[ 7224.875718] input: My KMonad output as /devices/virtual/input/input1927
[ 7225.187781] e1000e 0000:00:1f.6 eth0: NIC Link is Down
[ 7225.270116] wlan0: deauthenticating from 6a:e7:c2:7f:f3:c9 by local choice (Reason: 3=DEAUTH_LEAVING)
[ 7225.917778] PM: suspend entry (deep)
[ 7225.960833] Filesystems sync: 0.043 seconds
[ 7226.584311] (NULL device *): firmware: direct-loading firmware i915/kbl_dmc_ver1_04.bin
[ 7226.586788] (NULL device *): firmware: direct-loading firmware iwlwifi-8265-36.ucode
[ 7226.586893] (NULL device *): firmware: direct-loading firmware regulatory.db
[ 7226.586969] (NULL device *): firmware: direct-loading firmware regulatory.db.p7s
[ 7226.589203] Freezing user space processes
[ 7226.594626] Freezing user space processes completed (elapsed 0.005 seconds)
[ 7226.594639] OOM killer disabled.
[ 7226.594643] Freezing remaining freezable tasks
[ 7226.596174] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 7226.596293] printk: Suspending console(s) (use no_console_suspend to debug)
[ 7226.785727] e1000e: EEE TX LPI TIMER: 00000011
[ 7228.220982] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 7229.853517] ACPI: EC: interrupt blocked
[ 7230.132960] ACPI: PM: Preparing to enter system sleep state S3
[ 7230.141953] ACPI: EC: event blocked
[ 7230.141957] ACPI: EC: EC stopped
[ 7230.141959] ACPI: PM: Saving platform NVS memory
[ 7230.142007] Disabling non-boot CPUs ...
[ 7230.145853] smpboot: CPU 1 is now offline
[ 7230.149252] smpboot: CPU 2 is now offline
[ 7230.153843] smpboot: CPU 3 is now offline
[ 7230.158153] smpboot: CPU 4 is now offline
[ 7230.161356] smpboot: CPU 5 is now offline
[ 7230.164203] smpboot: CPU 6 is now offline
[ 7230.167023] smpboot: CPU 7 is now offline
[ 7230.169636] ACPI: PM: Low-level resume complete
[ 7230.169680] ACPI: EC: EC started
[ 7230.169680] ACPI: PM: Restoring platform NVS memory
[ 7230.170740] Enabling non-boot CPUs ...
[ 7230.170782] x86: Booting SMP configuration:
[ 7230.170782] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 7230.171409] CPU1 is up
[ 7230.171442] smpboot: Booting Node 0 Processor 2 APIC 0x4
[ 7230.172089] CPU2 is up
[ 7230.172113] smpboot: Booting Node 0 Processor 3 APIC 0x6
[ 7230.172780] CPU3 is up
[ 7230.172805] smpboot: Booting Node 0 Processor 4 APIC 0x1
[ 7230.173636] CPU4 is up
[ 7230.173664] smpboot: Booting Node 0 Processor 5 APIC 0x3
[ 7230.174425] CPU5 is up
[ 7230.174449] smpboot: Booting Node 0 Processor 6 APIC 0x5
[ 7230.175433] CPU6 is up
[ 7230.175457] smpboot: Booting Node 0 Processor 7 APIC 0x7
[ 7230.176319] CPU7 is up
[ 7230.178542] ACPI: PM: Waking up from system sleep state S3
[ 7230.688352] ACPI: EC: interrupt unblocked
[ 7230.688815] pcieport 0000:00:1c.6: Intel SPT PCH root port ACS workaround enabled
[ 7230.688940] pcieport 0000:00:1d.2: Intel SPT PCH root port ACS workaround enabled
[ 7230.692188] pcieport 0000:00:1d.0: Intel SPT PCH root port ACS workaround enabled
[ 7230.802241] pcieport 0000:00:1c.0: Intel SPT PCH root port ACS workaround enabled
[ 7230.935785] nvidia 0000:01:00.0: Enabling HDA controller
[ 7232.153548] ACPI: EC: event unblocked
[ 7232.159260] xhci_hcd 0000:3c:00.0: xHC error in resume, USBSTS 0x401, Reinit
[ 7232.159267] usb usb3: root hub lost power or was reset
[ 7232.159271] usb usb4: root hub lost power or was reset
[ 7232.159867] i915 0000:00:02.0: [drm] [ENCODER:94:DDI A/PHY A] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7232.159906] i915 0000:00:02.0: [drm] [ENCODER:102:DDI B/PHY B] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7232.159912] i915 0000:00:02.0: [drm] [ENCODER:118:DDI C/PHY C] is disabled/in DSI mode with an ungated DDI clock, gate it
[ 7232.168750] nvme nvme0: 8/0/0 default/read/poll queues
[ 7232.535583] usb 1-8: reset high-speed USB device number 3 using xhci_hcd
[ 7232.811789] usb 1-7: reset full-speed USB device number 2 using xhci_hcd
[ 7233.156341] usb 2-3: reset SuperSpeed USB device number 2 using xhci_hcd
[ 7233.204854] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_component_ops [i915])
[ 7233.206131] pci_bus 0000:06: Allocating resources
[ 7233.206170] pci_bus 0000:3c: Allocating resources
[ 7233.206804] OOM killer enabled.
[ 7233.206812] Restarting tasks ...
[ 7233.206816] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[ 7233.206842] pci_bus 0000:06: Allocating resources
[ 7233.206867] pci_bus 0000:3c: Allocating resources
[ 7233.206959] usb 1-9: USB disconnect, device number 20
[ 7233.207500] Bluetooth: hci0: Device revision is 16
[ 7233.207512] Bluetooth: hci0: Secure boot is enabled
[ 7233.207519] Bluetooth: hci0: OTP lock is enabled
[ 7233.207524] Bluetooth: hci0: API lock is enabled
[ 7233.207529] Bluetooth: hci0: Debug lock is disabled
[ 7233.207534] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[ 7233.208274] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.sfi
[ 7233.208292] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[ 7233.221841] done.
[ 7233.221894] random: crng reseeded on system resumption
[ 7233.335181] usb 1-9: new full-speed USB device number 21 using xhci_hcd
[ 7233.492776] usb 1-9: New USB device found, idVendor=06cb, idProduct=009a, bcdDevice= 1.64
[ 7233.492787] usb 1-9: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[ 7233.492792] usb 1-9: SerialNumber: 3243b486971a
[ 7233.500089] PM: suspend exit
[ 7233.949131] input: My KMonad output as /devices/virtual/input/input1928
[ 7234.944461] Bluetooth: hci0: Waiting for firmware download to complete
[ 7234.944475] Bluetooth: hci0: Firmware loaded in 1695510 usecs
[ 7234.944618] Bluetooth: hci0: Waiting for device to boot
[ 7234.957556] Bluetooth: hci0: Device booted in 12700 usecs
[ 7234.957655] bluetooth hci0: firmware: direct-loading firmware intel/ibt-12-16.ddc
[ 7234.957668] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[ 7234.960558] Bluetooth: hci0: Applying Intel DDC parameters completed
[ 7234.961574] Bluetooth: hci0: Firmware revision 0.1 build 19 week 44 2021
[ 7235.014084] Bluetooth: MGMT ver 1.22
[ 7237.480341] wlan0: authenticate with 6a:e7:c2:7f:f3:c9
[ 7237.480359] wlan0: 80 MHz not supported, disabling VHT
[ 7237.490991] wlan0: send auth to 6a:e7:c2:7f:f3:c9 (try 1/3)
[ 7237.517175] wlan0: authenticated
[ 7237.519094] wlan0: associate with 6a:e7:c2:7f:f3:c9 (try 1/3)
[ 7237.539176] wlan0: RX AssocResp from 6a:e7:c2:7f:f3:c9 (capab=0x431 status=0 aid=31)
[ 7237.542536] wlan0: associated
[ 7237.639881] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 7237.706878] input: My KMonad output as /devices/virtual/input/input1929
[ 7241.495496] input: My KMonad output as /devices/virtual/input/input1930
[ 7245.303366] input: My KMonad output as /devices/virtual/input/input1931
[ 7249.111817] input: My KMonad output as /devices/virtual/input/input1932
[ 7252.824408] input: My KMonad output as /devices/virtual/input/input1933
[ 7256.498980] input: My KMonad output as /devices/virtual/input/input1934
[ 7260.224137] input: My KMonad output as /devices/virtual/input/input1935