Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.9.0-0.bpo.2-amd64] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: WDC WD6001FSYZ-01SS7B1
- Serial Number: WD-WX41DA57H6V3
- LU WWN Device Id: 5 0014ee 2b7b2c40b
- Firmware Version: ER03
- User Capacity: 6,001,175,126,016 bytes [6.00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-3 T13/2161-D revision 5
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 1.5 Gb/s)
- Local Time is: Sun Dec 20 14:05:46 2020 GMT
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 1 (minimum power consumption with standby)
- Rd look-ahead is: Enabled
- Write cache is: Disabled
- DSN feature is: Disabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Wt Cache Reorder: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 573) minutes.
- Conveyance self-test routine
- recommended polling time: ( 6) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 100 051 - 0
- 3 Spin_Up_Time POS--K 234 100 021 - 7283
- 4 Start_Stop_Count -O--CK 100 100 000 - 449
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 100 100 000 - 0
- 9 Power_On_Hours -O--CK 068 068 000 - 24038
- 10 Spin_Retry_Count -O--CK 100 100 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 100 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 140
- 16 Unknown_Attribute -O---K 024 176 000 - 1328599020743
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 200 100 000 - 36
- 193 Load_Cycle_Count -O--CK 200 100 000 - 560
- 194 Temperature_Celsius -O---K 129 097 000 - 23
- 196 Reallocated_Event_Count -O--CK 200 100 000 - 0
- 197 Current_Pending_Sector -O--CK 200 100 000 - 0
- 198 Offline_Uncorrectable ----CK 200 100 000 - 0
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 150
- 200 Multi_Zone_Error_Rate ---R-- 200 100 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 GPL R/O 6 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x0a GPL R/W 8 Device Statistics Notification
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x12 GPL R/O 1 SATA NCQ Non-Data log
- 0x13 GPL R/O 1 SATA NCQ Send and Receive log
- 0x24 GPL R/O 171 Current Device Internal Status Data log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xa0-0xb6 GPL,SL VS 16 Device vendor specific log
- 0xb7 GPL,SL VS 40 Device vendor specific log
- 0xb8-0xbf GPL,SL VS 16 Device vendor specific log
- 0xc0 GPL,SL VS 1 Device vendor specific log
- 0xc8-0xca GPL,SL VS 1 Device vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- Device Error Count: 681 (device log contains only the most recent 24 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 681 [8] occurred at disk power-on lifetime: 24008 hours (1000 days + 8 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 41 00 08 00 00 00 00 00 08 40 00 Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- Error 680 [7] occurred at disk power-on lifetime: 24008 hours (1000 days + 8 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 41 00 08 00 00 00 00 00 08 40 00 Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- Error 679 [6] occurred at disk power-on lifetime: 24008 hours (1000 days + 8 hours)
- When the command that caused the error occurred, the device was in an unknown state.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 01 01 00 00 00 00 00 a0 00 Error: ABRT
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- Error 678 [5] occurred at disk power-on lifetime: 24008 hours (1000 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 41 00 08 00 02 ba a0 f4 00 40 00 Error: ICRC, ABRT at LBA = 0x2baa0f400 = 11721044992
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 10 00 02 ba a0 f4 00 40 00 6d+23:22:46.953 READ FPDMA QUEUED
- ec 00 00 00 01 00 00 00 00 00 00 00 08 6d+23:22:46.948 IDENTIFY DEVICE
- 60 00 08 00 d0 00 00 00 00 00 18 40 08 6d+23:22:46.948 READ FPDMA QUEUED
- 60 00 08 00 c8 00 00 00 00 00 08 40 08 6d+23:22:46.948 READ FPDMA QUEUED
- 60 00 08 00 c0 00 00 00 00 00 00 40 00 6d+23:22:46.942 READ FPDMA QUEUED
- Error 677 [4] occurred at disk power-on lifetime: 24008 hours (1000 days + 8 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 00 00 00 00 00 00 01 00 00
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- ec 00 00 00 00 00 00 00 00 00 00 00 00 6d+23:22:22.782 IDENTIFY DEVICE
- Error 676 [3] occurred at disk power-on lifetime: 23991 hours (999 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 41 00 50 00 02 ba a0 f1 60 40 00 Error: ICRC, ABRT at LBA = 0x2baa0f160 = 11721044320
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 50 00 b8 00 02 ba a0 f1 60 40 00 6d+05:34:28.316 READ FPDMA QUEUED
- 60 00 30 00 b0 00 02 ba a0 f1 28 40 00 6d+05:34:28.316 READ FPDMA QUEUED
- 60 00 a8 00 a8 00 02 ba a0 f0 78 40 00 6d+05:34:28.314 READ FPDMA QUEUED
- 47 00 00 00 01 00 00 00 00 00 13 a0 08 6d+05:34:28.310 READ LOG DMA EXT
- 47 00 00 00 01 00 00 00 00 00 00 a0 08 6d+05:34:28.298 READ LOG DMA EXT
- Error 675 [2] occurred at disk power-on lifetime: 23991 hours (999 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 41 00 a8 00 02 ba a0 f0 78 40 00 Error: ICRC, ABRT at LBA = 0x2baa0f078 = 11721044088
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 a8 00 e0 00 02 ba a0 f0 78 40 00 6d+05:34:25.910 READ FPDMA QUEUED
- 60 00 30 00 d8 00 02 ba a0 f1 28 40 00 6d+05:34:25.910 READ FPDMA QUEUED
- 60 00 50 00 d0 00 02 ba a0 f1 60 40 00 6d+05:34:25.910 READ FPDMA QUEUED
- 60 00 48 00 c8 00 02 ba a0 f1 b8 40 00 6d+05:34:25.908 READ FPDMA QUEUED
- 47 00 00 00 01 00 00 00 00 00 13 a0 08 6d+05:34:25.904 READ LOG DMA EXT
- Error 674 [1] occurred at disk power-on lifetime: 23991 hours (999 days + 15 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 41 00 08 00 02 ba a0 f0 28 40 00 Error: ICRC, ABRT at LBA = 0x2baa0f028 = 11721044008
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 40 00 02 ba a0 f0 28 40 00 6d+05:34:23.515 READ FPDMA QUEUED
- 60 00 20 00 38 00 02 ba a0 f0 00 40 00 6d+05:34:23.515 READ FPDMA QUEUED
- 60 00 08 00 30 00 00 00 04 10 00 40 08 6d+05:34:23.515 READ FPDMA QUEUED
- 60 00 08 00 28 00 00 00 04 08 00 40 08 6d+05:34:23.515 READ FPDMA QUEUED
- 60 00 08 00 f8 00 00 00 04 04 00 40 08 6d+05:34:23.515 READ FPDMA QUEUED
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 23 Celsius
- Power Cycle Min/Max Temperature: 23/46 Celsius
- Lifetime Min/Max Temperature: 13/56 Celsius
- Under/Over Temperature Limit Count: 0/0
- Vendor specific:
- 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (363)
- Index Estimated Time Temperature Celsius
- 364 2020-12-20 06:08 24 *****
- ... ..(200 skipped). .. *****
- 87 2020-12-20 09:29 24 *****
- 88 2020-12-20 09:30 25 ******
- 89 2020-12-20 09:31 25 ******
- 90 2020-12-20 09:32 26 *******
- 91 2020-12-20 09:33 26 *******
- 92 2020-12-20 09:34 27 ********
- ... ..( 18 skipped). .. ********
- 111 2020-12-20 09:53 27 ********
- 112 2020-12-20 09:54 26 *******
- ... ..( 11 skipped). .. *******
- 124 2020-12-20 10:06 26 *******
- 125 2020-12-20 10:07 25 ******
- ... ..( 22 skipped). .. ******
- 148 2020-12-20 10:30 25 ******
- 149 2020-12-20 10:31 24 *****
- ... ..(109 skipped). .. *****
- 259 2020-12-20 12:21 24 *****
- 260 2020-12-20 12:22 23 ****
- ... ..(102 skipped). .. ****
- 363 2020-12-20 14:05 23 ****
- SCT Error Recovery Control:
- Read: 70 (7.0 seconds)
- Write: 70 (7.0 seconds)
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 140 -D- Lifetime Power-On Resets
- 0x01 0x010 4 24038 -D- Power-on Hours
- 0x01 0x018 6 129516957392 -D- Logical Sectors Written
- 0x01 0x020 6 1170862256 -D- Number of Write Commands
- 0x01 0x028 6 1199082063351 -D- Logical Sectors Read
- 0x01 0x030 6 2667370498 -D- Number of Read Commands
- 0x01 0x038 6 637454080 -D- Date and Time TimeStamp
- 0x01 0x048 2 2473 ND- Workload Utilization
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 18289 -D- Spindle Motor Power-on Hours
- 0x03 0x010 4 17910 -D- Head Flying Hours
- 0x03 0x018 4 597 -D- Head Load Events
- 0x03 0x020 4 200 ND- Number of Reallocated Logical Sectors
- 0x03 0x028 4 0 -D- Read Recovery Attempts
- 0x03 0x030 4 0 -D- Number of Mechanical Start Failures
- 0x03 0x038 4 0 -D- Number of Realloc. Candidate Logical Sectors
- 0x03 0x040 4 36 -D- Number of High Priority Unload Events
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 -D- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 95 -D- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 23 -D- Current Temperature
- 0x05 0x010 1 26 -D- Average Short Term Temperature
- 0x05 0x018 1 30 -D- Average Long Term Temperature
- 0x05 0x020 1 56 -D- Highest Temperature
- 0x05 0x028 1 17 -D- Lowest Temperature
- 0x05 0x030 1 49 -D- Highest Average Short Term Temperature
- 0x05 0x038 1 20 -D- Lowest Average Short Term Temperature
- 0x05 0x040 1 42 -D- Highest Average Long Term Temperature
- 0x05 0x048 1 22 -D- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 -D- Time in Over-Temperature
- 0x05 0x058 1 60 -D- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 -D- Time in Under-Temperature
- 0x05 0x068 1 0 -D- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 4390 -D- Number of Hardware Resets
- 0x06 0x010 4 103 -D- Number of ASR Events
- 0x06 0x018 4 681 -D- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 41 Command failed due to ICRC error
- 0x0002 2 41 R_ERR response for data FIS
- 0x0003 2 41 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 1 R_ERR response for non-data FIS
- 0x0006 2 1 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 1 Device-to-host non-data FIS retries
- 0x0009 2 10 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 220 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x8000 4 0 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement