Advertisement
dgnd3700v1

evg2000 openwrt attempt #1 (switch not detected)

Sep 3rd, 2013
174
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 52.35 KB | None | 0 0
  1. PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  2. PCI: Setting latency timer of device 0000:00:01.0 to 64
  3. wl: srom not detected, using main memory mapped srom info (wombo board)
  4. wl0: wlc_attach: MAC addr from system pool. id:0x776c0000
  5. wl0: MAC Address: 20:4E:7F:1D:27:A1
  6. wl0: Broadcom BCM4322 802.11 Wireless Controller 5.10.120.0.cpe4.402.0
  7. dgasp: kerSysRegisterDyingGaspHandler: wl0 registered
  8. DSP Driver: DSP init stub
  9. Endpoint: endpoint_init entry
  10. BOS: Enter bosInit
  11. Enter bosAppInit
  12. Exit bosAppInit
  13. BOS: Exit bosInit
  14. Endpoint: endpoint_init COMPLETED
  15. eth0 Link UP 100 mbps full duplex
  16. Set eth0 wan port 1Set eth0 wan port 1<2>eth3 Link UP 1000 mbps full duplex
  17.  
  18.  
  19. Auto-negotiation enabled.
  20. Link is down
  21.  
  22.  
  23.  
  24.  
  25. EVG2000 Boot Code V1.0.6
  26. CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
  27. Build Date: Fri Sep 25 11:21:49 CST 2009 (eric@dev3)
  28. Copyright (C) 2000-2008 Broadcom Corporation.
  29.  
  30. Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
  31. CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
  32. CPU running TP0
  33. Total memory: 33554432 bytes (32MB)
  34. Boot Address 0xb8000000
  35.  
  36.  
  37. Board IP address : 192.168.1.1:ffffff00
  38. Host IP address : 192.168.1.100
  39. Gateway IP address :
  40. Run from flash/host (f/h) : f
  41. Default host run file name : vmlinux
  42. Default host flash file name : bcm963xx_fs_kernel
  43. Boot delay (0-9 seconds) : 1
  44. Board Id (0-4) : 96369PVG
  45. Number of MAC Addresses (1-32) : 11
  46. Base MAC Address : 20:4e:7f:1d:27:a0
  47. PSI Size (1-64) KBytes : 24
  48. Main Thread Number [0|1] : 0
  49.  
  50. *** Press any key to stop auto run (1 seconds) ***
  51. Auto run second count down: 1
  52. web info: Waiting for connection on socket 0.
  53. CFE>
  54. CFE>
  55. CFE>
  56. CFE>
  57. CFE>
  58. CFE>
  59. CFE>
  60. CFE>
  61. CFE>
  62. CFE>
  63. CFE> reset
  64.  
  65. Resetting board...
  66.  
  67. EVG2000 Boot Code V1.0.6
  68. CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
  69. Build Date: Fri Sep 25 11:21:49 CST 2009 (eric@dev3)
  70. Copyright (C) 2000-2008 Broadcom Corporation.
  71.  
  72. Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
  73. CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
  74. CPU running TP0
  75. Total memory: 33554432 bytes (32MB)
  76. Boot Address 0xb8000000
  77.  
  78.  
  79. Board IP address : 192.168.1.1:ffffff00
  80. Host IP address : 192.168.1.100
  81. Gateway IP address :
  82. Run from flash/host (f/h) : f
  83. Default host run file name : vmlinux
  84. Default host flash file name : bcm963xx_fs_kernel
  85. Boot delay (0-9 seconds) : 1
  86. Board Id (0-4) : 96369PVG
  87. Number of MAC Addresses (1-32) : 11
  88. Base MAC Address : 20:4e:7f:1d:27:a0
  89. PSI Size (1-64) KBytes : 24
  90. Main Thread Number [0|1] : 0
  91.  
  92. *** Press any key to stop auto run (1 seconds) ***
  93. Auto run second count down: 1
  94. web info: Waiting for connection on socket 0.
  95. CFE>
  96. CFE>
  97. CFE>
  98. CFE>
  99. CFE>
  100. CFE>
  101. web info: Waiting for connection on socket 1.
  102. web info: Waiting for connection on socket 0.
  103. web info: Waiting for connection on socket 1.
  104. web info: Waiting for connection on socket 0.
  105. web info: Upload 8388864 bytes, Broadcom image format.
  106. CFE>
  107. Flashing root file system and kernel at 0xb8020000: .................................................................
  108.  
  109. .
  110. *** Image flash done *** !
  111.  
  112. Resetting board...
  113.  
  114. EVG2000 Boot Code V1.0.6
  115. CFE version 1.0.37-102.6 for BCM96368 (32bit,SP,BE)
  116. Build Date: Fri Sep 25 11:21:49 CST 2009 (eric@dev3)
  117. Copyright (C) 2000-2008 Broadcom Corporation.
  118.  
  119. Parallel flash device: name AM29LV320MT, id 0x2201, size 16384KB
  120. CPU type 0x2A031: 400MHz, Bus: 160MHz, Ref: 64MHz
  121. CPU running TP0
  122. Total memory: 33554432 bytes (32MB)
  123. Boot Address 0xb8000000
  124.  
  125.  
  126. Board IP address : 192.168.1.1:ffffff00
  127. Host IP address : 192.168.1.100
  128. Gateway IP address :
  129. Run from flash/host (f/h) : f
  130. Default host run file name : vmlinux
  131. Default host flash file name : bcm963xx_fs_kernel
  132. Boot delay (0-9 seconds) : 1
  133. Board Id (0-4) : 96369PVG
  134. Number of MAC Addresses (1-32) : 11
  135. Base MAC Address : 20:4e:7f:1d:27:a0
  136. PSI Size (1-64) KBytes : 24
  137. Main Thread Number [0|1] : 0
  138.  
  139. *** Press any key to stop auto run (1 seconds) ***
  140. Auto run second count down: 0
  141. Booting from only image (0xb8020000) ...
  142. Code Address: 0x80010000, Entry Address: 0x80010000
  143. LZMA: Prossible old LZMA format, trying to decompress..
  144. Decompression OK!
  145. Entry at 0x80010000
  146. Closing network.
  147. Disabling Switch ports.
  148. Flushing Receive Buffers...
  149. 0 buffers found.
  150. Closing DMA Channels.
  151. Starting program at 0x80010000
  152. [ 0.000000] Linux version 3.9.8 (taxodium@dhcppc132) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37180) ) #1 Tue Sep 3 22:35:34 CEST 2013
  153. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  154. [ 0.000000] CPU frequency is 400 MHz
  155. [ 0.000000] 32MB of RAM installed
  156. [ 0.000000] registering 38 GPIOs
  157. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  158. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-102.6
  159. [ 0.000000] bootconsole [early0] enabled
  160. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  161. [ 0.000000] board_bcm963xx: board name: 96369PVG
  162. [ 0.000000] Determined physical RAM map:
  163. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  164. [ 0.000000] Initrd not found or empty - disabling initrd
  165. [ 0.000000] Zone ranges:
  166. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  167. [ 0.000000] Movable zone start for each node
  168. [ 0.000000] Early memory node ranges
  169. [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
  170. [ 0.000000] On node 0 totalpages: 8192
  171. [ 0.000000] free_area_init_node: node 0, pgdat 802f8a80, node_mem_map 81000000
  172. [ 0.000000] Normal zone: 64 pages used for memmap
  173. [ 0.000000] Normal zone: 0 pages reserved
  174. [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
  175. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  176. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  177. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  178. [ 0.000000] pcpu-alloc: [0] 0
  179. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  180. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 debug
  181. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  182. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  183. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  184. [ 0.000000] __ex_table already sorted, skipping sort
  185. [ 0.000000] Memory: 28820k/32768k available (2447k kernel code, 3948k reserved, 619k data, 260k init, 0k highmem)
  186. [ 0.000000] NR_IRQS:128
  187. [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  188. [ 0.032000] pid_max: default: 32768 minimum: 301
  189. [ 0.036000] Mount-cache hash table entries: 512
  190. [ 0.040000] NET: Registered protocol family 16
  191. [ 0.048000] registering PCI controller with io_map_base unset
  192. [ 0.056000] bio: create slab <bio-0> at 0
  193. [ 0.060000] PCI host bridge to bus 0000:00
  194. [ 0.064000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  195. [ 0.068000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  196. [ 0.072000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  197. [ 0.076000] pci 0000:00:01.0: [14e4:4322] type 00 class 0x028000
  198. [ 0.080000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff]
  199. [ 0.096000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  200. [ 0.100000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  201. [ 0.104000] Switching to clocksource MIPS
  202. [ 0.112000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  203. [ 0.116000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
  204. [ 0.144000] ssb: Found chip with id 0x4322, rev 0x01 and package 0x09
  205. [ 0.152000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
  206. [ 0.156000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
  207. [ 0.164000] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
  208. [ 0.172000] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
  209. [ 0.180000] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
  210. [ 0.188000] ssb: Core 5 found: ARM Cortex M3 (cc 0x82A, rev 0x00, vendor 0x4243)
  211. [ 0.196000] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
  212. [ 0.244000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  213. [ 0.252000] NET: Registered protocol family 2
  214. [ 0.260000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  215. [ 0.268000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  216. [ 0.272000] TCP: Hash tables configured (established 512 bind 512)
  217. [ 0.280000] TCP: reno registered
  218. [ 0.284000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  219. [ 0.288000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  220. [ 0.296000] NET: Registered protocol family 1
  221. [ 0.300000] PCI: CLS 0 bytes, default 16
  222. [ 0.304000] audit: initializing netlink socket (disabled)
  223. [ 0.312000] type=2000 audit(0.312:1): initialized
  224. [ 0.316000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  225. [ 0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  226. [ 0.332000] msgmni has been set to 56
  227. [ 0.336000] io scheduler noop registered
  228. [ 0.340000] io scheduler deadline registered (default)
  229. Ę[ 0.356000] console [ttyS0] enabled, bootconsole disabled= 10) is a bcm63xx_uart
  230. [ 0.356000] console [ttyS0] enabled, bootconsole disabled
  231. [ 0.368000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  232. [ 0.376000] physmap platform flash device: 08000000 at 18000000
  233. [ 0.384000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  234. [ 0.392000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
  235. [ 0.400000] Amd/Fujitsu Extended Query Table at 0x0040
  236. [ 0.404000] Amd/Fujitsu Extended Query version 1.3.
  237. [ 0.412000] number of CFI chips: 1
  238. [ 0.416000] bcm63xxpart: CFE boot tag found with version 6 and board type 96369PVG
  239. [ 0.424000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  240. [ 0.428000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
  241. [ 0.436000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length ea0000
  242. [ 0.444000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
  243. [ 0.452000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
  244. [ 0.460000] bcm63xxpart: Spare partition is offset 390004 and length c4fffc
  245. [ 0.464000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  246. [ 0.472000] Creating 5 MTD partitions on "physmap-flash.0":
  247. [ 0.476000] 0x000000000000-0x000000020000 : "CFE"
  248. [ 0.484000] 0x000000020100-0x000000140000 : "kernel"
  249. [ 0.488000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  250. [ 0.504000] 0x000000140000-0x000000fe0000 : "rootfs"
  251. [ 0.512000] mtd: partition "rootfs" set to be root filesystem
  252. [ 0.516000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=C40000
  253. [ 0.524000] 0x0000003a0000-0x000000fe0000 : "rootfs_data"
  254. [ 0.532000] 0x000000fe0000-0x000001000000 : "nvram"
  255. [ 0.540000] 0x000000020000-0x000000fe0000 : "linux"
  256. [ 0.548000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  257. [ 0.568000] b53-switch: probe of spi0.0 failed with error -22
  258. [ 0.608000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  259. [ 0.620000] TCP: cubic registered
  260. [ 0.624000] NET: Registered protocol family 17
  261. [ 0.628000] 8021q: 802.1Q VLAN Support v1.8
  262. [ 0.640000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  263. [ 0.648000] Freeing unused kernel memory: 260k freed
  264. procd: Console is alive
  265. [ 2.784000] SCSI subsystem initialized
  266. [ 3.060000] usbcore: registered new interface driver usbfs
  267. [ 3.068000] usbcore: registered new interface driver hub
  268. [ 3.072000] usbcore: registered new device driver usb
  269. [ 3.108000] Button Hotplug driver version 0.4.1
  270. [ 3.456000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  271. [ 3.464000] ehci-platform: EHCI generic platform driver
  272. [ 3.572000] ehci-platform ehci-platform: EHCI Host Controller
  273. [ 3.576000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  274. [ 3.584000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  275. [ 3.604000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  276. [ 3.612000] hub 1-0:1.0: USB hub found
  277. [ 3.616000] hub 1-0:1.0: 2 ports detected
  278. [ 3.632000] Initializing USB Mass Storage driver...
  279. [ 3.636000] usbcore: registered new interface driver usb-storage
  280. [ 3.644000] USB Mass Storage support registered.
  281. [ 3.648000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  282. procd: - preinit -
  283. Press the [f] key and hit [enter] to enter failsafe mode
  284. mount_root: No jffs2 marker was found
  285. procd: - early -
  286. procd: - watchdog -
  287. procd: - init -
  288. Please press Enter to activate this console.
  289. [ 9.700000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
  290. [ 9.708000] Backport generated by backports.git backports-20130617-4-ge3220f5
  291. [ 9.768000] cfg80211: Calling CRDA to update world regulatory domain
  292. [ 9.804000] cfg80211: World regulatory domain updated:
  293. [ 9.808000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  294. [ 9.816000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  295. [ 9.824000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  296. [ 9.832000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  297. [ 9.840000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  298. [ 9.848000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  299. [ 10.084000] NET: Registered protocol family 10
  300. [ 10.852000] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
  301. [ 10.904000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
  302. [ 10.908000] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2056, Revision 3
  303. [ 11.052000] Broadcom 43xx driver loaded [ Features: PNL ]
  304. [ 11.172000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  305. [ 11.708000] PPP generic driver version 2.4.2
  306. [ 11.956000] ip_tables: (C) 2000-2006 Netfilter Core Team
  307. [ 11.984000] xt_time: kernel timezone is -0000
  308. [ 12.204000] NET: Registered protocol family 24
  309. [ 12.224000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
  310. [ 13.152000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  311. [ 19.176000] device eth0 entered promiscuous mode
  312. [ 19.184000] br-lan: port 1(eth0) entered forwarding state
  313. [ 19.188000] br-lan: port 1(eth0) entered forwarding state
  314. [ 21.192000] br-lan: port 1(eth0) entered forwarding state
  315. [ 31.684000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0000: 0x5350 instead
  316. [ 31.704000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0020: 0x7070 instead
  317. [ 31.720000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0024: 0x6530 instead
  318. [ 31.736000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0028: 0x6572 instead
  319. [ 31.752000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc002c: 0x725f instead
  320. [ 31.768000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0030: 0x633d instead
  321. [ 31.784000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0034: 0x3235 instead
  322. [ 31.800000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0038: 0x6638 instead
  323. [ 31.816000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc003c: 0x6130 instead
  324. [ 31.832000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0040: 0x7070 instead
  325. [ 31.840000] jffs2: Further such events for this erase block will not be printed
  326. [ 31.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20000: 0x5531 instead
  327. [ 31.916000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20004: 0x3135 instead
  328. [ 31.932000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20008: 0x3830 instead
  329. [ 31.948000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c2000c: 0x4554 instead
  330. [ 31.964000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20010: 0x4152 instead
  331. [ 31.980000] jffs2: Empty flash at 0x00c20014 ends at 0x00c20040
  332. [ 31.988000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20040: 0x204e instead
  333. [ 32.004000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20044: 0x27a0 instead
  334. [ 32.020000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
  335. [ 32.068000] jffs2: Cowardly refusing to erase blocks on filesystem with no va
  336. [ 32.076000] jffs2: empty_blocks 96, bad_blocks 0, c->nr_blocks 98
  337. procd: - init complete -
  338.  
  339.  
  340.  
  341. BusyBox v1.19.4 (2013-09-03 18:51:21 CEST) built-in shell (ash)
  342. Enter 'help' for a list of built-in commands.
  343.  
  344. _______ ________ __
  345. | |.-----.-----.-----.| | | |.----.| |_
  346. | - || _ | -__| || | | || _|| _|
  347. |_______|| __|_____|__|__||________||__| |____|
  348. |__| W I R E L E S S F R E E D O M
  349. --------------------­--------------------
  350. BARRIER BREAKER (Bleeding Edge, r37180)
  351. -----------------------------------------------------
  352. * 1/2 oz Galliano Pour all ingredients into
  353. * 4 oz cold Coffee an irish coffee mug filled
  354. * 1 1/2 oz Dark Rum with crushed ice. Stir.
  355. * 2 tsp. Creme de Cacao
  356. -----------------------------------------------------
  357. root@OpenWrt:/# ifconfig
  358. br-lan Link encap:Ethernet HWaddr 20:4E:7F:1D:27:A0
  359. inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
  360. inet6 addr: fe80::224e:7fff:fe1d:27a0/64 Scope:Link
  361. inet6 addr: fd4a:c104:9528::1/60 Scope:Global
  362. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  363. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  364. TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
  365. collisions:0 txqueuelen:0
  366. RX bytes:0 (0.0 B) TX bytes:1606 (1.5 KiB)
  367.  
  368. eth0 Link encap:Ethernet HWaddr 20:4E:7F:1D:27:A0
  369. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  370. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  371. TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
  372. collisions:0 txqueuelen:1000
  373. RX bytes:0 (0.0 B) TX bytes:2649 (2.5 KiB)
  374.  
  375. lo Link encap:Local Loopback
  376. inet addr:127.0.0.1 Mask:255.0.0.0
  377. inet6 addr: ::1/128 Scope:Host
  378. UP LOOPBACK RUNNING MTU:65536 Metric:1
  379. RX packets:1248 errors:0 dropped:0 overruns:0 frame:0
  380. TX packets:1248 errors:0 dropped:0 overruns:0 carrier:0
  381. collisions:0 txqueuelen:0
  382. RX bytes:84864 (82.8 KiB) TX bytes:84864 (82.8 KiB)
  383.  
  384. root@OpenWrt:/# logread
  385. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.112000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  386. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.116000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
  387. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.144000] ssb: Found chip with id 0x4322, rev 0x01 and package 0x09
  388. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.152000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
  389. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.156000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
  390. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.164000] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
  391. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.172000] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
  392. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.180000] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
  393. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.188000] ssb: Core 5 found: ARM Cortex M3 (cc 0x82A, rev 0x00, vendor 0x4243)
  394. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.196000] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
  395. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.244000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  396. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.252000] NET: Registered protocol family 2
  397. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.260000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  398. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.268000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  399. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.272000] TCP: Hash tables configured (established 512 bind 512)
  400. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.280000] TCP: reno registered
  401. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.284000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  402. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.288000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  403. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.296000] NET: Registered protocol family 1
  404. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.300000] PCI: CLS 0 bytes, default 16
  405. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.304000] audit: initializing netlink socket (disabled)
  406. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.312000] type=2000 audit(0.312:1): initialized
  407. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.316000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  408. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  409. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.332000] msgmni has been set to 56
  410. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.336000] io scheduler noop registered
  411. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.340000] io scheduler deadline registered (default)
  412. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.348000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
  413. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.356000] console [ttyS0] enabled, bootconsole disabled
  414. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.368000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  415. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.376000] physmap platform flash device: 08000000 at 18000000
  416. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.384000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  417. Thu Jan 1 00:00:08 1970 auth.none kernel: [ 0.392000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
  418. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.400000] Amd/Fujitsu Extended Query Table at 0x0040
  419. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.404000] Amd/Fujitsu Extended Query version 1.3.
  420. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.412000] number of CFI chips: 1
  421. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.416000] bcm63xxpart: CFE boot tag found with version 6 and board type 96369PVG
  422. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.424000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  423. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.428000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
  424. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.436000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length ea0000
  425. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.444000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
  426. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.452000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
  427. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.460000] bcm63xxpart: Spare partition is offset 390004 and length c4fffc
  428. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.464000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  429. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.472000] Creating 5 MTD partitions on "physmap-flash.0":
  430. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.476000] 0x000000000000-0x000000020000 : "CFE"
  431. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.484000] 0x000000020100-0x000000140000 : "kernel"
  432. Thu Jan 1 00:00:08 1970 auth.err kernel: [ 0.488000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  433. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.504000] 0x000000140000-0x000000fe0000 : "rootfs"
  434. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.512000] mtd: partition "rootfs" set to be root filesystem
  435. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.516000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=C40000
  436. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.524000] 0x0000003a0000-0x000000fe0000 : "rootfs_data"
  437. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.532000] 0x000000fe0000-0x000001000000 : "nvram"
  438. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 0.540000] 0x000000020000-0x000000fe0000 : "linux"
  439. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.548000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  440. Thu Jan 1 00:00:08 1970 auth.err kernel: [ 0.568000] b53-switch: probe of spi0.0 failed with error -22
  441. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.608000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  442. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.620000] TCP: cubic registered
  443. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.624000] NET: Registered protocol family 17
  444. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.628000] 8021q: 802.1Q VLAN Support v1.8
  445. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.640000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  446. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 0.648000] Freeing unused kernel memory: 260k freed
  447. Thu Jan 1 00:00:08 1970 auth.error kernel: [ 2.784000] SCSI subsystem initialized
  448. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.060000] usbcore: registered new interface driver usbfs
  449. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.068000] usbcore: registered new interface driver hub
  450. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.072000] usbcore: registered new device driver usb
  451. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.108000] Button Hotplug driver version 0.4.1
  452. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.456000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  453. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.464000] ehci-platform: EHCI generic platform driver
  454. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.572000] ehci-platform ehci-platform: EHCI Host Controller
  455. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.576000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  456. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.584000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  457. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.604000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  458. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.612000] hub 1-0:1.0: USB hub found
  459. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.616000] hub 1-0:1.0: 2 ports detected
  460. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.632000] Initializing USB Mass Storage driver...
  461. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.636000] usbcore: registered new interface driver usb-storage
  462. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.644000] USB Mass Storage support registered.
  463. Thu Jan 1 00:00:08 1970 auth.info kernel: [ 3.648000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  464. Mon Sep 2 22:40:00 2013 authpriv.alert syslog: kmodloader: loading kernel modules from /etc/modules.d/**
  465. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.700000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
  466. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.708000] Backport generated by backports.git backports-20130617-4-ge3220f5
  467. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.768000] cfg80211: Calling CRDA to update world regulatory domain
  468. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.804000] cfg80211: World regulatory domain updated:
  469. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.808000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  470. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.816000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  471. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.824000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  472. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.832000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  473. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.840000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  474. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 9.848000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  475. Mon Sep 2 22:40:00 2013 auth.info kernel: [ 10.084000] NET: Registered protocol family 10
  476. Mon Sep 2 22:40:01 2013 auth.info kernel: [ 10.852000] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
  477. Mon Sep 2 22:40:01 2013 auth.info kernel: [ 10.904000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
  478. Mon Sep 2 22:40:01 2013 auth.none kernel: [ 10.908000] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2056, Revision 3
  479. Mon Sep 2 22:40:01 2013 auth.info kernel: [ 11.052000] Broadcom 43xx driver loaded [ Features: PNL ]
  480. Mon Sep 2 22:40:01 2013 auth.none kernel: [ 11.172000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  481. Mon Sep 2 22:40:02 2013 auth.info kernel: [ 11.708000] PPP generic driver version 2.4.2
  482. Mon Sep 2 22:40:02 2013 auth.info kernel: [ 11.956000] ip_tables: (C) 2000-2006 Netfilter Core Team
  483. Mon Sep 2 22:40:02 2013 auth.info kernel: [ 11.984000] xt_time: kernel timezone is -0000
  484. Mon Sep 2 22:40:02 2013 daemon.info sysinit: failed to insert /lib/modules/3.9.8/xt_mark.ko
  485. Mon Sep 2 22:40:02 2013 auth.info kernel: [ 12.204000] NET: Registered protocol family 24
  486. Mon Sep 2 22:40:02 2013 auth.info kernel: [ 12.224000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
  487. Mon Sep 2 22:40:03 2013 auth.info kernel: [ 13.152000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  488. Mon Sep 2 22:40:06 2013 daemon.info sysinit: Trying to fix trx header in linux at 0x0...
  489. Mon Sep 2 22:40:06 2013 daemon.info sysinit: Verifying we actually have an imagetag.
  490. Mon Sep 2 22:40:06 2013 daemon.info sysinit: Checking current fixed status.
  491. Mon Sep 2 22:40:06 2013 daemon.info sysinit: Setting root length to 0.
  492. Mon Sep 2 22:40:06 2013 daemon.info sysinit: Recalculating CRCs.
  493. Mon Sep 2 22:40:06 2013 daemon.info sysinit: Erasing imagetag block
  494. Mon Sep 2 22:40:06 2013 daemon.info sysinit: New image crc32: 0xb91040f6, rewriting block
  495. Mon Sep 2 22:40:06 2013 daemon.info sysinit: New header crc32: 0x5254aae3, rewriting block
  496. Mon Sep 2 22:40:07 2013 daemon.info sysinit: Done.
  497. Mon Sep 2 22:40:07 2013 daemon.info sysinit: 1+0 records in
  498. Mon Sep 2 22:40:07 2013 daemon.info sysinit: 1+0 records out
  499. Mon Sep 2 22:40:07 2013 daemon.info sysinit: 1+0 records in
  500. Mon Sep 2 22:40:07 2013 daemon.info sysinit: 1+0 records out
  501. Mon Sep 2 22:40:07 2013 daemon.info sysinit: 1+0 records in
  502. Mon Sep 2 22:40:07 2013 daemon.info sysinit: 1+0 records out
  503. Mon Sep 2 22:40:08 2013 daemon.info sysinit: 'radio0' is disabled
  504. Mon Sep 2 22:40:09 2013 auth.info kernel: [ 19.176000] device eth0 entered promiscuous mode
  505. Mon Sep 2 22:40:09 2013 auth.info kernel: [ 19.184000] br-lan: port 1(eth0) entered forwarding state
  506. Mon Sep 2 22:40:09 2013 auth.info kernel: [ 19.188000] br-lan: port 1(eth0) entered forwarding state
  507. Mon Sep 2 22:40:09 2013 daemon.error netifd: Interface 'lan' is now up
  508. Mon Sep 2 22:40:09 2013 daemon.error netifd: Interface 'loopback' is now up
  509. Mon Sep 2 22:40:10 2013 authpriv.error firewall: Reloading firewall due to ifup of lan (br-lan)
  510. Mon Sep 2 22:40:11 2013 daemon.emerg 6relayd[651]: Unable to open interface wan6 (No such device)
  511. Mon Sep 2 22:40:11 2013 auth.info kernel: [ 21.192000] br-lan: port 1(eth0) entered forwarding state
  512. Mon Sep 2 22:40:14 2013 daemon.info sysinit: 'radio0' is disabled
  513. Mon Sep 2 22:40:14 2013 daemon.info sysinit: 'radio0' is disabled
  514. Mon Sep 2 22:40:14 2013 daemon.info sysinit: 'radio0' is disabled
  515. Mon Sep 2 22:40:17 2013 authpriv.error dnsmasq: DNS rebinding protection is active, will discard upstream RFC1918 responses!
  516. Mon Sep 2 22:40:17 2013 authpriv.error dnsmasq: Allowing 127.0.0.0/8 responses
  517. Mon Sep 2 22:40:21 2013 daemon.info dnsmasq[786]: started, version 2.66 cachesize 150
  518. Mon Sep 2 22:40:21 2013 daemon.info dnsmasq[786]: compile time options: no-IPv6 GNU-getopt no-DBus no-i18n no-IDN DHCP no-DHCPv6 no-Lua TFTP no-conntrack no-ipset no-auth
  519. Mon Sep 2 22:40:21 2013 daemon.info dnsmasq-dhcp[786]: DHCP, IP range 192.168.1.100 -- 192.168.1.249, lease time 12h
  520. Mon Sep 2 22:40:21 2013 daemon.info dnsmasq[786]: using local addresses only for domain lan
  521. Mon Sep 2 22:40:21 2013 daemon.err dnsmasq[786]: no servers found in /tmp/resolv.conf.auto, will retry
  522. Mon Sep 2 22:40:21 2013 daemon.info dnsmasq[786]: read /etc/hosts - 1 addresses
  523. Mon Sep 2 22:40:21 2013 daemon.info dnsmasq-dhcp[786]: read /etc/ethers - 0 addresses
  524. Mon Sep 2 22:40:21 2013 daemon.info sysinit: grep: /proc/651/cmdline: No such file or directory
  525. Mon Sep 2 22:40:22 2013 daemon.info dnsmasq[786]: read /etc/hosts - 1 addresses
  526. Mon Sep 2 22:40:22 2013 daemon.info dnsmasq[786]: read /tmp/hosts/6relayd - 0 addresses
  527. Mon Sep 2 22:40:22 2013 daemon.info dnsmasq-dhcp[786]: read /etc/ethers - 0 addresses
  528. Mon Sep 2 22:40:22 2013 authpriv.emerg syslog: No jffs2 marker was found
  529. Mon Sep 2 22:40:22 2013 daemon.info sysinit: switch2jffs: No jffs2 marker was found
  530. Mon Sep 2 22:40:22 2013 authpriv.emerg syslog: no jffs2 marker found
  531. Mon Sep 2 22:40:22 2013 daemon.info sysinit: switch2jffs: no jffs2 marker found
  532. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.684000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0000: 0x5350 instead
  533. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.704000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0020: 0x7070 instead
  534. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.720000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0024: 0x6530 instead
  535. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.736000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0028: 0x6572 instead
  536. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.752000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc002c: 0x725f instead
  537. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.768000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0030: 0x633d instead
  538. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.784000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0034: 0x3235 instead
  539. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.800000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0038: 0x6638 instead
  540. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.816000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc003c: 0x6130 instead
  541. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.832000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0040: 0x7070 instead
  542. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.840000] jffs2: Further such events for this erase block will not be printed
  543. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20000: 0x5531 instead
  544. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.916000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20004: 0x3135 instead
  545. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.932000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20008: 0x3830 instead
  546. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.948000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c2000c: 0x4554 instead
  547. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.964000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20010: 0x4152 instead
  548. Mon Sep 2 22:40:22 2013 auth.err kernel: [ 31.980000] jffs2: Empty flash at 0x00c20014 ends at 0x00c20040
  549. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 31.988000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20040: 0x204e instead
  550. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 32.004000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20044: 0x27a0 instead
  551. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 32.020000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20048: 0x7f1d instead
  552. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 32.068000] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
  553. Mon Sep 2 22:40:22 2013 auth.error kernel: [ 32.076000] jffs2: empty_blocks 96, bad_blocks 0, c->nr_blocks 98
  554. Mon Sep 2 22:40:22 2013 authpriv.emerg syslog: failed - mount -t jffs2 /dev/mtdblock3 /rom/overlay: Input/output error
  555. Mon Sep 2 22:40:22 2013 daemon.info sysinit: switch2jffs: failed - mount -t jffs2 /dev/mtdblock3 /rom/overlay: Input/output error
  556. Mon Sep 2 22:40:23 2013 daemon.info sysinit: - init complete -
  557. Mon Sep 2 22:40:38 2013 security.info dropbear[827]: Not backgrounding
  558. root@OpenWrt:/# dmesg
  559. [ 0.000000] Linux version 3.9.8 (taxodium@dhcppc132) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r37180) ) #1 Tue Sep 3 22:35:34 CEST 2013
  560. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  561. [ 0.000000] CPU frequency is 400 MHz
  562. [ 0.000000] 32MB of RAM installed
  563. [ 0.000000] registering 38 GPIOs
  564. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  565. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-102.6
  566. [ 0.000000] bootconsole [early0] enabled
  567. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  568. [ 0.000000] board_bcm963xx: board name: 96369PVG
  569. [ 0.000000] Determined physical RAM map:
  570. [ 0.000000] memory: 02000000 @ 00000000 (usable)
  571. [ 0.000000] Initrd not found or empty - disabling initrd
  572. [ 0.000000] Zone ranges:
  573. [ 0.000000] Normal [mem 0x00000000-0x01ffffff]
  574. [ 0.000000] Movable zone start for each node
  575. [ 0.000000] Early memory node ranges
  576. [ 0.000000] node 0: [mem 0x00000000-0x01ffffff]
  577. [ 0.000000] On node 0 totalpages: 8192
  578. [ 0.000000] free_area_init_node: node 0, pgdat 802f8a80, node_mem_map 81000000
  579. [ 0.000000] Normal zone: 64 pages used for memmap
  580. [ 0.000000] Normal zone: 0 pages reserved
  581. [ 0.000000] Normal zone: 8192 pages, LIFO batch:0
  582. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  583. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  584. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  585. [ 0.000000] pcpu-alloc: [0] 0
  586. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8128
  587. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200 debug
  588. [ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
  589. [ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
  590. [ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
  591. [ 0.000000] __ex_table already sorted, skipping sort
  592. [ 0.000000] Memory: 28820k/32768k available (2447k kernel code, 3948k reserved, 619k data, 260k init, 0k highmem)
  593. [ 0.000000] NR_IRQS:128
  594. [ 0.028000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  595. [ 0.032000] pid_max: default: 32768 minimum: 301
  596. [ 0.036000] Mount-cache hash table entries: 512
  597. [ 0.040000] NET: Registered protocol family 16
  598. [ 0.048000] registering PCI controller with io_map_base unset
  599. [ 0.056000] bio: create slab <bio-0> at 0
  600. [ 0.060000] PCI host bridge to bus 0000:00
  601. [ 0.064000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  602. [ 0.068000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  603. [ 0.072000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  604. [ 0.076000] pci 0000:00:01.0: [14e4:4322] type 00 class 0x028000
  605. [ 0.080000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x00003fff]
  606. [ 0.096000] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  607. [ 0.100000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  608. [ 0.104000] Switching to clocksource MIPS
  609. [ 0.112000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  610. [ 0.116000] b43-pci-bridge 0000:00:01.0: setting latency timer to 64
  611. [ 0.144000] ssb: Found chip with id 0x4322, rev 0x01 and package 0x09
  612. [ 0.152000] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x17, vendor 0x4243)
  613. [ 0.156000] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x10, vendor 0x4243)
  614. [ 0.164000] ssb: Core 2 found: PCI-E (cc 0x820, rev 0x0B, vendor 0x4243)
  615. [ 0.172000] ssb: Core 3 found: PCI (cc 0x804, rev 0x0E, vendor 0x4243)
  616. [ 0.180000] ssb: Core 4 found: USB 2.0 Device (cc 0x81A, rev 0x05, vendor 0x4243)
  617. [ 0.188000] ssb: Core 5 found: ARM Cortex M3 (cc 0x82A, rev 0x00, vendor 0x4243)
  618. [ 0.196000] ssb: Core 6 found: Internal Memory (cc 0x80E, rev 0x03, vendor 0x4243)
  619. [ 0.244000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:01.0
  620. [ 0.252000] NET: Registered protocol family 2
  621. [ 0.260000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
  622. [ 0.268000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
  623. [ 0.272000] TCP: Hash tables configured (established 512 bind 512)
  624. [ 0.280000] TCP: reno registered
  625. [ 0.284000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  626. [ 0.288000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  627. [ 0.296000] NET: Registered protocol family 1
  628. [ 0.300000] PCI: CLS 0 bytes, default 16
  629. [ 0.304000] audit: initializing netlink socket (disabled)
  630. [ 0.312000] type=2000 audit(0.312:1): initialized
  631. [ 0.316000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  632. [ 0.324000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  633. [ 0.332000] msgmni has been set to 56
  634. [ 0.336000] io scheduler noop registered
  635. [ 0.340000] io scheduler deadline registered (default)
  636. [ 0.348000] bcm63xx_uart.0: ttyS0 at MMIO 0xb0000100 (irq = 10) is a bcm63xx_uart
  637. [ 0.356000] console [ttyS0] enabled, bootconsole disabled
  638. [ 0.368000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  639. [ 0.376000] physmap platform flash device: 08000000 at 18000000
  640. [ 0.384000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  641. [ 0.392000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
  642. [ 0.400000] Amd/Fujitsu Extended Query Table at 0x0040
  643. [ 0.404000] Amd/Fujitsu Extended Query version 1.3.
  644. [ 0.412000] number of CFI chips: 1
  645. [ 0.416000] bcm63xxpart: CFE boot tag found with version 6 and board type 96369PVG
  646. [ 0.424000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  647. [ 0.428000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
  648. [ 0.436000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length ea0000
  649. [ 0.444000] bcm63xxpart: Partition 3 is nvram offset fe0000 and length 20000
  650. [ 0.452000] bcm63xxpart: Partition 4 is linux offset 20000 and length fc0000
  651. [ 0.460000] bcm63xxpart: Spare partition is offset 390004 and length c4fffc
  652. [ 0.464000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  653. [ 0.472000] Creating 5 MTD partitions on "physmap-flash.0":
  654. [ 0.476000] 0x000000000000-0x000000020000 : "CFE"
  655. [ 0.484000] 0x000000020100-0x000000140000 : "kernel"
  656. [ 0.488000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  657. [ 0.504000] 0x000000140000-0x000000fe0000 : "rootfs"
  658. [ 0.512000] mtd: partition "rootfs" set to be root filesystem
  659. [ 0.516000] mtd: partition "rootfs_data" created automatically, ofs=3A0000, len=C40000
  660. [ 0.524000] 0x0000003a0000-0x000000fe0000 : "rootfs_data"
  661. [ 0.532000] 0x000000fe0000-0x000001000000 : "nvram"
  662. [ 0.540000] 0x000000020000-0x000000fe0000 : "linux"
  663. [ 0.548000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  664. [ 0.568000] b53-switch: probe of spi0.0 failed with error -22
  665. [ 0.608000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  666. [ 0.620000] TCP: cubic registered
  667. [ 0.624000] NET: Registered protocol family 17
  668. [ 0.628000] 8021q: 802.1Q VLAN Support v1.8
  669. [ 0.640000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  670. [ 0.648000] Freeing unused kernel memory: 260k freed
  671. [ 2.784000] SCSI subsystem initialized
  672. [ 3.060000] usbcore: registered new interface driver usbfs
  673. [ 3.068000] usbcore: registered new interface driver hub
  674. [ 3.072000] usbcore: registered new device driver usb
  675. [ 3.108000] Button Hotplug driver version 0.4.1
  676. [ 3.456000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  677. [ 3.464000] ehci-platform: EHCI generic platform driver
  678. [ 3.572000] ehci-platform ehci-platform: EHCI Host Controller
  679. [ 3.576000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  680. [ 3.584000] ehci-platform ehci-platform: irq 15, io mem 0xb0001500
  681. [ 3.604000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00, overcurrent ignored
  682. [ 3.612000] hub 1-0:1.0: USB hub found
  683. [ 3.616000] hub 1-0:1.0: 2 ports detected
  684. [ 3.632000] Initializing USB Mass Storage driver...
  685. [ 3.636000] usbcore: registered new interface driver usb-storage
  686. [ 3.644000] USB Mass Storage support registered.
  687. [ 3.648000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  688. [ 9.700000] Loading modules backported from Linux version master-2013-06-27-0-gdcfa6d5
  689. [ 9.708000] Backport generated by backports.git backports-20130617-4-ge3220f5
  690. [ 9.768000] cfg80211: Calling CRDA to update world regulatory domain
  691. [ 9.804000] cfg80211: World regulatory domain updated:
  692. [ 9.808000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  693. [ 9.816000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  694. [ 9.824000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  695. [ 9.832000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  696. [ 9.840000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  697. [ 9.848000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  698. [ 10.084000] NET: Registered protocol family 10
  699. [ 10.852000] b43-phy0: Broadcom 4322 WLAN found (core revision 16)
  700. [ 10.904000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 4
  701. [ 10.908000] b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2056, Revision 3
  702. [ 11.052000] Broadcom 43xx driver loaded [ Features: PNL ]
  703. [ 11.172000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  704. [ 11.708000] PPP generic driver version 2.4.2
  705. [ 11.956000] ip_tables: (C) 2000-2006 Netfilter Core Team
  706. [ 11.984000] xt_time: kernel timezone is -0000
  707. [ 12.204000] NET: Registered protocol family 24
  708. [ 12.224000] nf_conntrack version 0.5.0 (454 buckets, 1816 max)
  709. [ 13.152000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  710. [ 19.176000] device eth0 entered promiscuous mode
  711. [ 19.184000] br-lan: port 1(eth0) entered forwarding state
  712. [ 19.188000] br-lan: port 1(eth0) entered forwarding state
  713. [ 21.192000] br-lan: port 1(eth0) entered forwarding state
  714. [ 31.684000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0000: 0x5350 instead
  715. [ 31.704000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0020: 0x7070 instead
  716. [ 31.720000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0024: 0x6530 instead
  717. [ 31.736000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0028: 0x6572 instead
  718. [ 31.752000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc002c: 0x725f instead
  719. [ 31.768000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0030: 0x633d instead
  720. [ 31.784000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0034: 0x3235 instead
  721. [ 31.800000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0038: 0x6638 instead
  722. [ 31.816000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc003c: 0x6130 instead
  723. [ 31.832000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00bc0040: 0x7070 instead
  724. [ 31.840000] jffs2: Further such events for this erase block will not be printed
  725. [ 31.900000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20000: 0x5531 instead
  726. [ 31.916000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20004: 0x3135 instead
  727. [ 31.932000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20008: 0x3830 instead
  728. [ 31.948000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c2000c: 0x4554 instead
  729. [ 31.964000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20010: 0x4152 instead
  730. [ 31.980000] jffs2: Empty flash at 0x00c20014 ends at 0x00c20040
  731. [ 31.988000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20040: 0x204e instead
  732. [ 32.004000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20044: 0x27a0 instead
  733. [ 32.020000] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00c20048: 0x7f1d instead
  734. [ 32.068000] jffs2: Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
  735. [ 32.076000] jffs2: empty_blocks 96, bad_blocks 0, c->nr_blocks 98
  736. root@OpenWrt:/# swconfig
  737. swconfig list
  738. swconfig dev <dev> [port <port>|vlan <vlan>] (help|set <key> <value>|get <key>|load <config>|show)
  739. root@OpenWrt:/# swconfig list
  740. root@OpenWrt:/# swconfig dev show
  741. swconfig list
  742. swconfig dev <dev> [port <port>|vlan <vlan>] (help|set <key> <value>|get <key>|load <config>|show)
  743. root@OpenWrt:/# ?
  744. /bin/ash: ?: not found
  745. root@OpenWrt:/# swconfig
  746. swconfig list
  747. swconfig dev <dev> [port <port>|vlan <vlan>] (help|set <key> <value>|get <key>|load <config>|show)
  748. root@OpenWrt:/# swconfig show
  749. swconfig list
  750. swconfig dev <dev> [port <port>|vlan <vlan>] (help|set <key> <value>|get <key>|load <config>|show)
  751. root@OpenWrt:/# swconfig list
  752. root@OpenWrt:/# cat /etc/
  753. TZ hotplug.d/ profile
  754. banner hotplug.json protocols
  755. config/ init.d/ rc.button/
  756. crontabs/ inittab rc.common
  757. diag.sh modules-boot.d/ rc.d/
  758. dnsmasq.conf modules.d/ rc.local
  759. dropbear/ mtab resolv.conf
  760. ethers openwrt_release services
  761. firewall.user openwrt_version shadow
  762. fstab opkg.conf shells
  763. group passwd sysctl.conf
  764. hosts ppp/ sysupgrade.conf
  765. hotplug-preinit.json preinit uci-defaults/
  766. root@OpenWrt:/# cat /etc/ethers
  767. root@OpenWrt:/# cd /etc/config
  768. root@OpenWrt:/etc/config# ls
  769. 6relayd dropbear luci system uhttpd
  770. dhcp firewall network ucitrack wireless
  771. root@OpenWrt:/etc/config# cat /etc/config/network
  772.  
  773. config interface 'loopback'
  774. option ifname 'lo'
  775. option proto 'static'
  776. option ipaddr '127.0.0.1'
  777. option netmask '255.0.0.0'
  778.  
  779. config globals 'globals'
  780. option ula_prefix 'fd4a:c104:9528::/48'
  781.  
  782. config interface 'lan'
  783. option ifname 'eth0'
  784. option type 'bridge'
  785. option proto 'static'
  786. option ipaddr '192.168.1.1'
  787. option netmask '255.255.255.0'
  788. option ip6assign '60'
  789.  
  790. root@OpenWrt:/etc/config#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement