Advertisement
ScottHelme

EE BrightBox - Boot Log

Jan 13th, 2014
711
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. HELO
  2. CPUI
  3. L1CI
  4. DRAM
  5. ----
  6. PHYS
  7. ZQDN
  8. PHYE
  9. DINT
  10. LSYN
  11. USYN
  12. MSYN
  13. LMBE
  14. PASS
  15. ----
  16. ZBSS
  17. CODE
  18. DATA
  19. L12F
  20. ROMM
  21. ====
  22. HELO
  23. ZBSS
  24. RAMM
  25. ====
  26. Copyright (C) 2012 Arcadyan Technology.
  27.  
  28. SPIFLASH:
  29. JEDEC ID: 0xc22017, size: 8192KB
  30. block: 64KB(64), sector: 4KB(1024)
  31.  
  32. NVRAM(0) MAGIC checking passed!
  33. NVRAM(0) CRC checking passed!
  34. total 5 of NVRAM(0) entries loaded
  35.  
  36. NVRAM(1) MAGIC checking passed!
  37. NVRAM(1) CRC checking passed!
  38. total 7 of NVRAM(1) entries loaded
  39.  
  40. BOOTLOADER version 1.0.10 for BrightBox
  41. Build Date: Fri Sep 21 03:00:26 2012 (brian_chang@buildbed)
  42.  
  43. Chip ID: BCM6328B0, MIPS: 320MHz, DDR: 320MHz, Bus: 160MHz
  44. Memory Test Passed!
  45. Total Memory: 67108864 bytes (64MB)
  46. HW Version: 01
  47. Board IP address 192.168.1.1
  48. Board IP netmask 255.255.255.0
  49. Gateway IP address 0.0.0.0
  50. Server IP address 192.168.1.99
  51. Boot image (1 or 2) 1
  52. MAC address number 1
  53. MAC address base 88-03-55-19-7F-EB
  54. *** Press any key to stop auto run (3 seconds) ***
  55. Auto run second count down: 0
  56. Loading primary image ...
  57. Finished loading 8257536 bytes
  58. DATE : Fri Sep 21 03:00:26 2012
  59. VER : v0.09.94.0006
  60. CRC : CA7C2EC6
  61. Code Address: 0x80002000, Entry Address: 0x801d8550
  62. Decompression OK!
  63. Entry at 0x801d8550
  64. Starting program at 0x801d8550
  65. Linux version 2.6.30 (brian_chang@buildbed) (gcc version 4.1.2) #1 Fri Sep 21 02:51:02 CST 2012
  66. Detected Broadcom 0x6328 CPU revision 10b0
  67. CPU frequency is 320 MHz
  68. 64MB of RAM installed
  69. registering 32 GPIOs
  70. console [early0] enabled
  71. CPU revision is: 0002a075 (Broadcom BCM63281)
  72. board_bcm9632x: board name: AR7516AAW
  73. Determined physical RAM map:
  74. memory: 03f00000 @ 00000000 (usable)
  75. Zone PFN ranges:
  76. DMA 0x00000000 -> 0x00001000
  77. Normal 0x00001000 -> 0x00003f00
  78. Movable zone start PFN for each node
  79. early_node_map[1] active PFN ranges
  80. 0: 0x00000000 -> 0x00003f00
  81. On node 0 totalpages: 16128
  82. free_area_init_node: node 0, pgdat 8024bb30, node_mem_map 81000000
  83. DMA zone: 32 pages used for memmap
  84. DMA zone: 0 pages reserved
  85. DMA zone: 4064 pages, LIFO batch:0
  86. Normal zone: 94 pages used for memmap
  87. Normal zone: 11938 pages, LIFO batch:1
  88. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16002
  89. Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 ro rootfstype=squashfs
  90. wait instruction: enabled
  91. Primary instruction cache 32kB, VIPT, 4-way, linesize 16 bytes.
  92. Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  93. NR_IRQS:80
  94. PID hash table entries: 256 (order: 8, 1024 bytes)
  95. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  96. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  97. Memory: 61368k/64512k available (1912k kernel code, 3124k reserved, 436k data, 120k init, 0k highmem)
  98. Calibrating delay loop... 318.46 BogoMIPS (lpj=159232)
  99. Mount-cache hash table entries: 512
  100. --Kernel Config--
  101. SMP=0
  102. PREEMPT=0
  103. DEBUG_SPINLOCK=0
  104. DEBUG_MUTEXES=0
  105. net_namespace: 536 bytes
  106. /proc/net/netfilter/nf_cli_bw_mon created
  107. NET: Registered protocol family 16
  108. registering PCI controller with io_map_base unset
  109. bio: create slab <bio-0> at 0
  110. pci 0000:00:00.0: PME# supported from D0 D3hot
  111. pci 0000:00:00.0: PME# disabled
  112. pci 0000:01:00.0: reg 10 64bit mmio: [0x000000-0x003fff]
  113. pci 0000:01:00.0: supports D1 D2
  114. pci 0000:00:00.0: PCI bridge, secondary bus 0000:01
  115. pci 0000:00:00.0: IO window: disabled
  116. pci 0000:00:00.0: MEM window: 0x10f00000-0x10ffffff
  117. pci 0000:00:00.0: PREFETCH window: disabled
  118. PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  119. PCI: Setting latency timer of device 0000:00:00.0 to 64
  120. BLOG v3.0 Initialized
  121. BLOG Rule v1.0 Initialized
  122. Broadcom IQoS v0.1 Sep 21 2012 02:49:54 initialized
  123. NET: Registered protocol family 8
  124. NET: Registered protocol family 20
  125. NET: Registered protocol family 2
  126. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  127. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  128. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  129. TCP: Hash tables configured (established 2048 bind 2048)
  130. TCP reno registered
  131. NET: Registered protocol family 1
  132. Total # RxBds=848
  133. bcmPktDmaBds_init: Broadcom Packet DMA BDs initialized
  134.  
  135. squashfs: version 4.0 (2009/01/31) Phillip Lougher
  136. msgmni has been set to 119
  137. io scheduler noop registered (default)
  138. PCI: Setting latency timer of device 0000:00:00.0 to 64
  139. aer 0000:00:00.0:pcie02: service driver aer loaded
  140. bcm632x-uart.0: ttyS0 at MMIO 0xb0000100 (irq = 36) is a bcm632x-uart
  141. console handover: boot [early0] -> real [ttyS0]
  142. loop: module loaded
  143. PPP generic driver version 2.4.2
  144. NET: Registered protocol family 24
  145. PPPoL2TP kernel driver, V1.0
  146. m25p80 spi0.0: mx25l6405d (8192 Kbytes)
  147. Creating 6 MTD partitions on "spi0.0":
  148. 0x00000000e000-0x00000000f000 : "manuf"
  149. 0x00000000f000-0x000000010000 : "nvram"
  150. 0x000000110000-0x0000007f0000 : "rootfs"
  151. 0x000000010000-0x0000007f0000 : "priimg"
  152. 0x0000007f0000-0x000000800000 : "pricfg"
  153. 0x000000000000-0x00000000e000 : "bootldr"
  154. bcm632x-hsspi bcm632x-hsspi.0: at 0xb0001000 (irq 37, FIFOs size 510) v1.0
  155. Registered led device: dsl:sync
  156. Registered led device: dsl:data
  157. Registered led device: wps:green
  158. Registered led device: sys:a
  159. Registered led device: sys:b
  160. Registered led device: sys:c
  161. Registered led device: sys:d
  162. GACT probability on
  163. u32 classifier
  164. Actions configured
  165. TCP cubic registered
  166. NET: Registered protocol family 17
  167. Bridge firewalling registered
  168. Initializing MCPD Module
  169. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  170. All bugs added by David S. Miller <davem@redhat.com>
  171. VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  172. Freeing unused kernel memory: 120k freed
  173. gpio-buttons driver version 0.1.2
  174. input: gpio-buttons as /devices/platform/gpio-buttons/input/input0
  175. Button Hotplug driver version 0.4.1
  176. arc_oshal: module license 'Propritary' taints kernel.
  177. Disabling lock debugging due to kernel taint
  178.  
  179. oshal_init(1066) DRV: Created Successfully
  180.  
  181. ARC_KERNEL_OSIX_init(396) DRV: Created Successfully
  182. Broadcom Logger v0.1 Sep 21 2012 02:51:21
  183. Initialized fcache state
  184. Broadcom Packet Flow Cache Char Driver v2.2 Sep 21 2012 02:51:23 Registered<242>
  185. Created Proc FS /procfs/fcache
  186. Broadcom Packet Flow Cache registered with netdev chain
  187. Broadcom Packet Flow Cache learning via BLOG enabled.
  188. Constructed Broadcom Packet Flow Cache v2.2 Sep 21 2012 02:51:23
  189. Broadcom BCM6328B0 Ethernet Network Device v0.1 Sep 21 2012 02:51:25
  190. ETH Init: Ch:0 - 180 tx BDs at 0xa3946000
  191. ETH Init: Ch:0 - 400 rx BDs at 0xa3a21000
  192. bcm632x-dg: register bcmsw
  193. eth0: MAC Address: 88:03:55:19:7F:EB
  194. eth1: MAC Address: 88:03:55:19:7F:EB
  195. eth2: MAC Address: 88:03:55:19:7F:EB
  196. eth3: MAC Address: 88:03:55:19:7F:EB
  197. Broadcom 802.1Q VLAN Interface, v0.1
  198. bcmxtmrt: Broadcom BCM6328B0 ATM/PTM Network Device v0.4 Sep 21 2012 02:51:33
  199. bcmxtmcfg: bcmxtmcfg_init entry
  200. adsl: adsl_init entry
  201. Broadcom Power Management v0.1 Sep 21 2012 02:52:42
  202. Broadcom WLAN configuration service start
  203. PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
  204. PCI: Setting latency timer of device 0000:01:00.0 to 64
  205. wl: passivemode=1
  206. wl: napimode=0
  207. wl: allocskbmode=1
  208. wl:force using embedded data
  209. wlc_bmac_attach(2582): BpGetWirelessFlags NIY!
  210. wl0: Broadcom BCMa8dc 802.11 Wireless Controller 5.100.96.0.cpe4.10L01a.8
  211. bcm632x-dg: register wl0
  212. ip_tables: (C) 2000-2006 Netfilter Core Team
  213. Netfilter messages via NETLINK v0.30.
  214. nf_conntrack version 0.5.0 (1008 buckets, 4032 max)
  215. ctnetlink v0.93: registering with nfnetlink.
  216. xt_time: kernel timezone is -0000
  217. IMQ driver loaded successfully.
  218. Hooking IMQ after NAT on PREROUTING.
  219. Hooking IMQ before NAT on POSTROUTING.
  220.  
  221. Osix_service_sys_cmd_thread_main[1302]: Osix Wait for Batch System Comand Processing...
  222. Osix Thread service system command started successfully !
  223. ramdisk/etc/config/
  224. ramdisk/etc/config/glbcfg.save
  225. MHDL_DB_WLAN_Init_Setting[118]
  226. MHDL_DB_LAN_Init_Setting[525]
  227. Password for 'admin' changed
  228. BcmAdsl_Initialize=0xC0404EF8, g_pFnNotifyCallback=0xC04BA8D4
  229. BcmAdsl_Initialize(202): BpGetRj11InnerOuterPairGpios NIY
  230. pSdramPHY=0xA3FFFFF8, 0xD1AF908B 0xD183938B
  231. *** PhySdramSize got adjusted: 0x82CDC => 0x98878 ***
  232. AdslCoreSharedMemInit: shareMemAvailable=423776
  233. AdslCoreHwReset: pLocSbSta=83120000 bkupThreshold=1600
  234. AdslCoreHwReset: AdslOemDataAddr = 0xA3F77D28
  235. EXECUTE "/bin/util_xdsl_cli mode auto"
  236. BcmAdsl_Initialize=0xC0404EF8, g_pFnNotifyCallback=0xC04BA8D4
  237. EXECUTE "/bin/util_xdsl_cli bitswap enable"
  238. BcmAdsl_Initialize=0xC0404EF8, g_pFnNotifyCallback=0xC04BA8D4
  239. EXECUTE "/bin/util_xdsl_cli sra enable"
  240. BcmAdsl_Initialize=0xC0404EF8, g_pFnNotifyCallback=0xC04BA8D4
  241. devCtl_xtmInitiaXTM Init: Ch:0 - 400 rx BDs at 0xa3bc5000
  242. lize(174): devCtXTM Init: Ch:1 - 16 rx BDs at 0xa29b0780
  243. l_getSdramSize NIY!
  244. WAN Type is ADSL
  245. Success
  246. Success
  247. Success
  248. Success
  249. Success
  250. Success
  251. Power ON stage, no need to delete interface in advance.
  252. ioctl failed. check if wl0.1 exists
  253. MHDL_DB_SYS_DNS_UPDATE_RESOLV_CONF[1046]: cmd_buf (cp /tmp/tmpResolv_536.conf /etc/resolv.conf)
  254. dhcp IP compare: old () vs new (192.168.69.69).
  255. dhcp lease time compare: old (00000000) vs new (0002A300).
  256. mhdl_dn_lan_dhcpd_cfg_file_init[169]: Check_IP_Changed : (TRUE). Lease_Time_Changed (TRUE)
  257. dhcp IP compare: old () vs new (192.168.2.1).
  258. dhcp lease time compare: old (00000000) vs new (0000A8C0).
  259. mhdl_dn_lan_dhcpd_cfg_file_init[169]: Check_IP_Changed : (TRUE). Lease_Time_Changed (TRUE)
  260. Restart Level is BR0_IPCHANGED
  261. BR0 IP Changed
  262. dhcp IP compare: old () vs new (192.168.3.1).
  263. dhcp lease time compare: old (00000000) vs new (0000A8C0).
  264. mhdl_dn_lan_dhcpd_cfg_file_init[169]: Check_IP_Changed : (TRUE). Lease_Time_Changed (TRUE)
  265. ioctl failed. check if wl0.1 exists
  266. Initializing WAN
  267. XTM driver returns Not Found Error
  268.  
  269. bcmxtmrt: MAC address: 88 03 55 19 7f ed
  270. [DoCreateDeviceReq.2998]: register_netdev
  271. [DoCreateDeviceReq.3000]: register_netdev done
  272. /bin/bcm_atmctl operate conn --add 1.0.38 aal5 vcmux_pppoa 1MHDL_DB_SYS_STOP_UPNPD[1322]: cmd (killall arc_upnp)
  273. killall: arc_upnp: no process killed
  274. MHDL_DB_SYS_RESTART_UPNPD[1306]: cmd_buf: /usr/sbin/arc_upnp &
  275. Success
  276. Success
  277. Success
  278. Success
  279. Success
  280. ioctl failed. check if wl0.1 exists
  281. modprobe: can't open 'modules.dep': No such file or directory
  282. The kernel doesn't support the ebtables 'nat' table.
  283. iptables v1.4.8: Couldn't find target `QOSUP'
  284.  
  285. Try `iptables -h' or 'iptables --help' for more information.
  286. ioctl failed. check if wl0.1 exists
  287. iptables v1.4.8: Couldn't find target `QOSUP'
  288.  
  289. Try `iptables -h' or 'iptables --help' for more information.
  290. net.netfilter.nf_conntrack_acct = 1
  291. ioctl failed. check if wl0.1 exists
  292. RTNETLINK answers: Invalid argument
  293. Pre-init before any Application was started.
  294. killall: dyndns: no process killed
  295. killall: tzoupdate: no process killed
  296. start httpd
  297. CLOCK_MONOTONIC, resolution=0.999848
  298. System clock_res=999848, clock_hz=1000
  299. config_httpd(517) LAN IP Address (192.168.69.69)
  300. config_httpd(526) LAN IP Mask (255.255.255.0)
  301. httpd: after config_httpd()
  302. httpd: listen at 192.168.69.69:5438
  303. [HTTPD] httpd_main(): Not the 1st httpd_main task
  304. Success
  305. Success
  306. SSDP_SetRCVSocket(217): Recv SsdpSock 14
  307. Success
  308. Success
  309. QueryEthernetLinkStatus[115]: WAN Interface Name (NULL)
  310. Port Number: eth3, PortStatus: 0
  311. Success
  312. 1 Jan 00:00:26 sntp[966]: kod_init_kod_db(): Cannot open KoD db file /var/db/ntp-kod
  313. 1 Jan 00:00:26 sntp[966]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  314. Unable to resolve hostname(s)
  315. ioctl failed. check if wl0.1 exists
  316. killall: bcm_mcpd: no process killed
  317. HTTPD: main(1480)
  318. lease_init[65]: /etc/udhcpd/udhcpd_001.leases !
  319. main(1572): I am child for HTTPD SVR 2
  320. main(1584): Start HTTPD SVR 0
  321. Restart Level is BR1_IPCHANGED
  322. BR1 IP Changed
  323. killall: bcm_mcpd: no process killed
  324. ioctl failed. check if wl0.1 exists
  325. lease_init[65]: /etc/udhcpd/udhcpd_002.leases !
  326. Restart Level is BR2_IPCHANGED
  327. BR2 IP Changed
  328. please assign value for wl0.1_ssid
  329. please assign value for wl0.2_ssid
  330. killall: bcm_mcpd: no process killed
  331. ioctl failed. check if wl0.1 exists
  332. ioctl failed. check if wl0.1 exists
  333. ioctl failed. check if wl0.1 exists
  334. ioctl failed. check if wl0.1 exists
  335. ioctl failed. check if wl0.1 exists
  336. rmmod: can't unload 'nf_nat_pt': unknown symbol in module, or unknown parameter
  337. killall: urlfilterd: no process killed
  338. ioctl failed. check if wl0.1 exists
  339. ioctl failed. check if wl0.1 exists
  340. ioctl failed. check if wl0.1 exists
  341. conntrack v1.0.0 (conntrack-tools): connection tracking table has been emptied.
  342. conntrack v1.0.0 (conntrack-tools): expectation table has been emptied.
  343. please assign value for wps_aplockdown_count
  344. ioctl failed. check if wl0.1 exists
  345. ioctl failed. check if wl0.1 exists
  346. please assign value for wl0_radius_key
  347. please assign value for wl0_nas_id
  348. 1 Jan 00:00:50 sntp[2721]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  349. Unable to resolve hostname(s)
  350. please assign value for wl0.1_wpa_psk
  351. please assign value for wl0.2_wpa_psk
  352. ioctl failed. check if wl0.1 exists
  353. start WLAN manager
  354. WLmngr Daemon is running
  355. ifconfig: wl0.1: error fetching interface information: Device not found
  356. ifconfig: wl0.2: error fetching interface information: Device not found
  357. wlevt_init@157: opened loopback socket 6
  358. wlevt is ready for new msg...
  359. nvram_commit NIY!
  360. ifconfig: wl0.1: error fetching interface information: Device not found
  361. ifconfig: wl0.2: error fetching interface information: Device not found
  362. ioctl failed. check if wl0.1 exists
  363. >>>>>Start Auto Channel search !!! >>>>>
  364. Setting SSID: "EE-BrightBox-7s6r9p"
  365. Setting SSID: "ar7516aaw-guest"
  366. Setting SSID: "ar7516aaw-guest2"
  367. chanspec 0x2b0b selected
  368. bcm_wlctl: Unsupported
  369. bcm_wlctl: Not Permitted
  370. bcm_wlctl: Undefined error
  371. nvram_commit NIY!
  372. LLTD daemon is ready to run
  373. EAP daemon is ready to run
  374. NAS daemon is ready to run
  375. wlmngr_startWsc(1127): wait for WPSUI message timeout!
  376. dalQos_setDefaultWlQueuesLock NIY!
  377. dalQos_setDefaultWlQueuesLock NIY!
  378. dalQos_setDefaultWlQueuesLock NIY!
  379. read/write to TR69 configuration NIY!
  380. Starting to init bandwidth contrl of wifi!!
  381. /sbin/tctrl qdisc del dev wl0 ingress 2>/dev/null
  382. /usr/sbin/ebtables -X wl0_egress 2>/dev/null
  383. iptables: No chain/target/match by that name.
  384. /sbin/tctrl qdisc del dev wl0 root 2>/dev/null
  385. /usr/sbin/ebtables -X wl0_ingress 2>/dev/null
  386. /sbin/tctrl qdisc del dev wl0.1 ingress 2>/dev/null
  387. /usr/sbin/ebtables -X wl0.1_egress 2>/dev/null
  388. /sbin/tctrl qdisc del dev wl0.1 root 2>/dev/null
  389. /usr/sbin/ebtables -X wl0.1_ingress 2>/dev/null
  390. /sbin/tctrl qdisc del dev wl0.2 ingress 2>/dev/null
  391. /usr/sbin/ebtables -X wl0.2_egress 2>/dev/null
  392. /sbin/tctrl qdisc del dev wl0.2 root 2>/dev/null
  393. /usr/sbin/ebtables -X wl0.2_ingress 2>/dev/null
  394. start mcpd
  395. start USB service
  396. Password for 'user' changed
  397. 1 Jan 00:01:14 sntp[3549]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  398. Unable to resolve hostname(s)
  399. bcm632x-usb-ohci bcm632x-usb-ohci.0: init err (c8300000 0000)
  400. bcm632x-usb-ohci bcm632x-usb-ohci.0: startup error -79
  401. bcm632x-usb-ohci: probe of bcm632x-usb-ohci.0 failed with error -79
  402. action name is add
  403. product name is 1d6b/2/206
  404. Driver 'sd' needs updating - please use bus_type methods
  405. start UMTS service
  406. action name is add
  407. product name is 1d6b/2/206
  408. start Power-Management service
  409. Host MIPS Clock divider pwrsaving is enabled
  410. DDR Self Refresh pwrsaving is enabled
  411. System Start with Normal Phase
  412. 1 Jan 00:01:42 sntp[3699]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  413. Unable to resolve hostname(s)
  414. 1 Jan 00:02:06 sntp[3741]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  415. Unable to resolve hostname(s)
  416. 1 Jan 00:02:30 sntp[3794]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  417. Unable to resolve hostname(s)
  418. 1 Jan 00:02:55 sntp[3836]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  419. Unable to resolve hostname(s)
  420. 1 Jan 00:03:19 sntp[3878]: Error looking up (A) ntp.readytoconnect.co.uk: Name or service not known
  421. Unable to resolve hostname(s)
Advertisement
RAW Paste Data Copied
Advertisement