Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- /ip route rule
- add action=lookup-only-in-table dst-address=10.192.100.1/32 src-address=\
- 10.62.100.2/32 table=out_ISP1
- 0 A S dst-address=0.0.0.0/0 gateway=10.62.100.1
- gateway-status=10.62.100.1 reachable via ether1 distance=1 scope=30
- target-scope=10 routing-mark=out_ISP1
- 7 A S dst-address=10.192.100.1/32 gateway=10.62.101.1
- gateway-status=10.62.101.1 reachable via ether4 distance=1 scope=30
- target-scope=10
- [admin@CE1] > ping 10.192.100.1 src-address=10.62.100.2
- SEQ HOST SIZE TTL TIME STATUS
- 0 10.192.100.1 56 63 2ms
- sent=1 received=1 packet-loss=0% min-rtt=2ms avg-rtt=2ms max-rtt=2ms
- [admin@CE1] > ping 10.192.100.1
- SEQ HOST SIZE TTL TIME STATUS
- 0 10.192.100.1 56 63 2ms
- 1 10.192.100.1 56 63 1ms
- sent=2 received=2 packet-loss=0% min-rtt=1ms avg-rtt=1ms max-rtt=2ms
- [admin@CE1] > ping 10.192.100.1 src-address=10.62.100.2
- SEQ HOST SIZE TTL TIME STATUS
- 0 10.192.100.1 56 63 2ms
- sent=1 received=1 packet-loss=0% min-rtt=2ms avg-rtt=2ms max-rtt=2ms
- [admin@CE2] > tool sniffer quick ip-protocol=icmp interface=ether4
- INT TIME NUM DI SRC-MAC DST-MAC VLAN SRC-ADDRESS DST-ADDRESS PROTOCOL SIZE
- eth 529.472 48 <- 50:00:00:0C:00:03 50:00:00:0B:00:03 10.62.101.2 10.192.100.1 ip:icmp 70
- eth 529.473 49 -> 50:00:00:0B:00:03 50:00:00:0C:00:03 10.192.100.1 10.62.101.2 ip:icmp 70
- [admin@CE2] > tool sniffer quick ip-protocol=icmp interface=ether1
- INT TIME NUM DI SRC-MAC DST-MAC VLAN SRC-ADDRESS DST-ADDRESS PROTOCOL SIZE
- eth 0.885 1 <- 50:00:00:0C:00:00 50:00:00:0B:00:00 10.62.100.2 10.192.100.1 ip:icmp 70
- eth 0.886 2 -> 50:00:00:0B:00:00 50:00:00:0C:00:00 10.192.100.1 10.62.100.2 ip:icmp 70
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
