API tools faq
paste
Advertisement
Gazzeh

E61 Wheels! TOYO PRAXES BS r888 something

Gazzeh
Nov 16th, 2015
71
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.66 KB | None | 0 0
raw download clone embed print report
  1. 2015-11-16 19:52:00 ★ Richard Hawkins would walk over to the toolstation as he then bends down and picks up a Toolbox-
  2. 2015-11-16 19:52:16 ★ with his right hand. ((Richard Hawkins))
  3. 2015-11-16 19:52:32 ★ Richard Hawkins would then stand back up and walks over to the BMW.
  4. 2015-11-16 19:52:54 ★ Richard Hawkins would then place the toolbox down onto the ground near the elevator.
  5. 2015-11-16 19:53:19 ★ Richard Hawkins would then walk to the back of the car as he then presses a button and opens the trunk-
  6. 2015-11-16 19:53:24 ★ of the vehicle. ((Richard Hawkins))
  7. 2015-11-16 19:55:59 ★ Richard Hawkins would then reach out for the new BBS Rims, which have the Brand new Toyo Proxes R888-
  8. 2015-11-16 19:56:07 ★ tyres already on them. ((Richard Hawkins))
  9. 2015-11-16 19:56:42 ★ Richard Hawkins would then use both of his hands as he then lifts out the first one and rolls it to the -
  10. 2015-11-16 19:57:04 ★ right fron corner of the bmw, as he then lowers it down onto it's side. ((Richard Hawkins))
  11. 2015-11-16 19:57:31 ★ Richard Hawkins would then walk back to the trunk as he then again uses both of his hands as he lifts out
  12. 2015-11-16 19:58:06 ★ the second wheel and rolls it to the right rear corner of the BMW, and lowers it down onto ((Richard Hawkins))
  13. 2015-11-16 19:58:15 ★ its side. ((Richard Hawkins))
  14. 2015-11-16 19:59:18 ★ Richard Hawkins would then walk back to the trunk as he then seperates the last two wheels and grabs ahold
  15. 2015-11-16 19:59:43 ★ of them with one of the rims in his right hand and the second one in his left hand. ((Richard Hawkins))
  16. 2015-11-16 20:00:09 ★ Richard Hawkins would then walk to the left side of the car as he carries the rims .
  17. 2015-11-16 20:00:41 ★ Richard Hawkins would place down one of the rims next to the leftside rear end and the second one to the
  18. 2015-11-16 20:00:47 ★ front end. ((Richard Hawkins))
  19. 2015-11-16 20:01:30 ★ Richard Hawkins would then walk back tothe toolstation as he then picks up four plastic pads, with both of
  20. 2015-11-16 20:01:33 ★ his hands. ((Richard Hawkins))
  21. 2015-11-16 20:03:27 ★ Richard Hawkins would then walk back over to the lift as he then bends down and places one of the plastic
  22. 2015-11-16 20:03:38 ★ pad to each end of the skirt. ((Richard Hawkins))
  23. 2015-11-16 20:04:01 ★ Richard Hawkins would then walk to the control panel of the lift as he then presses on the button to raise
  24. 2015-11-16 20:04:28 ★ center part of the lift. ((Richard Hawkins))
  25. 2015-11-16 20:04:50 ★ Richard Hawkins would take his finger off the button as soon as all four wheels are off the ground.
  26. 2015-11-16 20:05:31 ★ Richard Hawkins would then walk back to the toolbox, which is placed near the front of the car.
  27. 2015-11-16 20:06:24 ★ Richard Hawkins would then bend down and picks it up with his right hand as he then takes the toolbox and
  28. 2015-11-16 20:06:38 ★ takes it to the left front wheel. ((Richard Hawkins))
  29. 2015-11-16 20:07:21 ★ Richard Hawkins would then place the toolbox down and bends down to it to take out a breaker bar.
  30. 2015-11-16 20:07:41 ★ Richard Hawkins would then take out a 17mm socket aswell as he then connects it to the breaker bar.
  31. 2015-11-16 20:08:19 ★ Richard Hawkins would then use the breaker bar to loosen up all 5 wheelbolts, as he then takes them off by
  32. 2015-11-16 20:08:23 ★ hand. ((Richard Hawkins))
  33. 2015-11-16 20:08:44 ★ and places them into his pocket ((Richard Hawkins))
  34. 2015-11-16 20:10:25 ★ Richard Hawkins would then grab ahold of the wheel as he then uses force to pull it away from the wheelhub.
  35. 2015-11-16 20:12:05 ★ Richard Hawkins would then turn around as he then bends down and places the old wheel next to the new one an
  36. 2015-11-16 20:12:18 ★ d lowers it down on its side. ((Richard Hawkins))
  37. 2015-11-16 20:13:06 ★ Richard Hawkins would then grab ahold of the new wheel which has tje Toyo Proxes r888 tyre on it and
  38. 2015-11-16 20:13:21 ★ lifts it into place, using both of his hands. ((Richard Hawkins))
  39. 2015-11-16 20:13:52 ★ Richard Hawkins would then hold the wheel in place with his left hand and diggs into his pocket to take out
  40. 2015-11-16 20:14:29 ★ the new bolts for the rim, as he then starts to screw them in one by one. ((Richard Hawkins))
  41. 2015-11-16 20:14:46 ★ Richard Hawkins would then reach for the breaker bar as he then disconnects the 17mm socket and bends
  42. 2015-11-16 20:15:12 ★ down to his toolbox and takes out the torque bar. ((Richard Hawkins))
  43. 2015-11-16 20:15:44 ★ Richard Hawkins would then connect the socket to the torque bar as he then starts to tighten the bolts to
  44. 2015-11-16 20:15:50 ★ 125N:M ((Richard Hawkins))
  45. 2015-11-16 20:16:18 ★ Richard Hawkins would then check the bolts once againa before moving to the next wheel
  46. 2015-11-16 20:18:58 ★ Richard Hawkins would then walk to the next wheel as he then gently pushes the toolbox to the left rear end
  47. 2015-11-16 20:19:01 ★ of the car. ((Richard Hawkins))
  48. 2015-11-16 20:20:30 ★ Richard Hawkins would then bend down as he disconnects the 17mm socket from the torque bar and
  49. 2015-11-16 20:20:39 ★ places it down into the toolbox. ((Richard Hawkins))
  50. 2015-11-16 20:20:55 ★ Richard Hawkins would then reach for the breaker bar and connects the 17mm socket to it.
  51. 2015-11-16 20:21:35 ★ Richard Hawkins would then use the breaker bar to loosen up all 5 wheelbolts and places it down into the
  52. 2015-11-16 20:21:38 ★ toolbox. ((Richard Hawkins))
  53. 2015-11-16 20:22:14 ★ Richard Hawkins would then use his hand to remove all 5 wheelbolts as he then places it into his pocket.
  54. 2015-11-16 20:22:30 ★ Richard Hawkins would then grab ahold of the wheel and pulls it away from the wheelhub.
  55. 2015-11-16 20:22:59 ★ Richard Hawkins would then places the wheel down onto the ground as he then lowers it down
  56. 2015-11-16 20:23:04 ★ onto it's side. ((Richard Hawkins))
  57. 2015-11-16 20:23:17 ★ Richard Hawkins would then let go from the wheel and reaches for the new one.
  58. 2015-11-16 20:23:43 ★ Richard Hawkins would then lift the new wheel to the wheelhub as he then holds it inplace with his left hand
  59. 2015-11-16 20:23:57 ★ and diggs for new bolts with his right one. ((Richard Hawkins))
  60. 2015-11-16 20:24:13 ★ Richard Hawkins would then insert and screw on the bolts by hand as he then reaches for the
  61. 2015-11-16 20:24:23 ★ breaker bar and disconnects the 17mm socket. ((Richard Hawkins))
  62. 2015-11-16 20:24:45 ★ Richard Hawkins would then bend down to the toolbox and takes the torque wrench again.
  63. 2015-11-16 20:25:08 ★ Richard Hawkins would then connect the 17mm socket to the torque bar and uses it to tighten all
  64. 2015-11-16 20:25:16 ★ 5 wheelbolts to 125 N:M ((Richard Hawkins))
  65. 2015-11-16 20:25:56 ★ Richard Hawkins would check the bolts once again with the torque bar as he then moves on to the right side
  66. 2015-11-16 20:26:01 ★ of the vehicle. ((Richard Hawkins))
  67. 2015-11-16 20:26:27 ★ Richard Hawkins would then bend down as he places the torque bar into the toolbox and picks the toolbox
  68. 2015-11-16 20:26:31 ★ up. ((Richard Hawkins))
  69. 2015-11-16 20:26:56 ★ Richard Hawkins would then walk to the right side of the vehicle, as he then places the toolbox down next
  70. 2015-11-16 20:27:13 ★ to the right rear end of the car. ((Richard Hawkins))
  71. 2015-11-16 20:27:36 ★ Richard Hawkins would then place the toolbox down as he then bends down to it and
  72. 2015-11-16 20:27:52 ★ disconnects the 17mm socket from the torque bar. ((Richard Hawkins))
  73. 2015-11-16 20:28:17 ★ Richard Hawkins would then reach for the breaker bar and connects the 17mm socket to it.
  74. 2015-11-16 20:28:41 ★ Richard Hawkins would then loosen up all 5 bolts of the wheel as he then removes the bolts with his hands
  75. 2015-11-16 20:28:49 ★ and places them into his pocket. ((Richard Hawkins))
  76. 2015-11-16 20:29:09 ★ Richard Hawkins would then grab ahold of the wheel as he then pulls it away from the wheel hub.
  77. 2015-11-16 20:29:29 ★ Richard Hawkins would then place the wheel down next to the new one and lowers it down onto its side.
  78. 2015-11-16 20:29:50 ★ Richard Hawkins would then walk to the front right wheel of the vehicle as he then uses the breaker bar
  79. 2015-11-16 20:30:07 ★ with the 17mm socket to loosen up the 5 wheelbolts. ((Richard Hawkins))
  80. 2015-11-16 20:30:22 ★ Richard Hawkins would then remove the bolts and places it into his pocket.
  81. 2015-11-16 20:30:43 ★ Richard Hawkins would then grab ahold of the wheel with both of his hands and pulls on it, removing it
  82. 2015-11-16 20:30:48 ★ form the wheelhub. ((Richard Hawkins))
  83. 2015-11-16 20:31:18 ★ Richard Hawkins would then place the old wheeö next to the new one and lowers it down onto its side.
  84. 2015-11-16 20:31:49 ★ Richard Hawkins would then walk back to the rear end as he then grabs ahold of the new wheel and lifts
  85. 2015-11-16 20:31:56 ★ it up to the wheelhub. ((Richard Hawkins))
  86. 2015-11-16 20:32:20 ★ Richard Hawkins would then hold the wheel in place with his left hand as he diggs for some new bolts with
  87. 2015-11-16 20:32:26 ★ his right hand. ((Richard Hawkins))
  88. 2015-11-16 20:32:56 ★ Richard Hawkins would then disconnect the 17mm socket from the breaker bar as he then reaches for the
  89. 2015-11-16 20:33:02 ★ torque bar. ((Richard Hawkins))
  90. 2015-11-16 20:33:25 ★ Richard Hawkins would then connect the socket to the torque bar and uses it to tighten all 5 wheelnuts
  91. 2015-11-16 20:33:33 ★ 125N:M ((Richard Hawkins))
  92. 2015-11-16 20:33:53 ★ Richard Hawkins would then walk to the front of the vehicle as he then places the torque bar down
  93. 2015-11-16 20:34:19 ★ next to the lift and then reaches for the new wheel. ((Richard Hawkins))
  94. 2015-11-16 20:34:39 ★ Richard Hawkins grabs ahold of the new wheel with both of his hands and lifts it to wheel hub and holds
  95. 2015-11-16 20:35:12 ★ it in place with his left hand a s he then takes out the las 5 bolts and screwes them in. ((Richard Hawkins))
  96. 2015-11-16 20:35:31 ★ Richard Hawkins would then use the torque bar to tighten the bolts to 125N:M .
  97. 2015-11-16 20:35:58 ★ Richard Hawkins would then collect all his tools and places them into the toolbox.
  98. 2015-11-16 20:36:14 ★ Richard Hawkins wouldthen rolla ll 4 wheels to the wall of the garage and stacks them.
  99. 2015-11-16 20:36:30 ★ Richard Hawkins would then walk to the control panel of the lift as he then lowers it .
  100. 2015-11-16 20:36:54 ★ Richard Hawkins would then collect all 4 plastic pads as he then takes them to the toolstation.
  101. 2015-11-16 20:37:06 ★ Richard Hawkins would then go and wash his hands at a sink.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!