Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- bolo@bolo-EP31-DS3L:~$ journalctl -b -1
- -- Logs begin at Sun 2021-01-31 15:13:18 CET, end at Mon 2021-02-01 19:53:10 CET. --
- lut 01 19:50:08 bolo-EP31-DS3L kernel: microcode: microcode updated early to revision 0x70a, dat
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Linux version 5.4.0-65-generic (buildd@lgw01-amd64-048) (
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-generic r
- lut 01 19:50:08 bolo-EP31-DS3L kernel: KERNEL supported cpus:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Intel GenuineIntel
- lut 01 19:50:08 bolo-EP31-DS3L kernel: AMD AuthenticAMD
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Hygon HygonGenuine
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Centaur CentaurHauls
- lut 01 19:50:08 bolo-EP31-DS3L kernel: zhaoxin Shanghai
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86/fpu: x87 FPU will use FXSAVE
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-provided physical RAM map:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] us
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x0000000000100000-0x00000000bfedffff] us
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x00000000bfee0000-0x00000000bfee2fff] AC
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x00000000bfee3000-0x00000000bfeeffff] AC
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x00000000bfef0000-0x00000000bfefffff] re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] us
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NX (Execute Disable) protection: active
- lut 01 19:50:08 bolo-EP31-DS3L kernel: SMBIOS 2.4 present.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMI: Gigabyte Technology Co., Ltd. EP31-DS3L/EP31-DS3L, B
- lut 01 19:50:08 bolo-EP31-DS3L kernel: tsc: Fast TSC calibration using PIT
- lut 01 19:50:08 bolo-EP31-DS3L kernel: tsc: Detected 2833.288 MHz processor
- lut 01 19:50:08 bolo-EP31-DS3L kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reser
- lut 01 19:50:08 bolo-EP31-DS3L kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: last_pfn = 0x140000 max_arch_pfn = 0x400000000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: MTRR default type: uncachable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: MTRR fixed ranges enabled:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 00000-9FFFF write-back
- lut 01 19:50:08 bolo-EP31-DS3L kernel: A0000-BFFFF uncachable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: C0000-CDFFF write-protect
- lut 01 19:50:08 bolo-EP31-DS3L kernel: CE000-EFFFF uncachable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: F0000-FFFFF write-through
- lut 01 19:50:08 bolo-EP31-DS3L kernel: MTRR variable ranges enabled:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 0 base 000000000 mask F00000000 write-back
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 1 base 0C0000000 mask FC0000000 uncachable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 2 base 100000000 mask FC0000000 write-back
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 3 base 0BFF00000 mask FFFF00000 uncachable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 4 disabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 5 disabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 6 disabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 7 disabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC-
- lut 01 19:50:08 bolo-EP31-DS3L kernel: total RAM covered: 4095M
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Found optimal setting for mtrr clean up
- lut 01 19:50:08 bolo-EP31-DS3L kernel: gran_size: 64K chunk_size: 2M num_reg: 4
- lut 01 19:50:08 bolo-EP31-DS3L kernel: e820: update [mem 0xbff00000-0xffffffff] usable ==> reser
- lut 01 19:50:08 bolo-EP31-DS3L kernel: last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: found SMP MP-table at [mem 0x000f4f90-0x000f4f9f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: check: Scanning 1 areas for low memory corruption
- lut 01 19:50:08 bolo-EP31-DS3L kernel: RAMDISK: [mem 0x2ff39000-0x33f93fff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Early table checksum verification disabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: RSDP 0x00000000000F6980 000014 (v00 GBT )
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: RSDT 0x00000000BFEE3040 000038 (v01 GBT GBTUACPI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: FACP 0x00000000BFEE30C0 000074 (v01 GBT GBTUACPI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: DSDT 0x00000000BFEE3180 0039B2 (v01 GBT GBTUACPI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: FACS 0x00000000BFEE0000 000040
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: HPET 0x00000000BFEE6C80 000038 (v01 GBT GBTUACPI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: MCFG 0x00000000BFEE6D00 00003C (v01 GBT GBTUACPI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: APIC 0x00000000BFEE6B80 000084 (v01 GBT GBTUACPI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: SSDT 0x00000000BFEE7660 0003AB (v01 PmRef CpuPm
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Local APIC address 0xfee00000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: No NUMA configuration found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Faking a node at [mem 0x0000000000000000-0x000000013fffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NODE_DATA(0) allocated [mem 0x13ffd2000-0x13fffcfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Zone ranges:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA [mem 0x0000000000001000-0x0000000000ffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Normal [mem 0x0000000100000000-0x000000013fffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Device empty
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Movable zone start for each node
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Early memory node ranges
- lut 01 19:50:08 bolo-EP31-DS3L kernel: node 0: [mem 0x0000000000001000-0x000000000009efff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: node 0: [mem 0x0000000000100000-0x00000000bfedffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: node 0: [mem 0x0000000100000000-0x000000013fffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Zeroed struct page in unavailable ranges: 386 pages
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Initmem setup node 0 [mem 0x0000000000001000-0x000000013f
- lut 01 19:50:08 bolo-EP31-DS3L kernel: On node 0 totalpages: 1048190
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA zone: 64 pages used for memmap
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA zone: 21 pages reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA zone: 3998 pages, LIFO batch:0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA32 zone: 12220 pages used for memmap
- lut 01 19:50:08 bolo-EP31-DS3L kernel: DMA32 zone: 782048 pages, LIFO batch:63
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Normal zone: 4096 pages used for memmap
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Normal zone: 262144 pages, LIFO batch:63
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PM-Timer IO Port: 0x408
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Local APIC address 0xfee00000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
- lut 01 19:50:08 bolo-EP31-DS3L kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high leve
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: IRQ0 used by override.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: IRQ9 used by override.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Using ACPI (MADT) for SMP configuration information
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: smpboot: Allowing 4 CPUs, 0 hotplug CPUs
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xbfee0000-0xbfee2fff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xbfee3000-0xbfeeffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xbfef0000-0xbfefffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xbff00000-0xdfffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registered nosave memory: [mem 0xfec00000-0xffffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: [mem 0xbff00000-0xdfffffff] available for PCI devices
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Booting paravirtualized kernel on bare hardware
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: refined-jiffies: mask: 0xffffffff max_cycles
- lut 01 19:50:08 bolo-EP31-DS3L kernel: setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4
- lut 01 19:50:08 bolo-EP31-DS3L kernel: percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u52428
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pcpu-alloc: s188416 r8192 d28672 u524288 alloc=1*2097152
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pcpu-alloc: [0] 0 1 2 3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Built 1 zonelists, mobility grouping on. Total pages: 10
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Policy zone: Normal
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.0-65-ge
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Dentry cache hash table entries: 524288 (order: 10, 41943
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Inode-cache hash table entries: 262144 (order: 9, 2097152
- lut 01 19:50:08 bolo-EP31-DS3L kernel: mem auto-init: stack:off, heap alloc:on, heap free:off
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Calgary: detecting Calgary via BIOS EBDA area
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Calgary: Unable to locate Rio Grande table in EBDA - bail
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Memory: 3955240K/4192760K available (14339K kernel code,
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: get_random_u64 called from __kmem_cache_create+0x
- lut 01 19:50:08 bolo-EP31-DS3L kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Kernel/User page tables isolation: enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ftrace: allocating 44263 entries in 173 pages
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rcu: Hierarchical RCU implementation.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rcu: RCU restricting CPUs from NR_CPUS=8192 to nr
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Tasks RCU enabled.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rcu: RCU calculated value of scheduler-enlistment delay i
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_id
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
- lut 01 19:50:08 bolo-EP31-DS3L kernel: vt handoff: transparent VT on vt#1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Console: colour dummy device 80x25
- lut 01 19:50:08 bolo-EP31-DS3L kernel: printk: console [tty0] enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Core revision 20190816
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xfffffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: APIC: Switch to symmetric I/O mode setup
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: tsc-early: mask: 0xffffffffffffffff max_cycl
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Calibrating delay loop (skipped), value calculated using
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pid_max: default: 32768 minimum: 301
- lut 01 19:50:08 bolo-EP31-DS3L kernel: LSM: Security Framework initializing
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Yama: becoming mindful.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: AppArmor: AppArmor initialized
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 byt
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Mountpoint-cache hash table entries: 8192 (order: 4, 6553
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE tmpfs ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE proc ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE cgroup1 ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE cgroup2 ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: mce: CPU0: Thermal monitoring enabled (TM2)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: process: using mwait in idle threads
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Spectre V1 : Mitigation: usercopy/swapgs barriers and __u
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Spectre V2 : Mitigation: Full generic retpoline
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Speculative Store Bypass: Vulnerable
- lut 01 19:50:08 bolo-EP31-DS3L kernel: MDS: Vulnerable: Clear CPU buffers attempted, no microcod
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Freeing SMP alternatives memory: 40K
- lut 01 19:50:08 bolo-EP31-DS3L kernel: smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR,
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... version: 2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... bit width: 40
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... generic registers: 2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... value mask: 000000ffffffffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... max period: 000000007fffffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... fixed-purpose events: 3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ... event mask: 0000000700000003
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rcu: Hierarchical SRCU implementation.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NMI watchdog: Enabled. Permanently consumes one hw-PMU co
- lut 01 19:50:08 bolo-EP31-DS3L kernel: smp: Bringing up secondary CPUs ...
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86: Booting SMP configuration:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: .... node #0, CPUs: #1 #2 #3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: smp: Brought up 1 node, 4 CPUs
- lut 01 19:50:08 bolo-EP31-DS3L kernel: smpboot: Max logical packages: 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: smpboot: Total of 4 processors activated (22666.30 BogoMI
- lut 01 19:50:08 bolo-EP31-DS3L kernel: devtmpfs: initialized
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86/mm: Memory block size: 128MB
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Registering ACPI NVS region [mem 0xbfee0000-0xbfee2ff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, li
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pinctrl core: initialized pinctrl subsystem
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: RTC time: 18:49:56, date: 2021-02-01
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NET: Registered protocol family 16
- lut 01 19:50:08 bolo-EP31-DS3L kernel: audit: initializing netlink subsys (disabled)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: audit: type=2000 audit(1612205396.156:1): state=initializ
- lut 01 19:50:08 bolo-EP31-DS3L kernel: EISA bus registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: cpuidle: using governor ladder
- lut 01 19:50:08 bolo-EP31-DS3L kernel: cpuidle: using governor menu
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: bus type PCI registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: Using configuration type 1 for base access
- lut 01 19:50:08 bolo-EP31-DS3L kernel: HugeTLB registered 2.00 MiB page size, pre-allocated 0 pa
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(Module Device)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(Processor Device)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(Processor Aggregator Device)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(Linux-Dell-Video)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: 2 ACPI AML tables successfully acquired and loaded
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Dynamic OEM Table Load:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: SSDT 0xFFFF9179FAA36400 00022A (v01 PmRef Cpu0Ist
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Dynamic OEM Table Load:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: SSDT 0xFFFF9179FA915800 000152 (v01 PmRef Cpu1Ist
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Dynamic OEM Table Load:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: SSDT 0xFFFF9179FA914800 000152 (v01 PmRef Cpu2Ist
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Dynamic OEM Table Load:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: SSDT 0xFFFF9179FA914200 000152 (v01 PmRef Cpu3Ist
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Interpreter enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: (supports S0 S3 S4 S5)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Using IOAPIC for interrupt routing
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: Using host bridge windows from ACPI; if necessary, u
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Enabled 9 GPEs in block 00 to 1F
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
- lut 01 19:50:08 bolo-EP31-DS3L kernel: acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM C
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI host bridge to bus 0000:00
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 win
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff win
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000d
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: root bus resource [mem 0xbff00000-0xfebf
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: root bus resource [bus 00-3f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1b.0: reg 0x10: [mem 0xe8100000-0xe8103fff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xe8104000-0xe81043ff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by I
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by I
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 080
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 029
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018a
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf00f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.2: PME# supported from D3hot
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: [10de:0fc6] type 00 class 0x030000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: reg 0x10: [mem 0xe4000000-0xe4ffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: reg 0x24: [io 0xc000-0xc07f]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pr
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, li
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.1: [10de:0e1b] type 00 class 0x040300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.1: reg 0x10: [mem 0xe6000000-0xe6003fff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe6fff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: reg 0x10: [io 0xd000-0xd0ff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: reg 0x18: [mem 0xe8010000-0xe8010fff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: reg 0x20: [mem 0xe8000000-0xe800ffff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pr
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: supports D1 D2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3co
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: ASPM: current common clock configuratio
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: PCI bridge to [bus 03]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: bridge window [mem 0xe7000000-0xe7fff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: bridge window [mem 0xe8000000-0xe80ff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: extended config space not accessible
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive dec
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 wind
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff wind
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bf
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000df
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [mem 0xbff00000-0xfebff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 *
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11
- lut 01 19:50:08 bolo-EP31-DS3L kernel: iommu: Default domain type: Translated
- lut 01 19:50:08 bolo-EP31-DS3L kernel: SCSI subsystem initialized
- lut 01 19:50:08 bolo-EP31-DS3L kernel: libata version 3.00 loaded.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: vgaarb: setting as boot VGA device
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+me
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: vgaarb: bridge control possible
- lut 01 19:50:08 bolo-EP31-DS3L kernel: vgaarb: loaded
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: bus type USB registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usbcore: registered new interface driver usbfs
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usbcore: registered new interface driver hub
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usbcore: registered new device driver usb
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pps_core: LinuxPPS API ver. 1 registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodol
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PTP clock support registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: EDAC MC: Ver: 3.0.0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: Using ACPI for IRQ routing
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: pci_cache_line_size set to 64 bytes
- lut 01 19:50:08 bolo-EP31-DS3L kernel: e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: e820: reserve RAM buffer [mem 0xbfee0000-0xbfffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NetLabel: Initializing
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NetLabel: domain hash size = 128
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NetLabel: unlabeled traffic allowed by default
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hpet: 3 channels of 0 reserved for per-cpu timers
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: Switched to clocksource tsc-early
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE bpf ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: VFS: Disk quotas dquot_6.6.0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE ramfs ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE hugetlbfs ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: AppArmor: AppArmor Filesystem Enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pnp: PnP ACPI init
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:00: [io 0x04d0-0x04d1] has been reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:00: [io 0x0290-0x029f] has been reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:00: [io 0x0800-0x087f] has been reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:00: [io 0x0290-0x0294] has been reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:00: [io 0x0880-0x088f] has been reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c02 (act
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:04: [io 0x0400-0x04bf] could not be reserved
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:04: Plug and Play ACPI device, IDs PNP0c02 (act
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:05: [mem 0xe0000000-0xe3ffffff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (act
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x000ce400-0x000cffff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x000f0000-0x000f7fff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x000f8000-0x000fbfff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x000fc000-0x000fffff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xbfee0000-0xbfefffff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x00000000-0x0009ffff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x00100000-0xbfedffff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xfec00000-0xfec00fff] could not be re
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xfed13000-0xfed1dfff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xfee00000-0xfee00fff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0xfff00000-0xffffffff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: [mem 0x000e0000-0x000effff] has been reserv
- lut 01 19:50:08 bolo-EP31-DS3L kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c01 (act
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pnp: PnP ACPI: found 7 devices
- lut 01 19:50:08 bolo-EP31-DS3L kernel: thermal_sys: Registered thermal governor 'fair_share'
- lut 01 19:50:08 bolo-EP31-DS3L kernel: thermal_sys: Registered thermal governor 'bang_bang'
- lut 01 19:50:08 bolo-EP31-DS3L kernel: thermal_sys: Registered thermal governor 'step_wise'
- lut 01 19:50:08 bolo-EP31-DS3L kernel: thermal_sys: Registered thermal governor 'user_space'
- lut 01 19:50:08 bolo-EP31-DS3L kernel: thermal_sys: Registered thermal governor 'power_allocator
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000ffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000ffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: BAR 14: assigned [mem 0xe8200000-0xe83f
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xe8400000-0xe85f
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: BAR 6: assigned [mem 0xe5000000-0xe507f
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: bridge window [mem 0xe4000000-0xe6fff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:01.0: bridge window [mem 0xc0000000-0xdffff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: bridge window [io 0xb000-0xbfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: bridge window [mem 0xe8200000-0xe83ff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.0: bridge window [mem 0xe8400000-0xe85ff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:03:00.0: BAR 6: assigned [mem 0xe7000000-0xe700f
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: PCI bridge to [bus 03]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: bridge window [mem 0xe7000000-0xe7fff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1c.3: bridge window [mem 0xe8000000-0xe80ff
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff wi
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff wi
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:00: resource 8 [mem 0xbff00000-0xfebfffff wi
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:01: resource 1 [mem 0xe4000000-0xe6ffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:01: resource 2 [mem 0xc0000000-0xdfffffff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:02: resource 1 [mem 0xe8200000-0xe83fffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:02: resource 2 [mem 0xe8400000-0xe85fffff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:03: resource 1 [mem 0xe7000000-0xe7ffffff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:03: resource 2 [mem 0xe8000000-0xe80fffff 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff wi
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff wi
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci_bus 0000:04: resource 8 [mem 0xbff00000-0xfebfffff wi
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NET: Registered protocol family 2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: tcp_listen_portaddr_hash hash table entries: 2048 (order:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: TCP established hash table entries: 32768 (order: 6, 2621
- lut 01 19:50:08 bolo-EP31-DS3L kernel: TCP bind hash table entries: 32768 (order: 7, 524288 byte
- lut 01 19:50:08 bolo-EP31-DS3L kernel: TCP: Hash tables configured (established 32768 bind 32768
- lut 01 19:50:08 bolo-EP31-DS3L kernel: UDP hash table entries: 2048 (order: 4, 65536 bytes, line
- lut 01 19:50:08 bolo-EP31-DS3L kernel: UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes,
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NET: Registered protocol family 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NET: Registered protocol family 44
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.0: Video device with shadowed ROM at [mem
- lut 01 19:50:08 bolo-EP31-DS3L kernel: pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI: CLS 32 bytes, default 64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Trying to unpack rootfs image as initramfs...
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Freeing initrd memory: 65900K
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: software IO TLB: mapped [mem 0xbbee0000-0xbfee0000] (64MB
- lut 01 19:50:08 bolo-EP31-DS3L kernel: check: Scanning for low memory corruption every 60 second
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Initialise system trusted keyrings
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type blacklist registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: workingset: timestamp_bits=36 max_order=20 bucket_order=0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: zbud: loaded
- lut 01 19:50:08 bolo-EP31-DS3L kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
- lut 01 19:50:08 bolo-EP31-DS3L kernel: fuse: init (API version 7.31)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE fuse ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: *** VALIDATE fuse ***
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Platform Keyring initialized
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type asymmetric registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Asymmetric key parser 'x509' registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded
- lut 01 19:50:08 bolo-EP31-DS3L kernel: io scheduler mq-deadline registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: shpchp: Standard Hot Plug PCI Controller Driver version:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: vesafb: scrolling: redraw
- lut 01 19:50:08 bolo-EP31-DS3L kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: vesafb: framebuffer at 0xd1000000, mapped to 0x(____ptrva
- lut 01 19:50:08 bolo-EP31-DS3L kernel: fbcon: Deferring console take-over
- lut 01 19:50:08 bolo-EP31-DS3L kernel: fb0: VESA VGA frame buffer device
- lut 01 19:50:08 bolo-EP31-DS3L kernel: intel_idle: does not run on family 6 model 23
- lut 01 19:50:08 bolo-EP31-DS3L kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/P
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Power Button [PWRB]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/i
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ACPI: Power Button [PWRF]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) i
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Linux agpgart interface v0.103
- lut 01 19:50:08 bolo-EP31-DS3L kernel: loop: module loaded
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata_piix 0000:00:1f.2: version 2.13
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- lut 01 19:50:08 bolo-EP31-DS3L kernel: scsi host0: ata_piix
- lut 01 19:50:08 bolo-EP31-DS3L kernel: scsi host1: ata_piix
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008
- lut 01 19:50:08 bolo-EP31-DS3L kernel: libphy: Fixed MDIO Bus: probed
- lut 01 19:50:08 bolo-EP31-DS3L kernel: tun: Universal TUN/TAP device driver, 1.6
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PPP generic driver version 2.4.2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: VFIO - User Level meta-driver version: 0.3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Drive
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-pci: EHCI PCI platform driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-pci 0000:00:1d.7: cache line size of 32 is not suppo
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xe8104000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb1: New USB device strings: Mfr=3, Product=2, Seria
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb1: Product: EHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb1: Manufacturer: Linux 5.4.0-65-generic ehci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb1: SerialNumber: 0000:00:1d.7
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 1-0:1.0: USB hub found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 1-0:1.0: 8 ports detected
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ehci-platform: EHCI generic platform driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ohci-pci: OHCI PCI platform driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ohci-platform: OHCI generic platform driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd: USB Universal Host Controller Interface driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.0: detected 2 ports
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb2: New USB device strings: Mfr=3, Product=2, Seria
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb2: Product: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb2: Manufacturer: Linux 5.4.0-65-generic uhci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb2: SerialNumber: 0000:00:1d.0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 2-0:1.0: USB hub found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 2-0:1.0: 2 ports detected
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.1: detected 2 ports
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb3: New USB device strings: Mfr=3, Product=2, Seria
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb3: Product: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb3: Manufacturer: Linux 5.4.0-65-generic uhci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb3: SerialNumber: 0000:00:1d.1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 3-0:1.0: USB hub found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 3-0:1.0: 2 ports detected
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.2: detected 2 ports
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb4: New USB device strings: Mfr=3, Product=2, Seria
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb4: Product: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb4: Manufacturer: Linux 5.4.0-65-generic uhci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb4: SerialNumber: 0000:00:1d.2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 4-0:1.0: USB hub found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 4-0:1.0: 2 ports detected
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.3: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned b
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.3: detected 2 ports
- lut 01 19:50:08 bolo-EP31-DS3L kernel: uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb5: New USB device found, idVendor=1d6b, idProduct=
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb5: New USB device strings: Mfr=3, Product=2, Seria
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb5: Product: UHCI Host Controller
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb5: Manufacturer: Linux 5.4.0-65-generic uhci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb usb5: SerialNumber: 0000:00:1d.3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 5-0:1.0: USB hub found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hub 5-0:1.0: 2 ports detected
- lut 01 19:50:08 bolo-EP31-DS3L kernel: i8042: PNP: No PS/2 controller found.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: i8042: Probing ports directly.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: i8042: Failed to disable AUX port, but continuing anyway.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: i8042: If AUX port is really absent please use the 'i8042
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata2.01: NODEV after polling detection
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata2.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata1.00: HPA detected: current 488395055, native 48839716
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata1.00: ATA-7: ST3250310AS, 4.AAA, max UDMA/133
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ata1.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/
- lut 01 19:50:08 bolo-EP31-DS3L kernel: scsi 0:0:0:0: Direct-Access ATA ST3250310AS
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sd 0:0:0:0: [sda] 488395055 512-byte logical blocks: (250
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sd 0:0:0:0: [sda] Write Protect is off
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabl
- lut 01 19:50:08 bolo-EP31-DS3L kernel: scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sda: sda1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sd 0:0:0:0: [sda] Attached SCSI disk
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram
- lut 01 19:50:08 bolo-EP31-DS3L kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sr 1:0:0:0: Attached scsi generic sg1 type 5
- lut 01 19:50:08 bolo-EP31-DS3L kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: mousedev: PS/2 mouse device common for all mice
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rtc_cmos 00:01: RTC can wake from S4
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rtc_cmos 00:01: registered as rtc0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rtc_cmos 00:01: alarms up to one month, 242 bytes nvram,
- lut 01 19:50:08 bolo-EP31-DS3L kernel: i2c /dev entries driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: device-mapper: uevent: version 1.0.3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialis
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Probing EISA bus 0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: EISA: Cannot allocate resource for mainb
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 3
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 4
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 5
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 6
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 7
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: Cannot allocate resource for EISA slot 8
- lut 01 19:50:08 bolo-EP31-DS3L kernel: platform eisa.0: EISA: Detected 0 cards
- lut 01 19:50:08 bolo-EP31-DS3L kernel: intel_pstate: CPU model not supported
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ledtrig-cpu: registered to indicate activity on CPUs
- lut 01 19:50:08 bolo-EP31-DS3L kernel: drop_monitor: Initializing network drop monitor service
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NET: Registered protocol family 10
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Segment Routing with IPv6
- lut 01 19:50:08 bolo-EP31-DS3L kernel: NET: Registered protocol family 17
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type dns_resolver registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: RAS: Correctable Errors collector initialized.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: microcode: sig=0x10677, pf=0x10, revision=0x70a
- lut 01 19:50:08 bolo-EP31-DS3L kernel: microcode: Microcode Update Driver: v2.2.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: IPI shorthand broadcast: enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: sched_clock: Marking stable (1663015212, 163323)->(167361
- lut 01 19:50:08 bolo-EP31-DS3L kernel: registered taskstats version 1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Loading compiled-in X.509 certificates
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Loaded X.509 cert 'Build time autogenerated kernel key: 2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: zswap: loaded using pool lzo/zbud
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type ._fscrypt registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type .fscrypt registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type big_key registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Key type encrypted registered
- lut 01 19:50:08 bolo-EP31-DS3L kernel: AppArmor: AppArmor sha1 policy hashing enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ima: No TPM chip found, activating TPM-bypass!
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ima: Allocated hash algorithm: sha1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: ima: No architecture policies found
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: Initialising EVM extended attributes:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.selinux
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.SMACK64
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.SMACK64EXEC
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.SMACK64TRANSMUTE
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.SMACK64MMAP
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.apparmor
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.ima
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: security.capability
- lut 01 19:50:08 bolo-EP31-DS3L kernel: evm: HMAC attrs: 0x1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: PM: Magic number: 9:745:846
- lut 01 19:50:08 bolo-EP31-DS3L kernel: rtc_cmos 00:01: setting system clock to 2021-02-01T18:49:
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Freeing unused decrypted memory: 2040K
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Freeing unused kernel image memory: 2704K
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Write protecting the kernel read-only data: 22528k
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Freeing unused kernel image memory: 2008K
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Freeing unused kernel image memory: 1212K
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86/mm: Checking user space page tables
- lut 01 19:50:08 bolo-EP31-DS3L kernel: x86/mm: Checked W+X mappings: passed, no W+X pages found.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Run /init as init process
- lut 01 19:50:08 bolo-EP31-DS3L kernel: r8169 0000:03:00.0: can't disable ASPM; OS doesn't have A
- lut 01 19:50:08 bolo-EP31-DS3L kernel: libphy: r8169: probed
- lut 01 19:50:08 bolo-EP31-DS3L kernel: r8169 0000:03:00.0 eth0: RTL8168c/8111c, 00:24:1d:14:15:8
- lut 01 19:50:08 bolo-EP31-DS3L kernel: r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 byt
- lut 01 19:50:08 bolo-EP31-DS3L kernel: r8169 0000:03:00.0 enp3s0: renamed from eth0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 4-2: new low-speed USB device number 2 using uhci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 4-2: New USB device found, idVendor=1c4f, idProduct=0
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 4-2: New USB device strings: Mfr=1, Product=2, Serial
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 4-2: Product: USB Keyboard
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 4-2: Manufacturer: SIGMACHIP
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hidraw: raw HID events driver (C) Jiri Kosina
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usbcore: registered new interface driver usbhid
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usbhid: USB HID core driver
- lut 01 19:50:08 bolo-EP31-DS3L kernel: input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v
- lut 01 19:50:08 bolo-EP31-DS3L kernel: input: SIGMACHIP USB Keyboard Consumer Control as /device
- lut 01 19:50:08 bolo-EP31-DS3L kernel: input: SIGMACHIP USB Keyboard System Control as /devices/
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v
- lut 01 19:50:08 bolo-EP31-DS3L kernel: tsc: Refined TSC clocksource calibration: 2833.278 MHz
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x
- lut 01 19:50:08 bolo-EP31-DS3L kernel: clocksource: Switched to clocksource tsc
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 5-1: new low-speed USB device number 2 using uhci_hcd
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 5-1: New USB device found, idVendor=093a, idProduct=2
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 5-1: New USB device strings: Mfr=0, Product=2, Serial
- lut 01 19:50:08 bolo-EP31-DS3L kernel: usb 5-1: Product: USB OPTICAL MOUSE
- lut 01 19:50:08 bolo-EP31-DS3L kernel: input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1
- lut 01 19:50:08 bolo-EP31-DS3L kernel: hid-generic 0003:093A:2521.0003: input,hidraw2: USB HID v
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: sse2x4 gen() 8402 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: sse2x4 xor() 6069 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: sse2x2 gen() 5230 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: sse2x2 xor() 5743 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: sse2x1 gen() 4372 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: sse2x1 xor() 4667 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: using algorithm sse2x4 gen() 8402 MB/s
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: .... xor() 6069 MB/s, rmw enabled
- lut 01 19:50:08 bolo-EP31-DS3L kernel: raid6: using ssse3x2 recovery algorithm
- lut 01 19:50:08 bolo-EP31-DS3L kernel: xor: measuring software checksum speed
- lut 01 19:50:08 bolo-EP31-DS3L kernel: prefetch64-sse: 13763.000 MB/sec
- lut 01 19:50:08 bolo-EP31-DS3L kernel: generic_sse: 11872.000 MB/sec
- lut 01 19:50:08 bolo-EP31-DS3L kernel: xor: using function: prefetch64-sse (13763.000 MB/sec)
- lut 01 19:50:08 bolo-EP31-DS3L kernel: Btrfs loaded, crc32c=crc32c-generic
- lut 01 19:50:08 bolo-EP31-DS3L kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: fast init done
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: systemd: uninitialized urandom read (16 bytes rea
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SEL
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Detected architecture x86-64.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: systemd: uninitialized urandom read (16 bytes rea
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: systemd: uninitialized urandom read (16 bytes rea
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Set hostname to <bolo-EP31-DS3L>.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: crng init done
- lut 01 19:50:08 bolo-EP31-DS3L kernel: random: 7 urandom warning(s) missed due to ratelimiting
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Created slice User and Session Slice.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Reached target User and Group Name Lookups.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Set up automount Arbitrary Executable File Formats Fi
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Created slice System Slice.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Listening on fsck to fsckd communication Socket.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Listening on udev Kernel Socket.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Listening on Device-mapper event daemon FIFOs.
- lut 01 19:50:08 bolo-EP31-DS3L kernel: EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Mounting POSIX Message Queue File System...
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Mounted Huge Pages File System.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Started Remount Root and Kernel File Systems.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Started Availability of block devices.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Mounted Kernel Debug File System.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Mounted POSIX Message Queue File System.
- lut 01 19:50:08 bolo-EP31-DS3L systemd-journald[337]: Journal started
- lut 01 19:50:08 bolo-EP31-DS3L systemd-journald[337]: Runtime journal (/run/log/journal/7e27983f
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Starting Load/Save Random Seed...
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Activating swap /swapfile...
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Started Journal Service.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Started Uncomplicated firewall.
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Started Create list of required static device nodes f
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Starting Create Static Device Nodes in /dev...
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Starting Flush Journal to Persistent Storage...
- lut 01 19:50:08 bolo-EP31-DS3L systemd[1]: Started udev Coldplug all Devices.
- lut 01 19:50:08 bolo-EP31-DS3L systemd-journald[337]: Time spent on flushing to /var is 4.748779
- lut 01 19:50:08 bolo-EP31-DS3L systemd-journald[337]: System journal (/var/log/journal/7e27983fd
- lut 01 19:50:33 bolo-EP31-DS3L kernel: lp: driver loaded but no devices found
- lut 01 19:50:33 bolo-EP31-DS3L kernel: Adding 2097148k swap on /swapfile. Priority:-2 extents:6
- lut 01 19:50:33 bolo-EP31-DS3L kernel: ppdev: user-space parallel port driver
- lut 01 19:50:33 bolo-EP31-DS3L kernel: parport_pc 00:03: reported by Plug and Play ACPI
- lut 01 19:50:33 bolo-EP31-DS3L kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- lut 01 19:50:33 bolo-EP31-DS3L kernel: lp0: using parport0 (interrupt-driven).
- lines 690-714/714 (END)
Advertisement
Add Comment
Please, Sign In to add comment