API tools faq
paste
Advertisement
RobertBerger

phyboard-mira-imx6-3-6 SD card boot log

RobertBerger
Jul 17th, 2022
162
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 25.38 KB | None | 0 0
raw download clone embed print report
  1. barebox 2021.04.0-bsp-yocto-ampliphy-i.mx6-pd21.1.1 #1 Thu Jul 14 09:03:12 UTC 2022
  2.  
  3.  
  4. Board: PHYTEC phyCORE-i.MX6 Quad with NAND
  5. detected i.MX6 Quad revision 1.5
  6. i.MX reset reason WDG (SRSR: 0x00000010)
  7. i.MX6 Quad unique ID: 121821d4ee6ba5b5
  8. mdio_bus: miibus0: probed
  9. eth0: got preset MAC address: 50:2d:f4:16:2d:bd
  10. nand_base: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  11. nand_base: Winbond W29N08GV
  12. nand_base: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  13. Bad block table found at page 524224, version 0x01
  14. Bad block table found at page 524160, version 0x01
  15. m25p80 flash@00: n25q128a13 (16384 Kbytes)
  16. imx-usb 2184200.usb@2184200.of: USB EHCI 1.00
  17. imx-esdhc 2190000.mmc@2190000.of: registered as mmc0
  18. da9063 da90620: da9062 with id 62.12.ff.1a detected
  19. state: New state registered 'state'
  20. state: Using bucket 0@0x00000000
  21. netconsole: registered as netconsole-1
  22. phySOM-i.MX6: Using environment in MMC
  23. malloc space: 0x2fe7a760 -> 0x4fcf4ebf (size 510.5 MiB)
  24. mmc0: detected SD card version 2.0
  25. mmc0: registered mmc0
  26.  
  27. Hit m for menu or any to stop autoboot: 1
  28. Booting entry 'mmc'
  29. Found node /soc/bus@2000000
  30. mounted /dev/mmc0.0 on /mnt/mmc0.0
  31. ext4 ext40: EXT2 rev 1, inode_size 256, descriptor size 64
  32. mounted /dev/mmc0.1 on /mnt/mmc0.1
  33.  
  34. Loading ARM Linux zImage '/mnt/mmc0.0/zImage'
  35. Loading devicetree from '/mnt/mmc0.0/oftree'
  36. commandline: consoleblank=0 console=ttymxc1,115200n8 root=/dev/mmcblk0p2 rootflags=data=journal imxdrm.legacyfb_depth=32 rootwait ro fsck.repair=yes
  37. Starting kernel in secure mode
  38. [ 0.000000] Booting Linux on physical CPU 0x0
  39. [ 0.000000] Linux version 5.19.0-rc6 (oe-user@oe-host) (arm-phytec-linux-gnueabi-gcc (GCC) 10.3.0, GNU ld (GNU Binutils) 2.36.1.20210703) #1 SMP Wed Jul 13 19:08:14 UTC 2022
  40. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  41. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  42. [ 0.000000] OF: fdt: Machine model: PHYTEC phyBOARD-Mira Quad Carrier-Board with NAND
  43. [ 0.000000] Memory policy: Data cache writealloc
  44. [ 0.000000] efi: UEFI not found.
  45. [ 0.000000] cma: Reserved 64 MiB at 0x4b800000
  46. [ 0.000000] Zone ranges:
  47. [ 0.000000] DMA [mem 0x0000000010000000-0x000000003fffffff]
  48. [ 0.000000] Normal empty
  49. [ 0.000000] HighMem [mem 0x0000000040000000-0x000000004fffffff]
  50. [ 0.000000] Movable zone start for each node
  51. [ 0.000000] Early memory node ranges
  52. [ 0.000000] node 0: [mem 0x0000000010000000-0x000000004fffffff]
  53. [ 0.000000] Initmem setup node 0 [mem 0x0000000010000000-0x000000004fffffff]
  54. [ 0.000000] percpu: Embedded 17 pages/cpu s37652 r8192 d23788 u69632
  55. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
  56. [ 0.000000] Kernel command line: consoleblank=0 console=ttymxc1,115200n8 root=/dev/mmcblk0p2 rootflags=data=journal imxdrm.legacyfb_depth=32 rootwait ro fsck.repair=yes
  57. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  58. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  59. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  60. [ 0.000000] Memory: 944972K/1048576K available (15360K kernel code, 2490K rwdata, 6008K rodata, 2048K init, 431K bss, 38068K reserved, 65536K cma-reserved, 195592K highmem)
  61. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  62. [ 0.000000] trace event string verifier disabled
  63. [ 0.000000] rcu: Hierarchical RCU implementation.
  64. [ 0.000000] rcu: RCU event tracing is enabled.
  65. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=16 to nr_cpu_ids=4.
  66. [ 0.000000] Tracing variant of Tasks RCU enabled.
  67. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  68. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  69. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  70. [ 0.000000] L2C-310 errata 752271 769419 enabled
  71. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  72. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  73. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  74. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  75. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  76. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  77. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  78. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  79. [ 0.000001] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  80. [ 0.000034] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  81. [ 0.009355] Console: colour dummy device 80x30
  82. [ 0.009480] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  83. [ 0.009507] pid_max: default: 32768 minimum: 301
  84. [ 0.009918] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  85. [ 0.009965] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  86. [ 0.011134] CPU: Testing write buffer coherency: ok
  87. [ 0.011239] CPU0: Spectre v2: using BPIALL workaround
  88. [ 0.011779] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  89. [ 0.013321] cblist_init_generic: Setting adjustable number of callback queues.
  90. [ 0.013341] cblist_init_generic: Setting shift to 2 and lim to 1.
  91. [ 0.013626] Setting up static identity map for 0x10300000 - 0x103000ac
  92. [ 0.017428] rcu: Hierarchical SRCU implementation.
  93. [ 0.025741] EFI services will not be available.
  94. [ 0.026424] smp: Bringing up secondary CPUs ...
  95. [ 0.027813] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  96. [ 0.027843] CPU1: Spectre v2: using BPIALL workaround
  97. [ 0.029428] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  98. [ 0.029454] CPU2: Spectre v2: using BPIALL workaround
  99. [ 0.031037] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  100. [ 0.031067] CPU3: Spectre v2: using BPIALL workaround
  101. [ 0.031247] smp: Brought up 1 node, 4 CPUs
  102. [ 0.031272] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  103. [ 0.031292] CPU: All CPU(s) started in SVC mode.
  104. [ 0.032248] devtmpfs: initialized
  105. [ 0.048586] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  106. [ 0.048979] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  107. [ 0.049022] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  108. [ 0.055263] pinctrl core: initialized pinctrl subsystem
  109. [ 0.058413] DMI not present or invalid.
  110. [ 0.059814] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  111. [ 0.065824] DMA: preallocated 256 KiB pool for atomic coherent allocations
  112. [ 0.071342] thermal_sys: Registered thermal governor 'step_wise'
  113. [ 0.071755] cpuidle: using governor menu
  114. [ 0.072240] CPU identified as i.MX6Q, silicon rev 1.5
  115. [ 0.131265] platform 2400000.ipu: Fixing up cyclic dependency with 120000.hdmi
  116. [ 0.131419] platform 2400000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu1_csi0_mux
  117. [ 0.133732] platform 2800000.ipu: Fixing up cyclic dependency with 120000.hdmi
  118. [ 0.133876] platform 2800000.ipu: Fixing up cyclic dependency with 20e0000.iomuxc-gpr:ipu2_csi1_mux
  119. [ 0.149665] No ATAGs?
  120. [ 0.149925] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  121. [ 0.149947] hw-breakpoint: maximum watchpoint size is 4 bytes.
  122. [ 0.156681] imx6q-pinctrl 20e0000.pinctrl: initialized IMX pinctrl driver
  123. [ 0.170694] Serial: AMBA PL011 UART driver
  124. [ 0.229591] mxs-dma 110000.dma-apbh: initialized
  125. [ 0.245038] iommu: Default domain type: Translated
  126. [ 0.245055] iommu: DMA domain TLB invalidation policy: strict mode
  127. [ 0.246529] SCSI subsystem initialized
  128. [ 0.247406] usbcore: registered new interface driver usbfs
  129. [ 0.247496] usbcore: registered new interface driver hub
  130. [ 0.247575] usbcore: registered new device driver usb
  131. [ 0.247984] usb_phy_generic usbphynop1: supply vcc not found, using dummy regulator
  132. [ 0.248241] usb_phy_generic usbphynop1: dummy supplies not allowed for exclusive requests
  133. [ 0.248522] usb_phy_generic usbphynop2: supply vcc not found, using dummy regulator
  134. [ 0.248775] usb_phy_generic usbphynop2: dummy supplies not allowed for exclusive requests
  135. [ 0.252681] i2c i2c-0: IMX I2C adapter registered
  136. [ 0.254017] i2c i2c-1: IMX I2C adapter registered
  137. [ 0.256678] i2c i2c-2: IMX I2C adapter registered
  138. [ 0.259246] pps_core: LinuxPPS API ver. 1 registered
  139. [ 0.259259] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  140. [ 0.259296] PTP clock support registered
  141. [ 0.259757] EDAC MC: Ver: 3.0.0
  142. [ 0.265962] vgaarb: loaded
  143. [ 2.545029] clocksource: Switched to clocksource mxc_timer1
  144. [ 2.564443] NET: Registered PF_INET protocol family
  145. [ 2.565343] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  146. [ 2.568981] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  147. [ 2.569043] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  148. [ 2.569085] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  149. [ 2.569244] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
  150. [ 2.569522] TCP: Hash tables configured (established 8192 bind 8192)
  151. [ 2.569888] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  152. [ 2.569970] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  153. [ 2.570328] NET: Registered PF_UNIX/PF_LOCAL protocol family
  154. [ 2.571429] RPC: Registered named UNIX socket transport module.
  155. [ 2.571448] RPC: Registered udp transport module.
  156. [ 2.571458] RPC: Registered tcp transport module.
  157. [ 2.571466] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [ 2.571482] PCI: CLS 0 bytes, default 64
  159. [ 2.572623] armv7-pmu pmu: hw perfevents: no interrupt-affinity property, guessing.
  160. [ 2.624696] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  161. [ 2.628475] Initialise system trusted keyrings
  162. [ 2.628973] workingset: timestamp_bits=30 max_order=18 bucket_order=0
  163. [ 2.640578] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  164. [ 2.641914] NFS: Registering the id_resolver key type
  165. [ 2.641988] Key type id_resolver registered
  166. [ 2.642002] Key type id_legacy registered
  167. [ 2.642185] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  168. [ 2.642199] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
  169. [ 2.642258] ntfs: driver 2.1.32 [Flags: R/O].
  170. [ 2.643109] Key type asymmetric registered
  171. [ 2.643125] Asymmetric key parser 'x509' registered
  172. [ 2.643410] bounce: pool size: 64 pages
  173. [ 2.643618] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  174. [ 2.643635] io scheduler mq-deadline registered
  175. [ 2.643647] io scheduler kyber registered
  176. [ 2.760113] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
  177. [ 2.760149] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
  178. [ 2.870627] Serial: 8250/16550 driver, 5 ports, IRQ sharing enabled
  179. [ 2.880110] SuperH (H)SCI(F) driver initialized
  180. [ 2.882256] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 269, base_baud = 5000000) is a IMX
  181. [ 3.753760] printk: console [ttymxc1] enabled
  182. [ 3.760682] msm_serial: driver initialized
  183. [ 3.764800] STMicroelectronics ASC driver initialized
  184. [ 3.773339] STM32 USART driver initialized
  185. [ 3.817265] brd: module loaded
  186. [ 3.833625] loop: module loaded
  187. [ 3.837506] at24 2-0050: supply vcc not found, using dummy regulator
  188. [ 3.845024] at24 2-0050: 4096 byte 24c32 EEPROM, writable, 32 bytes/write
  189. [ 3.870159] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xd3
  190. [ 3.876586] nand: Winbond W29N08GV
  191. [ 3.880005] nand: 1024 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
  192. [ 3.888703] Bad block table found at page 524224, version 0x01
  193. [ 3.894912] Bad block table found at page 524160, version 0x01
  194. [ 3.901289] 3 fixed-partitions partitions found on MTD device gpmi-nand
  195. [ 3.907985] Creating 3 MTD partitions on "gpmi-nand":
  196. [ 3.913061] 0x000000000000-0x000001000000 : "barebox"
  197. [ 3.920997] 0x000001000000-0x000001100000 : "barebox-environment"
  198. [ 3.929759] 0x000001100000-0x000040000000 : "root"
  199. [ 3.943912] gpmi-nand 112000.nand-controller: driver registered.
  200. [ 3.967165] CAN device driver interface
  201. [ 3.973761] bgmac_bcma: Broadcom 47xx GBit MAC driver loaded
  202. [ 3.983020] e1000e: Intel(R) PRO/1000 Network Driver
  203. [ 3.988042] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  204. [ 3.994086] igb: Intel(R) Gigabit Ethernet Network Driver
  205. [ 3.999559] igb: Copyright (c) 2007-2014 Intel Corporation.
  206. [ 4.017419] pegasus: Pegasus/Pegasus II USB Ethernet driver
  207. [ 4.023089] usbcore: registered new interface driver pegasus
  208. [ 4.028891] usbcore: registered new interface driver asix
  209. [ 4.034368] usbcore: registered new interface driver ax88179_178a
  210. [ 4.040580] usbcore: registered new interface driver cdc_ether
  211. [ 4.046567] usbcore: registered new interface driver smsc75xx
  212. [ 4.052427] usbcore: registered new interface driver smsc95xx
  213. [ 4.058297] usbcore: registered new interface driver net1080
  214. [ 4.064033] usbcore: registered new interface driver cdc_subset
  215. [ 4.070061] usbcore: registered new interface driver zaurus
  216. [ 4.075817] usbcore: registered new interface driver cdc_ncm
  217. [ 4.088717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  218. [ 4.095329] ehci-pci: EHCI PCI platform driver
  219. [ 4.099869] ehci-platform: EHCI generic platform driver
  220. [ 4.105705] ehci-omap: OMAP-EHCI Host Controller driver
  221. [ 4.111295] ehci-orion: EHCI orion driver
  222. [ 4.115781] SPEAr-ehci: EHCI SPEAr driver
  223. [ 4.120161] ehci-st: EHCI STMicroelectronics driver
  224. [ 4.125460] ehci-atmel: EHCI Atmel driver
  225. [ 4.129822] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  226. [ 4.136093] ohci-pci: OHCI PCI platform driver
  227. [ 4.140650] ohci-platform: OHCI generic platform driver
  228. [ 4.146442] SPEAr-ohci: OHCI SPEAr driver
  229. [ 4.150840] ohci-st: OHCI STMicroelectronics driver
  230. [ 4.156150] ohci-atmel: OHCI Atmel driver
  231. [ 4.161738] usbcore: registered new interface driver usb-storage
  232. [ 4.183457] i2c_dev: i2c /dev entries driver
  233. [ 4.232035] sdhci: Secure Digital Host Controller Interface driver
  234. [ 4.238285] sdhci: Copyright(c) Pierre Ossman
  235. [ 4.248097] Synopsys Designware Multimedia Card Interface Driver
  236. [ 4.258969] sdhci-pltfm: SDHCI platform and OF driver helper
  237. [ 4.267277] sdhci-esdhc-imx 2190000.mmc: Got CD GPIO
  238. [ 4.278505] ledtrig-cpu: registered to indicate activity on CPUs
  239. [ 4.287649] caam 2100000.crypto: Entropy delay = 3200
  240. [ 4.310424] mmc0: SDHCI controller on 2190000.mmc [2190000.mmc] using ADMA
  241. [ 4.353517] caam 2100000.crypto: Instantiated RNG4 SH0
  242. [ 4.354605] mmc0: new high speed SDHC card at address 59b4
  243. [ 4.365809] mmcblk0: mmc0:59b4 USDU1 29.4 GiB
  244. [ 4.375303] mmcblk0: p1 p2
  245. [ 4.414283] caam 2100000.crypto: Instantiated RNG4 SH1
  246. [ 4.419489] caam 2100000.crypto: device ID = 0x0a16010000000000 (Era 4)
  247. [ 4.426162] caam 2100000.crypto: job rings = 2, qi = 0
  248. [ 4.442270] caam algorithms registered in /proc/crypto
  249. [ 4.447781] caam 2100000.crypto: registering rng-caam
  250. [ 4.475453] caam 2100000.crypto: rng crypto API alg registered prng-caam
  251. [ 4.485601] usbcore: registered new interface driver usbhid
  252. [ 4.491201] usbhid: USB HID core driver
  253. [ 4.512573] NET: Registered PF_INET6 protocol family
  254. [ 4.519753] Segment Routing with IPv6
  255. [ 4.523538] In-situ OAM (IOAM) with IPv6
  256. [ 4.527735] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  257. [ 4.534857] NET: Registered PF_PACKET protocol family
  258. [ 4.539990] can: controller area network core
  259. [ 4.544486] NET: Registered PF_CAN protocol family
  260. [ 4.549352] can: raw protocol
  261. [ 4.552342] can: broadcast manager protocol
  262. [ 4.556586] can: netlink gateway - max_hops=1
  263. [ 4.561439] Key type dns_resolver registered
  264. [ 4.567923] ThumbEE CPU extension supported.
  265. [ 4.572228] Registering SWP/SWPB emulation handler
  266. [ 4.578311] Loading compiled-in X.509 certificates
  267. [ 4.657458] random: crng init done
  268. [ 4.675969] ci_hdrc ci_hdrc.1: EHCI Host Controller
  269. [ 4.680911] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  270. [ 4.715079] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  271. [ 4.721830] hub 1-0:1.0: USB hub found
  272. [ 4.725725] hub 1-0:1.0: 1 port detected
  273. [ 4.758186] imx-uart 21ec000.serial: deferred probe timeout, ignoring dependency
  274. [ 4.772529] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  275. [ 4.791980] imx-uart 21ec000.serial: deferred probe timeout, ignoring dependency
  276. [ 4.810416] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support!
  277. [ 4.823409] EXT4-fs: Mount option(s) incompatible with ext2
  278. [ 4.835284] EXT4-fs (mmcblk0p2): mounted filesystem with journalled data mode. Quota mode: disabled.
  279. [ 4.844519] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  280. [ 4.852185] devtmpfs: mounted
  281. [ 4.862590] Freeing unused kernel image (initmem) memory: 2048K
  282. [ 4.896165] Run /sbin/init as init process
  283. [ 5.236466] systemd[1]: systemd 247.6+ running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ +LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD -IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  284. [ 5.259988] systemd[1]: Detected architecture arm.
  285.  
  286. Welcome to The ampliPHY Distribution BSP-Yocto-Ampliphy-i.MX6-PD21.1.1!
  287.  
  288. [ 5.306204] systemd[1]: Set hostname to <phyboard-mira-imx6-3>.
  289. [ 5.350496] systemd[1]: Using hardware watchdog 'imx2+ watchdog', version 0, device /dev/watchdog
  290. [ 5.359622] systemd[1]: Set hardware watchdog to 1min.
  291. [ 6.109826] systemd[1]: Queued start job for default target Multi-User System.
  292. [ 6.121908] systemd[1]: Created slice system-getty.slice.
  293. [ OK ] Created slice system-getty.slice.
  294. [ 6.156612] systemd[1]: Created slice system-modprobe.slice.
  295. [ OK ] Created slice system-modprobe.slice.
  296. [ 6.196629] systemd[1]: Created slice system-serial\x2dgetty.slice.
  297. [ OK ] Created slice system-serial\x2dgetty.slice.
  298. [ 6.236283] systemd[1]: Created slice User and Session Slice.
  299. [ OK ] Created slice User and Session Slice.
  300. [ 6.275899] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  301. [ OK ] Started Dispatch Password …ts to Console Directory Watch.
  302. [ 6.315769] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  303. [ OK ] Started Forward Password R…uests to Wall Directory Watch.
  304. [ 6.355943] systemd[1]: Reached target Paths.
  305. [ OK ] Reached target Paths.
  306. [ 6.385564] systemd[1]: Reached target Remote File Systems.
  307. [ OK ] Reached target Remote File Systems.
  308. [ 6.425395] systemd[1]: Reached target Slices.
  309. [ OK ] Reached target Slices.
  310. [ 6.455667] systemd[1]: Reached target Swap.
  311. [ OK ] Reached target Swap.
  312. [ 6.492802] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  313. [ 6.502227] systemd[1]: Listening on Journal Socket (/dev/log).
  314. [ OK ] Listening on Journal Socket (/dev/log).
  315. [ 6.536574] systemd[1]: Listening on Journal Socket.
  316. [ OK ] Listening on Journal Socket.
  317. [ 6.576725] systemd[1]: Listening on Network Service Netlink Socket.
  318. [ OK ] Listening on Network Service Netlink Socket.
  319. [ 6.616651] systemd[1]: Listening on udev Control Socket.
  320. [ OK ] Listening on udev Control Socket.
  321. [ 6.656224] systemd[1]: Listening on udev Kernel Socket.
  322. [ OK ] Listening on udev Kernel Socket.
  323. [ 6.696236] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  324. [ 6.705433] systemd[1]: Condition check resulted in POSIX Message Queue File System being skipped.
  325. [ 6.720648] systemd[1]: Mounting Kernel Debug File System...
  326. Mounting Kernel Debug File System...
  327. [ 6.761227] systemd[1]: Mounting Kernel Trace File System...
  328. Mounting Kernel Trace File System...
  329. [ 6.807524] systemd[1]: Mounting Temporary Directory (/tmp)...
  330. Mounting Temporary Directory (/tmp)...
  331. [ 6.845981] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  332. [ 6.864312] systemd[1]: Starting Load Kernel Module configfs...
  333. Starting Load Kernel Module configfs...
  334. [ 6.901690] systemd[1]: Starting Load Kernel Module drm...
  335. Starting Load Kernel Module drm...
  336. [ 6.941766] systemd[1]: Starting Load Kernel Module fuse...
  337. Starting Load Kernel Module fuse...
  338. [ 6.981517] systemd[1]: Starting File System Check on Root Device...
  339. Starting File System Check on Root Device...
  340. [ 7.028440] systemd[1]: Starting Journal Service...
  341. Starting Journal Service...
  342. [ 7.040140] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  343. [ 7.056117] systemd[1]: Starting Apply Kernel Variables...
  344. Starting Apply Kernel Variables...
  345. [ 7.069925] systemd[1]: Starting Coldplug All udev Devices...
  346. Starting Coldplug All udev Devices...
  347. [ 7.099973] systemd[1]: Mounted Kernel Debug File System.
  348. [ OK ] Mounted 7.107307] systemd[1]: Mounted Kernel Trace File System.
  349. ;39mKernel Debug File System.[ 7.115482] systemd[1]: Mounted Temporary Directory (/tmp).
  350.  
  351. [ OK ] Mounted Kernel Trace File System systemd[1]: modprobe@configfs.service: Succeeded.
  352. [0m.
  353. [ OK ] Mounted[ 7.136064] systemd[1]: Finished Load Kernel Module configfs.
  354. Temporary Directory (/tmp).
  355. [ OK ] F[ 7.146028] systemd[1]: modprobe@drm.service: Succeeded.
  356. inished Load Kernel Modu[ 7.155608] systemd[1]: Finished Load Kernel Module drm.
  357. le configfs.
  358. [ OK ] Finished 7.164723] systemd[1]: modprobe@fuse.service: Succeeded.
  359. 0;1;39mLoad Kernel Module drm[ 7.173229] systemd[1]: Finished Load Kernel Module fuse.
  360. .
  361. [ OK ] Finished Load Kernel Module fuse.
  362. [ 7.248598] systemd[1]: Finished File System Check on Root Device.
  363. [ OK ] Finished File System Check on Root Device.
  364. [ 7.286361] systemd[1]: Started Journal Service.
  365. [ OK ] Started Journal Service.
  366. [ OK ] Finished Apply Kernel Variables.
  367. Mounting Kernel Configuration File System...
  368. Starting Remount Root and Kernel File Systems...
  369. [ OK ] Mounted Kernel Configuration File System.
  370. [ 7.464712] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: disabled.
  371. [ OK ] Finished Remount Root and Kernel File Systems.
  372. Starting Flush Journal to Persistent Storage...
  373. [ 7.564904] systemd-journald[161]: Received client request to flush runtime journal.
  374. Starting Create Static Device Nodes in /dev...
  375. [ OK ] Finished Flush Journal to Persistent Storage.
  376. [ OK ] Finished Create Static Device Nodes in /dev.
  377. [ OK ] Reached target Local File Systems (Pre).
  378. Mounting /var/volatile...
  379. Starting Rule-based Manage…for Device Events and Files...
  380. [ OK ] Mounted /var/volatile.
  381. [ OK ] Reached target Local File Systems.
  382. Starting Create Volatile Files and Directories...
  383. [ OK ] Started Rule-based Manager for Device Events and Files.
  384. Starting Network Service...
  385. [ OK ] Finished Create Volatile Files and Directories.
  386. Starting Network Time Synchronization...
  387. [ OK ] Started Network Service.
  388. Starting Network Name Resolution...
  389. [ OK ] Started Network Time Synchronization.
  390. [ OK ] Reached target System Time Set.
  391. [ OK ] Reached target System Time Synchronized.
  392. [ OK ] Started Network Name Resolution.
  393. [ OK ] Reached target Network.
  394. [ OK ] Reached target Host and Network Name Lookups.
  395. [ 9.876691] mtdblock: MTD device 'barebox' is NAND, please consider using UBI block devices instead.
  396. [ 9.876855] mtdblock: MTD device 'barebox-environment' is NAND, please consider using UBI block devices instead.
  397. [ 9.879676] mtdblock: MTD device 'root' is NAND, please consider using UBI block devices instead.
  398. [ OK ] Finished Coldplug All udev Devices.
  399. [ OK ] Reached target System Initialization.
  400. [ OK ] Started Daily Cleanup of Temporary Directories.
  401. [ OK ] Reached target Timers.
  402. [ OK ] Reached target Hardware activated USB gadget.
  403. [ OK ] Listening on D-Bus System Message Bus Socket.
  404. [ OK ] Reached target Sockets.
  405. [ OK ] Reached target Basic System.
  406. [ OK ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
  407. [ OK ] Started D-Bus System Message Bus.
  408. [ OK ] Started Getty on tty1.
  409. [ OK ] Started Serial Getty on ttymxc1.
  410. [ OK ] Reached target Login Prompts.
  411. Starting User Login Management...
  412. [ OK ] Started User Login Management.
  413. [ OK ] Reached target Multi-User System.
  414.  
  415. ____ _ _ __ __ _____ _____ ____
  416. | _ \ | | | |\ \ / /|_ _|| ____| / ___|
  417. | |_) || |_| | \ V / | | | _| | |
  418. | __/ | _ | | | | | | |___ | |___
  419. |_| |_| |_| |_| |_| |_____| \____|
  420.  
  421. _ __ __ ____ _ ___ ____ _ _ __ __
  422. / \ | \/ || _ \ | | |_ _|| _ \ | | | |\ \ / /
  423. / _ \ | |\/| || |_) || | | | | |_) || |_| | \ V /
  424. / ___ \ | | | || __/ | |___ | | | __/ | _ | | |
  425. /_/ \_\|_| |_||_| |_____||___||_| |_| |_| |_|
  426.  
  427.  
  428. ampliPHY (Phytec Base Distribution) BSP-Yocto-Ampliphy-i.MX6-PD21.1.1 phyboard-mira-imx6-3 ttymxc1
  429.  
  430. phyboard-mira-imx6-3 login:
  431.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!