sh_mmcif: Cmd(d'1) err
  447. Card did not respond to voltage select!
  448. sh_mmcif: Cmd(d'16) err
  449. set read bl len failed
  450. *** fail to read block from device ***
  451. *** can't read from device 1 ***
  452. *** create default partitions ***
  453. sh_mmcif: Cmd(d'1) err
  454. Card did not respond to voltage select!
  455. sh_mmcif: Cmd(d'16) err
  456. set write bl len failed
  457. *** fail to write block to device ***
  458. *** can't write to device 1 ***
  459. FAIL: 00:086 fwu_init() failure
  460. INFO: 00:004 Sync eMMC/SPI NOR/Alternate u-boot images
  461. FAIL: 00:005 ...eMMC/MBR does not have a bootable partition
  462. FAIL: 00:006 verify_os_images(): eMMC/MBR does not have a bootable partition
  463. FAIL: 00:007 Boot device=emmc Boot partition-1/No bootable partition
  464. Boot Path Retry:P1/N=0 P5/N-1=0 Invalid boot partition
  465. INFO: 00:014 Sync eMMC/SPI NOR/Alternate u-boot images
  466. FAIL: 00:005 ...eMMC/MBR does not have a bootable partition
  467. FAIL: 00:006 verify_os_images(): eMMC/MBR does not have a bootable partition
  468. FAIL: 00:007 Boot device=emmc Boot partition-1/No bootable partition
  469. Boot Path Retry:P1/N=0 P5/N-1=0 Invalid boot partition
  470. INFO: 03:410 Dedicated NIC has no link, switch to use NCSI
  471. INFO: 00:006 No 'userexe' defined
  472. INFO: 00:000 04:078
  473. Hit any key to stop autoboot: 3
  474. WDT2: Disable in abortboot()
  475. OSWDT: Disable in abortboot()
  476. CPLD_BMCRDY: Enable BMC_MIN_RDY in abortboot(). Prevent BIOS reset.
  477.  
  478. NOTE: After stopping u-boot in this development mode. You may need to
  479. warm/cold reset the server when booting iDRAC manually as BIOS
  480. may have already viewed iDRAC as unresponsive.
  481.  
  482.  
  483.  
  484. RECOVER:Max retries occured for both N/N-1 paths, OR forced recover.
  485.  
  486. iDRAC7=> ?
  487. ? - alias for 'help'
  488. base - print or set address offset
  489. bdinfo - print Board Info structure
  490. boot - boot default, i.e., run 'bootcmd'
  491. bootd - boot default, i.e., run 'bootcmd'
  492. bootm - boot application image from memory
  493. bootp - boot image via network using BOOTP/TFTP protocol
  494. cmp - memory compare
  495. cp - memory copy
  496. crc32 - checksum calculation
  497. dhcp - boot image via network using DHCP/TFTP protocol
  498. echo - echo args to console
  499. erase - erase FLASH memory
  500. ext2load- load binary file from a Ext2 filesystem
  501. ext2ls - list files in a directory (default /)
  502. fatinfo - print information about filesystem
  503. fatload - load binary file from a dos filesystem
  504. fatls - list files in a directory (default /)
  505. flinfo - print FLASH memory information
  506. fwu - fwu - firmware upgrade sub-system, type 'help fwu' for details
  507.  
  508. go - start application at address 'addr'
  509. help - print online help
  510. hrk - Encrypt or decrypt data with AES256-HRK
  511. iminfo - print header information for application image
  512. itest - return true/false on integer compare
  513. loadb - load binary file over serial line (kermit mode)
  514. loads - load S-Record file over serial line
  515. loady - load binary file over serial line (ymodem mode)
  516. loop - infinite loop on address range
  517. loopw - infinite write loop on address range
  518. md - memory display
  519. md5sum - compute MD5 message digest
  520. mm - memory modify (auto-incrementing address)
  521. mmc - MMC sub system
  522. mmcinfo - mmcinfo <dev num>-- display MMC info
  523. mtest - simple RAM read/write test
  524. mw - memory write (fill)
  525. nfs - boot image via network using NFS protocol
  526. nm - memory modify (constant address)
  527. ping - send ICMP ECHO_REQUEST to network host
  528. printenv- print environment variables
  529. protect - enable or disable FLASH write protection
  530. ps - ps - persistent storage, type 'help ps' for details
  531.  
  532. rarpboot- boot image via network using RARP/TFTP protocol
  533. reset - Perform RESET of the CPU
  534. run - run commands in an environment variable
  535. saveenv - save environment variables to persistent storage
  536. setenv - set environment variables
  537. sf - SPI flash sub-system
  538. sh_g200 - enable sh-g200
  539. sh_mdio - MDIO of ETHERC/GETHERC setting
  540. sleep - delay execution for some time
  541. tftpboot- boot image via network using TFTP protocol
  542. util - run a Dell developed utility subcommand.
  543.  
  544. version - print monitor version
  545. write_mac- write MAC address for ETHERC/GETHERC
  546. iDRAC7=> mmcinfo
  547. sh_mmcif: Cmd(d'1) err
  548. Card did not respond to voltage select!
  549. Device: sh_mmcif
  550. Manufacturer ID: 0
  551. OEM: 0
  552. Name: Tran Speed: 0
  553. Rd Block Len: 0
  554. MMC version 0.0
  555. High Capacity: No
  556. Capacity: 0
  557. Bus Width: 1-bit
  558. iDRAC7=> mmcinfo
  559. sh_mmcif: Cmd(d'1) err
  560. Card did not respond to voltage select!
  561. Device: sh_mmcif
  562. Manufacturer ID: 0
  563. OEM: 0
  564. Name: Tran Speed: 0
  565. Rd Block Len: 0
  566. MMC version 0.0
  567. High Capacity: No
  568. Capacity: 0
  569. Bus Width: 1-bit
  570. iDRAC7=> fatinfo
  571. usage: fatinfo <interface> <dev[:part]>
  572. iDRAC7=> mmc
  573. Usage:
  574. MMC sub system
  575. iDRAC7=> ?
  576. ? - alias for 'help'
  577. base - print or set address offset
  578. bdinfo - print Board Info structure
  579. boot - boot default, i.e., run 'bootcmd'
  580. bootd - boot default, i.e., run 'bootcmd'
  581. bootm - boot application image from memory
  582. bootp - boot image via network using BOOTP/TFTP protocol
  583. cmp - memory compare
  584. cp - memory copy
  585. crc32 - checksum calculation
  586. dhcp - boot image via network using DHCP/TFTP protocol
  587. echo - echo args to console
  588. erase - erase FLASH memory
  589. ext2load- load binary file from a Ext2 filesystem
  590. ext2ls - list files in a directory (default /)
  591. fatinfo - print information about filesystem
  592. fatload - load binary file from a dos filesystem
  593. fatls - list files in a directory (default /)
  594. flinfo - print FLASH memory information
  595. fwu - fwu - firmware upgrade sub-system, type 'help fwu' for details
  596.  
  597. go - start application at address 'addr'
  598. help - print online help
  599. hrk - Encrypt or decrypt data with AES256-HRK
  600. iminfo - print header information for application image
  601. itest - return true/false on integer compare
  602. loadb - load binary file over serial line (kermit mode)
  603. loads - load S-Record file over serial line
  604. loady - load binary file over serial line (ymodem mode)
  605. loop - infinite loop on address range
  606. loopw - infinite write loop on address range
  607. md - memory display
  608. md5sum - compute MD5 message digest
  609. mm - memory modify (auto-incrementing address)
  610. mmc - MMC sub system
  611. mmcinfo - mmcinfo <dev num>-- display MMC info
  612. mtest - simple RAM read/write test
  613. mw - memory write (fill)
  614. nfs - boot image via network using NFS protocol
  615. nm - memory modify (constant address)
  616. ping - send ICMP ECHO_REQUEST to network host
  617. printenv- print environment variables
  618. protect - enable or disable FLASH write protection
  619. ps - ps - persistent storage, type 'help ps' for details
  620.  
  621. rarpboot- boot image via network using RARP/TFTP protocol
  622. reset - Perform RESET of the CPU
  623. run - run commands in an environment variable
  624. saveenv - save environment variables to persistent storage
  625. setenv - set environment variables
  626. sf - SPI flash sub-system
  627. sh_g200 - enable sh-g200
  628. sh_mdio - MDIO of ETHERC/GETHERC setting
  629. sleep - delay execution for some time
  630. tftpboot- boot image via network using TFTP protocol
  631. util - run a Dell developed utility subcommand.
  632.  
  633. version - print monitor version
  634. write_mac- write MAC address for ETHERC/GETHERC
  635. iDRAC7=> bdinfo
  636. boot_params = 0x00000000
  637. memstart = 0x80000000
  638. memsize = 0x0F000000
  639. flashstart = 0x00000000
  640. flashsize = 0x00000000
  641. flashoffset = 0x00000000
  642. ethaddr = C8:1F:66:C1:85:BB
  643. ip_addr = 192.168.0.120
  644. baudrate = 115200 bps
  645. iDRAC7=> ú
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!