API tools faq
paste
Naesstrom

1832_reset_boot

Naesstrom
Sep 29th, 2020
1,084
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.68 KB | None | 0 0
raw download clone embed print report
  1. U-Boot 2012.07 (btldr release 25) (Aug 19 2016 - 13:54:18)
  2.  
  3. This product contains some software licensed under the
  4. "GNU General Public License, version 2" provided with
  5. ABSOLUTELY NO WARRANTY under the terms of
  6. "GNU General Public License, version 2", available here:
  7. http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
  8.  
  9. DRAM: 1 GiB
  10. NAND (ONFI): Detected SPANSION S34MS02G2 [256 MiB]
  11. SF: Detected Macronix MX25U3235F [4 MiB]
  12. MFG data loaded
  13. Scanning shenv data blocks
  14. Total valid parts=4
  15. Active shenv part[0:1], write_counter=22
  16. PCI0 Link Intialized
  17. PCI1 Link Intialized
  18. Net:
  19. PHY ID = 0x4dd074, eth0 found AR8033 PHY
  20. PHY ID = 0x4dd074, eth1 found AR8033 PHY
  21. Valid I2C chip addresses: 51 52
  22. AP 1832/1852 detected...
  23. Power Type: 802.3af POE or Others detected...
  24.  
  25.  
  26. Button is pressed. Configuration reset activated..
  27. Keep the button pressed for > 20 seconds for full reset
  28.  
  29. Wait for the button to be released ....
  30. Button pressed for 22 seconds
  31.  
  32. Setting env for full reset..
  33. Writing to SPI Flash...
  34. Erasing block 0x1c8000
  35. Erasing at 0x1cf000 -- 100% complete.
  36. done
  37. Signature returns 0
  38. BL signing verification success, continue to run...
  39. Auto boot mode, use bootipq directly
  40. Hit ESC key to stop autoboot: 0
  41. Specified BOOT: part1
  42.  
  43. Booting from part1
  44.  
  45. Read 1024 bytes from volume part1 to 45000000
  46. Read 19416728 bytes from volume part1 to 45000000
  47. Signature returns 0
  48. Image signing verification success, continue to run...
  49. Using machid 0x1260 from environment
  50.  
  51. Starting image ...
  52.  
  53. [01/01/1970 00:00:00.0000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
  54. [01/01/1970 00:00:00.0000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  55. [01/01/1970 00:00:00.0000] Machine: Cisco Systems 11ac Wave2 Wifi Access Point
  56. [01/01/1970 00:00:00.0000] Memory policy: ECC disabled, Data cache writealloc
  57. [01/01/1970 00:00:00.0000] Kernel command line: ubi.mtd=0 crashkernel=30M@1280M console=ttyHSL1,9600n8 activepart=part1 activeboot=0 wdgtriggered=0
  58. [01/01/1970 00:00:00.1500] CPU1: Booted secondary processor
  59. [01/01/1970 00:00:10.8667] msm_serial_hs: probe of msm_serial_hs.0 failed with error -2
  60. [01/01/1970 00:00:11.5365] buginf tty flushing thread started, ttyport=ef411a90
  61. [01/01/1970 00:00:16.1751] msm_hsusb_host msm_hsusb_host: unable to find transceiver
  62. [01/01/1970 00:00:16.3050] watchdog: only one watchdog can use /dev/watchdog
  63. [01/01/1970 00:00:16.3750] watchdog: error registering /dev/watchdog (err=-16)
  64. [*01/01/1970 00:00:16.5550] buginf() enabled.
  65.  
  66. Welcome to Cisco.
  67.  
  68. Usage of this device is governed by Cisco's End User License Agreement,
  69. available at:
  70. http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.
  71.  
  72.  
  73. Restricted Rights Legend
  74.  
  75. Use, duplication, or disclosure by the Government is subject to
  76. restrictions as set forth in subparagraph (c) of the Commercial
  77. Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
  78. subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
  79. Software clause at DFARS sec. 252.227-7013.
  80.  
  81. Cisco Systems, Inc.
  82. 170 West Tasman Drive
  83. San Jose, California 95134-1706
  84.  
  85. This product contains cryptographic features and is subject to United
  86. States and local country laws governing import, export, transfer and
  87. use. Delivery of Cisco cryptographic products does not imply
  88. third-party authority to import, export, distribute or use encryption.
  89. Importers, exporters, distributors and users are responsible for
  90. compliance with U.S. and local country laws. By using this product you
  91. agree to comply with applicable laws and regulations. If you are unable
  92. to comply with U.S. and local laws, return this product immediately.
  93.  
  94. A summary of U.S. laws governing Cisco cryptographic products may be found at:
  95. http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
  96.  
  97. If you require further assistance please contact us by sending email to
  98. [email protected].
  99.  
  100.  
  101. This product contains some software licensed under the
  102. "GNU General Public License, version 2" provided with
  103. ABSOLUTELY NO WARRANTY under the terms of
  104. "GNU General Public License, version 2", available here:
  105. http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
  106.  
  107.  
  108. This product contains some software licensed under the
  109. "GNU Library General Public License, version 2" provided
  110. with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
  111. General Public License, version 2", available here:
  112. http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html
  113.  
  114.  
  115. This product contains some software licensed under the
  116. "GNU Lesser General Public License, version 2.1" provided
  117. with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
  118. General Public License, version 2.1", available here:
  119. http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
  120.  
  121.  
  122. This product contains some software licensed under the
  123. "GNU General Public License, version 3" provided with
  124. ABSOLUTELY NO WARRANTY under the terms of
  125. "GNU General Public License, Version 3", available here:
  126. http://www.gnu.org/licenses/gpl.html.
  127.  
  128. [*01/01/1970 00:00:16.5650] Made it into bootsh: Dec 5 2016 18:51:09
  129. [*01/01/1970 00:00:16.5650] bootsh build T-b437e13e36d7f9e45776ba1dd26ebfdf25d90348-gb437e13e-kalairam
  130. Factory full reset detected...
  131. Full Factory Reset triggered: clear all files from storage..
  132. init started: BusyBox v1.20.2 (2016-12-05 18:25:28 PST)
  133.  
  134.  
  135.  
  136. User Access Verification
  137. Username: [*01/01/1970 00:00:19.9239] Active version: 8.2.141.0
  138. [*01/01/1970 00:00:19.9239] Backup version: 8.3.112.0
  139. [*01/01/1970 00:00:20.0339] AP1852I
  140. [*01/01/1970 00:00:20.1238] nss_driver - Turbo Support 1
  141. [*01/01/1970 00:00:20.1338] Supported Frequencies - 110Mhz 550Mhz 733Mhz
  142. [*01/01/1970 00:00:20.2338]
  143. [*01/01/1970 00:00:20.2338] phy_value=0: org="0x1000" phy_reg="0x1800"
  144. [*01/01/1970 00:00:20.5737] Current value of FACTORY_RESET=0
  145. [*01/01/1970 00:00:20.5837] Last reload time: Aug 31 23:02:16 2019
  146. [*08/31/2019 23:02:16.0000] Setting system time Sat Aug 31 23:02:16 UTC 2019
  147. [*08/31/2019 23:02:16.0899] device wired0 entered promiscuous mode
  148. [*08/31/2019 23:02:16.1599] device wired1 entered promiscuous mode
  149. [*08/31/2019 23:02:16.1599]
  150. [*08/31/2019 23:02:16.1599] phy_value=0: org="0x1800" phy_reg="0x1800"
  151. [*08/31/2019 23:02:16.4898] stile_lm_ft_corsica: module license [08/31/2019 23:02:16.5098] stile module dp init successfully
  152. [08/31/2019 23:02:16.6098] NBAR Label:BLD_MCP_DEV_LATEST_20150424_123021 NBAR VERSION:module build date: Nov 4 2015 at 14:26:22
  153. 'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
  154. [*08/31/2019 23:02:16.5098] stile_lm_dp_corsica: module license 'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
  155. [*08/31/2019 23:02:17.1496]
  156. [*08/31/2019 23:02:17.1596] boot 1 build T-b437e13e36d7f9e45776ba1dd26ebfdf25d90348-gb437e13e-kalairam board corsica mac C4:B9:CD:EE:25:30
  157. [*08/31/2019 23:02:17.1596] Module: aptrace .text=0xbf000000 data=0xbf0069c0 bss=0xbf006cf8
  158. [*08/31/2019 23:02:17.1596] Module: qca_nss_gmac .text=0xbf00f000 data=0xbf015af8 bss=0xbf015fb8
  159. [*08/31/2019 23:02:17.1596] Module: qca_nss_drv .text=0xbf01f000 data=0xbf0367b0 bss=0xbf037560
  160. [*08/31/2019 23:02:17.1596] Module: qca_nss_capwapmgr .text=0xbf053000 data=0xbf056b6c bss=0xbf056cc0
  161. [*08/31/2019 23:02:17.1596] Module: nssmgrctl .text=0xbf05c000 data=0xbf05d728 bss=0xbf05da4c
  162. [*08/31/2019 23:02:17.1596] Module: proclikefs .text=0xbf063000 data= bss=0xbf063b40
  163. [*08/31/2019 23:02:17.1596] Module: stile_lm_ft .text= data= bss=
  164. [*08/31/2019 23:02:17.1596] Module: stile_lm_dp .text= data= bss=
  165. [*08/31/2019 23:02:17.1596] Module: qca_nss_profile_drv .text=0xbf8ce000 data=0xbf8cf324 bss=0xbf8cf498
  166. [*08/31/2019 23:02:17.5295] Last reload reason : 0: unknown
  167. [*08/31/2019 23:02:18.7491] adf: module license 'Proprietary' taints kernel.
  168. [*08/31/2019 23:02:18.7591] asf: module license 'Proprietary' taints kernel.
  169. [*08/31/2019 23:02:18.7591] ath_hal: module license 'Proprietary' taints kernel.
  170. [*08/31/2019 23:02:18.7691] ath_dfs: module license 'Proprietary' taints kernel.
  171. [*08/31/2019 23:02:18.7691] ath_rate_atheros: module license 'Proprietary' taints kernel.
  172. [*08/31/2019 23:02:18.7791] ath_dev: module license 'Proprietary' taints kernel.
  173. [*08/31/2019 23:02:18.8091]
  174. [*08/31/2019 23:02:18.8091] __ol_ath_attach() Allocated scn c3b00480
  175. [*08/31/2019 23:02:18.8191] Chip id: 0x9, chip version: 0x1000000
  176. [*08/31/2019 23:02:18.8191]
  177. [*08/31/2019 23:02:18.8191] Target Version is 1000000
  178. [*08/31/2019 23:02:18.8191]
  179. [*08/31/2019 23:02:18.8191] Flash Download Address c0000
  180. [*08/31/2019 23:02:18.8191] ol_transfer_bin_file: flash data file defined
  181. [*08/31/2019 23:02:18.8191] Cal location [0]: 00000000
  182. [*08/31/2019 23:02:18.8191]
  183. [*08/31/2019 23:02:18.8191] Wifi0 NAND FLASH Select OFFSET 0x1000
  184. [*08/31/2019 23:02:18.8391] qc98xx_verify_checksum: flash checksum passed: 0x9daf
  185. [*08/31/2019 23:02:18.8391] ol_transfer_bin_file 4017: Download Flash data len 12064
  186. [*08/31/2019 23:02:18.8591]
  187. [*08/31/2019 23:02:18.8591] Board data initialized
  188. [*08/31/2019 23:02:18.9091] ol_ath_download_firmware :First OTP download and Execute is good address:0xa000 return param 4660
  189. [*08/31/2019 23:02:18.9091] ol_ath_download_firmware:##Board Id 8 , CHIP Id 1
  190. [*08/31/2019 23:02:18.9091] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin
  191. [*08/31/2019 23:02:18.9791]
  192. [*08/31/2019 23:02:18.9791] [Flash] : Ignore Module param
  193. [*08/31/2019 23:02:18.9891] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  194. [*08/31/2019 23:02:19.0091] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
  195. [*08/31/2019 23:02:20.1087] Startup Mode-0 set
  196. [*08/31/2019 23:02:20.1087] HTC Service:0x0300 ep:1 TX flow control disabled
  197. [*08/31/2019 23:02:20.1087] HTC Service:0x0100 ep:2 TX flow control disabled
  198. [*08/31/2019 23:02:20.1087] Firmware_Build_Number:84
  199. [*08/31/2019 23:02:20.1087] host/RAM_fw Build Ver Mismatch: H:0x47, F:0x54 !
  200. [*08/31/2019 23:02:20.1087] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
  201. [*08/31/2019 23:02:20.1087]
  202. [*08/31/2019 23:02:20.1087] RES CFG Support wmi_service_bitmap 9778
  203. [*08/31/2019 23:02:20.1087]
  204. [*08/31/2019 23:02:20.1087] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 10 to TGT
  205. [*08/31/2019 23:02:20.1087] Mesh Supported
  206. [*08/31/2019 23:02:20.1787] wmi_ready_event_rx: WMI UNIFIED READY event
  207. [*08/31/2019 23:02:20.1887] ACS not enabled
  208. [*08/31/2019 23:02:20.1887] ol_ath_thermal_mitigation_attach: --
  209. [*08/31/2019 23:02:20.1887]
  210. [*08/31/2019 23:02:20.1887] __ol_ath_attach() Allocated scn ee4c0480
  211. [*08/31/2019 23:02:20.1987] Chip id: 0x9, chip version: 0x1000000
  212. [*08/31/2019 23:02:20.1987]
  213. [*08/31/2019 23:02:20.1987] Target Version is 1000000
  214. [*08/31/2019 23:02:20.1987]
  215. [*08/31/2019 23:02:20.1987] Flash Download Address c0000
  216. [*08/31/2019 23:02:20.1987] ol_transfer_bin_file: flash data file defined
  217. [*08/31/2019 23:02:20.2087] Cal location [1]: 00004000
  218. [*08/31/2019 23:02:20.2087]
  219. [*08/31/2019 23:02:20.2087] wifi1 NAND FLASH Select OFFSET 0x5000
  220. [*08/31/2019 23:02:20.2287] qc98xx_verify_checksum: flash checksum passed: 0xe0d8
  221. [*08/31/2019 23:02:20.2287] ol_transfer_bin_file 4017: Download Flash data len 12064
  222. [*08/31/2019 23:02:20.2487]
  223. [*08/31/2019 23:02:20.2487] Board data initialized
  224. [*08/31/2019 23:02:20.2887] ol_ath_download_firmware :First OTP download and Execute is good address:0x9c00 return param 4660
  225. [*08/31/2019 23:02:20.2887] ol_ath_download_firmware:##Board Id 7 , CHIP Id 1
  226. [*08/31/2019 23:02:20.2887] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS239_negative_pwr_offset_5G_v2_007.bin
  227. [*08/31/2019 23:02:20.3586]
  228. [*08/31/2019 23:02:20.3586] [Flash] : Ignore Module param
  229. [*08/31/2019 23:02:20.3686] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
  230. [*08/31/2019 23:02:20.3886] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
  231. [*08/31/2019 23:02:21.1084] FWLOG: [25149] WAL_DBGID_TX_AC_BUFFER_SET ( 0x3, 0x1e, 0x94c, 0x94c, 0x0 )
  232. [*08/31/2019 23:02:21.1084] FWLOG: [25149] WAL_DBGID_TX_AC_BUFFER_SET ( 0x12, 0x1e, 0x94c, 0x94c, 0x0 )
  233. [*08/31/2019 23:02:21.1084] FWLOG: [25149] WAL_DBGID_TX_AC_BUFFER_SET ( 0x45, 0x1e, 0x94c, 0x94c, 0x0 )
  234. [*08/31/2019 23:02:21.1084] FWLOG: [25149] WAL_DBGID_TX_AC_BUFFER_SET ( 0x67, 0x1e, 0x94c, 0x94c, 0x0 )
  235. [*08/31/2019 23:02:21.4883] Startup Mode-0 set
  236. [*08/31/2019 23:02:21.4883] HTC Service:0x0300 ep:1 TX flow control disabled
  237. [*08/31/2019 23:02:21.4883] HTC Service:0x0100 ep:2 TX flow control disabled
  238. [*08/31/2019 23:02:21.4883] Firmware_Build_Number:84
  239. [*08/31/2019 23:02:21.4883] host/RAM_fw Build Ver Mismatch: H:0x47, F:0x54 !
  240. [*08/31/2019 23:02:21.4883] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339b79b2 vht_supp_mcs:0x0000ffea
  241. [*08/31/2019 23:02:21.4883]
  242. [*08/31/2019 23:02:21.4883] RES CFG Support wmi_service_bitmap 9778
  243. [*08/31/2019 23:02:21.4883]
  244. [*08/31/2019 23:02:21.4883] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitmap as 10 to TGT
  245. [*08/31/2019 23:02:21.4883] Mesh Supported
  246. [*08/31/2019 23:02:23.6876] pid 1430's current affinity mask: 3
  247. [*08/31/2019 23:02:23.6876] pid 1430's new affinity mask: 1
  248. [08/31/2019 23:02:31.4952] L2 Error detected!
  249. [08/31/2019 23:02:31.4952] L2ESR = 0x00010001
  250. [08/31/2019 23:02:31.4952] L2ESYNR0 = 0x40002190
  251. [08/31/2019 23:02:31.4952] L2ESYNR1 = 0x00018405
  252. [08/31/2019 23:02:31.4952] L2EAR0 = 0xc40605e9
  253. [08/31/2019 23:02:31.4952] L2EAR1 = 0x00000000
  254. [08/31/2019 23:02:31.4952] CPU bitmap = 0x1
  255.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!