Starting kernel ...

- UART enabled -
- CPU 00000000 booting -
- Xen starting in Hyp mode -
- Zero BSS -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) Checking for initrd in /chosen
(XEN) RAM: 0000000080000000 - 00000000ffffffff
(XEN)
(XEN) MODULE[0]: 000000008ffdd000 - 000000008fffd000 Device Tree
(XEN) MODULE[1]: 0000000084000000 - 000000008411e7c0 Ramdisk
(XEN) MODULE[2]: 0000000082000000 - 0000000082874200 Kernel
(XEN)  RESVD[0]: 0000000083000000 - 0000000083020000
(XEN)  RESVD[1]: 000000008ffdd000 - 000000008fffd000
(XEN)
(XEN) CMDLINE[0000000082000000]:chosen rw root=/dev/ram rdinit=/sbin/init console=hvc0 initrd=0x84000000,32M earlyprintk=t
(XEN)
(XEN) Command line:
(XEN) Xen heap: 00000000fc000000-0000000100000000 (16384 pages)
(XEN) Dom heap: 507904 pages
(XEN) Domain heap initialised
(XEN) Booting using Device Tree
(XEN) Platform: TI DRA7
(XEN) Taking dtuart configuration from /chosen/stdout-path
(XEN) Looking for dtuart at "/ocp/interconnect@48000000/segment@0/target-module@20000/serial@0", options ""
(XEN) omap-uart: Unable to retrieve the IRQ
(XEN) Unable to initialize dtuart: -22
(XEN) Bad console= option 'dtuart'
 Xen 4.13-unstable
(XEN) Xen version 4.13-unstable (reprofy@local) (arm-linux-gnueabihf-gcc (Debian 8.3.0-2) 8.3.0) debug=y  Wed Jun 19 23:59
(XEN) Latest ChangeSet: Wed Jun 19 15:47:31 2019 +0200 git:2d76ae7aac-dirty
(XEN) build-id: 424fd28e99de2ea54de82c654f2c29b039003295
(XEN) Processor: 412fc0f2: "ARM Limited", variant: 0x2, part 0xc0f, rev 0x2
(XEN) 32-bit Execution:
(XEN)   Processor Features: 00001131:00011011
(XEN)     Instruction Sets: AArch32 A32 Thumb Thumb-2 ThumbEE Jazelle
(XEN)     Extensions: GenericTimer Security
(XEN)   Debug Features: 02010555
(XEN)   Auxiliary Features: 00000000
(XEN)   Memory Model Features: 10201105 20000000 01240000 02102211
(XEN)  ISA Features: 02101110 13112111 21232041 11112131 10011142 00000000
(XEN) Set AuxCoreBoot1 to 000000008500004c (0020004c)
(XEN) Set AuxCoreBoot0 to 0x20
(XEN) SMP: Allowing 2 CPUs
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 0 KHz
(XEN) GICv2 initialization:
(XEN)         gic_dist_addr=0000000048211000
(XEN)         gic_cpu_addr=0000000048212000
(XEN)         gic_hyp_addr=0000000048214000
(XEN)         gic_vcpu_addr=0000000048216000
(XEN)         gic_maintenance_irq=25
(XEN) GICv2: 192 lines, 2 cpus, secure (IID 0000043b).
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Initializing Credit2 scheduler
(XEN)  load_precision_shift: 18
(XEN)  load_window_shift: 30
(XEN)  underload_balance_tolerance: 0
(XEN)  overload_balance_tolerance: -3
(XEN)  runqueues arrangement: socket
(XEN)  cap enforcement granularity: 10ms
(XEN) load tracking window length 1073741824 ns
(XEN) Adding cpu 0 to runqueue 0
(XEN)  First cpu on runqueue, activating
(XEN) Allocated console ring of 16 KiB.
(XEN) VFP implementer 0x41 architecture 4 part 0x30 variant 0xf rev 0x0
(XEN) Bringing up CPU1
- CPU 00000001 booting -
- Xen starting in Hyp mode -
- Setting up control registers -
- Turning on paging -
- Ready -
(XEN) Adding cpu 1 to runqueue 0
(XEN) CPU 1 booted.
(XEN) Brought up 2 CPUs
(XEN) P2M: 40-bit IPA
(XEN) P2M: 3 levels with order-1 root, VTCR 0x80003558
(XEN) I/O virtualisation disabled
(XEN) alternatives: Patching with alt table 002aa248 -> 002aa2b4
(XEN) CPU0 will execute ICIALLU on guest exit
(XEN) CPU1 will execute ICIALLU on guest exit
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading d0 kernel from boot module @ 0000000082000000
(XEN) Loading ramdisk from boot module @ 0000000084000000
(XEN) Allocating 1:1 mappings totalling 512MB for dom0:
(XEN) BANK[0] 0x000000a0000000-0x000000c0000000 (512MB)
(XEN) Grant table range: 0x00000085000000-0x00000085040000
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading zImage from 0000000082000000 to 00000000a7600000-00000000a7e74200
(XEN) Loading dom0 initrd from 0000000084000000 to 0x00000000a8200000-0x00000000a831e7c0
(XEN) Loading dom0 DTB to 0x00000000a8000000-0x00000000a801f68d
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Scrubbing Free RAM in background
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) ***************************************************
(XEN) PLEASE SPECIFY dom0_mem PARAMETER - USING 512M FOR NOW
(XEN) ***************************************************
(XEN) 3...