Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2011.12-00025-gc6d9d50 (Oct 24 2012 - 04:48:58)
- CPU0: P2041E, Version: 1.1, (0x82180111)
- Core: E500MC, Version: 2.2, (0x80230022)
- Clock Configuration:
- CPU0:1500 MHz, CPU1:1500 MHz, CPU2:1500 MHz, CPU3:1500 MHz,
- CCB:750 MHz,
- DDR:666.667 MHz (1333.333 MT/s data rate) (Asynchronous), LBC:93.750 MHz
- FMAN1: 583.333 MHz
- PME: 375 MHz
- L1: D-cache 32 kB enabled
- I-cache 32 kB enabled
- Board: P2041RDB, CPLD version: 4.1 vBank: 0
- 36-bit Addressing
- Reset Configuration Word (RCW):
- 00000000: 12600000 00000000 241c0000 00000000
- 00000010: 648ea0c1 c3c02000 de800000 40000000
- 00000020: 00000000 00000000 00000000 d0030f07
- 00000030: 00000000 00000000 00000000 00000000
- SERDES Reference Clocks: Bank1=100Mhz Bank2=125Mhz
- I2C: ready
- SPI: ready
- DRAM: Initializing....using SPD
- Detected UDIMM HMT351S6CFR8C-PB
- 2 GiB left unmapped
- 4 GiB (DDR3, 64-bit, CL=9, ECC off)
- DDR Chip-Select Interleaving Mode: CS0+CS1
- Testing 0x00000000 - 0x7fffffff
- Testing 0x80000000 - 0xffffffff
- Remap DDR 2 GiB left unmapped
- POST memory PASSED
- Flash: 128 MiB
- L2: 128 KB enabled
- Corenet Platform Cache: 1024 KB enabled
- SERDES: bank 3 disabled
- SRIO1: disabled
- SRIO2: disabled
- NAND: 512 MiB
- MMC: FSL_SDHC: 0
- EEPROM: Invalid ID (ff ff ff ff)
- PCIe1: disabled
- PCIe2: Root Complex, no link, regs @ 0xfe201000
- PCIe2: Bus 00 - 00
- PCIe3: disabled
- In: serial
- Out: serial
- Err: serial
- Net: Initializing Fman
- Fman1: Uploading microcode version 106.1.4
- FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5
- Hit any key to stop autoboot: 0
- Using FM1@DTSEC1 device
- TFTP from server 10.0.7.1; our IP address is 10.0.7.234
- Filename 'openwrt-mpc85xx-p2041-freescale_p2041rdb-initramfs-kernel.bin'.
- Load address: 0xc0000000
- Loading: #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################################################
- #################################
- done
- Bytes transferred = 6200772 (5e9dc4 hex)
- WARNING: adjusting available memory to 30000000
- Machine check in kernel mode.
- Caused by (from mcsr): mcsr = 0x0000a000
- NIP: 7FF500A0 XER: 20000000 LR: 7FF3CCA8 REGS: 7fe2dc08 TRAP: 0200 DAR: 00000000
- MSR: 00029200 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
- GPR00: 00000001 7FE2DCF8 7FE2DF30 C0000000 00000000 00000010 7FE2DD10 00000004
- GPR08: 7FF819B4 7FE308D8 00000008 00000000 7FF3CC7C 39E4C200 00000000 00000000
- GPR16: 7FF9B378 00000000 7FE30908 7FE308B0 7FFB0BE8 7FF3C658 7FFB0034 7FF819B4
- GPR24: 00000000 7FFBF348 00000000 00000004 7FE308F0 7FF9B378 7FF96614 7FF9B260
- MCSR=0x0000a000 MCSRR0=0x7ff500a0
- MCSRR1=0x00029200 MCAR=0x00000000
- Call backtrace:
- 7FF9B260 7FF3CCA8 7FF3D5CC 7FF4EE1C 7FF4F430 7FF4E680 7FF52394
- 7FF3B21C 7FF31650
- Returning back to 0x7ff500a0
- Machine check in kernel mode.
- Caused by (from mcsr): mcsr = 0x0000a000
- NIP: 7FF500A0 XER: 20000000 LR: 7FF3CCA8 REGS: 7fe2dc08 TRAP: 0200 DAR: 00000000
- MSR: 00029200 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
- GPR00: 00000001 7FE2DCF8 7FE2DF30 C0000000 00000000 00000010 7FE2DD10 00000004
- GPR08: 7FF819B4 7FE308D8 00000008 00000000 7FF3CC7C 39E4C200 00000000 00000000
- GPR16: 7FF9B378 00000000 7FE30908 7FE308B0 7FFB0BE8 7FF3C658 7FFB0034 7FF819B4
- GPR24: 00000000 7FFBF348 00000000 00000004 7FE308F0 7FF9B378 7FF96614 7FF9B260
- MCSR=0x0000a000 MCSRR0=0x7ff500a0
- MCSRR1=0x00029200 MCAR=0x00000000
- Call backtrace:
- 7FF9B260 7FF3CCA8 7FF3D5CC 7FF4EE1C 7FF4F430 7FF4E680 7FF52394
- 7FF3B21C 7FF31650
- Skipping current instr, Returning to 0x7ff500a4
- Machine check in kernel mode.
- Caused by (from mcsr): mcsr = 0x0000a000
- NIP: 7FF72C5C XER: 20000000 LR: 7FF500B4 REGS: 7fe2dc08 TRAP: 0200 DAR: 00000000
- MSR: 00029200 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 00
- GPR00: 00000001 7FE2DCF8 7FE2DF30 C0000000 00000000 00000010 7FE2DD10 00000004
- GPR08: 7FF819B4 27050000 00000008 00000000 7FF3CC7C 39E4C200 00000000 00000000
- GPR16: 7FF9B378 00000000 7FE30908 7FE308B0 7FFB0BE8 7FF3C658 7FFB0034 7FF819B4
- GPR24: 00000000 7FFBF348 00000000 00000004 7FE308F0 7FF9B378 7FF96614 7FF9B260
- MCSR=0x0000a000 MCSRR0=0x7ff72c5c
- MCSRR1=0x00029200 MCAR=0x00000000
- Call backtrace:
- 7FF9B260 7FF3CCA8 7FF3D5CC 7FF4EE1C 7FF4F430 7FF4E680 7FF52394
- 7FF3B21C 7FF31650
- Skipping current instr, Returning to 0x7ff72c60
- Wrong Image Format for bootm command
- ERROR: can't get kernel image!
- => printenv
- baudrate=115200
- bdev=sda3
- bootcmd=run getftp ; bootm c0000000 - e8800000
- bootdelay=3
- bootfile=uImage-p2041rdb.bin
- consoledev=ttyS0
- eth1addr=00-04-9F-02-A3-AE
- eth2addr=00-04-9F-02-A3-AF
- eth3addr=00-04-9F-02-A3-B0
- eth4addr=00-04-9F-02-A3-B1
- eth5addr=00-04-9F-02-A3-B2
- eth6addr=00:E0:0C:00:ea:06
- eth7addr=00:E0:0C:00:ea:07
- eth8addr=00:E0:0C:00:ea:08
- eth9addr=00:E0:0C:00:ea:09
- ethact=FM1@DTSEC1
- ethaddr=00-04-9f-02-a3-ad
- ethprime=e1000#0
- fdtaddr=c00000
- fdtfile=uImage-p2041rdb.dtb
- fileaddr=C0000000
- filesize=5E9DC4
- fman_ucode=0xef000000
- gatewayip=192.168.1.1
- getftp=tftpboot c0000000 openwrt-mpc85xx-p2041-freescale_p2041rdb-initramfs-kernel.bin
- hvboot=setenv bootargs config-addr=0xfe8900000;bootm 0xfe8700000 - 0xfe8800000
- hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1;fsl_fm1_xaui_phy:xfi
- ipaddr=10.0.7.234
- loadaddr=1000000
- netdev=eth0
- netmask=255.255.255.0
- nfsboot=setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr
- ramboot=setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr
- ramdiskaddr=2000000
- ramdiskfile=devel-image-p2041rdb.ext2.gz.u-boot
- rootpath=/opt/nfsroot
- sataboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 console=$consoledev,$baudrate $othbootargs;bootm e8020000 - e8800000
- serverip=10.0.7.1
- stderr=serial
- stdin=serial
- stdout=serial
- tftpflash=tftpboot $loadaddr $uboot && protect off $ubootaddr +$filesize && erase $ubootaddr +$filesize && cp.b $loadaddr $ubootaddr $filesize && protect on $ubootaddr +$filesize && cmp.b $loadaddr $ubootaddr $filesize
- uboot=u-boot.bin
- ubootaddr=0xeff80000
- Environment size: 1939/8188 bytes
- =>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement