Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =============================================
- DISK LAYOUT
- =============================================
- NAME MAJ:MIN RM SIZE RO TYPE UUID FSTYPE
- loop0 7:0 0 491.2M 1 loop squashfs
- sda 8:0 0 233.8G 0 disk
- ├─sda1 8:1 0 200M 0 part 2860-11F4 vfat # EFI
- ├─sda2 8:2 0 203.9G 0 part bb6ccde7-e472-4d92-a48e-07dc82b00bf6 apfs
- ├─sda3 8:3 0 14.8G 0 part b85eae69-13f3-45b5-b26d-0718d9c50816 ext4
- ├─sda4 8:4 0 190M 0 part 7d6ae5cd-3d35-4abb-87c3-11679ee35bd6 ext4 # /boot
- └─sda5 8:5 0 14.3G 0 part 362ce198-43cc-4f9a-8d37-09dc0cf0040f crypto_LUKS # root partition
- └─cryptroot 254:0 0 14.2G 0 crypt d3ae195f-da7a-4e9e-b05a-692fa3f15a13 ext4
- sdb 8:16 1 14.5G 0 disk # install media
- ├─sdb1 8:17 1 200M 0 part 67E3-17ED vfat
- └─sdb2 8:18 1 14.3G 0 part 824E-07FF vfat
- =============================================
- GENERATED FSTAB
- =============================================
- # Static information about the filesystems.
- # See fstab(5) for details.
- # <file system> <dir> <type> <options> <dump> <pass>
- LABEL=archboot /boot ext4 defaults 0 2
- # /dev/mapper/cryptroot
- UUID=d3ae195f-da7a-4e9e-b05a-692fa3f15a13 / ext4 rw,relatime 0 1
- # /dev/sda4 LABEL=archboot
- UUID=7d6ae5cd-3d35-4abb-87c3-11679ee35bd6 /boot ext4 rw,relatime,stripe=4 0 2
- =============================================
- MKINITCPIO.CONF
- =============================================
- # vim:set ft=sh
- # MODULES
- # The following modules are loaded before any boot hooks are
- # run. Advanced users may wish to specify all system modules
- # in this array. For instance:
- # MODULES=(piix ide_disk reiserfs)
- MODULES=()
- # BINARIES
- # This setting includes any additional binaries a given user may
- # wish into the CPIO image. This is run last, so it may be used to
- # override the actual binaries included by a given hook
- # BINARIES are dependency parsed, so you may safely ignore libraries
- BINARIES=()
- # FILES
- # This setting is similar to BINARIES above, however, files are added
- # as-is and are not parsed in any way. This is useful for config files.
- FILES=()
- # HOOKS
- # This is the most important setting in this file. The HOOKS control the
- # modules and scripts added to the image, and what happens at boot time.
- # Order is important, and it is recommended that you do not change the
- # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
- # help on a given hook.
- # 'base' is _required_ unless you know precisely what you are doing.
- # 'udev' is _required_ in order to automatically load modules
- # 'filesystems' is _required_ unless you specify your fs modules in MODULES
- # Examples:
- ## This setup specifies all modules in the MODULES setting above.
- ## No raid, lvm2, or encrypted root is needed.
- # HOOKS=(base)
- #
- ## This setup will autodetect all modules for your system and should
- ## work as a sane default
- # HOOKS=(base udev autodetect block filesystems)
- #
- ## This setup will generate a 'full' image which supports most systems.
- ## No autodetection is done.
- # HOOKS=(base udev block filesystems)
- #
- ## This setup assembles a pata mdadm array with an encrypted root FS.
- ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
- # HOOKS=(base udev block mdadm encrypt filesystems)
- #
- ## This setup loads an lvm2 volume group on a usb device.
- # HOOKS=(base udev block lvm2 filesystems)
- #
- ## NOTE: If you have /usr on a separate partition, you MUST include the
- # usr, fsck and shutdown hooks.
- HOOKS=(base udev autodetect modconf block encrypt filesystems keyboard fsck)
- # COMPRESSION
- # Use this to compress the initramfs image. By default, gzip compression
- # is used. Use 'cat' to create an uncompressed image.
- #COMPRESSION="gzip"
- #COMPRESSION="bzip2"
- #COMPRESSION="lzma"
- #COMPRESSION="xz"
- #COMPRESSION="lzop"
- #COMPRESSION="lz4"
- # COMPRESSION_OPTIONS
- # Additional options for the compressor
- #COMPRESSION_OPTIONS=()
- =============================================
- /ETC/DEFAULT/GRUB
- =============================================
- # GRUB boot loader configuration
- GRUB_DEFAULT=0
- GRUB_TIMEOUT=5
- GRUB_DISTRIBUTOR="Arch"
- GRUB_CMDLINE_LINUX_DEFAULT="quiet"
- GRUB_CMDLINE_LINUX=""
- # Preload both GPT and MBR modules so that they are not missed
- GRUB_PRELOAD_MODULES="part_gpt part_msdos"
- # Uncomment to enable booting from LUKS encrypted devices
- GRUB_ENABLE_CRYPTODISK=y
- # Uncomment to enable Hidden Menu, and optionally hide the timeout count
- #GRUB_HIDDEN_TIMEOUT=5
- #GRUB_HIDDEN_TIMEOUT_QUIET=true
- # Uncomment to use basic console
- GRUB_TERMINAL_INPUT=console
- # Uncomment to disable graphical terminal
- #GRUB_TERMINAL_OUTPUT=console
- # The resolution used on graphical terminal
- # note that you can use only modes which your graphic card supports via VBE
- # you can see them in real GRUB with the command `vbeinfo'
- GRUB_GFXMODE=auto
- # Uncomment to allow the kernel use the same resolution used by grub
- GRUB_GFXPAYLOAD_LINUX=keep
- # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
- # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
- #GRUB_DISABLE_LINUX_UUID=true
- # Uncomment to disable generation of recovery mode menu entries
- GRUB_DISABLE_RECOVERY=true
- # Uncomment and set to the desired menu colors. Used by normal and wallpaper
- # modes only. Entries specified as foreground/background.
- #GRUB_COLOR_NORMAL="light-blue/black"
- #GRUB_COLOR_HIGHLIGHT="light-cyan/blue"
- # Uncomment one of them for the gfx desired, a image background or a gfxtheme
- #GRUB_BACKGROUND="/path/to/wallpaper"
- #GRUB_THEME="/path/to/gfxtheme"
- # Uncomment to get a beep at GRUB start
- #GRUB_INIT_TUNE="480 440 1"
- # Uncomment to make GRUB remember the last selection. This requires to
- # set 'GRUB_DEFAULT=saved' above.
- #GRUB_SAVEDEFAULT="true"
- # Encryption setup
- cryptdevice=UUID=362ce198-43cc-4f9a-8d37-09dc0cf0040f:cryptroot root=dev/mapper/cryptroot
Advertisement
Add Comment
Please, Sign In to add comment