API tools faq
paste
Advertisement
benoitm974

5.11-rc3 H96MAX X3 bootlog

benoitm974
Jan 11th, 2021
581
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.86 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd050]
  2. [ 0.000000] Linux version 5.11.0-rc3 (chewitt@toolbox) (aarch64-none-linux-gnu-gcc.real (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1 SMP PREEMPT Mon Jan 11 15:02:09 UTC 2021
  3. [ 0.000000] Machine model: Shenzhen Amediatech Technology Co., Ltd X96 Air
  4. [ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
  5. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000a0000000, size 896 MiB
  6. [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  7. [ 0.000000] Zone ranges:
  8. [ 0.000000] DMA [mem 0x0000000000000000-0x00000000d7ffffff]
  9. [ 0.000000] DMA32 empty
  10. [ 0.000000] Normal empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
  14. [ 0.000000] node 0: [mem 0x0000000005300000-0x00000000d7ffffff]
  15. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000000d7ffffff]
  16. [ 0.000000] On node 0 totalpages: 883968
  17. [ 0.000000] DMA zone: 13824 pages used for memmap
  18. [ 0.000000] DMA zone: 0 pages reserved
  19. [ 0.000000] DMA zone: 883968 pages, LIFO batch:63
  20. [ 0.000000] psci: probing for conduit method from DT.
  21. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  22. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  23. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  24. [ 0.000000] psci: SMC Calling Convention v1.1
  25. [ 0.000000] percpu: Embedded 23 pages/cpu s54992 r8192 d31024 u94208
  26. [ 0.000000] pcpu-alloc: s54992 r8192 d31024 u94208 alloc=23*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  28. [ 0.000000] Detected VIPT I-cache on CPU0
  29. [ 0.000000] CPU features: detected: Virtualization Host Extensions
  30. [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
  31. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  32. [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  33. [ 0.000000] alternatives: patching kernel code
  34. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 870144
  35. [ 0.000000] Kernel command line: boot=UUID=1101-0243 disk=UUID=69cd8151-31e7-450e-9fd0-5121952c7ec5 quiet systemd.debug_shell=ttyAML0 console=ttyAML0,115200n8 console=tty0
  36. [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  37. [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  38. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  39. [ 0.000000] Memory: 2511068K/3535872K available (11008K kernel code, 1832K rwdata, 4280K rodata, 6208K init, 4444K bss, 107300K reserved, 917504K cma-reserved)
  40. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  42. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  43. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  44. [ 0.000000] Tracing variant of Tasks RCU enabled.
  45. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  46. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  47. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  48. [ 0.000000] GIC: Using split EOI/Deactivate mode
  49. [ 0.000000] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  50. [ 0.000000] random: get_random_bytes called from start_kernel+0x5ec/0x7a4 with crng_init=0
  51. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  52. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  53. [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  54. [ 0.000205] Console: colour dummy device 80x25
  55. [ 0.000253] printk: console [tty0] enabled
  56. [ 0.000264] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  57. [ 0.000270] ... MAX_LOCKDEP_SUBCLASSES: 8
  58. [ 0.000277] ... MAX_LOCK_DEPTH: 48
  59. [ 0.000284] ... MAX_LOCKDEP_KEYS: 8192
  60. [ 0.000293] ... CLASSHASH_SIZE: 4096
  61. [ 0.000299] ... MAX_LOCKDEP_ENTRIES: 32768
  62. [ 0.000307] ... MAX_LOCKDEP_CHAINS: 65536
  63. [ 0.000313] ... CHAINHASH_SIZE: 32768
  64. [ 0.000319] memory used by lock dependency info: 3637 kB
  65. [ 0.000326] per task-struct memory footprint: 1920 bytes
  66. [ 0.000377] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  67. [ 0.000398] pid_max: default: 32768 minimum: 301
  68. [ 0.000635] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  69. [ 0.000663] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  70. [ 0.004371] rcu: Hierarchical SRCU implementation.
  71. [ 0.005659] smp: Bringing up secondary CPUs ...
  72. [ 0.007127] Detected VIPT I-cache on CPU1
  73. [ 0.007210] CPU1: Booted secondary processor 0x0000000100 [0x411fd050]
  74. [ 0.009076] Detected VIPT I-cache on CPU2
  75. [ 0.009147] CPU2: Booted secondary processor 0x0000000200 [0x411fd050]
  76. [ 0.010749] Detected VIPT I-cache on CPU3
  77. [ 0.010810] CPU3: Booted secondary processor 0x0000000300 [0x411fd050]
  78. [ 0.011093] smp: Brought up 1 node, 4 CPUs
  79. [ 0.011113] SMP: Total of 4 processors activated.
  80. [ 0.011122] CPU features: detected: Privileged Access Never
  81. [ 0.011132] CPU features: detected: LSE atomic instructions
  82. [ 0.011139] CPU features: detected: 32-bit EL0 Support
  83. [ 0.011146] CPU features: detected: Common not Private translations
  84. [ 0.011154] CPU features: detected: RAS Extension Support
  85. [ 0.011162] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  86. [ 0.011171] CPU features: detected: CRC32 instructions
  87. [ 0.011180] CPU features: detected: RCpc load-acquire (LDAPR)
  88. [ 0.049604] CPU: All CPU(s) started at EL2
  89. [ 0.051505] devtmpfs: initialized
  90. [ 0.081104] KASLR disabled due to lack of seed
  91. [ 0.081560] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  92. [ 0.081589] futex hash table entries: 1024 (order: 5, 131072 bytes, linear)
  93. [ 0.101373] pinctrl core: initialized pinctrl subsystem
  94. [ 0.103681] NET: Registered protocol family 16
  95. [ 0.107051] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
  96. [ 0.107310] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  97. [ 0.107740] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  98. [ 0.109051] thermal_sys: Registered thermal governor 'step_wise'
  99. [ 0.110065] cpuidle: using governor menu
  100. [ 0.110286] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  101. [ 0.110511] ASID allocator initialised with 32768 entries
  102. [ 0.186739] cryptd: max_cpu_qlen set to 1000
  103. [ 0.194227] AO_5V: supplied by DC_IN
  104. [ 0.195127] VDDAO_3V3: supplied by DC_IN
  105. [ 0.195933] EMMC_1V8: supplied by VDDAO_3V3
  106. [ 0.196107] VDDIO_AO1V8: supplied by VDDAO_3V3
  107. [ 0.196909] iommu: Default domain type: Translated
  108. [ 0.197689] SCSI subsystem initialized
  109. [ 0.198077] libata version 3.00 loaded.
  110. [ 0.198586] usbcore: registered new interface driver usbfs
  111. [ 0.198712] usbcore: registered new interface driver hub
  112. [ 0.198803] usbcore: registered new device driver usb
  113. [ 0.199757] mc: Linux media interface: v0.10
  114. [ 0.199825] videodev: Linux video capture interface: v2.00
  115. [ 0.200100] pps_core: LinuxPPS API ver. 1 registered
  116. [ 0.200110] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  117. [ 0.201043] Advanced Linux Sound Architecture Driver Initialized.
  118. [ 0.202925] clocksource: Switched to clocksource arch_sys_counter
  119. [ 0.203614] FS-Cache: Loaded
  120. [ 0.220535] NET: Registered protocol family 2
  121. [ 0.221848] tcp_listen_portaddr_hash hash table entries: 2048 (order: 5, 163840 bytes, linear)
  122. [ 0.222248] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  123. [ 0.222696] TCP bind hash table entries: 32768 (order: 9, 2359296 bytes, linear)
  124. [ 0.226231] TCP: Hash tables configured (established 32768 bind 32768)
  125. [ 0.226650] UDP hash table entries: 2048 (order: 6, 327680 bytes, linear)
  126. [ 0.227238] UDP-Lite hash table entries: 2048 (order: 6, 327680 bytes, linear)
  127. [ 0.228050] NET: Registered protocol family 1
  128. [ 0.229226] RPC: Registered named UNIX socket transport module.
  129. [ 0.229242] RPC: Registered udp transport module.
  130. [ 0.229252] RPC: Registered tcp transport module.
  131. [ 0.229262] RPC: Registered tcp NFSv4.1 backchannel transport module.
  132. [ 0.263533] Initialise system trusted keyrings
  133. [ 0.263951] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  134. [ 0.284013] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  135. [ 0.284533] FS-Cache: Netfs 'nfs' registered for caching
  136. [ 0.285739] NFS: Registering the id_resolver key type
  137. [ 0.285800] Key type id_resolver registered
  138. [ 0.285812] Key type id_legacy registered
  139. [ 0.286057] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  140. [ 0.287062] FS-Cache: Netfs 'cifs' registered for caching
  141. [ 0.287762] Key type cifs.idmap registered
  142. [ 0.325008] NET: Registered protocol family 38
  143. [ 0.325063] Key type asymmetric registered
  144. [ 0.325095] Asymmetric key parser 'x509' registered
  145. [ 0.325163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  146. [ 0.325498] io scheduler mq-deadline registered
  147. [ 0.325513] io scheduler kyber registered
  148. [ 0.355386] soc soc0: Amlogic Meson SM1 (S905X3) Revision 2b:c (10:2) Detected
  149. [ 0.358044] VDDCPU: supplied by regulator-dummy
  150. [ 0.361052] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 22, base_baud = 1500000) is a meson_uart
  151. [ 0.361303] printk: console [ttyAML0] enabled
  152. [ 0.363229] ffd24000.serial: ttyAML6 at MMIO 0xffd24000 (irq = 28, base_baud = 1500000) is a meson_uart
  153. [ 0.363582] serial serial0: tty port ttyAML6 registered
  154. [ 0.389080] brd: module loaded
  155. [ 0.389404] loop: module loaded
  156. [ 0.485328] Loading iSCSI transport class v2.0-870.
  157. [ 0.486734] iscsi: registered transport (tcp)
  158. [ 0.488732] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  159. [ 0.488748] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  160. [ 0.490168] libphy: Fixed MDIO Bus: probed
  161. [ 0.492755] tun: Universal TUN/TAP device driver, 1.6
  162. [ 0.495488] usbcore: registered new interface driver rtl8150
  163. [ 0.495600] usbcore: registered new interface driver r8152
  164. [ 0.497049] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  165. [ 0.497063] ehci-platform: EHCI generic platform driver
  166. [ 0.497326] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  167. [ 0.497376] ohci-platform: OHCI generic platform driver
  168. [ 0.498429] usbcore: registered new interface driver uas
  169. [ 0.498542] usbcore: registered new interface driver usb-storage
  170. [ 0.499160] mousedev: PS/2 mouse device common for all mice
  171. [ 0.499954] i2c /dev entries driver
  172. [ 0.501904] debugfs: Directory 'ff800280.cec' with parent 'regmap' already present!
  173. [ 0.526448] meson-gx-mmc ffe05000.sd: Got CD GPIO
  174. [ 0.526457] meson-gx-mmc ffe03000.sd: allocated mmc-pwrseq
  175. [ 0.527870] ledtrig-cpu: registered to indicate activity on CPUs
  176. [ 0.528403] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  177. [ 0.528752] meson-sm: secure-monitor enabled
  178. [ 0.529702] hid: raw HID events driver (C) Jiri Kosina
  179. [ 0.534718] usbcore: registered new interface driver usbhid
  180. [ 0.534739] usbhid: USB HID core driver
  181. [ 0.554223] NET: Registered protocol family 10
  182. [ 0.559368] Segment Routing with IPv6
  183. [ 0.559453] NET: Registered protocol family 17
  184. [ 0.559842] Key type dns_resolver registered
  185. [ 0.560430] Loading compiled-in X.509 certificates
  186. [ 0.585955] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
  187. [ 0.589834] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
  188. [ 0.591988] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
  189. [ 0.670876] random: fast init done
  190. [ 0.674734] mmc0: new high speed SDIO card at address 0001
  191. [ 0.697016] mmc2: new HS200 MMC card at address 0001
  192. [ 0.698148] mmcblk2: mmc2:0001 CWBD3R 58.2 GiB
  193. [ 0.698512] mmcblk2boot0: mmc2:0001 CWBD3R partition 1 4.00 MiB
  194. [ 0.698888] mmcblk2boot1: mmc2:0001 CWBD3R partition 2 4.00 MiB
  195. [ 0.699374] mmcblk2rpmb: mmc2:0001 CWBD3R partition 3 4.00 MiB, chardev (242:0)
  196. [ 0.701542] mmcblk2: p1 p2
  197. [ 0.713706] meson-drm ff900000.vpu: Queued 2 outputs on vpu
  198. [ 0.714900] meson-drm ff900000.vpu: CVBS Output connector not available
  199. [ 0.753016] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  200. [ 0.754673] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  201. [ 0.756502] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops)
  202. [ 0.757510] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  203. [ 0.926033] Console: switching to colour frame buffer device 128x48
  204. [ 0.948048] meson-drm ff900000.vpu: [drm] fb0: mesondrmfb frame buffer device
  205. [ 0.951697] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
  206. [ 0.951718] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
  207. [ 0.951862] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
  208. [ 0.951917] meson8b-dwmac ff3f0000.ethernet: The only allowed RGMII RX delays values are: 0ps, 2000ps
  209. [ 0.955762] meson8b-dwmac: probe of ff3f0000.ethernet failed with error -22
  210. [ 0.956192] stmmaceth ff3f0000.ethernet: IRQ eth_wake_irq not found
  211. [ 0.956205] stmmaceth ff3f0000.ethernet: IRQ eth_lpi not found
  212. [ 0.956314] stmmaceth ff3f0000.ethernet: PTP uses main clock
  213. [ 0.956651] stmmaceth ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  214. [ 0.956666] stmmaceth ff3f0000.ethernet: DWMAC1000
  215. [ 0.956676] stmmaceth ff3f0000.ethernet: DMA HW capability register supported
  216. [ 0.956684] stmmaceth ff3f0000.ethernet: RX Checksum Offload Engine supported
  217. [ 0.956691] stmmaceth ff3f0000.ethernet: COE Type 2
  218. [ 0.956698] stmmaceth ff3f0000.ethernet: TX Checksum insertion supported
  219. [ 0.956703] stmmaceth ff3f0000.ethernet: Wake-Up On Lan supported
  220. [ 0.956809] stmmaceth ff3f0000.ethernet: Normal descriptors
  221. [ 0.956818] stmmaceth ff3f0000.ethernet: Ring mode enabled
  222. [ 0.956825] stmmaceth ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  223. [ 0.957751] libphy: stmmac: probed
  224. [ 0.960541] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
  225. [ 0.960555] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
  226. [ 0.964487] dwc2 ff400000.usb: supply vusb_d not found, using dummy regulator
  227. [ 0.964708] dwc2 ff400000.usb: supply vusb_a not found, using dummy regulator
  228. [ 0.965204] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  229. [ 0.967459] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  230. [ 0.967596] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 1
  231. [ 0.967828] xhci-hcd xhci-hcd.3.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
  232. [ 0.967907] xhci-hcd xhci-hcd.3.auto: irq 37, io mem 0xff500000
  233. [ 0.968699] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
  234. [ 0.968710] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  235. [ 0.968720] usb usb1: Product: xHCI Host Controller
  236. [ 0.968727] usb usb1: Manufacturer: Linux 5.11.0-rc3 xhci-hcd
  237. [ 0.968733] usb usb1: SerialNumber: xhci-hcd.3.auto
  238. [ 0.969712] hub 1-0:1.0: USB hub found
  239. [ 0.969796] hub 1-0:1.0: 2 ports detected
  240. [ 0.970501] xhci-hcd xhci-hcd.3.auto: xHCI Host Controller
  241. [ 0.970527] xhci-hcd xhci-hcd.3.auto: new USB bus registered, assigned bus number 2
  242. [ 0.970548] xhci-hcd xhci-hcd.3.auto: Host supports USB 3.0 SuperSpeed
  243. [ 0.970654] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  244. [ 0.970840] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
  245. [ 0.970851] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  246. [ 0.970860] usb usb2: Product: xHCI Host Controller
  247. [ 0.970867] usb usb2: Manufacturer: Linux 5.11.0-rc3 xhci-hcd
  248. [ 0.970874] usb usb2: SerialNumber: xhci-hcd.3.auto
  249. [ 0.971704] hub 2-0:1.0: USB hub found
  250. [ 0.971761] hub 2-0:1.0: 1 port detected
  251. [ 0.980544] libphy: mdio_mux: probed
  252. [ 1.186541] libphy: mdio_mux: probed
  253. [ 1.199318] printk: console [netcon0] enabled
  254. [ 1.199334] netconsole: network logging started
  255. [ 1.200314] ALSA device list:
  256. [ 1.200323] #0: X96-AIR
  257. [ 1.203132] Freeing unused kernel memory: 6208K
  258. [ 1.223337] Run /init as init process
  259. [ 1.223385] with arguments:
  260. [ 1.223414] /init
  261. [ 1.223444] with environment:
  262. [ 1.223473] HOME=/
  263. [ 1.223502] TERM=linux
  264. [ 1.223530] boot=UUID=1101-0243
  265. [ 1.223559] disk=UUID=69cd8151-31e7-450e-9fd0-5121952c7ec5
  266. [ 1.315000] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  267. [ 1.355620] Checking disk(s): UUID=1101-0243 UUID=69cd8151-31e7-450e-9fd0-5121952c7ec5
  268. [ 1.472163] usb 1-1: New USB device found, idVendor=0781, idProduct=5583, bcdDevice= 1.00
  269. [ 1.472189] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  270. [ 1.472196] usb 1-1: Product: Ultra Fit
  271. [ 1.472203] usb 1-1: Manufacturer: SanDisk
  272. [ 1.472209] usb 1-1: SerialNumber: 4C530001030304122382
  273. [ 1.473644] usb-storage 1-1:1.0: USB Mass Storage device detected
  274. [ 1.475918] scsi host0: usb-storage 1-1:1.0
  275. [ 2.511922] scsi 0:0:0:0: Direct-Access SanDisk Ultra Fit 1.00 PQ: 0 ANSI: 6
  276. [ 2.513297] sd 0:0:0:0: [sda] 242614272 512-byte logical blocks: (124 GB/116 GiB)
  277. [ 2.514937] sd 0:0:0:0: [sda] Write Protect is off
  278. [ 2.514949] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
  279. [ 2.515416] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  280. [ 2.545847] sda: sda1 sda2
  281. [ 2.557103] sd 0:0:0:0: [sda] Attached SCSI removable disk
  282. [ 3.531990] fsck: CP437: Invalid argument
  283. [ 3.532160] fsck: fsck.fat 4.1 (2017-01-24)
  284. [ 3.532347] fsck: /dev/sda1: 164 files, 14506/65501 clusters
  285. [ 3.532561] fsck: STORAGE: clean, 11/30195712 files, 3825600/120778752 blocks
  286. [ 3.799891] loop0: detected capacity change from 202816 to 0
  287. [ 4.361002] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
  288. [ 4.461840] ### BIG FAT WARNING
  289. [ 4.461945] ### sda2 is removable. suspend/resume may not work
  290. [ 4.476386] ### BIG FAT WARNING
  291. [ 4.476505] ### sda1 is removable. suspend/resume may not work
  292. [ 5.508701] systemd[1]: System time before build time, advancing clock.
  293. [ 5.624247] systemd[1]: systemd 247 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -ZSTD -SECCOMP +BLKID -ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
  294. [ 5.625264] systemd[1]: Detected architecture arm64.
  295. [ 5.625884] systemd[1]: Detected first boot.
  296. [ 5.667323] systemd[1]: Set hostname to <LibreELEC>.
  297. [ 5.667555] systemd[1]: Cannot open /etc/machine-id: No such file or directory
  298. [ 6.503657] systemd[1]: Populated /etc with preset unit settings.
  299. [ 6.666135] systemd[1]: Queued start job for default target Kodi Mediacenter Interface.
  300. [ 6.667535] random: systemd: uninitialized urandom read (16 bytes read)
  301. [ 6.728573] systemd[1]: Created slice system-modprobe.slice.
  302. [ 6.728928] random: systemd: uninitialized urandom read (16 bytes read)
  303. [ 6.731361] systemd[1]: Created slice User and Session Slice.
  304. [ 6.731544] random: systemd: uninitialized urandom read (16 bytes read)
  305. [ 6.731946] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  306. [ 6.732352] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  307. [ 6.732696] systemd[1]: Reached target Paths.
  308. [ 6.732854] systemd[1]: Reached target Slices.
  309. [ 6.762315] systemd[1]: Listening on RPCbind Server Activation Socket.
  310. [ 6.762622] systemd[1]: Reached target RPC Port Mapper.
  311. [ 6.763253] systemd[1]: Listening on initctl Compatibility Named Pipe.
  312. [ 6.768338] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  313. [ 6.770436] systemd[1]: Listening on Journal Socket (/dev/log).
  314. [ 6.771704] systemd[1]: Listening on Journal Socket.
  315. [ 6.776658] systemd[1]: Listening on udev Control Socket.
  316. [ 6.777882] systemd[1]: Listening on udev Kernel Socket.
  317. [ 6.778819] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  318. [ 6.787300] systemd[1]: Mounting POSIX Message Queue File System...
  319. [ 6.793169] systemd[1]: Mounting Kernel Debug File System...
  320. [ 6.793725] systemd[1]: Condition check resulted in Kernel Trace File System being skipped.
  321. [ 6.800249] systemd[1]: Mounting Variable Directory...
  322. [ 6.806797] systemd[1]: Started Early root shell on /dev/ttyAML0 FOR DEBUGGING ONLY.
  323. [ 6.813088] systemd[1]: Starting Create kernel modules tree from overlays...
  324. [ 6.819836] systemd[1]: Starting Show Version...
  325. [ 6.826665] systemd[1]: Starting Create Persistent Log Directory on /storage...
  326. [ 6.832971] systemd[1]: Starting Setup NTP servers for timesyncd...
  327. [ 6.839560] systemd[1]: Starting Wait for Kernel Time Synchronisation...
  328. [ 6.851955] systemd[1]: Mounted POSIX Message Queue File System.
  329. [ 6.852639] systemd[1]: Mounted Kernel Debug File System.
  330. [ 6.853204] systemd[1]: Mounted Variable Directory.
  331. [ 6.884678] systemd[1]: Finished Create Persistent Log Directory on /storage.
  332. [ 6.890620] systemd[1]: Finished Show Version.
  333. [ 6.895662] systemd[1]: Finished Setup NTP servers for timesyncd.
  334. [ 6.896696] systemd[1]: Condition check resulted in Persistent Log Storage being skipped.
  335. [ 6.912140] kernel-overlays-setup: setup base modules
  336. [ 7.067666] kernel-overlays-setup: added modules from /usr/lib/kernel-overlays/base/lib/modules/5.11.0-rc3
  337. [ 7.156134] kernel-overlays-setup: added firmware from /usr/lib/kernel-overlays/base/lib/firmware
  338. [ 7.156356] kernel-overlays-setup: adding overlays from /storage/.cache/kernel-overlays
  339. [ 7.156690] kernel-overlays-setup: done
  340. [ 7.163231] systemd[1]: Finished Create kernel modules tree from overlays.
  341. [ 7.172948] systemd[1]: Starting Create list of static device nodes for the current kernel...
  342. [ 7.179529] systemd[1]: Starting Setup machine-id...
  343. [ 7.185462] systemd[1]: Starting Load Kernel Module configfs...
  344. [ 7.192100] systemd[1]: Starting Load Kernel Module drm...
  345. [ 7.198830] systemd[1]: Starting Load Kernel Module fuse...
  346. [ 7.204537] systemd[1]: Starting Mounting swapfile...
  347. [ 7.230302] systemd[1]: Condition check resulted in Load Kernel Modules being skipped.
  348. [ 7.237248] systemd[1]: Starting Apply Kernel Variables...
  349. [ 7.244586] systemd[1]: Starting Coldplug All udev Devices...
  350. [ 7.252670] systemd[1]: Finished Create list of static device nodes for the current kernel.
  351. [ 7.254475] systemd[1]: modprobe@configfs.service: Succeeded.
  352. [ 7.259018] systemd[1]: Finished Load Kernel Module configfs.
  353. [ 7.260949] systemd[1]: modprobe@drm.service: Succeeded.
  354. [ 7.265628] systemd[1]: Finished Load Kernel Module drm.
  355. [ 7.272408] systemd[1]: Mounting Kernel Configuration File System...
  356. [ 7.275961] fuse: init (API version 7.33)
  357. [ 7.280949] systemd[1]: modprobe@fuse.service: Succeeded.
  358. [ 7.285765] systemd[1]: Finished Load Kernel Module fuse.
  359. [ 7.294359] systemd[1]: Mounting FUSE Control File System...
  360. [ 7.314424] systemd[1]: Mounted Kernel Configuration File System.
  361. [ 7.315625] systemd[1]: Mounted FUSE Control File System.
  362. [ 7.373979] systemd[1]: Finished Mounting swapfile.
  363. [ 7.374571] systemd[1]: Reached target Swap.
  364. [ 7.401710] systemd[1]: Mounting Temporary Directory (/tmp)...
  365. [ 7.407931] systemd[1]: Finished Apply Kernel Variables.
  366. [ 7.413817] systemd[1]: Mounted Temporary Directory (/tmp).
  367. [ 7.414460] systemd[1]: Reached target Local File Systems.
  368. [ 7.422782] systemd[1]: Finished Setup machine-id.
  369. [ 7.432486] systemd[1]: Starting Journal Service...
  370. [ 7.439545] systemd[1]: Starting Create Static Device Nodes in /dev...
  371. [ 7.449864] random: crng init done
  372. [ 7.449887] random: 7 urandom warning(s) missed due to ratelimiting
  373. [ 7.496349] systemd[1]: Finished Create Static Device Nodes in /dev.
  374. [ 7.559379] systemd[1]: Started Journal Service.
  375. [ 9.597943] meson-vrtc ff8000a8.rtc: registered as rtc0
  376. [ 9.598015] meson-vrtc ff8000a8.rtc: setting system clock to 1970-01-01T00:00:09 UTC (9)
  377. [ 9.650982] Registered IR keymap rc-x96max
  378. [ 9.678418] panfrost ffe40000.gpu: clock rate = 24000000
  379. [ 9.678598] panfrost ffe40000.gpu: dev_pm_opp_set_regulators: no regulator (mali) found: -19
  380. [ 9.683765] IR NEC protocol handler initialized
  381. [ 9.691041] panfrost ffe40000.gpu: mali-g31 id 0x7093 major 0x0 minor 0x0 status 0x0
  382. [ 9.691068] panfrost ffe40000.gpu: features: 00000000,3fde77ff, issues: 00000000,00000400
  383. [ 9.691077] panfrost ffe40000.gpu: Features: L2:0x07100206 Shader:0x00000000 Tiler:0x00000209 Mem:0x1 MMU:0x00002821 AS:0xff JS:0x7
  384. [ 9.691086] panfrost ffe40000.gpu: shader_present=0x1 l2_present=0x1
  385. [ 9.704002] [drm] Initialized panfrost 1.1.0 20180908 for ffe40000.gpu on minor 1
  386. [ 9.711865] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
  387. [ 9.712421] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
  388. [ 9.712663] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input0
  389. [ 9.719520] meson-ir ff808000.ir: receiver initialized
  390. [ 10.020910] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  391. [ 10.056855] Bluetooth: Core ver 2.22
  392. [ 10.057073] NET: Registered protocol family 31
  393. [ 10.057089] Bluetooth: HCI device and connection manager initialized
  394. [ 10.057529] Bluetooth: HCI socket layer initialized
  395. [ 10.057559] Bluetooth: L2CAP socket layer initialized
  396. [ 10.057783] Bluetooth: SCO socket layer initialized
  397. [ 10.059098] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  398. [ 10.225619] Bluetooth: HCI UART driver ver 2.3
  399. [ 10.225646] Bluetooth: HCI UART protocol H4 registered
  400. [ 10.225794] Bluetooth: HCI UART protocol Three-wire (H5) registered
  401. [ 10.226132] Bluetooth: HCI UART protocol Broadcom registered
  402. [ 10.226207] Bluetooth: HCI UART protocol QCA registered
  403. [ 10.275208] stmmaceth ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet] (irq=38)
  404. [ 10.291048] stmmaceth ff3f0000.ethernet eth0: No Safety Features support found
  405. [ 10.291079] stmmaceth ff3f0000.ethernet eth0: PTP not supported by HW
  406. [ 10.293394] stmmaceth ff3f0000.ethernet eth0: configuring for phy/rgmii-txid link mode
  407. [ 10.572376] input: eventlircd as /devices/virtual/input/input1
  408. [ 10.700396] EXT4-fs (mmcblk2p2): recovery complete
  409. [ 10.701543] EXT4-fs (mmcblk2p2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: disabled.
  410. [ 12.255381] brcmfmac: F1 signature read @0x18000000=0x16024335
  411. [ 12.260137] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2
  412. [ 12.297629] brcmfmac mmc0:0001:1: Direct firmware load for brcm/brcmfmac4339-sdio.amediatech,x96-air-4g.txt failed with error -2
  413. [ 12.555302] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4339-sdio for chip BCM4339/2
  414. [ 12.555516] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
  415. [ 12.559675] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4339/2 wl0: Aug 28 2014 18:39:28 version 6.37.32.RC23.34.28 (r499539)
  416. [ 19.427238] rc rc0: two consecutive events of type pulse
  417. [ 75.428843] hrtimer: interrupt took 2062167 ns
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!