Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <5>[ 0.000000] Linux version 2.6.35.14-jellaxy+ (lagloose@jellaxy-note) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #2 PREEMPT Thu Oct 4 23:47:36 CEST 2012
- <4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
- <4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
- <4>[ 0.000000] Machine: GT-S5830 Board
- <6>[ 0.000000] Partition (from atag) mibib -- Offset:0 Size:6
- <6>[ 0.000000] Partition (from atag) qcsbl -- Offset:6 Size:2
- <6>[ 0.000000] Partition (from atag) oemsbl -- Offset:8 Size:3
- <6>[ 0.000000] Partition (from atag) amss -- Offset:b Size:64
- <6>[ 0.000000] Partition (from atag) efs2 -- Offset:6f Size:24
- <6>[ 0.000000] Partition (from atag) nv_backup -- Offset:93 Size:14
- <6>[ 0.000000] Partition (from atag) arm11boot -- Offset:a7 Size:8
- <6>[ 0.000000] Partition (from atag) boot -- Offset:af Size:20
- <4>[ 0.000000] Cooper H/W revision : 0x05
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 84480
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c073999c, node_mem_map c0965000
- <7>[ 0.000000] Normal zone: 660 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 83820 pages, LIFO batch:15
- <6>[ 0.000000] allocating 28794880 bytes at c144a000 (14a4a000 physical) for mdp pmem arena
- <6>[ 0.000000] allocating 10346496 bytes at c2fc0000 (165c0000 physical) for adsp pmem arena
- <6>[ 0.000000] allocating 3072000 bytes at c399e000 (16f9e000 physical) for fb
- <6>[ 0.000000] allocating 114688 bytes at c3d00000 (17300000 physical) for kernel ebi1 pmem arena
- <3>[ 0.000000] smem_find(137, 64): wrong size 56
- <6>[ 0.000000] socinfo_init: v2, id=67, ver=1.3, raw_id=961, raw_ver=3
- <6>[ 0.000000] L210 cache controller enabled
- <1>[ 0.000000] Initialized strongly ordered page successfully
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 83820
- <5>[ 0.000000] Kernel command line: mem=330M console=NULL hw=5 fbaddr=0xf6000 salescode=EPL
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] Memory: 330MB = 330MB total
- <5>[ 0.000000] Memory: 279536k/279536k available, 58384k reserved, 0K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
- <5>[ 0.000000] vmalloc : 0xd5000000 - 0xfa000000 ( 592 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xd4a00000 ( 330 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc0030000 ( 160 kB)
- <5>[ 0.000000] .text : 0xc0030000 - 0xc06c2000 (6728 kB)
- <5>[ 0.000000] .data : 0xc06c2000 - 0xc0746a40 ( 531 kB)
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
- <6>[ 0.000000] NR_IRQS:261
- <6>[ 0.000000] sched_clock: 27 bits at 600kHz, resolution 1666ns, wraps every 223696ms
- <4>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000436] Calibrating delay loop... 398.95 BogoMIPS (lpj=1994752)
- <6>[ 0.210208] pid_max: default: 32768 minimum: 301
- <4>[ 0.210639] Mount-cache hash table entries: 512
- <6>[ 0.211323] Initializing cgroup subsys cpuacct
- <6>[ 0.211356] Initializing cgroup subsys freezer
- <6>[ 0.211379] Initializing cgroup subsys net_cls
- <6>[ 0.211426] CPU: Testing write buffer coherency: ok
- <6>[ 0.214664] NET: Registered protocol family 16
- <6>[ 0.215808] acpu_clock_init()
- <6>[ 0.215836] Shared PLL control available.
- <6>[ 0.216013] L val: PLL0: 50, PLL1: 12, PLL2: 41
- <6>[ 0.216179] ACPU running at 396800 KHz
- <6>[ 0.216213] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
- <6>[ 0.216261] 0 19200 -1 1 19200 1 30720 -1 -1 -1 5 4 6
- <6>[ 0.216304] 1 120000 0 8 60000 2 61440 -1 -1 -1 7 4 6
- <6>[ 0.216349] 2 122880 1 2 61440 2 61440 1 -1 -1 7 4 6
- <6>[ 0.216396] 3 200000 2 4 66667 3 61440 1 2 -1 7 4 6
- <6>[ 0.216441] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 8
- <6>[ 0.216486] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 9
- <6>[ 0.216531] 6 396800 2 2 198400 2 200000 1 2 3 7 -1 10
- <6>[ 0.216576] 7 480000 0 2 240000 2 200000 1 2 3 -1 -1 14
- <6>[ 0.216621] 8 614400 2 1 204800 3 200000 5 4 6 -1 -1 17
- <6>[ 0.216668] 9 672000 2 1 168000 4 200000 5 -1 6 -1 -1 17
- <6>[ 0.216713] 10 787200 2 1 262400 3 200000 7 -1 6 -1 -1 17
- <6>[ 0.216758] 11 806400 2 1 268800 3 200000 7 -1 8 -1 -1 17
- <6>[ 0.216804] 12 825600 2 1 275200 3 200000 7 -1 8 -1 -1 17
- <6>[ 0.216849] 13 844800 2 1 281600 3 200000 7 -1 8 -1 -1 17
- <6>[ 0.216894] 14 864000 2 1 288000 3 200000 7 -1 8 -1 -1 17
- <6>[ 0.216941] 15 883200 2 1 294400 3 200000 -1 -1 8 -1 -1 17
- <6>[ 0.216986] 16 902400 2 1 300800 3 200000 -1 -1 8 -1 -1 17
- <6>[ 0.217031] 17 921600 2 1 307200 3 200000 -1 -1 8 -1 -1 -1
- <6>[ 0.217058] 14 scaling frequencies supported.
- <6>[ 0.220056] msm7x2x_init : msm7x2x_init #####
- <3>[ 0.221378] Error configuraing GPIO_WLAN_HOST_WAKE
- <6>[ 0.221853] hw perfevents: enabled with v6 PMU driver, 3 counters available
- <4>[ 0.233143] bio: create slab <bio-0> at 0
- <5>[ 0.234599] SCSI subsystem initialized
- <6>[ 0.234888] usbcore: registered new interface driver usbfs
- <6>[ 0.235081] usbcore: registered new interface driver hub
- <6>[ 0.235313] usbcore: registered new device driver usb
- <6>[ 0.235858] i2c-gpio i2c-gpio.2: using pins 23 (SDA) and 30 (SCL)
- <6>[ 0.236161] i2c-gpio i2c-gpio.3: using pins 91 (SDA) and 90 (SCL)
- <6>[ 0.236688] i2c-gpio i2c-gpio.5: using pins 37 (SDA) and 36 (SCL)
- <6>[ 0.236838] msm_i2c_probe
- <6>[ 0.236979] msm_i2c_probe: clk_ctl 316, 384000 Hz
- <6>[ 0.238188] Advanced Linux Sound Architecture Driver Version 1.0.23.
- <6>[ 0.239016] Bluetooth: Core ver 2.15
- <6>[ 0.239123] NET: Registered protocol family 31
- <6>[ 0.239144] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.239174] Bluetooth: HCI socket layer initialized
- <6>[ 0.239419] Switching to clocksource dg_timer
- <6>[ 0.251778] NET: Registered protocol family 2
- <6>[ 0.252086] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.252929] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- <6>[ 0.253671] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.254153] TCP: Hash tables configured (established 16384 bind 16384)
- <6>[ 0.254181] TCP reno registered
- <6>[ 0.254208] UDP hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.254263] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- <6>[ 0.254599] NET: Registered protocol family 1
- <6>[ 0.255096] RPC: Registered udp transport module.
- <6>[ 0.255121] RPC: Registered tcp transport module.
- <6>[ 0.255143] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 0.255518] Trying to unpack rootfs image as initramfs...
- <6>[ 1.086323] Freeing initrd memory: 4388K
- <6>[ 1.088761] smd probe
- <6>[ 1.088799] smd_core_init()
- <6>[ 1.088933] smd_core_init() done
- <6>[ 1.088963] smd_alloc_loopback_channel: 'local_loopback' cid=100
- <6>[ 1.091103] smd_alloc_channel() 'DS' cid=0
- <6>[ 1.091328] smd_alloc_channel() 'DIAG' cid=1
- <6>[ 1.091516] smd_alloc_channel() 'RPCCALL' cid=2
- <6>[ 1.091683] smd_alloc_channel() 'DATA1' cid=7
- <6>[ 1.091866] smd_alloc_channel() 'DATA2' cid=8
- <6>[ 1.092028] smd_alloc_channel() 'DATA3' cid=9
- <6>[ 1.092198] smd_alloc_channel() 'DATA4' cid=10
- <6>[ 1.092363] smd_alloc_channel() 'DATA5' cid=11
- <6>[ 1.092528] smd_alloc_channel() 'DATA6' cid=12
- <6>[ 1.092709] smd_alloc_channel() 'DATA7' cid=13
- <6>[ 1.092878] smd_alloc_channel() 'DATA11' cid=17
- <6>[ 1.093056] smd_alloc_channel() 'DAL00' cid=38
- <6>[ 1.093223] smd_alloc_channel() 'DATA5_CNTL' cid=39
- <6>[ 1.093408] smd_alloc_channel() 'DATA6_CNTL' cid=40
- <6>[ 1.093596] smd_alloc_channel() 'DATA7_CNTL' cid=41
- <3>[ 1.093898] Notify: smsm init
- <6>[ 1.098251] SMD Packet Port Driver Initialized.
- <6>[ 1.099134] SMD: ch 2 0 -> 1
- <6>[ 1.099264] SMD: ch 2 1 -> 2
- <6>[ 1.099933] [adsp.c:adsp_init] rs3000000a -- 0
- <6>[ 1.101151] [audpp.c:audpp_probe] Number of decoder supported 5
- <6>[ 1.101183] [audpp.c:audpp_probe] Number of concurrency supported 8
- <6>[ 1.101211] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
- <6>[ 1.101236] [audpp.c:audpp_probe] queueid:13
- <6>[ 1.101259] [audpp.c:audpp_probe] decid:0
- <6>[ 1.101281] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 1.101304] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
- <6>[ 1.101329] [audpp.c:audpp_probe] queueid:14
- <6>[ 1.101351] [audpp.c:audpp_probe] decid:1
- <6>[ 1.101373] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 1.101396] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
- <6>[ 1.101421] [audpp.c:audpp_probe] queueid:15
- <6>[ 1.101444] [audpp.c:audpp_probe] decid:2
- <6>[ 1.101466] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 1.101489] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
- <6>[ 1.101514] [audpp.c:audpp_probe] queueid:16
- <6>[ 1.101536] [audpp.c:audpp_probe] decid:3
- <6>[ 1.101558] [audpp.c:audpp_probe] nr_codec_support:11
- <6>[ 1.101581] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
- <6>[ 1.101606] [audpp.c:audpp_probe] queueid:17
- <6>[ 1.101629] [audpp.c:audpp_probe] decid:4
- <6>[ 1.101651] [audpp.c:audpp_probe] nr_codec_support:1
- <4>[ 1.104033] [VIB] platform driver register result : 0
- <6>[ 1.129681] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 1.129696] tick = 69155
- <6>[ 1.129706] stamp = 0
- <3>[ 1.129744] /host2/home/theo/android/jellaxy/kernel/samsung/msm7x27/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <6>[ 1.139639] RPC_TIME_TOD_SET_APPS_BASES:
- <6>[ 1.139654] tick = 236480
- <6>[ 1.139664] stamp = 54193390534787072
- <3>[ 1.139701] /host2/home/theo/android/jellaxy/kernel/samsung/msm7x27/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- <6>[ 1.143429] ashmem: initialized
- <6>[ 1.146361] msgmni has been set to 554
- <6>[ 1.146703] alg: No test for cipher_null (cipher_null-generic)
- <6>[ 1.146956] alg: No test for ecb(cipher_null) (ecb-cipher_null)
- <6>[ 1.147153] alg: No test for digest_null (digest_null-generic)
- <6>[ 1.147341] alg: No test for compress_null (compress_null-generic)
- <6>[ 1.154214] alg: No test for stdrng (krng)
- <6>[ 1.279104] io scheduler noop registered
- <6>[ 1.279133] io scheduler deadline registered
- <6>[ 1.279336] io scheduler cfq registered
- <6>[ 1.279549] io scheduler bfq registered
- <6>[ 1.279573] io scheduler vr registered
- <6>[ 1.279594] io scheduler sio registered (default)
- <3>[ 1.280848] fbaddr cmdline is null
- <6>[ 1.281634] msm_fb_probe: phy_Addr = 0x16f9e000 virt = 0xd5400000
- <6>[ 1.282568] MDP HW Base phy_Address = 0xaa200000 virt = 0xd5100000
- <4>[ 1.283683] ++++++lcdc_s6d16a0x_panel_init
- <4>[ 1.283764] ++++++pdev->id=0
- <6>[ 1.284273] setting pdata->panel_info.fb_num to 3. type: 3
- <4>[ 1.319491] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
- <4>[ 1.319526] ==============++minhyodebug : LCD CONTROLLER Registers Setting
- <4>[ 1.319554] display_hctl = 0x1630024
- <4>[ 1.319571] display_v_start = 0xf62
- <4>[ 1.319586] display_v_end = 0x2aea1
- <4>[ 1.319601] lcdc_border_clr = 0x0
- <4>[ 1.319616] lcdc_underflow_clr = 0xff
- <4>[ 1.319633] lcdc_hsync_skew = 0x0
- <4>[ 1.319646] ctrl_polarity = 0x0
- <4>[ 1.319661] active_hctl = 0x0
- <4>[ 1.319674] active_v_start = 0x0
- <4>[ 1.319689] active_v_end = 0x0
- <4>[ 1.319721] pc_clk_set_rate id : 42, rate : 16384000
- <4>[ 1.319823] pc_clk_set_rate id : 0, rate : 16384000
- <4>[ 1.319838] , rc : 0
- <4>[ 1.319921] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_on
- <4>[ 1.320106] s6d16a0x_COOPER start s6d16a0x_disp_powerup
- <4>[ 1.401814] s6d16a0x_COOPER start determine_lcd_type
- <4>[ 1.402193] @@@@@ determine_lcd_type : read by SDI == AUO or SONY
- <4>[ 1.402218] ldi mtpdata: 6b 4c 10
- <4>[ 1.402233] lcd type is AUO
- <4>[ 1.402246] s6d16a0x_COOPER start s6d16a0x_disp_on
- <4>[ 1.402268] Cooper HW rev is 5, apply 5's init sequence
- <4>[ 1.531796] [HSIL] mdp_lcdc_on(340) mdp_lcdc_on end
- <4>[ 1.559574] [vt_event_post] event=8, old=0, new=0
- <4>[ 1.574293] Console: switching to colour frame buffer device 40x30
- <6>[ 1.585066] FrameBuffer[0] 320x480 size=1843200 bytes is registered successfully!
- <4>[ 1.585156] load_565rle_image_onfb: Can not open COOPER.rle
- <7>[ 1.585671] Registered led device: lcd-backlight
- <4>[ 1.585739] --lcdc_s6d16a0x_panel_init
- <6>[ 1.586601] [drm] Initialized drm 1.1.0 20060810
- <4>[ 1.588421] pc_clk_set_rate id : 8, rate : 128000000
- <4>[ 1.588494] pc_clk_set_rate id : -1, rate : 128000000
- <4>[ 1.588509] , rc : 0
- <6>[ 1.589153] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 1.590073] msm_serial: driver initialized
- <4>[ 1.590273] pc_clk_set_rate id : 34, rate : 7372800
- <4>[ 1.590358] pc_clk_set_rate id : 0, rate : 7372800
- <4>[ 1.590373] , rc : 0
- <6>[ 1.590508] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
- <4>[ 1.590999] pc_clk_set_rate id : 35, rate : 7372800
- <4>[ 1.591086] pc_clk_set_rate id : 0, rate : 7372800
- <4>[ 1.591101] , rc : 0
- <6>[ 1.591224] msm_serial_hs.1: ttyHS1 at MMIO 0xa0300000 (irq = 52) is a MSM HS UART
- <6>[ 1.591686] msm_serial_hs module loaded
- <6>[ 1.596924] brd: module loaded
- <6>[ 1.602411] loop: module loaded
- <6>[ 1.602634] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
- <6>[ 1.602768] pmem: Initializing pmem (user-space) as cached
- <6>[ 1.604719] pmem: Initializing pmem_adsp (user-space) as non-cached
- <6>[ 1.605888] sec_jack:sec_jack_probe : Registering jack driver
- <6>[ 1.606334] input: sec_jack as /devices/virtual/input/input0
- <6>[ 1.608078] PPP generic driver version 2.4.2
- <6>[ 1.608441] PPP Deflate Compression module registered
- <6>[ 1.608468] PPP BSD Compression module registered
- <6>[ 1.614561] PPP MPPE Compression module registered
- <6>[ 1.614601] NET: Registered protocol family 24
- <6>[ 1.614698] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 1.614733] CSLIP: code copyright 1989 Regents of the University of California.
- <4>[ 1.615788] smc91x: not found (-19).
- <4>[ 1.616014] rmnet_init
- <4>[ 1.623516] pc_clk_set_rate id : 36, rate : 60000000
- <4>[ 1.623593] pc_clk_set_rate id : -1, rate : 60000000
- <4>[ 1.623608] , rc : 0
- <3>[ 1.624211] msm_otg_probe: chg_init failed
- <6>[ 1.624461] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 1.624629] host driver registered w/ tranceiver
- <6>[ 1.624933] usbcore: registered new interface driver cdc_acm
- <6>[ 1.624959] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 1.625096] usbcore: registered new interface driver usb_ehset_test
- <6>[ 1.625533] peripheral driver registered w/ tranceiver
- <6>[ 1.626083] DUN is registerd
- <6>[ 1.626568] android_usb gadget: android_usb ready
- <6>[ 1.626791] f_acm init
- <6>[ 1.627583] acmdata_register
- <4>[ 1.630548] android_usb gadget: using random self ethernet address
- <4>[ 1.630603] android_usb gadget: using random host ethernet address
- <6>[ 1.631534] usb0: MAC 76:cd:c9:7d:78:44
- <6>[ 1.631559] usb0: HOST MAC ca:22:9f:45:a2:07
- <6>[ 1.631783] diagfwd initializing ..
- <6>[ 1.632343] SMD: ch 1 0 -> 1
- <6>[ 1.632368] diag opened SMD port ; r = 0
- <6>[ 1.632463] SMD: ch 1 1 -> 2
- <6>[ 1.632614] diagchar initializing ..
- <6>[ 1.632976] diagchar initialized
- <4>[ 1.633224] [TSP] synaptics_ts_init
- <4>[ 1.633563] [TSP] synaptics_ts_probe, 561
- <4>[ 1.659493] [BACLKIGHT] : 255
- <4>[ 1.659516] Platform V:255, Find V:32
- <4>[ 1.662534] LCD Baklight init - first boot time
- <4>[ 1.662561] LCD Backlight re-init - wakeup time tune:32, lcd:32
- <6>[ 2.339509] synaptics_ts_probe: max_x: 320, max_y: 480
- <6>[ 2.340026] input: sec_touchscreen as /devices/virtual/input/input1
- <4>[ 2.340358] [TSP] synaptics_ts_probe, irq=83
- <6>[ 2.340481] synaptics_ts_probe: Start touchscreen sec_touchscreen in interrupt mode
- <4>[ 2.343169] [TSP] synaptics_ts_probe: 669, buf[1]=4, buf[2]=6
- <4>[ 2.343198] [TSP] synaptics_ts_probe, ver CY=f0
- <4>[ 2.343219] [TSP] synaptics_ts_probe, ver HW=4
- <4>[ 2.343241] [TSP] synaptics_ts_probe, ver SW=6
- <6>[ 2.343264] synaptics_ts_probe: Manufacturer ID: f0, HW ver=4
- <4>[ 2.343558] [gpio_event_matrix_func:625] hw rev = 5
- <6>[ 2.343854] GPIO Matrix Keypad Driver: Start keypad matrix for sec_key in interrupt mode
- <6>[ 2.344344] input: sec_key as /devices/virtual/input/input2
- <7>[ 2.345791] RTC Registering with rs30000048
- <3>[ 2.347134] msm_rpc_client_req: RPC call was not successful (3)
- <7>[ 2.347173] msmrtc_setup_cb: RPC client registration for PROC:12 failed
- <7>[ 2.347203] rs30000048 rs30000048.65536: msmrtc_probe: Could not initialize RPC callback
- <6>[ 2.347948] using rtc device, msm_rtc, for alarms
- <7>[ 2.347979] msm_rtc: dev (254:0)
- <6>[ 2.348043] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
- <7>[ 2.348353] msm_rtc_secure: dev (254:1)
- <6>[ 2.348378] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
- <6>[ 2.348504] i2c /dev entries driver
- <6>[ 2.349839] [FSA9280]: probe
- <6>[ 2.349859] [FSA9280]: init
- <4>[ 2.351081] [FSA9280]: Initial control reg 0x02 : 0x1e
- <6>[ 2.369479] [FSA9280]: fsa9280 sensor init sequence done
- <6>[ 2.369601] [FSA9280]: probe complete
- <4>[ 2.370086] [bma_probe] slave addr = 8
- <6>[ 2.371751] Bosch Sensortec Device detected!
- <6>[ 2.371764] BMA220 registered I2C driver!
- <6>[ 2.372006] bma accel device create ok
- <4>[ 2.372198] registering lightsensor-level input device
- <6>[ 2.372601] input: accelerometer_sensor as /devices/virtual/input/input3
- <6>[ 2.374894] mmc31xx driver: init
- <3>[ 2.375163] [mmc31xx_probe] +
- <3>[ 2.389524] [mmc31xx_probe] -
- <6>[ 2.389629] ecompass driver: init
- <6>[ 2.390068] input: magnetic_sensor as /devices/virtual/input/input4
- <6>[ 2.390508] taos_opt_init
- <4>[ 2.390593] [taos_opt_probe] slave addr = 39
- <4>[ 2.416698] TAOS Device detected!
- <4>[ 2.416858] taos_opt_probe(719): Workqueue Settings complete
- <4>[ 2.419439] [TAOS] register irq = 91
- <4>[ 2.419513] [TAOS] register wakeup source = 0
- <4>[ 2.419538] taos_opt_probe(774): INT Settings complete
- <4>[ 2.419563] taos_off(504): taos_off(2)
- <4>[ 2.419866] taos_off(509): taos_off voltage down(2)
- <4>[ 2.419889] [TAOS] unregister irq = 91
- <4>[ 2.419909] [TAOS] register wakeup source = 0
- <4>[ 2.419931] taos_off(519): taos power off
- <4>[ 2.419953] taos_off(523): disable irq for proximity
- <4>[ 2.419974] taos_opt_probe is OK!!
- <6>[ 2.420081] Linux video capture interface: v2.00
- <4>[ 2.420406] config_camera_on_gpios --enter
- <4>[ 2.420981] [S5K4ECGX]s5k4ecgx_probe succeeded!
- <4>[ 2.421098] [S5K4ECGX]Camera Sensor Power ON [0 0]
- <4>[ 2.479829] pc_clk_set_rate id : 41, rate : 24000000
- <4>[ 2.480028] pc_clk_set_rate id : 0, rate : 24000000
- <4>[ 2.480043] , rc : 0
- <4>[ 2.480058] [S5K4ECGX]s5k4ecgx_probe_init_sensor()
- <4>[ 2.509493] [S5K4ECGX] s5k4ecgx_sensor_burst_write : s5k4ecgx_init_reg1_EVT1
- <4>[ 2.529504] [S5K4ECGX]Camera Sensor Power OFF
- <4>[ 2.529528] [S5K4ECGX]=========> Power OFF DELAY : 300ms
- <4>[ 2.597589] [config_buf] [364] usb_mass_storage
- <4>[ 2.598061] [config_buf] [364] usb_mass_storage
- <6>[ 2.600199] android_usb gadget: high speed config #1: android
- <4>[ 2.684403] msm_sync_init: initialized s5k4ecgx
- <4>[ 2.685244] ledflash_init
- <4>[ 2.685273] ledflash : major-230, minor-0
- <4>[ 2.685571] [Battery] msm_batt_init
- <3>[ 2.686203] [Battery] msm_batt_probe
- <6>[ 2.687918] batt_clnt_handle = 0
- <6>[ 2.688929] msm_batt_enable_filter: vbatt Filter enabled successfully.
- <3>[ 2.722071] [Battery] get_charger_type charger_type is (2)
- <4>[ 2.722104] [Battery] get_charger_type : wake_lock!!! !!!!
- <4>[ 2.722159] [Battery] Check VF value [0x0] (when first charger connected!)
- <4>[ 2.722419] [Battery] get_charging_status : event_flag =8
- <4>[ 2.722656] [Battery] Charging state is changed [ff]=>[5] Batt Level [3485] Percent [94]
- <6>[ 2.725653] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
- <6>[ 2.726083] device-mapper: multipath: version 1.1.1 loaded
- <6>[ 2.726114] device-mapper: multipath round-robin: version 1.0.0 loaded
- <6>[ 2.726143] device-mapper: multipath queue-length: version 0.1.0 loaded
- <6>[ 2.726171] device-mapper: multipath service-time: version 0.2.0 loaded
- <6>[ 2.726644] Bluetooth: HCI UART driver ver 2.2
- <6>[ 2.726671] Bluetooth: HCI H4 protocol initialized
- <6>[ 2.726693] Bluetooth: HCI BCSP protocol initialized
- <6>[ 2.727211] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- <6>[ 2.728816] [imoseyon] interactiveX enter
- <6>[ 2.729414] [imoseyon] brazilianwax enter
- <4>[ 2.730038] pc_clk_set_rate id : 19, rate : 144000
- <4>[ 2.730126] pc_clk_set_rate id : 0, rate : 144000
- <4>[ 2.730141] , rc : 0
- <6>[ 2.730971] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,113 dma 8
- <6>[ 2.731001] mmc0: 8 bit data mode disabled
- <6>[ 2.731023] mmc0: 4 bit data mode enabled
- <6>[ 2.731043] mmc0: polling status mode disabled
- <6>[ 2.731069] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- <6>[ 2.731096] mmc0: Slot eject status = 0
- <6>[ 2.731116] mmc0: Power save feature enable = 1
- <6>[ 2.731144] mmc0: DM non-cached buffer at ffc5d000, dma_addr 0x14457000
- <6>[ 2.731176] mmc0: DM cmd busaddr 0x14457000, cmdptr busaddr 0x14457300
- <4>[ 2.731429] pc_clk_set_rate id : 21, rate : 144000
- <4>[ 2.731504] pc_clk_set_rate id : 0, rate : 144000
- <4>[ 2.731519] , rc : 0
- <6>[ 2.732211] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
- <6>[ 2.732239] mmc1: 8 bit data mode disabled
- <6>[ 2.732259] mmc1: 4 bit data mode enabled
- <6>[ 2.732279] mmc1: polling status mode disabled
- <6>[ 2.732306] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- <6>[ 2.732331] mmc1: Slot eject status = 1
- <6>[ 2.732351] mmc1: Power save feature enable = 1
- <6>[ 2.732378] mmc1: DM non-cached buffer at ffc5e000, dma_addr 0x1445b000
- <6>[ 2.732408] mmc1: DM cmd busaddr 0x1445b000, cmdptr busaddr 0x1445b300
- <7>[ 2.733186] Registered led device: button-backlight
- <4>[ 2.733213] msm_pmic_led_probe misc_register(backlightnotification)
- <6>[ 2.735961] usbcore: registered new interface driver usbhid
- <6>[ 2.735988] usbhid: USB HID core driver
- <6>[ 2.839654]
- <6>[ 2.839668] ========== kernel thread : gaf-proc ==========
- <6>[ 2.839694] task_struct at c0e78cc0
- <6>[ 2.839714] thread_info at c0e88000
- <6>[ 2.839726]
- <6>[ 2.839741] saved_cpu_context at c0e8801c
- <6>[ 2.839773] c0e8801c r4 :c0e78cc0 r5 :c0e88000 r6 :c06d2b48 r7 :c06c5058
- <6>[ 2.839809] c0e8802c r8 :00000000 r9 :d3d61c60 r10:c06d2b48 r11:c0e89f0c
- <6>[ 2.839841] c0e8803c sp :c0e89ed8 pc :c04e0b04
- <6>[ 2.839854]
- <6>[ 2.839874] searching saved pc which is stopped in schedule_timeout() from c0e89ed8 to c0e8a000
- <6>[ 2.839909] schedule_timeout() is from c04e1260 to c04e1468
- <6>[ 2.839924]
- <6>[ 2.839944] pc (c04e1284) is found at c0e89edc
- <6>[ 2.839974] c0e89eb0 r4 :xxxxxxxx r5 :c0e89ec0 r6 :c00be498 r7 :c00be424
- <6>[ 2.840011] c0e89ec0 r8 :00000000 r9 :c06d2b48 r10:c0e89f0c r11:c0e89ed8
- <6>[ 2.840048] c0e89ed0 r12:c0030d64 sp :c00be484 lr :c0e89efc pc :c04e1284
- <6>[ 2.840073] ===================
- <6>[ 2.840083]
- <6>[ 2.840388] logger: created 512K log 'log_main'
- <6>[ 2.840619] logger: created 256K log 'log_events'
- <6>[ 2.840838] logger: created 256K log 'log_radio'
- <6>[ 2.841066] logger: created 256K log 'log_system'
- <4>[ 2.843566] [Silent Value] : 0
- <4>[ 2.844586] No device for DAI CODEC_DAI
- <4>[ 2.844613] No device for DAI CPU_DAI
- <3>[ 2.844964] msm_soc: create pcms
- <6>[ 2.845434] asoc: CODEC_DAI <-> CPU_DAI mapping ok
- <3>[ 2.845461] msm_soc: ALSA MSM Mixer Setting
- <6>[ 2.846551] ALSA device list:
- <6>[ 2.846576] #0: msm-audio (MSM-CARD)
- <6>[ 2.846761] Netfilter messages via NETLINK v0.30.
- <6>[ 2.846909] nf_conntrack version 0.5.0 (4436 buckets, 17744 max)
- <4>[ 2.847401] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- <4>[ 2.847431] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- <4>[ 2.847459] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- <6>[ 2.847633] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 2.847661] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 2.847864] xt_time: kernel timezone is -0000
- <6>[ 2.847976] IPv4 over IPv4 tunneling driver
- <6>[ 2.848869] GRE over IPv4 tunneling driver
- <6>[ 2.850153] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.850514] TCP cubic registered
- <6>[ 2.851133] NET: Registered protocol family 10
- <6>[ 2.855136] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 2.855441] IPv6 over IPv4 tunneling driver
- <6>[ 2.856754] NET: Registered protocol family 17
- <6>[ 2.856839] NET: Registered protocol family 15
- <6>[ 2.857106] Bluetooth: L2CAP ver 2.14
- <6>[ 2.857129] Bluetooth: L2CAP socket layer initialized
- <6>[ 2.857168] Bluetooth: SCO (Voice Link) ver 0.6
- <6>[ 2.857188] Bluetooth: SCO socket layer initialized
- <6>[ 2.857351] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 2.857388] Bluetooth: RFCOMM socket layer initialized
- <6>[ 2.857411] Bluetooth: RFCOMM ver 1.11
- <6>[ 2.857434] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- <6>[ 2.857458] Bluetooth: BNEP filters: protocol multicast
- <6>[ 2.857483] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 2.861941] cpufreq: cpu0 init at 396800 switching to 320000
- <6>[ 2.862868] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- <7>[ 2.870699] msmrtc_tod_proc_result: 10/07/2012 14:55:31 (06)
- <6>[ 2.870784] rs30000048 rs30000048.65536: setting system clock to 2012-10-07 14:55:31 UTC (1349621731)
- <6>[ 2.870834] msm_v4l2: msm_v4l2_init
- <4>[ 2.871974] multipdp_init:multipdp_rx_noti_regi calling
- <4>[ 2.877876] Warning: unable to open an initial console.
- <6>[ 2.877999] Freeing init memory: 160K
- <4>[ 2.984454] pdp_activate(): ttyCSD(id: 1) serial device is created.
- <4>[ 2.984671] pdp_activate(): ttyEFS(id: 8) serial device is created.
- <4>[ 2.984859] pdp_activate(): ttyGPS(id: 5) serial device is created.
- <4>[ 2.985034] pdp_activate(): ttyXTRA(id: 6) serial device is created.
- <4>[ 2.985214] pdp_activate(): ttySMD(id: 25) serial device is created.
- <4>[ 3.014346] [vt_ioctl] console=0 cmd=4b3a fg_console=0
- <3>[ 3.014449] init: cannot open '/initlogo.rle'
- <4>[ 3.014506] [vt_ioctl] console=0 cmd=4b3a fg_console=0
- <4>[ 3.037901] [vt_event_post] event=4, old=0, new=0
- <3>[ 3.055811] fsr: version magic '2.6.35.7-perf-CL783107 preempt mod_unload ARMv6 ' should be '2.6.35.14-jellaxy+ preempt mod_unload ARMv6 '
- <4>[ 3.055846] fsr: magic: kernel tainted.
- <4>[ 3.055858] Disabling lock debugging due to kernel taint
- <4>[ 3.059993] fsr: module license 'Samsung Proprietary' taints kernel.
- <6>[ 3.079518]
- <6>[ 3.079529] Charger Type: STD DOWNSTREAM PORT
- <4>[ 3.087861] pc_clk_set_rate id : 19, rate : 49152000
- <4>[ 3.087969] pc_clk_set_rate id : 0, rate : 49152000
- <4>[ 3.087981] , rc : 0
- <4>[ 3.088169] mmc0: host does not support reading read-only switch. assuming write-enable.
- <6>[ 3.088214] mmc0: new high speed SDHC card at address b368
- <6>[ 3.099551] mmcblk0: mmc0:b368 SD 15.4 GiB
- <6>[ 3.100209] mmcblk0: p1 p2 p3
- <4>[ 3.124498] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
- <4>[ 3.124519] [PAM:aaaaaaaa ] ++FSR_PAM_Init
- <4>[ 3.124566] [PAM: ] --FSR_PAM_Init
- <4>[ 3.124708] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 3.124743] [OND:INF] FSR_OND_4K_Open(nDev:0, pParam:0xd4619e28, nFlag:0x00000000) / 1088 line
- <4>[ 3.124761] pstOND4kCxt->nBaseAddr: 0x00000000
- <4>[ 3.124781] nDev=0, nMID=0x00ec, nDID=0x0050, nVID=0x0241
- <4>[ 3.124801] [OND:INF] pstOND4kCxt->nSysConf1:0x80fe / 1171 line
- <4>[ 3.124818] [OND:INF] pstOND4kCxt->nBlksForSLCArea[0]:2048 / 1188 line
- <4>[ 3.124844] [OND:INF] pstOND4kCxt->nIntID :0x0000 / 1291 line
- <4>[ 3.124858] [OND:INF] 1X_CACHEPGM CMD : 0x007f
- <4>[ 3.124869] [OND:INF] 1X_PLOAD CMD : 0x0003
- <4>[ 3.125278] [BBM:INF] Scan from 2004 to 2047 to find BML meta blocks (die: 0)
- <4>[ 3.125591] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 3.128451] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 3.131361] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 3.134221] [BBM:INF] ffff ffff ffff ffff ffff ffff ffff ffff ffff ffff
- <4>[ 3.137079] [BBM:INF] a5a5 a5a5 ffff
- <4>[ 3.185153] [BBM: ] << DevNO:0, DieNO: 0 MAPPING INFORMATION >>
- <4>[ 3.185168] [BBM: ] Bad Mark Information
- <4>[ 3.185181] [BBM: ] - Bad Mark (0x2222) by erase error
- <4>[ 3.185194] [BBM: ] - Bad Mark (0x4444) by write error
- <4>[ 3.185209] [BBM: ] << Total : 0 BAD-MAPPING INFORMATION >>
- <4>[ 3.185224] [BIF: ] nPartition Information (nVol : 0)
- <4>[ 3.185236] nVer : 0x10000
- <4>[ 3.185253] 00 / nID:0x01 / nAttr:0x00001012 / 1stVun: 0 / Units: 6
- <4>[ 3.185273] 01 / nID:0x02 / nAttr:0x00001012 / 1stVun: 6 / Units: 2
- <4>[ 3.185293] 02 / nID:0x03 / nAttr:0x00001012 / 1stVun: 8 / Units: 3
- <4>[ 3.185313] 03 / nID:0x04 / nAttr:0x00001012 / 1stVun: 11 / Units: 100
- <4>[ 3.185333] 04 / nID:0x23 / nAttr:0x00001101 / 1stVun: 111 / Units: 36
- <4>[ 3.185354] 05 / nID:0x25 / nAttr:0x00001101 / 1stVun: 147 / Units: 20
- <4>[ 3.185374] 06 / nID:0x05 / nAttr:0x00001012 / 1stVun: 167 / Units: 8
- <4>[ 3.185394] 07 / nID:0x06 / nAttr:0x00001012 / 1stVun: 175 / Units: 32
- <4>[ 3.185414] 08 / nID:0x07 / nAttr:0x00001012 / 1stVun: 207 / Units: 32
- <4>[ 3.185436] 09 / nID:0x08 / nAttr:0x00001012 / 1stVun: 239 / Units: 3
- <4>[ 3.185456] 10 / nID:0x09 / nAttr:0x00001001 / 1stVun: 242 / Units: 24
- <4>[ 3.185476] 11 / nID:0x21 / nAttr:0x00001101 / 1stVun: 266 / Units: 869
- <4>[ 3.185496] 12 / nID:0x22 / nAttr:0x00001101 / 1stVun: 1135 / Units: 753
- <4>[ 3.185518] 13 / nID:0x24 / nAttr:0x00001101 / 1stVun: 1888 / Units: 116
- <4>[ 3.185556] [BBM:INF] The registered blocks in ERL are handled
- <4>[ 3.185571] [BBM:INF] (number of blocks: 0)
- <4>[ 3.194174] BML: Registered BML Driver.
- <4>[ 3.194193] [fsr_init] BML functions for DGS are initialized
- <3>[ 3.208249] fsr_stl: version magic '2.6.35.7-perf-CL783107 preempt mod_unload ARMv6 ' should be '2.6.35.14-jellaxy+ preempt mod_unload ARMv6 '
- <4>[ 3.243934] [BIF:IN ] ++FSR_BML_Init(nFlag: 0x0)
- <4>[ 3.243961] [BIF: ] FSR_BML_Init(nFlag:0x0, nRe:FSR_BML_ALREADY_INITIALIZED) / 1027 line
- <4>[ 3.252326] FSR: Registered STL Driver.
- <3>[ 3.270493] rfs_glue: version magic '2.6.35.7-perf-CL260130 preempt mod_unload ARMv6 ' should be '2.6.35.14-jellaxy+ preempt mod_unload ARMv6 '
- <3>[ 3.394319] rfs_fat: version magic '2.6.35.7-perf-CL260130 preempt mod_unload ARMv6 ' should be '2.6.35.14-jellaxy+ preempt mod_unload ARMv6 '
- <3>[ 3.457636] sec_param: version magic '2.6.35.7-perf-CL783107 preempt mod_unload ARMv6 ' should be '2.6.35.14-jellaxy+ preempt mod_unload ARMv6 '
- <3>[ 3.463799] init: Unable to open persistent property directory /data/property errno: 2
- <4>[ 3.471534] [vt_ioctl] console=0 cmd=4b3a fg_console=0
- <4>[ 3.499473] [BACLKIGHT] : 0
- <4>[ 3.499488] Platform V:0, Find V:0
- <4>[ 3.502469] LCD Backlight OFF. tune:0,lcd:0
- <4>[ 3.502481] [HSIL] mdp_lcdc_off(355) mdp_lcdc_off start
- <4>[ 3.502501] [HSIL] mdp_lcdc_off(378) mdp_lcdc_off end
- <4>[ 3.502514] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_off
- <4>[ 3.640608] s6d16a0x_COOPER start s6d16a0x_disp_powerdown
- <4>[ 3.719626] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
- <4>[ 3.719726] ==============++minhyodebug : LCD CONTROLLER Registers Setting
- <4>[ 3.719818] display_hctl = 0x1630024
- <4>[ 3.719868] display_v_start = 0xf62
- <4>[ 3.719919] display_v_end = 0x2aea1
- <4>[ 3.719968] lcdc_border_clr = 0x0
- <4>[ 3.720016] lcdc_underflow_clr = 0xff
- <4>[ 3.720066] lcdc_hsync_skew = 0x0
- <4>[ 3.720114] ctrl_polarity = 0x0
- <4>[ 3.720159] active_hctl = 0x0
- <4>[ 3.720204] active_v_start = 0x0
- <4>[ 3.720251] active_v_end = 0x0
- <4>[ 3.721251] pc_clk_set_rate id : 42, rate : 16384000
- <4>[ 3.721419] pc_clk_set_rate id : 0, rate : 16384000
- <4>[ 3.721466] , rc : 0
- <4>[ 3.721614] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_on
- <4>[ 3.721939] s6d16a0x_COOPER start s6d16a0x_disp_powerup
- <7>[ 3.825656] diag: USB disconnected
- <4>[ 3.831393] s6d16a0x_COOPER start s6d16a0x_disp_on
- <4>[ 3.831479] Cooper HW rev is 5, apply 5's init sequence
- <4>[ 3.974433] [config_buf] [364] acm
- <4>[ 3.974496] [config_buf] [364] acm
- <4>[ 3.974559] [config_buf] [364] diag
- <4>[ 3.974626] [config_buf] [364] usb_mass_storage
- <4>[ 3.974696] [config_buf] [364] adb
- <4>[ 3.975254] [config_buf] [364] acm
- <4>[ 3.975311] [config_buf] [364] acm
- <4>[ 3.975371] [config_buf] [364] diag
- <4>[ 3.975434] [config_buf] [364] usb_mass_storage
- <4>[ 3.975501] [config_buf] [364] adb
- <6>[ 3.978743] android_usb gadget: high speed config #1: android
- <4>[ 3.978824] acm_set_alt 423
- <4>[ 3.978903] acm_disconnected
- <4>[ 3.978953] acm_set_alt 438
- <7>[ 3.979176] diag: USB connected
- <4>[ 4.159606] [HSIL] mdp_lcdc_on(340) mdp_lcdc_on end
- <4>[ 4.229659] [BACLKIGHT] : 0
- <4>[ 4.229723] Platform V:0, Find V:0
- <4>[ 4.232803] LCD Backlight OFF. tune:0,lcd:0
- <4>[ 4.232871] [HSIL] mdp_lcdc_off(355) mdp_lcdc_off start
- <4>[ 4.232966] [HSIL] mdp_lcdc_off(378) mdp_lcdc_off end
- <4>[ 4.233034] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_off
- <4>[ 4.289689] [BACLKIGHT] : 255
- <4>[ 4.289748] Platform V:255, Find V:32
- <4>[ 4.289816] LCD Backlight re-init - wakeup time tune:32, lcd:32
- <4>[ 4.369973] s6d16a0x_COOPER start s6d16a0x_disp_powerdown
- <4>[ 4.449624] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
- <4>[ 4.449724] ==============++minhyodebug : LCD CONTROLLER Registers Setting
- <4>[ 4.449814] display_hctl = 0x1630024
- <4>[ 4.449864] display_v_start = 0xf62
- <4>[ 4.449916] display_v_end = 0x2aea1
- <4>[ 4.449964] lcdc_border_clr = 0x0
- <4>[ 4.450013] lcdc_underflow_clr = 0xff
- <4>[ 4.450063] lcdc_hsync_skew = 0x0
- <4>[ 4.450109] ctrl_polarity = 0x0
- <4>[ 4.450156] active_hctl = 0x0
- <4>[ 4.450201] active_v_start = 0x0
- <4>[ 4.450246] active_v_end = 0x0
- <4>[ 4.451279] pc_clk_set_rate id : 42, rate : 16384000
- <4>[ 4.451468] pc_clk_set_rate id : 0, rate : 16384000
- <4>[ 4.451514] , rc : 0
- <4>[ 4.451663] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_on
- <4>[ 4.451981] s6d16a0x_COOPER start s6d16a0x_disp_powerup
- <4>[ 4.559668] s6d16a0x_COOPER start s6d16a0x_disp_on
- <4>[ 4.559744] Cooper HW rev is 5, apply 5's init sequence
- <4>[ 4.889624] [HSIL] mdp_lcdc_on(340) mdp_lcdc_on end
- <4>[ 4.987206] fsg_setup 631 w_index = 3 fsg->interface_number 3
- <4>[ 5.019526] [BACLKIGHT] : 255
- <4>[ 5.019546] Platform V:255, Find V:32
- <4>[ 5.219791] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 5.219828] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1171 line
- <4>[ 5.219916] [SIF:INF] ===> STL Clst[ 4] Scan Root Info
- <4>[ 5.221043] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Meta
- <4>[ 5.222874] [SIF:INF] Latest Header Index ( 1) Vbn ( 21)
- <4>[ 5.228066] [SIF:INF] Latest Header Clean Page Offset ( 16)
- <4>[ 5.228081] [SIF:INF] POR write timer : 0x552
- <4>[ 5.228389] [SIF:INF] Latest Context BlockIdx ( 1) Offset ( 15) Vpn ( 1359)
- <4>[ 5.228721] [SIF:INF] Number of Free Block ( 2)
- <4>[ 5.228734] [SIF:INF] Active Log List : Num ( 6)
- <4>[ 5.228751] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Post
- <4>[ 5.230418] [SIF:INF] ===> STL Zone[ 4, 0] Validity check
- <4>[ 5.230446] [SIF:INF] Partition [0, 24] open is success
- <4>[ 5.234696] [SIF:INF] Zone[ 4, 0]: nDgn( 0) nVbn( 71) S( 0)-E( 10) nCPOffs( 11)
- <4>[ 5.238099] [SIF:INF] Zone[ 4, 0]: nDgn( 17) nVbn( 23) S( 0)-E( 6) nCPOffs( 7)
- <4>[ 5.239048] [SIF:INF] Zone[ 4, 0]: nDgn( 100) nVbn( 91) S( 0)-E( 0) nCPOffs( 1)
- <4>[ 5.243223] [SIF:INF] Zone[ 4, 0]: nDgn( 1) nVbn( 41) S( 0)-E( 10) nCPOffs( 11)
- <4>[ 5.243253] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 24) nVbn( 87) nCPOffs( 64)
- <4>[ 5.246481] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 0) nVbn( 71) nCPOffs( 64)
- <4>[ 5.247034] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 17) nVbn( 23) nCPOffs( 64)
- <4>[ 5.247523] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 100) nVbn( 91) nCPOffs( 64)
- <4>[ 5.248011] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 1) nVbn( 41) nCPOffs( 64)
- <4>[ 5.252801] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 2) nVbn( 3) nCPOffs( 64)
- <4>[ 5.253366] [SIF:OUT] --FSR_STL_FlushAllMetaInfo()
- <4>[ 5.253399] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 1)
- <4>[ 5.254436] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 5.254464] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:2) / 1171 line
- <4>[ 5.254536] [SIF:INF] ===> STL Clst[ 4] Scan Root Info
- <4>[ 5.255643] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Meta
- <4>[ 5.257394] [SIF:INF] Latest Header Index ( 0) Vbn ( 31)
- <4>[ 5.260393] [SIF:INF] Latest Header Clean Page Offset ( 9)
- <4>[ 5.260409] [SIF:INF] POR write timer : 0x553
- <4>[ 5.260716] [SIF:INF] Latest Context BlockIdx ( 0) Offset ( 8) Vpn ( 1992)
- <4>[ 5.261048] [SIF:INF] Number of Free Block ( 2)
- <4>[ 5.261061] [SIF:INF] Active Log List : Num ( 0)
- <4>[ 5.261078] [SIF:INF] ===> STL Zone[ 4, 0] Open Zone Post
- <4>[ 5.261096] [SIF:INF] ===> STL Zone[ 4, 0] Validity check
- <4>[ 5.261119] [SIF:INF] Partition [0, 24] open is success
- <6>[ 5.326404] EXT4-fs (stl14): recovery complete
- <6>[ 5.326729] EXT4-fs (stl14): mounted filesystem with ordered data mode. Opts:
- <4>[ 10.762253] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 10.762303] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1171 line
- <4>[ 11.541813] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
- <4>[ 11.574051] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 11.574086] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1171 line
- <4>[ 12.344526] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
- <4>[ 12.378358] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 12.378393] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1171 line
- <4>[ 12.378456] [SIF:INF] ===> STL Clst[ 1] Scan Root Info
- <4>[ 12.379653] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Meta
- <4>[ 12.392678] [SIF:INF] Latest Header Index ( 13) Vbn ( 15)
- <4>[ 12.396584] [SIF:INF] Latest Header Clean Page Offset ( 13)
- <4>[ 12.396599] [SIF:INF] POR write timer : 0x67d
- <4>[ 12.397194] [SIF:INF] Latest Context BlockIdx ( 13) Offset ( 12) Vpn ( 972)
- <4>[ 12.397524] [SIF:INF] Number of Free Block ( 2)
- <4>[ 12.397539] [SIF:INF] Active Log List : Num ( 8)
- <4>[ 12.397556] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Post
- <4>[ 12.399666] [SIF:INF] ===> STL Zone[ 1, 0] Validity check
- <4>[ 12.399696] [SIF:INF] Partition [0, 21] open is success
- <4>[ 12.402431] [SIF:INF] Zone[ 1, 0]: nDgn( 0) nVbn( 243) S( 0)-E( 5) nCPOffs( 6)
- <4>[ 12.405589] [SIF:INF] Zone[ 1, 0]: nDgn( 705) nVbn( 519) S( 0)-E( 6) nCPOffs( 7)
- <4>[ 12.406854] [SIF:INF] Zone[ 1, 0]: nDgn( 512) nVbn( 27) S( 0)-E( 1) nCPOffs( 2)
- <4>[ 12.408111] [SIF:INF] Zone[ 1, 0]: nDgn( 6) nVbn( 822) S( 0)-E( 1) nCPOffs( 2)
- <4>[ 12.408136] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 193) nVbn( 379) nCPOffs( 64)
- <4>[ 12.412303] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 705) nVbn( 519) nCPOffs( 64)
- <4>[ 12.412781] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 0) nVbn( 243) nCPOffs( 64)
- <4>[ 12.413268] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 202) nVbn( 361) nCPOffs( 64)
- <4>[ 12.413756] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 512) nVbn( 27) nCPOffs( 64)
- <4>[ 12.414244] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 203) nVbn( 339) nCPOffs( 64)
- <4>[ 12.414731] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 6) nVbn( 822) nCPOffs( 64)
- <4>[ 12.419058] [SIF:INF] INACTIVATED LOG BLOCKS nDgn( 204) nVbn( 588) nCPOffs( 64)
- <4>[ 12.419593] [SIF:OUT] --FSR_STL_FlushAllMetaInfo()
- <4>[ 12.419628] [BIF: ] FSR_BML_Close(nVol: 0, nFlag: 0x0, nOpenCnt: 2)
- <4>[ 12.420663] [BIF: ] FSR VERSION: FSR_1.2.1p1_b139_RTM
- <4>[ 12.420691] [BIF: ] FSR_BML_Open(nVol:0, nFlag:0x0, nOpenCnt:3) / 1171 line
- <4>[ 12.420738] [SIF:INF] ===> STL Clst[ 1] Scan Root Info
- <4>[ 12.421841] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Meta
- <4>[ 12.434794] [SIF:INF] Latest Header Index ( 9) Vbn ( 11)
- <4>[ 12.437069] [SIF:INF] Latest Header Clean Page Offset ( 8)
- <4>[ 12.437084] [SIF:INF] POR write timer : 0x67e
- <4>[ 12.437673] [SIF:INF] Latest Context BlockIdx ( 9) Offset ( 7) Vpn ( 711)
- <4>[ 12.438001] [SIF:INF] Number of Free Block ( 2)
- <4>[ 12.438016] [SIF:INF] Active Log List : Num ( 0)
- <4>[ 12.438031] [SIF:INF] ===> STL Zone[ 1, 0] Open Zone Post
- <4>[ 12.438049] [SIF:INF] ===> STL Zone[ 1, 0] Validity check
- <4>[ 12.438073] [SIF:INF] Partition [0, 21] open is success
- <6>[ 12.455768] EXT4-fs (stl12): mounted filesystem with ordered data mode. Opts:
- <3>[ 12.699563] [Battery] msm_batt_check_event (init_skip)
- <3>[ 22.719578] [Battery] msm_batt_check_event
- <4>[ 22.719801] [Battery] chg_en & prevVal
- <3>[ 32.739543] [Battery] msm_batt_check_event
- <4>[ 32.739764] [Battery] chg_en & prevVal
- <4>[ 33.485261] [vt_ioctl] console=0 cmd=4b3a fg_console=0
- <4>[ 33.519489] [BACLKIGHT] : 0
- <4>[ 33.519508] Platform V:0, Find V:0
- <4>[ 33.522541] LCD Backlight OFF. tune:0,lcd:0
- <4>[ 33.522559] [HSIL] mdp_lcdc_off(355) mdp_lcdc_off start
- <4>[ 33.522591] [HSIL] mdp_lcdc_off(378) mdp_lcdc_off end
- <4>[ 33.522609] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_off
- <4>[ 33.659916] s6d16a0x_COOPER start s6d16a0x_disp_powerdown
- <4>[ 33.739629] [HSIL] mdp_lcdc_on(118) mdp_lcdc_on start
- <4>[ 33.739729] ==============++minhyodebug : LCD CONTROLLER Registers Setting
- <4>[ 33.739821] display_hctl = 0x1630024
- <4>[ 33.739873] display_v_start = 0xf62
- <4>[ 33.739923] display_v_end = 0x2aea1
- <4>[ 33.739973] lcdc_border_clr = 0x0
- <4>[ 33.740021] lcdc_underflow_clr = 0xff
- <4>[ 33.740071] lcdc_hsync_skew = 0x0
- <4>[ 33.740119] ctrl_polarity = 0x0
- <4>[ 33.740164] active_hctl = 0x0
- <4>[ 33.740211] active_v_start = 0x0
- <4>[ 33.740258] active_v_end = 0x0
- <4>[ 33.741269] pc_clk_set_rate id : 42, rate : 16384000
- <4>[ 33.741453] pc_clk_set_rate id : 0, rate : 16384000
- <4>[ 33.741499] , rc : 0
- <4>[ 33.741649] s6d16a0x_COOPER start lcdc_s6d16a0x_panel_on
- <4>[ 33.741968] s6d16a0x_COOPER start s6d16a0x_disp_powerup
- <4>[ 33.849631] s6d16a0x_COOPER start s6d16a0x_disp_on
- <4>[ 33.849708] Cooper HW rev is 5, apply 5's init sequence
- <4>[ 34.179598] [HSIL] mdp_lcdc_on(340) mdp_lcdc_on end
- <4>[ 34.309564] [BACLKIGHT] : 255
- <4>[ 34.309586] Platform V:255, Find V:32
- <4>[ 34.309606] LCD Backlight re-init - wakeup time tune:32, lcd:32
- <3>[ 42.761224] [Battery] msm_batt_check_event
- <4>[ 42.761531] [Battery] chg_en & prevVal
- <3>[ 52.779739] [Battery] msm_batt_check_event
- <4>[ 52.780096] [Battery] chg_en & prevVal
Add Comment
Please, Sign In to add comment